SUPER 7" 4+1 REAR VIEW CAMERA AND MULTIMEDIA KIT

Automotive components since 1963 SUPER 7" 4+1 REAR VIEW CAMERA AND MULTIMEDIA KIT GB USER MANUAL 1

2

CONTENT: Features... 4 Installation of monitor... 4 Signal cable description... 4 Control cable description... 5 Front panel control... 6 OSD menu - Screen menu... 7 Display... 8 Mirror function... 9 Camera... 9 Factory default settings... 11 Cam out... 11 Exit OSD... 12 Installation of camera... 13 Setting of distance gauges... 14 Monitor specifications... 15 Camera specifications... 17 Accessories... 18 PACKAGE CONTENTS: 1. 7" LED monitor 16:9. 2. Sun-hood. 3. Mounting brackets. 4. Mounting parts. 5. Control cable. 6. Camera w/ infrared LED s and built-in microphone. 7. 20 mtr. camera cable. 8. User manual. CAUTION: Do not add any parts or use any accessories which are not provided from the manufacturer. Do not adjust settings while driving, due to risk of accidents. Do not apply pressure to the screen. Do not use any liquid to clean the monitor. If you need to clean it, please use a LCD cleaning cloth. 3

FEATURES: Advanced OSD Menu for easy use Supports up to 4 CCD Camera inputs (6 pin Mini DIN). Extra RCA input for multimedia (VCD, DVD, Game device). Provide 2 Video / 1 Audio signal output. Support Single / Dual / Triple / Quad Screen (Cam out) Signal Trigger for Rear / Left / Right / AV. OSD control for Individual Normal / Mirror Camera Image. Auto Day and Night control via photo diode sensor. Auto Detection for NTSC / PAL System. Supported 9.6V~32V Car power system working Professional Metal Case with Anti Shocking Design INSTALLATION OF MONITOR: 1. Check the package and make sure all parts are included. 2. Clip the sun-hood on to the monitor and make sure it is installed properly. 3. Install the monitor on to the bracket. 4. Adjust the monitor to an appropriate / comfortable viewing angle before tightening the screws. 5. Connect the control cable to the power socket which is located at the rear side of the monitor. 6. Monitor installation is now completed. Each control cable wire is attached with a sticker to indicate its signal function. SIGNAL CABLE DESCRIPTION: 1. Cam-R (Mini DIN). For rear vision camera connection. (Selection of CAM-R overrides selections of other cameras). 2. Cam-A. For 2nd camera connection. 3. Cam-B. For 3nd camera connection. 4. Cam-C. For 4rd camera connection. 5. Live Video Out (RCA - White wire). On screen video loop out (for recording, second monitor or other device. 6. Live Audio Out (RCA - Black wire). On screen video loop out (for recording, second monitor or other device. 7. AV VIDEO IN (RCA - Yellow wire). Connection for any Video signal DVD, VCD, Game, camera. 8. AV AUDIO IN (RCA - Red wire). Connection for any Audio signal DVD, VCD, game. 9. CAM OUT (RCA - Green wire). Video loop (for recording, second monitor or other device) Set up by OSD under CAMERA set up window. 4

Jump Source Po wer Jump S ourc e Power Me nu Menu GB CONTROLCABLE DESCRIPTION: Cable configuration Don t connect the red wire (power wire) of this product directly to the battery. Connect the red wire of this product to the ACC of the ignition key switch. Failure to do so may result in permanent damage of the product. WIRE COLOUR FUNCTION REMARKS ON SCREEN VIEW Red Acc power (DC 9.6-DC32V.) Black GND White Parking control Active GND AV Blue Reverse control Active Power Level. Connect to reverse light. CAM R Orange Camera 2 Active Power Level. Connect to direction light (R). CAM R CAM B Yellow Camera 1 Active Power Level. Connect to direction light (L). CAM A CAM R 1. Activation of the trigger cables for reverse, right or left overrides any selection of images and shows the triggered camera. 2. *When pull the hand break, user need to press SOURCE button again to display AV IN picture. 5

