The 400, 800, and 2300 Series, from

400, 800, 2300, 2300D Surface Nonmetallic Raceway Systems For Low Voltage and Power pplications 400, 800, 2300, 2300D Series Raceway Systems The 400, 800, and 2300 Series, from The Wiremold Company, is a family of single compartment raceways for communication or power applications ideal for use in classrooms, office, and hotel applications or anywhere a small low profile raceway is needed. The 2300D Nonmetallic Divided Raceway is for use when power and low voltage cabling is required in the same raceway. 400, 800, 2300, and 2300D Features & Benefits Single and dual compartment low profile raceway design. Provides functionality and flexibility with aesthetics for single or dual service applications. Over-the-raceway box for 2300 and 2300D. Boxes mount over continuous run of raceway base eliminating the need to cut raceway when locating devices. Quick Fit integral faceplate. Provides flush look and ease of installation. Eliminates the need for additional commercial faceplates. Durable, textured PVC ivory or white finish. Blends with walls and ceilings. Consult factory for special colors. Datacom connectivity options. ccepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point of use. ccommodates communication and/or power wiring. Can be used for communications, computer lines, surveillance systems, fire alarms, outlets, and more. Lightweight and easy to handle. Saves time and labor costs. Standard 5' [1.525m] lengths can be easily installed by one person. Special lengths up to 10' [3.050m] are available. FiberReady divided fittings. For use with 2300 and 2300D. Full capacity, aesthetically pleasing fittings provide 2" [51mm] bend radius. Snap-on cover. Provides security with access to wiring for changes or additions. Easy to cut. Use a hacksaw or shears to cut raceway which speeds installation. Choice of raceway sizes with full line of fittings and accessories. Facilitates easy installation of wiring for whatever the job requires: communication devices, receptacles, switches, temperature controls, etc. Ratings: UL 600V (UL5), CS 300V (CS 22.2 No. 62-93). a j ED296R13 Updated March 2005 For latest specs visit www.wiremold.com

400BC*/800 BC*/ 2300BC*/2300BCD* Raceway Profiles Base & Cover Base and cover manufactured of rigid PVC compounds. Cover matte texture. Packed ten 5' [1.5m] lengths per carton. 400BC* 800BC* 2300BC* 2300BCD* 7/16" [11.1mm] 7/16" [11.1mm] 11/16" [17.5mm] 11/16" [17.5mm] 7/8" [22.2mm] 1 5/16" [33mm] 2 1/4" [57mm] 2 1/4" [57mm] 400, 800, 2300 Surface Nonmetallic Raceway Fittings 400WC* 800WC* 2300WC* Wire Clip For holding conductors in place. Cat No. 400WC 3/4" [19.1mm] 800WC 1" [25mm] 2300WC 1" [25mm] 406/806/2306* Cover Clip For covering joint of two pieces of 400, 800, or 2300 Cover. Cat No. 406 13/16" [20.8mm] 806 1" [25mm] 2306 2" [51mm] 417* 1 1/2" Internal Elbow For surfaces at [38mm] right angles. 418/818/2318*/** 90 External Elbow For right angle turns around external corners. Cat No. 418 1 1/2" [38mm] 818 2" [51mm] 2318 2 1/2" [64mm] 410B/810B/2310B* B Blank End Fitting For closing end of 400, 800, or 2300 Raceway. Cat No. B 410B 13/16" [20.6mm] 1/2" [12.7mm] 810B 1 1/4" [32mm] 1/2" [12.7mm] 2310B 2 1/4" [57mm] 1" [25mm] 811/2311*/** 90 Flat Elbow For right angle turns on same surface. Cat No. 811 2 1/2" [64mm] 2311 4 3/16" [107mm] 411* 90 Flat Elbow For right angle turns on same surface. 