LINE 21 INTERNET ACCESS THROUGHOUT THE HOUSE Fed up with your Internet access being restricted to a single room? Would you like access available in any room in the house that has a telephone socket? For example in the living room? No problem. All you have to do is exchange the existing phone sockets for Line 21 sockets. EXAMPLE: RETROFITTING DSL WITH LINE 21 1st telephone jack Splitter Modem Line 21 RJ45 8/8 Existing cable (max. 50 m) four-core Line 21 combination socket Line 21 uses the existing telephone line not only for making phone calls but also for surfi ng the Internet or creating PC networks. It couldn t be simpler. Requirements Work required Telephone line between transfer point of the network operator (e.g. British Telecom) and the PC to be equipped with DSL Required accessories A Line 21 connection socket RJ45 8/8 (near the fi rst telephone jack) and surface-mounted housing if required A Line 21 connection socket (combination socket-outlet) for the existing telephone jack at the PC All four cores must be laid at both sockets Tip Locate additional devices, such as splitters or modems, centrally in the appropriate distribution box. 228 SYSTEM ELECTRONICS Network technology 2005
MERTEN@HOME ALWAYS AT HOME, WHEREVER YOU ARE CONTENTS Merten not only makes your home and business life simpler and more comfortable. It also makes it more mobile, with the new merten@home user interface for the control of all building management functions. Merten@home is intuitive to use and allows you to conveniently control building functions in your home, holiday home or business premises via PDA, touchscreen, laptop or television. 271 NETWORK TECHNOLOGY 271 Line 21 271 Network components 272 Communications inserts and accessories 275 INTERNET CONTROLLER 275 INSTABUS EIB Internet controller 275 System components and accessories No matter where you are, you are always at home. Merten@home the control interface of the IC 1. IC 1 is the fi rst complete system for controlling building technology via the Internet. Buildings and systems can be remote-controlled and checked effortlessly using a standard browser without any special knowledge or additional software. All you need is Internet access, a WAP-enabled mobile phone or a PDA with Internet access. SYSTEM ELECTRONICS 2005 merten@home SYSTEM ELECTRONICS 229
Line 21 Network technologynetwork technologysystem electronicsnetwork technology Simultaneous transmission of analogue telephone signals and Ethernet using a single existing telephone line Technology: It is not necessary to install an additional line. The existing telephone sockets are simply replaced with Line 21 sockets. This means that the existing telephone line (4-core) becomes an extended network for two services, analogue telephony and PC networking. Possible applications include analogue telephony plus: Networking all PCs in the house or Extension of a DSL link or Connecting a digital video recorder in the network or Connecting surveillance cameras with networking capability or Using printers in a shared network Technical Information: Line 21 ( p. 441) Line 21 Combination socket-outlet RJ45/ With integrated Line 21 technology. For connecting an analogue telephone/telecommunications system () and a digital network device (RJ45, 8-pole) such as PC, HUB, router, Merten switch (art. no. 465711) or IC 1 (art. no. 6950.., 6951...) With 4 screw terminals for the installation line and 2 for the connection of additional telephone socket-outlets. Cable length: max. 50 m Transmission rate: max. 100 Mbit/s To be completed with: Central plate for telephone socket-outlet, art. no. 2928.., 2979.., 2978.. or 2938... Technical Information: Line 21 Combination socket-outlet RJ45/ ( p. 442) Line 21 Patch panel REG, 6-gang With integrated Line 21 technology. Distribution board for simple changing