Application Note (Revision NEW, 9/2004) Original Instructions Simple Generator Drive Steam Turbine Applications

Similar documents
2301D ST Digital Load Sharing and Speed Control

2301E ST Steam Turbine Control for Small Generator Applications

EGCP-2. Application Note (Revision NEW, 4/2003) Original Instructions

Application Note (Revision NEW) Original Instructions. EGCP-2 Differences

EGCP-3 LS Revision R Software Revision M. Application Note (Revision NEW, 6/2009) Original Instructions

Wiring Instructions for Replacement of 2301A Load Sharing and Speed Controls with 2301D Load Sharing and Speed Controls

Application Note (Revision NEW) Original Instructions. Upgrading DRFDs to SPCs

LVDT Test Device. Product Manual (Revision B) Original Instructions. Testing and Calibration of LVDT Feedback Devices on PG Governors

505 Enhanced Digital Control for Steam Turbines (with Redundancy)

Input Power Selector Switch. Product Manual (Revision NEW) Original Instructions for use with Generator Set Control Assembly

Application Note (Revision C, 9/2014) Original Instructions ProAct Gen 1 Position Sensor Update

Application Note (Revision NEW) Original Instructions EGCP-3 LS Using an EGCP-3 in a Single-Phase Zig Zag Generator Application

Application Note (Revision NEW) Original Instructions. Wiring Instructions for 2301A Controls Replacing Caterpillar 2301 Controls

EGCP-3 LS Revision L. Application Note (Revision NEW, 12/2006) Original Instructions

RVDT Setup and Polarity Checking Tool for EG Governors. Product Manual (Revision B) Original Instructions T87444

Application Note (Revision NEW) Original Instructions PLCs for Turbine Control Systems

Replacement of GCP-10 Series with easygen-1500 Application Note

Si-TEC Xtend CGC DATA SHEET. Digital control range for steam turbine generators. Key features. Models. Description

easygen-3000 Series (Packages P2) Genset Control

Si-TEC Xtend CGC ET DATA SHEET. Digital control range for extraction steam turbines. Key features. Models. Description

MicroNet TMR Control System

Application Note (Revision A, 6/2002) Original Instructions. 723PLUS/DSLC Network Binding Procedure. LonMaker for DOS

Vertex Pro Motor Driven Compressor Control

2301D-ST Digital Electronic Load Sharing & Speed Control for Small Steam Turbines. Product Manual (Revision G) Original Instructions

505 Digital Control for Steam Turbines. Product Manual 26839V2 (Revision NEW, 2/2015) Original Instructions , ,

Peak200 Digital Control for Steam Turbines

Features. Application range. Si-TEC Xtend Recip interface. Accumulated data recording of engine running hours, kwatt hours, kvar hours, etc.

Vertex. Compressor Control. Applications. Product Specification (Revision B, 3/2018)

505 & 505-XT CONTROLLERS

Expertise beyond controls Vantage GP GD

310SV SINGLE VALVE GOVERNOR

FLEX500-HF Digital Turbine Control - Hydro Francis

OLYMPUS. Gas and Steam Turbine Controls. Applicable to any size type or make of gas or steam turbine. User expandable, configurable and programmable

Installation and Operation Manual. GTC250A Gas Turbine Control for Generator or Compressor Applications Manual 26433

723PLUS Digital Speed Control for Reciprocating Engines Analog Load Sharing. Product Manual (Revision B) Original Instructions

Installation and Operation Manual. 505E Digital Governor for Extraction Steam Turbines. Volume 1. Manual 85018V1B

Si-TEC Xtend GSM DATA SHEET. Digital control range for grid parallel/bus tie. Key features. Description

723PLUS Digital Speed Control for Reciprocating Engines DSLC Compatible

310SV SOFTWARE CONFIGURATION FORM

Using the proconx GCP-MG Communication Gateway with the GCP-30 and LS-4 Controls. Application Note 51306

SIGMA. Advanced Generator Protection and Control. Short Form Catalogue

Motion Gets Smarter with Integrated Actuators

BMS Steam Station Solutions

Installation and Operation Manual. OpView Operator Interface for Woodward 505 and 505E Controls. Manual (Revision B)

Series 2400 Paralleling Switchgear

OpView Operator Interface for Woodward 505 and 505E Controls. Product Manual (Revision B) Original Instructions

PRODUCT INFORMATION. AUMA Actuators, Inc. Pittsburgh PA USA. Triple Play Digital Communications Board DeviceNet / Modbus CDN455

3500 ENCORE System Overview Bently Nevada* Asset Condition Monitoring

MSLC Master Synchronizer and Load Control. Installation and Operation Manual

PGC 4000v2 POWER GENERATION CONTROLLER

Application Note (Revision C) Original Instructions. Application Solutions for Wear Mitigation of the 3103 EM-35MR Actuator

PRODUCT INFORMATION. DeviceNet Triple Play Digital Communications Board. SA Actuator with AUMA Matic Motor Controls

TABLE OF CONTENTS INTRODUCTION. 3. Analog Input Analog Output Digital Input Digital Output OPERATIONAL DESCRIPITON.. 7 PROGRAMMING AND INITIAL SETUP.