2 1/16" [53mm] 1 3/8" [35mm] 815/2315*/** Tee For branches at right angles. B Cat No. B 815 4 1/8" [105mm] 2 3/4" [70mm] 2315 6" [152mm] 4 1/8" [105mm] 415* Tee For branches at right angles. 3 3/16" [81mm] 2" [51mm] 1 3/8" [35mm] 2 5/32" [55mm] 817/2317* Internal Elbow For surfaces at right angles. Cat No. 817 2" [51mm] 2317 2 1/2" [64mm] * dd WH suffix for White finish. ** For 2300BCD and 2300BCD Raceway must be mitered to use 2311 and 2318. 2315 cannot be used in divided raceway. 2

400, 800, 2300 Surface Nonmetallic Raceway Fittings 8102* Entrance End Fitting For feeding 400 or 800 Raceway with 1/2" trade size conduit or armored cable. 1 1/2" [38mm] 2310DFO* Divided Entrance End FiberReady divided fitting to feed 2300 and 2300D Series 2 3/16" [56mm] 4" [102mm] 6 1/2" [165mm] Raceway. Includes 3/4" trade size KOs on back and top. 4 1/4" [108mm] 1 7/16" [37mm] 889* End Reducing Connector 1 1/2" For transition from 800 to [38mm] 400 Raceway. 2" [51mm] 2311DFO* 5 1/2" [140mm] 5 1/2" [140mm] FiberReady 2" [51mm] Radius Full Capacity Flat Elbow 90 flat corner with integral dividers to provide 2" [51mm] cable bend radius for Fiber Optic and Cat. 5/ Cat. 6 installations. 5474* Transition Tap Fitting Makes transition from 5400 Raceway to the 400/800/2300 Series Raceway. 7 9/16" [192mm] 3 3/16" [81mm] 2317DFO* 5 1/2" [140mm] 5 1/2" [140mm] FiberReady 2" [51mm] Radius Full Capacity Internal Elbow 90 internal corner with integral dividers to provide 2" [51mm] cable bend radius for Fiber Optic and Cat. 5/ Cat. 6 installations. 2310* Entrance End Fitting 1/2", 3/4", and 1" trade size KOs for feeding 2300 Raceway. 2 7/16" [62mm] 4 1/2" [115mm] 2389* End Reducing Connector 3" For transition from 2300 to [76mm] 800 Raceway. 2 1/2" [64mm] 2389* End Reducing Connector 3" [76mm] For transition from 2300 to 400 Raceway. 2 1/2" [64mm] 1 15/16" [49mm] *dd WH suffix for White finish. 2318DFO* 5 1/4" [133mm] CM-MMB-232* 5.19" [132mm] CM-MMB-233* 5.19" [132mm] 5 1/4" [133mm] 1 1/2" [38mm] 5.19" [132mm] 1 1/2" [38mm] 7 3/4" [197mm] FiberReady 2" [51mm] Radius Full Capacity External Elbow 90 external corner with integral dividers to provide 2" [51mm] cable bend radius for Fiber Optic and Cat. 5/ Cat. 6 installations. Multimedia Boxes and Surface Mount Blocks - Two 2 Insert Multimedia Box with fiber storage loop (compatible with 400, 800, and 2300 Series Raceway). ccepts Pass & Seymour ctivate Inserts ccepts Wiremold Open System Communications Modules Multimedia Boxes and Surface Mount Blocks Three 2 Insert Multimedia Box with fiber storage loop (compatible with 400, 800, and 2300 Series Raceway). ccepts Pass & Seymour ctivate Inserts ccepts Wiremold Open System Communications Modules 3

Sure-Snap Device Boxes Interchangeable covers and bases. Provides installation flexibility. Large knockout. ccommodates many cable types and quantities. Cover removes easily. One twist of a screwdriver removes the cover for fast changes. No screws to assemble. The secure snap assembly requires fewer tools and parts, which means a shorter installation time. Sure-Snap Device Boxes are available in a variety of sizes and depths. Sure-Snap 400/800/2300 Device Boxes (For Non-Divided Raceways) 2348S/51* B C Shallow Device Box For mounting shallow modular wall