FRONT PANEL CONTROL: POWER: SOURCE: JUMP: MENU: Press the POWER button to activate the monitor or to keep the monitor under stand by mode. Press this button to select image sequence CAM A CAM B CAM C CAM R CAM A+B CAM C+R CAM A+R CAM R+B CAM A+C CAM C+B CAM R/AB CAM R+AB CAM A With activated hand break, press this button to select image sequence AV CAM A+B CAM C+R CAM A+R CAM R+B CAM A+C CAM C+B CAM R/AB CAM R+AB CAM A CAM B CAM C CAM R AV.. Press this button to display defined camera input, user can select QUAD SEQ CAM A+B CAM C+R CAM A+R CAM R+B CAM A+C CAM C+B CAM R/AB CAM R+AB CAM A CAM B CAM C CAM R via OSD as default value. This encoder switch provides the following function: 1. Activate OSD menu: Press the menuswitch to activate the OSD menu. After the OSD menu is activated, in case the user does not proceed for further set up, the OSD menu will then automatically turn off within 20 seconds. 2. Enter-function: Press the encode switch to act as "Enter" Functions under the OSD menu. 3. Volume level: Exit the OSD menu: user can turn this switch left or right to adjust the volume value. 6

OSD MENU: DISPLAY OSD DISPLAY CAMERA RECALL EXIT 1. Press the MENU button to enter the OSD Menu. 2. Turn the MENU button left or right to select the setting you wish to proceed. The colour of the content will turn yellow to identify your selection. 3. Press the MENU button again until the colour of the content turns from yellow to red to enter system settings. Turn the MENU button left or right to adjust your setting value. SCREEN Menu This menu set up contains different setting for the TFT LCD. Brightness Provide adjustment for shade and brightness level of TFT display. Setting value from 0 ~ 100. Default value is 50. Contrast Provide adjustment for the light and dark level of the TFT display. Setting value from 0 ~ 100. Default value is 50. 7

Saturation Provide adjustment for the light intensity level of TFT display. Setting value from 0 ~ 100. Default value is 50. Hue Provide adjustment for the lightness and colorfulness level of TFT display. Setting value from 0 ~ 100. Default value is 50. (Only in NTSC system is available.) Sharpness Provide adjustment for the edge contrast (acutance) level of TFT display. Setting value from 0 ~ 100. Default value is 50. Return Return to OSD menu selection screen. DISPLAY Menu This menu set up contains the on screen identification and the activation of the distance gauge. Auto Day&Night Select ON to activate the auto day & night function or OFF to deactivate it. Default value is OFF. Display Select ON to show the source of video input title on screen or OFF to keep it invisible. Default value is ON. Distance Gauge Set the distance gauge ON to show the distance gauge on screen while reserving or OFF to deactivate. Default value is ON. (This DISTANCE GAUGE is for user s reference only) 8

OSD Lock This function provides protection when an unauthorized person tries to access the OSD settings. JUMP and Source key press simultaneously for over 5 seconds to unlock. Default value is OFF. Users must turn on LCD in order to run unlock process. All function buttons are still working during OSD Menu lock up period. Return Return to OSD menu selection screen. CAMERA Menu This menu set up contains the on Camera and Jump setting. MIRROR: Select "ON" to activate the mirror function for different cameras or "OFF" for a normal image. Default values are following below setting. CAM A OFF CAM B OFF CAM C OFF CAM R ON 9

Menu GB Dir Image The screen image setting of this panel during left / right turn: TRIPLE: When you are making a right turn or left turn, the screen of panel will display triple images for left hand side, right hand side and rear view when you are making a right turn or left turn. DUAL: SINGLE: With proper wiring, the screen will display dual image for both rear and right hand side view when making a right turn. While left turning, the screen will show dual image for both rear and left hand side view. Screen shows only single picture on direction turn. The screen will show only left side view on left turn and only right side view on right turn. Default value is SINGLE. Rear Setup The screen image setting of this panel during reverse gear: R: Screen will display single image for Cam R only. R+A: Screen will display dual image for both Cam R and Cam A. R+B: Screen will display dual image for both Cam R and Cam B. R/AB Screen will display triple image from Cam R ` Cam A ` Cam B. CAM R CAM A CAM B R+AB Screen will display triple image from Cam R ` Cam A ` Cam B. CAM R C A M A CAM B Default value is R. 10