Product Manual Original Instructions. 733 Digital Speed Control Oil India. Application and Hardware Manual

HART. Actuator Control. Redefining Flow Control

Electronic Control Options for Automatic Control Valves. Jody Malo Singer Valve

EGCP-2 Engine Generator Control Package. Product Manual (Revision E) Original Instructions

Fault Tolerant Protection System (Safety PLC with Integrated Overspeed Protection)

The LVS Directional Valve with Digital Pilot Control A New Generation

Application Note (Revision NEW) Original Instructions. Replacing the EGS-01 Gas Engine Control with an EGS Full Authority Control System

GE Zenith ZDEC Modular Paralleling Switchgear

Power System Network Simulator (PSNsim)

An OR Operation. Or (O) Function I0.4 Q0.1 I0.5 I0.5 I0.4 Q0.1. Input 3. Input 4. Output 2

Mark* VIe Redundancy Overview of System Options

Data sheet MK 20 GR. Customized solution or off-the-shelf: The choice is yours!

INTRINSICALLY SAFE INSTRUMENTATION FOR HAZARDOUS AREAS

D115 The Fast Optimal Servo Amplifier For Brush, Brushless, Voice Coil Servo Motors

MP-2000 Dual Channel LVDT/RVDT Readout/Controller

Generator Protection Unit, GPU Hydro Multi-line A SW version 2.4X.X

What is new in the easygen3000xt

4-step Chiller and Heat Pump Controller

UDC 1000 and UDC 1500 MICRO-PRO SERIES UNIVERSAL DIGITAL CONTROLLERS

INSTRUCTION MANUAL FOR VAR/POWER FACTOR CONTROLLER SCP

GE Power Management. MMII Intelligent MCC Controller

LCC SERIES-2 SMALL TURBINE GOVERNORS TECHNICAL DESCRIPTION PAGE 1

SmartAir Master. The intelligent compressed air management system Developed by Compair to save your customers money

F02 SERIES ELECTRIC ACTUATORS

CS200 DIGITAL MFC SOFTWARE 2.0

HT-SG-100. Electronic Gas Engine Speed Governor. Smart Governing. Benefits

Valve and Case Expansion Monitor Specifications

LED indicators for normal/fault operating conditions, setup mode, loss of analog signal, and solid-state motor control output.

Controller module. Brief description. Features. Block structure. Data Sheet Page 1/7

Technical Specifications

Quick Installation Guide

Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers

/8 DIN Motorized Valve Controller

MOTION CONTROL SOLUTIONS

2300 Digital Electronic Load Sharing and Speed Control. Product Manual (Revision C) Original Instructions

- SELF-TUNING PID ALGORITHM - INTUITIVE COLOR DISPLAY WITH TEXT MESSAGING - UNIVERSAL PROCESS AND TC/RTD INPUTS - MULTI- FUNCTION RAMP- DWELL/PROCESS

MRT1 Test Unit. Manual MRT1 (Revision A)

HARDWARE OF SUPERVISORY CONTROL & DATA ACQUISITION SYSTEM

ARx Series. Air Cooled Active Resistance DC Electronic Load. The Evolution of Electronic Loads. Feature Highlights.

Accessories. Embedded Control. Order number: Flash-RAM memory module, 128 K x 16 (for 680I) Accessories

The SF-586b Insertion Flow Meter For Compressed Air, Gases And Exhaust Air (up to 400 C) In Pipe Diameters From 25mm to 5000mm

WIRELESS REMOTE ASSET MONITORING & CONTROL

Deaerator and Surge Tank Control

Product Overview. by Bihl+Wiedemann

Tachometer Panel, PE3

Modulating controlled actuator AME 11

Installation and Operation Manual 723 POSITION CONTROL. Part No ,

Transcription:

Application Note 51235 (Revision NEW, 9/2004) Original Instructions Simple Generator Drive Steam Turbine Applications Woodward reserves the right to update any portion of this publication at any time. Information provided by Woodward is believed to be correct and reliable. However, no responsibility is assumed by Woodward unless otherwise expressly undertaken. Copyright Woodward 2004 All Rights Reserved