jacks, switches, and receptacles. ccepts NEM Faceplates Cat # Gang(s) B C 2348S/51 1 4 3/4" 3" 7/8" [121mm] [76mm] [22mm] 2347* Device Box For standard 2347-2* switches, receptacles, and B wall jacks, connecting blocks, coaxial, and other cable networking connectors. Twogang base has rectangular C KO to enable extension from existing single-gang flush wall box and 1/2" and 1" trade size concentric KOs. ccepts NEM Faceplates Cat # Gang(s) B C 2347 1 4 3/4" 3" 1 3/8" [121mm] [76mm] [35mm] 2347-2 2 4 3/4" 4 7/8" 1 3/8" [121mm] [124mm] [35mm] Cat # Gang(s) B C 2348 1 4 3/4" 3" 1 3/4" [121mm] [76mm] [35mm] 2348-2 2 4 3/4" 4 7/8" 1 3/4" [121mm] [124mm] [44mm] 2348-3 3 4 3/4" 6 1/2" 1 3/4" [121mm] [165mm] [44mm] 2348* Deep Device Box For 2348-2* B deeper switches, receptacles, 2348-3* and voice/data interface devices. Two- and threegang base has rectangular KO to enable extension from C existing single-gang flush wall box and 1/2" and 1" trade size concentric KOs. ccepts NEM Faceplates 2344* Extra Deep Device Box 2344-2* Extra depth permits installation of cable assemblies that require greater bends or storage. B Two-gang base has rectangular KO to enable extension from existing single-gang flush wall box C and 1/2" and 1" trade size concentric KOs. ccepts NEM Faceplates Cat # Gang(s) B C 2344 1 4 3/4" 3" 2 3/4" [121mm] [76mm] [70mm] 2344-2 2 4.3/4" 4 7/8" 2 3/4" [121mm] [124mm] [70mm] 2348 MP* Magnetic-Backed Deep 2348-2 MP* Device Box (with Grommet) Recommended B for surface mounting of the ctivate Connectivity inserts and other devices. Dimensions same as 2348 Series. C ccepts NEM Faceplates Cat # Gang(s) B C 2348 MP 1 4 3/4" 3" 1 3/8" [121mm] [76mm] [35mm] 2348-2 MP 2 4.3/4" 4 7/8" 1 3/8" [121mm] [124mm] [35mm] NOTE: ll single-gang bases have a rectangular knockout on the base. * dd WH suffix for White finish. 4

The 2300 and 2300D Divided Raceway Box family provides two unique benefits; labor savings with over-the-raceway installation and Quick Fit integral faceplate technology. The 2348D and 2344D-2 over-the-raceway design eliminates cutting the raceway base to mount boxes. The base snaps on anywhere along the raceway. The Quick Fit integral faceplate of the 2344SD-2 Box Cover combines superior aesthetics with installation time savings. Pass & Seymour ctivate inserts, Wiremold Open System Communication Modules, and Ortronics Series II Devices snap directly into the Quick Fit faceplate, eliminating additional faceplates, and the box accepts 5507 Series device plates. The single-gang boxes accept Pass & Seymour ctivate, Ortronics, and other commercially available NEM standard faceplates. Sure-Snap Boxes for 2300BCD Divided Raceway 2348D* Device Box For mounting 1 3/4" standard switches, [44mm] receptacles, faceplates 4 3/4" and devices. [121mm] ccepts NEM Faceplates 3" [76mm] 2344D* Extra Deep Device Box 2 3/4" Use when additional depth [70mm] is required.for mounting 4 3/4" standard switches, [121mm] receptacles, faceplates, and devices. 3" ccepts NEM Faceplates [76mm] 2344SD-2* 2 1/4" [57mm] 4 3/4" [121mm] 4 7/8" [124mm] Note: Not for use with NEM Faceplates. Two-Gang Deep Divided Box For use with 2300 and 2300D Raceway. Provides power and data at a single point of use. For use with: 5507 Series Faceplates Ortronics TracJack & Series II Modules Pass & Seymour ctivate Series Inserts Wiremold Open System Communication Modules 2344SD-2 Over-the-Raceway Box pplication CM-EPL* End Plates Includes two outlet identification labels with clear covers and two matching screw covers. Required for mounting Pass & Seymour ctivate and Wiremold Open System communication modules into the 2344SD-2. 