of jumper cables without altering the wiring. With six lockable RJ45 ports, LSA+ terminal blocks. For installation on DIN rails EN 50022. For connecting analogue telephones/telecommunications systems and digital network devices (RJ45, 8-pole) such as PC, HUB, router, Merten switch (art. no. 465711) or IC 1 (art. no. 6950.., 6951...) With 2 LSA+ terminal blocks for the installation line and analogue telephony. Cable length: max. 50 m Transmission rate: max. 100 Mbit/s (per installed line) Type of protection: IP 20 Device width: 6 modules = 108 mm Accessories: Patch cable RJ45/RJ45, art. no. 465710. Technical Information: Line 21 Patch panel REG, 6-gang ( p. 442) light grey 465714 1/16 1 Line 21 Patch cable RJ45/ Cable for connecting Line 21 RJ45 insert (art. no. 465708) and analogue telephones/telecommunications systems. Length: 35 cm grey/black 465713 1/150 1 8(6)-6F+N 465709 1/60 1 Line 21 RJ45 insert 8/8 With integrated Line 21 technology. For connecting an analogue telephone/telecommunications system (RJ45, 8-pole) and a digital network device (RJ45, 8-pole) such as PC, HUB, router, Merten switch (art. no. 465711) or IC 1 (art. no. 6950.., 6951...) With 4 screw terminals for the installation line and 2 for analogue telephony. Cable length: max. 50 m Transmission rate: max. 100 Mbit/s To be completed with:, art. Technical Information: Line 21 RJ45 insert 8/8 ( p. 442) Network components Patch panel REG, 6-gang Distribution board for simple changing of jumper cables without altering the wiring. With six lockable RJ45 ports, LSA+ terminal blocks. For installation on DIN rails EN 50022. Category: CAT 5e Type of protection: IP 20 Device width: 6 modules = 108 mm Accessories: Patch cable RJ45/RJ45, art. no. 465710. light grey 465712 1/16 1 NETWORK TECHNOLOGY 465708 1/60 1 2005 Network technology SYSTEM ELECTRONICS 271
Switch REG, 5-gang For targeted distribution of data to individual subscribers. The switch supports a data transfer rate of up to 100 Mbps. With five lockable RJ45 ports and integrated power supply unit. For installation on DIN rails EN 50022. Supply voltage: AC 230 V Category: CAT 5e Display elements: LEDs per port for operating display and service function Type of protection: IP 20 Device width: 6 modules = 108 mm Accessories: Patch cable RJ45/RJ45, art. no. 465710. light grey 465711 1/15 1 Patch cable RJ45/RJ45 Cable for establishing a connection between the patch panel and the switch. Length: 35 cm 1-gang With labelling field. For System Design. For RJ45 inserts 8 (Cat 5e), RJ45 inserts by Rutenbeck or E-DAT designs by To be completed with: RJ45 insert 8, art. no. 465720. RJ45 insert 8 Cat 5e, art. no. 465721. Accessories: Labelling strips for switches, socket-outlets, art. no. 395019 white 291844 10/120 1 TP polar white 291819 10/120 1 TP aluminium 291860 10/120 1.1 ML stainless steel 291846 10/120 1.1 M RJ45 insert 8 For connecting analogue or digital terminals using an 8-pole RJ45 socket. grey 465710 10/150 1 To be completed with: 1-gang, art. no. 2917.., 2983.., 2918... 465720 10/40 1 Communications inserts and accessories 1-gang For RJ45 inserts 8 (Cat 5e), RJ45 inserts by Rutenbeck or E-DAT designs by To be completed with: RJ45 insert 8, art. no. 465720. RJ45 insert 8 Cat 5e, art. no. 465721. white 291774 10/120 1 TP polar white 291719 10/120 1 TP 1-gang For RJ45 inserts 8 (Cat 5e), RJ45 inserts by Rutenbeck or E-DAT designs by To be completed with: RJ45 insert 8, art. no. 465720. RJ45 insert 8 Cat 5e, art. no. 465721. white 298344 10/120 1 TP polar white 298319 10/120 1 TP anthracite 298314 10/120 1.1 TP aluminium 298360 10/120 1.1 ML RJ45 insert 8 Cat 5e For connecting analogue or digital terminals using an 8-pole RJ45 socket. Connection via LSA terminals. To be completed with: 1-gang, art. no. 2917.., 2983.., 2918... 465721 1/50 1 white 292774 10/120 1 TP polar white 292719 10/120 1 TP 272 SYSTEM ELECTRONICS Network technology 2005