Jump By pressing this button, the driver will be able to obtain the image selected under this setting. QUAD Obtain image from all camera input in quad picture while pressing the JUMP button and press again to return the default screen. SEQ. Corresponding with SEQ. Timer Step setting to jump channel by time sequence. CAM A Obtain image from camera A while pressing the JUMP button and press again to return the default screen. CAM B Obtain image from camera B while pressing the JUMP button and press again to return the default screen. CAM C Obtain image from camera C while pressing the JUMP button and press again to return the default screen. CAM R Obtain image from camera R while pressing the JUMP button and press again to return the default screen. CAM A+B Obtain image from camera A+B in dual picture while pressing the JUMP button and press again to return the default screen. CAM C+R Obtain image from camera C+R in dual picture while pressing the JUMP button and press again to return the default screen. CAM A+R Obtain image from camera A+R in dual picture while pressing the JUMP button and press again to return the default screen. CAM R+B Obtain image from camera R+B in dual picture while pressing the JUMP button and press again to return the default screen. CAM A+C Obtain image from camera A+C in dual picture while pressing the JUMP button and press again to return the default screen. CAM C+B Obtain image from camera C+B in dual picture while pressing the JUMP button and press again to return the default screen. CAM R/AB Obtain image from camera R+A+B in triple picture while pressing the JUMP button and press again to return the default screen. CAM R+AB Obtain image from camera R+A+B in triple picture while pressing the JUMP button and press again to return the default screen. Default value is QUAD. Cam Out Composite video loop out to recorder, monitor or other device. QUAD Recording or viewing from the output device in quad mode CAM A Recording or viewing from the output device for CAM A image CAM B Recording or viewing from the output device for CAM B image CAM C Recording or viewing from the output device for CAM C image CAM R Recording or viewing from the output device for CAM R image Default value is QUAD. SEQ Time Step Select Cam A/B/C/R switching time setting value from 02~100 Default value is 02 RETURN Return to OSD menu selection screen. 11

Information This menu set up contains Recall & Exit function. Recall Recall factory default. Exit Exit OSD menu. Notice: Firmware version has shown on last column. 12

INSTALLATION FOR COLOUR CAMERA INSTALLATION With standard mounting bracket and fasteners included in the package, the camera can be mounted firmly at the required position of the vehicle. 1. Install the camera on the mounted camera bracket using proper fasteners (included in the package). Decide direction for the camera to view when installing the camera on the bracket. 2. Run the built-in camera cable connection (1.5 mtr) to monitor with camera extension cable (20 mtr. standard length included in the package) into the vehicle body (make a 13 mm. (½") hole on the vehicle body if necessary). Connect the cable connectors firmly inside the vehicle with aid of a Loop-tie, and use weather sealer strip to help protect the cable connection. Seal the hole properly with weather sealant where the cable runs through vehicle body 3. For maximum weather protection, the cable connection is always recommended NOT to be left outside the vehicle. 4. This device has the function of night viewing. In the dark, the IR will be enabled and the image is more clearly. CAUTION 1. Adjust the camera angle so that the rear bumper or the rear end of the vehicle is visible on the monitor (at the bottom brim of the view). 2. To prevent vibration, be sure to install the camera in a position at which it can be installed securely. Take the necessary measures for reinforcement if there is no place the camera can be installed securely. 3. Note that there will be blind spots if the camera is installed on the rear bumper, step, or in other low position. Avoid installing the camera in places where the lens can be easily get dirty from mud, exhaust gases, ect. 4. Be sure to waterproof the holes used to install the camera mounting bracket on the car, the bolts, and the cable holes. CONNECTION OF CAMERA 5 Connection of camera 5 is done using the adapter Cargo 160603. Yellow RCA jack to VIDEO IN. White RCA jack to AUDIO IN. Furthermore 12 V / GND is connected to the camera via the red and black leads of the adapter. 13

VEHICLE INSTALLATION: 1. Install camera R (for rear view). 2. Use a measuring tool to mark out the distance behind the vehicle. 3. Adjust the viewing angle of the camera so that the distance gauge shown from the TFT match to the distance behind the vehicle. Switch to Rear view with source button, the screen always display on 16:9 While rear viewing, the screen always display on 4:3 to correct size percentage SOURCE button: Rear viewing: 16 9 4 3 14