Simple Generator Drive Steam Turbine Applications Application Note 51235 Simple Generator Drive Steam Turbine Applications Introduction Many small to medium sized steam turbine driven generator sets provide process steam pressure control while profitably generating electrical power. The Woodward 2301D-ST is a microprocessor based control with integral application software designed for single-valve steam turbine applications. To facilitate unit retrofits, the 2301D-ST s I/O terminals are located in the same general location as Woodward s 2301A line of controls. This control is designed to perform the core control functions of a small steam turbine package. The application software is field configurable, allowing it to be configured and modified to meet sitespecific requirements. With more I/O than a 2301A LSSC, the 2301D-ST control also has serial communications, allowing it to easily interface with the package PLC or plant DCS. The 2301D-ST is configured and serviced (dynamic adjustments made) via a laptop computer connected to the control s RS-232 communications port. These configuration and dynamic settings are set, changed, tuned, and saved via a laptop computer and Woodward s user-friendly Watch Window software program. This Windows based PC program allows users to set and adjust all application-based parameters, plus upload and download configurations to and from the control. Benefits Field configurable for single-valve steam turbine generator set applications Easy to retrofit existing Woodward 2301A or 2301A LSSC controls Expanded speed control functions like: multiple starting modes, starting valve ramps, critical speed avoidance, droop-isoch control, KW-actuator droop Shutdown and alarm logic On-board diagnostics Process control and remote speed/load setpoint Generator power sensing, load sharing (with soft loading/unloading transfer), and synchronizing inputs ServLink (DDE)/Modbus Communications via RS-232 with the capability to switch between protocols Hazardous location version available (shown below) Marine listed version available Interfaces with many types of actuators 2 Woodward

Application Note 51235 Simple Generator Drive Steam Turbine Applications 24 Vdc Relay Outputs Alarm, Shutdown, Overspeed 4-20 Analog Output Contact Inputs Analog Inputs Computer/Peripheral Interface Gen Load Raise, Lower, Start, SD, Reset, 52G, Idle/Rated, Process Control Enable Remote Speed Setpoint Modbus & ServLink SPM-A Input PTs & CTs Synchronizer Utility Bus T&T Valve Inlet Pressure Generator Turbine Speed Exhaust Pressure Load Woodward 3

Simple Generator Drive Steam Turbine Applications Application Note 51235 The 2301D-ST is a microprocessor-based control with integral application software designed for single-valve steam turbines driving either mechanical or generator loads. Like Woodward's 2301A line of controls, this control is housed in a sheet-metal chassis and consists of a single printed circuit board. To facilitate unit retrofits, the 2301D-ST's I/O terminals are located in the same general location as Woodward's 2301A line of controls. This control is designed to perform the core control functions of a small steam turbine package with integral process control. The application software is field configurable, allowing it to be configured and modified to meet site-specific requirements. (product spec 03297) The TG-13E and TG-17E actuators are drop-in replacements for TG mechanical governors, and are self-contained electro-hydraulic actuators for use on steam turbines where isochronous control, load sharing, or other functions are required. They can be used with all available Woodward electronic governor controls and accessories. (product spec 04044) The PGPL Actuator/Driver is a drop-in replacement for PG-PL mechanical governors, and is an electro-hydraulic actuator with a proportional driver interface which can be used with electronic controls providing a 0 to 200 ma position signal. The actuator is designed for use with Woodward controls. (product spec 37520) The electrically controlled Hydraulic Amplifier is a pilot operated, linear servo actuator with up to 3 inches (76 mm) of stroke and up to 4500 lb (20 kn) of force. The amplifier is capable of operating the control mechanisms for steam turbines or large engines which require relatively large forces and work capacity. (product spec 89007) The DSLC control is a microprocessor-based synchronizer and load control designed for use on three-phase ac generators equipped with Woodward or other compatible speed controls and compatible automatic voltage regulators. The DSLC control is a synchronizer, a load sensor, a load control, a dead bus closing system, and optionally a VAR/PF and process control, all integrated into one powerful, yet convenient package. (product spec 02006) The MSLC control is a microprocessor-based load control designed for three-phase electric power generation sites equipped with Woodward DSLC Digital Synchronizer and Load Control units which operate in parallel with the utility. The MSLC is a synchronizer, a utility load sensor, an import/export load level control, a power factor control, and a master process control. (product spec 02021) 4 Woodward

We appreciate your comments about the content of our publications. Send comments to: icinfo@woodward.com Please reference publication 51235. PO Box 1519, Fort Collins CO 80522-1519, USA 1000 East Drake Road, Fort Collins CO 80525, USA Phone +1 (970) 482-5811 Fax +1 (970) 498-3058 Email and Website www.woodward.com Woodward has company-owned plants, subsidiaries, and branches, as well as authorized distributors and other authorized service and sales facilities throughout the world. Complete address / phone / fax / email information for all locations is available on our website.