white 298044 10/120 1 TP polar white 298019 10/120 1 TP anthracite 298014 10/120 1.1 TP aluminium 298060 10/120 1.1 ML With labelling field. For System Design. Accessories: Labelling strips for switches, socket-outlets, art. no. 395019 white 292644 10/120 1 TP polar white 292619 10/120 1 TP vanilla 292682 10/120 1.2 TP ice blue 292688 10/120 1.2 TP light grey 292629 10/120 1.2 TP midnight blue 292678 10/120 1.2 TP dark brazil 292615 10/120 1.2 TP black grey 292669 10/120 1.2 TP aluminium 292660 10/120 1.2 ML antique brass 292643 10/120 1.4 M stainless steel 292646 10/120 1.2 M For OCTOCOLOR. white 292044 10/120 1 TP polar white 292019 10/120 1 TP bronze metallic 292042 10/120 1.2 ML titanium 292005 10/120 1.2 ML RJ45 insert 8/8 via two 8-pole RJ45 connectors. To be completed with:, art. Technical Information: RJ45 insert 8/8 ( p. 443) 465701 10/40 1 RJ45 insert 2x8 via two 8-pole RJ45 connectors connected in parallel with bus-type cabling. To be completed with:, art. Technical Information: RJ45 insert 2x8 ( p. 443) 465702 10/40 1 RJ45 insert 8/8 Cat 5e via two 8-pole RJ45 connectors. Connection via LSA terminals. To be completed with:, art. 465703 1/50 1 RJ45 insert 8/8 Cat 6 via two 8-pole RJ45 connectors. Connection via LSA terminals. To be completed with:, art. 465706 1/50 1 For telephone socket-outlets or TDO, combination socket-outlets RJ45/ or flush-mounted NETWORK TECHNOLOGY white 292874 5/150 1 TP polar white 292819 5/150 1 TP 2005 Network technology SYSTEM ELECTRONICS 273
For telephone socket-outlets or TDO, combination socket-outlets RJ45/ or flush-mounted white 297944 5/150 1 TP polar white 297919 5/150 1 TP anthracite 297914 5/150 1.1 TP aluminium 297960 5/150 1.1 ML For telephone socket-outlets or TDO, combination socket-outlets RJ45/ or flush-mounted Accessories: Labelling strips for switches, socket-outlets, art. no. 395019 white 297844 1/150 1 TP polar white 297819 1/150 1 TP vanilla 297882 1/150 1.2 TP ice blue 297888 1/150 1.2 TP light grey 297829 1/150 1.2 TP midnight blue 297878 1/150 1.2 TP dark brazil 297815 1/150 1.2 TP black grey 297869 1/150 1.2 TP aluminium 297860 1/150 1.2 ML antique brass 297843 1/150 1.4 M stainless steel 297846 1/150 1.2 M For telephone socket-outlets or TDO, combination socket-outlets RJ45/ or flush-mounted white 293844 1/150 1 TP polar white 293819 1/150 1 TP bronze metallic 293842 1/150 1.2 M titanium 293805 1/150 1.2 M Combination socket-outlet RJ45/ (Cat 3) For connecting a telephone and an analogue or digital terminal unit via the 8-pole RJ45 connector. To be completed with: Central plate for telephone socket-outlet, art. no. 2928.., 2979.., 2978.. or 2938... Technical Information: Combination socket-outlet RJ45/ (Cat 3) ( p. 443) 8(6)-6F+N 465707 1/60 1 insert, 1-gang polar white 292219 5/150 1 TP insert, 1-gang polar white 291119 5/150 1 TP anthracite 291114 5/150 1.1 TP aluminium 291160 5/150 1.1 ML insert, polar white 291919 5/150 1 TP insert, polar white 291219 5/150 1 TP anthracite 291214 5/150 1.1 TP aluminium 291260 5/150 1.1 ML 274 SYSTEM ELECTRONICS Network technology 2005
INTERNET CONTROLLER Internet controllerinternet controllersystem electronicsinternet controller INSTABUS EIB Internet controller System components and accessories The functions Remote control, interrogation and surveillance. Remote alarm to mobile phone or to a maximum of 32 e-mail recipients. Fault indication via e-mail. Video surveillance with live video footage and picture storage as well as event-oriented recording. Recording of loads, performance curves and temperatures, max. 6 values. Curve graphs. Graphic macro programming. IC 1 EIB Internet controller REG-K Monitoring and control of systems and buildings via the Internet. An Internet connection is