MONITOR SPECIFICATIONS: Screen size 7" (Diagonal) 16:9. Active area 154.08 x 86.58 mm. Pixel configuration 0.107 x 0.370. Resolution 1440 x 234. Viewing angle 60. Power source DC 9.6 V. ~ DC 32 V. Contrast ratio 300:1. Brightness 450 cd/cm². Input Interface Composite connector RCA. Input signal 1 Vpp. Impedance 75 W. Camera Connector 6 pin mini din. Input video signal level 1 Vpp. Impedance 75 W. Input audio signal level 1 Vpp. Power output DC 12 V. 350 mamp. AV Audio In Connector Input signal level Impedance RCA. 1Vpp. 1 KW. Output Interface Composite Life video out. Connector RCA. Input signal level 1Vpp. Composite Video Cam out. Connector RCA. Input signal level 1Vpp. Impedance 75 W. Audio Live Out Connector Input signal level Impedance RCA. 1Vpp. 1 KW. Audio Weight Nt. 2 kg. Br. 2.28 kg. Dimension L: 192 mm. H: 140,5 mm. D: 51,8 mm. Environmental -10C ~70C. Storage temperatur -30C ~80C. Humidity 20%~80%. The brightness and contrast ratio specifications are from panel specification. Design and Specifications are subject to change without notice. 15

Camera Mirror (M) / Normal (N) adjustment For mirror function - Turn arrow to M. For normal function - Turn arrow to N. Camera Harness: Pin No. 1 2 3 4 5 6 7 Part description Audio Power Video GND NIL Mirror NIL Function of the Audio Cam A Cam B Cam C Cam R Cam A + Cam B Cam C+ Cam R Cam A+ Cam R Cam R+ Cam B Cam A + Cam C Cam C+ Cam B Cam R / Cam AB Quad AV Audio from Cam A Audio from Cam B Audio from Cam C Audio from Cam R Audio from Cam A Audio from Cam R Audio from Cam R Audio from Cam R Audio from Cam A Audio from Cam C Audio from Cam R Audio from Cam R Audio from AV Cam Out: Composite video loop out signal to recorder, monitor or other device. Live Video/Audio Out: On screen video/audio signal loop out to recorder, monitor or other device. 16

CAMERA SPECIFICATIONS Pick-up Device...1/3" interline transfer CCD Total Pixels...NTSC:537(H) x 505(V) PAL:537(H) x 597(V) Effective Pixels...NTSC:510(H) x 492(V) PAL:500(H) x 582(V) Resolution...W/ 420 TV lines Sync, System...Internal Scanning System...2:1 Interlace S/N Ratio...More than 45dB (AGC OFF) Electronic Shutter...Auto Electronic Shutter 1/60 (1/50) 1/100,000 sec. Min. Illumination...0 Lux (F2.0) w/ IR LED ON Video Output...Composite 1.0 Vp-p / 75 ohm Automatic Gain Control...ON Aperture Correction...Yes Frequency Horizontal...NTSC: 15.734 KHz ; PAL: 15.625 Khz Frequency Vertical...NTSC: 59.94Hz ; PAL: 50Hz IR Operation range...<9±3.2 Lux ON ; >9±3.75 Lux OFF LED Angle...4 PCS 70 / 2 PCS 50 total 6 PCS LED Lens Mount Type...2.27 mm. F2.2 View Angle...H:122 V:91 DC Power Source...DC9.6 12 V. Power Consumption...2.3 W (Max IR ON) Current...190 ma (Max IR ON) Audio Out...700 mv (10k OHM) Dimension...88.4(W) x 66.5(H) x 51.6(D) mm. Operation Temperature...-20 to 70 C (-4 to 158 F) Storage Temperature...-30 to 80 C (-22 to 176 F) 17

ACCESSORIES: 160610 Camera, O.D. 30 mm. L. 70 mm. Wide view angle, 130 diagonal. 160796 Camera w/ infrared LED s for night vision. Wide view angle, 112 horizontal, 91 vertical, 156 diagonal. 160790 Camera, O.D. 21 mm. L. 40 mm. Wide view angle, 170 diagonal. 170942 Magnet w/ metalbase for cameras. Extension cables. 160672 6 mtr. 160613 10 mtr. 160612 15 mtr. 160611 20 mtr. 160663 Trailer cable Kit. W/ 3.5 mtr. coiled cable. 160603 Connection cable from 6 PIN MINI DIN to RCA. Switch w/ location and function light. on/off. 180206 12 V. 180207 24 V. Symbolplates for Cargo 180206 and 180207. 181462 Green. 181463 Red. 181464 Camera. 18

19

Automotive components since 1963