2344SD-2 S2-EPL* End Plates Includes two outlet identification labels with clear covers and two matching screw covers. Required for mounting Ortronics Series II modules into the 2344SD-2. 5507 Series Faceplate Communication Inserts 400/800/2300 Round Fixture Boxes for Non-Divided Raceway Item Description Cat. No. Diameter Depth Specifications * dd WH suffix for White finish. Blank Cover 2336 4 1/2" [114mm] Use with any round fixture box to convert into junction box. Extension Box 2337 5 1/2" [140mm] 1" [25mm] Same as the 2338 except has an open base to allow back feed from an existing in-wall box. Fixture Box 2338 5 1/2" [140mm] 1" [25mm] For hanging smoke/fire alarms and other security devices with 3 1/2" [89mm] or 4 1/16" [103mm] mounting centers. Not for use with ceiling fans. 5

5507 Series Faceplates 5507D* Modular Furniture dapter For mounting ctivate modular furniture bezel and other modular furniture adapters. 5507RJ* Dual RJ11/RJ45 Connector Faceplate For mounting one or two RJ type connectors has one opening and a KO for the other. 5507B* Blank Faceplate For covering unused compartments in the device bracket. 5507D* Duplex Faceplate For covering duplex style devices. ccepts 106 Frame. 5507R* Rectangular Faceplate For covering rectangular style devices. 5507S* Rectangular Spacer For mounting commercial device plates. Installs between the device bracket and a device. 5507FRJ* Flush Dual RJ11/RJ45 Faceplate Same as 5507RJ except the connectors are recessed to provide a flush installation. 5507-2S2* Ortronics Faceplate For mounting Ortronics 1 7/8" [48mm] 4 1/4" [108mm] datacom inserts. ccepts two Series II Devices. 5507-4TJ* Ortronics Faceplate For mounting Ortronics datacom inserts. ccepts four TracJack Devices. 5507SW* Switch Faceplate For covering standard toggle switches. 5507T1* Single Receptacle Faceplate For covering single receptacles 1.59" [40.4mm] diameter. 5507-6TJ* Ortronics Faceplate For mounting Ortronics datacom inserts. ccepts six TracJack Devices. 5507T2* Single Receptacle Faceplate For covering single receptacles 1.41" [35.8mm] diameter. NOTE: ll faceplates have a standard measurement of 4 1/4" x 1 7/8" [108mm x 34mm]. * dd WH Suffix for White finish. 6

400, 800, 2300, 2300D System pplication 2338, 2337 417, 817, 2317 2344, 2347, 2348 418, 818, 2318, 2318DFO 8102, 2310, 2310DFO 406, 806, 2306 415, 815, 2315 417, 817, 2317, 2317DFO 411, 811, 2311, 2311DFO NOTE: Illustration shows product applications only. 400/800/2300/2300D Raceway Cable Fill Capacities for Communications 2300D CBLE/WIRE SIZE O.D. 400 800 2300 each compartment inches [mm] 20%* 40%** 20%* 40%** 20%* 40%** 20%* 40%** UNSHIELDED 4-Pair, 24 WG Cat. 3 0.190 [4.8] 0 1 1 3 5 11 2 5 TWISTED PIR 4-Pair, 24 WG Cat. 5e 0.220 [5.3] 0 1 1 3 4 9 2 4 4-Pair, 24 WG Cat. 6 0.250 [6.3] 0 1 1 2 3 6 1 3 TELEPHONE 2-Pair, 24 WG 0.140 [3.6] 1 3 3 7 11 22 5 11 3-Pair, 24 WG 0.150 [3.8] 1 2 3 6 9 19 4 9 4-Pair, 24 WG 0.190 [4.8] 0 1 1 3 5 11 2 5 25-Pair, 24 WG 0.410 [10.4] 0 0 0 0 1 2 0 1 COXIL RG58/U 0.195 [5.0] 0 1 1 3 5 11 2 5 