established using art. no. 695102 via the integrated analogue modem (56 kbit/s) 695103 via the integrated ISDN modem (64 kbit/s) With LAN/Ethernet interface for networking up to 32 additional IC 1 devices. Commissioning via the Internet, Ethernet or PC. With integrated bus coupler. For installation on DIN rails EN 50022, a data rail is not necessary. A separate power supply is not required. Power consumption: 5 watt Power supply: DC 12-30 V EIB objects: 256 Interfaces: 2xUSB for video adapter 1xRJ45 Ethernet 10/100 Mbit/s Art. no. 695102: 1xRJ45 analogue modem, 56 kbit/s Art. no. 695103: 1xRJ45 ISDN, 64 kbit/s Video images: 320x240 up to max. 640x480 Video memory: max. 128 images Historical memory: 128,000 data points/channel Year time switch: with 32 programs, DCF-77 synchronised via Domoport Macros: max. 16 parallel macros, 32 programmable internal variables, logical, mathematical, comparative and chronological function modules. Device width: 9 modules = 162 mm In INSTABUS EIB, to be completed with: Power supply 24 V DC REG-K, art. no. 693001. Power supply, art. no. 683729 or art. no. 683829 (via free outlet). Power supply 320 REG-K with battery connection, art. no. 683129 and lead gel battery, art. no. 668990 for buffering the supply voltage in the case of a mains failure. Accessories: USB video adapter REG-K, art. no. 668101. Note: Devices will be available in Q1 2005 with the new user interface "Merten@Home". Contents: User manual on CD, registration data for Domoport, 3 m cable for each network, crosslink and telephone, antenna with magnetic foot and connecting cable, art. no. 695104. analogue 695102 1/3 9.3 ISDN 695103 1/3 9.3 Power supply 320 REG-K with battery connection For generating the bus voltage for a line with up to 64 bus devices. With integrated choke to decouple the power supply from the bus and a switch to disconnect the power and reset the bus devices connected to the line. Can be connected to the mains with plug-in screw terminals. For installation on DIN rails EN 50022. The bus is connected using a bus connecting terminal; a data rail is not necessary. External lead gel batteries with a DC 12 V (SELV) voltage can be connected to the emergency power input for buffering the bus voltage or IC 1 Internet controller power supply. The integral buffer circuit ensures that the 6-15 Ah lead gel batteries are used as buffers or recharged. Mains voltage: AC 230 V, 50-60 Hz Emergency input: for lead gel battery 6-15 Ah with DC 12 V (SELV) Charge retention current: max. 250 ma Output voltage: DC 29 V ±1 V Output current: max. 320 ma, short-circuit-proof Device width: 5 modules = approx. 90 mm Accessories: Lead gel battery, art. no. 668990. Accessories from: IC 1 Internet controller REG-K, art. no. 6950... IC 1 EIB Internet controller REG-K, art. no. 6951... Contents: With bus connecting terminal and cable cover. light grey 683129 1/21 9.3 Lead gel battery Lead gel battery to connect to the emergency input of the power supply 320 REG-K with battery connection. Also for powering the outdoor siren with flashlight, TeleConnect or IC 1 Internet controller. Nominal voltage: DC 12 V Capacity: 7.2 Ah In INSTABUS EIB, to be completed with: Power supply 320 REG-K with battery connection, art. no. 683129. 7.2 Ah 668990 1/2 8.2 USB video adapter REG-K For live image transfer from an analogue video camera. For installation on DIN rails EN 50022. Power supply: via USB connection USB connection USB connection socket type B USB cable length: max. 5 m Video input: NTSC/PAL video signal, 1.0 Vss, 75 ohm Device width: 2 modules = approx. 36 mm To be completed with: IC 1 Internet controller REG-K, art. no. 6950... IC 1 EIB Internet controller REG-K, art. no. 6951... Contents: With USB cable. INTERNET CONTROLLER light grey 668101 1/6 9 2005 Internet controller SYSTEM ELECTRONICS 275