RG59/U 0.242 [6.1] 0 1 1 2 3 7 1 3 RG62/U 0.242 [6.1] 0 1 1 2 3 7 1 3 RG6/U 0.270 [6.9] 0 0 0 1 2 5 1 2 TWINXIL 100 Ohm 0.330 [8.4] 0 0 0 1 1 3 0 1 SHIELDED TYPE 1 0.390 [9.9] 0 0 0 0 1 2 0 1 TWISTED PIR TYPE 2 0.465 [11.8] 0 0 0 0 1 2 0 1 TYPE 3 0.245 [6.2] 0 1 1 2 3 7 1 3 FIBER Mini Zip Cord 0.079 x 0.157 [2 x 4] 2 4 4 8 13 27 6 13 Zip Cord 0.118 x 0.157 [3 x 6] 0 1 1 3 6 12 3 6 Round 4 Strand Fiber 0.187 [4.8] 0 1 1 3 6 12 3 6 Round 6 Strand Fiber 0.256 [6.5] 0 1 1 2 3 6 1 3 * 20% cable fill is calculated to approximate reduction in cable capacity due to connectors mounted within raceway and fittings that may restrict cross sectional area. **40% cable fill is the maximum designed cable fill based on a proposed revision to TI/EI 569-. 400/800/2300/2300D Raceway Wire Capacities for Power WIRE SIZE THHN 40% FILL 10 WG 12 WG 14 WG 400 3 5 800 4 5 6 2300 12 18 25 2300D* 5 8 12 * each compartment. 7

Datacom Connectivity Options Now you have a wide range of options for providing datacom connectivity into Wiremold Cable Management Systems. They are: Ortronics TracJack and Series II Modular Connectivity Solutions Pass & Seymour ctivate Modular Inserts Open System Communication Modules Use these icons to determine connectivity options for each Wiremold System component: Ortronics Connectivity TracJack Individual Jack System Front-loading, snap-in design supports future moves adds and changes Inserts for voice, data, audio, and video vailable Category 3, 5e, 6, USOC 6-position, and other media Flat or angled 45 exit configurations Choice of 13 colors and color matched to Wiremold Systems Universal T568/B wiring format Series II Front-Loading, Module System Module design features easy snap-in front-loading design Linear 110 punch down format for easy termination Inserts for voice, data, audio, and video vailable Category 3, 5e, 6, USOC 6-position, and other media vailable in flat or angled 45 exit configurations Color matched to Wiremold Systems For detailed product selection refer to the Ortronics Catalog or visit www.ortronics.com. Pass & Seymour Legrand Network Wiring ctivate Series Front-Loading Inserts Modular inserts for voice, data, audio and video applications Front-load, snap-in design Color and texture matched to Wiremold Systems vailable Category 3, 5e, 6, as well as 6-position USOC Universal T568/B wiring format For detailed product selection refer to the Pass & Seymour Network Wiring Catalog or visit www.passandseymour.com. Open Connectivity Solutions Wiremold Open System Communications Modules ccommodate a wide range of manufacturers communications outlets including keystone jacks, as well as proprietary solutions from vaya (Lucent) and NORDX Modules insert into a wide range of Wiremold Systems Pre-punched faceplates accept common communication devices NOTE: For more information on integrating connectivity into Wiremold Cable Management Systems contact the Wiremold pplications Engineering Team or your local Wiremold Sales Representative. Wiremold / Legrand U.S. and International: 60 Woodlawn Street West Hartford, CT 06110 1-800-621-0049 FX 860-232-2062 Outside U.S. 860-233-6251 Canada: 570 pplewood Crescent Vaughan, Ontario L4K 4B4 1-800-723-5175 FX 905-738-9721 Copyright 2005 The Wiremold Company ll Rights Reserved ED296R13 Updated March 2005 For latest specs visit www.wiremold.com