Presents: G2-AS100 A mid-format fully integrated photogrammetric camera Designed and manufactured by Global Geo Supplies, Inc. Lone Tree, Colorado USA 1
TABLE OF CONTENTS CAMERA SPECIFICATIONS LENSES PERFORMANCE WITH 50mm LENS PERFORMANCE WITH 70mm LENS SYSTEM COMPONENTS AND SOFTWARE STACK GNSS + INS SPECIFICATIONS GYMBAL SPECIFICATIONS SENSOR INTEGRATION 2
SYSTEM COMPONENTS Phase One ixu-rs 1000 100MP RGB camera Resolution: 100 MP/ 11608 x 8708 Dynamic range: >84 db Aspect ratio: 4:3 Pixel size: 4.6 micron CCD size effective: 53.4 x 40 mm Lens factor: 1.0 Light sensitivity (ISO): 50-6400 Lens mount: Phase One RS dedicated Shutter speed: up to 1/2500 second Shutter life: Up to 500,000 cycles Shutter control: 1/3 f-stop increments Interfaces USB 3.0 Secured power input (LEMO) Camera trigger Mid-exposure pulse Live View/HDMI 1920 x 1080 25p/30p 1280 x 720 50p/60p GPS/IMU support Applanix, NovAtel, IGI, NMEA Devices Data storage 1 TB SSD storage (in ix Controller) CompactFlash card Type I/II including UDMA 6 and 7 Capture rate at full resolution: 0.85 sec RAW File compression IIQ large: 100 MB IIQ small: 65 MB Camera status 3
New He line of Rodenstock lenses With high reliability shutter Rodenstock 32 mm f/4.0 Rodenstock 40 mm f/4.0 Specially designed for aerial photography Shutter lifetime of 500,000 cycles Exposure time down to 1/2500 of a second Camera cycle of up to 0.6 Seconds frame to frame New Phase One RS secure lens mount Rodenstock 50 mm f/4.0 Rodenstock 70 mm f/5.6 4
GSD, SWATH AND AREA COVERAGE WITH 50mm LENS FOCAL LENGTH = 50mm AGL [ft] GSD [cm] Swath [m] Length [m] Area [km 2 ] 1,000 2.8 326 244 0.1 2,500 7.0 814 610 0.5 5,000 14.0 1628 1221 2.0 6,000 16.8 1953 1465 2.9 12,000 33.6 3906 2930 11.4 Length Swath 5
GSD, SWATH AND AREA COVERAGE WITH 70mm LENS FOCAL LENGTH = 70mm AGL [ft] GSD [cm] Swath [m] Length [m] Area [km 2 ] 1,000 2.0 233 174 0.08 2,500 5.0 581 436 0.3 5,000 10.0 1163 872 1.0 6,000 12.0 1395 1047 1.5 12,000 24.0 2790 2093 5.8 Length Swath 6
Enlargement SAMPLE IMAGES 7
Enlargement SAMPLE IMAGES 8
SYSTEM COMPONENTS AND SOFTWARE STACK Mission Planning and execution Phase One ixu-rs 1000 100MP Camera Gyro-Stabilized Gimbal Camera control Image georeferencing XU Camera controller GNSS + INS Georeferencing Unit Software packages for Deliverable products 9
SYSTEM COMPONENTS FEATURES 4th Generation Intel Core i7 Fanless cooling Rugged construction 8 GB of RAM Power and drive multiple cameras Pre-installed with ix Capture and Capture One DB Two removable solid state drives (SSD) with optional RAID system for data recording IX CAMERA CONTROLLER Unlimited storage with multiple SSD drives (max. capacity per SSD pair 28,500 images) 10
SYSTEM COMPONENTS GNSS + INS GEOREFERENCING UNIT Features Meter to centimeter level accuracy Regulated 10-30 VDC input 125 Hz navigation solution and raw measurement output Serial, USB, CAN and Multi I/O interface including dedicated wheel sensor input GPS, GLONASS, SBAS and RTK support Benefits SPAN enabled enclosure featuring NovAtel's tightly coupled OEM615 GNSS + INS engine Tactical grade IMU performance Commercially exportable IMU Small, lightweight and rugged Ideal for airborne, ground and marine applications 11
SYSTEM COMPONENTS CSM130 GIMBAL Angular Stabilization Ranges Arbitary Horizontal Axes: ±15.0 degree Pitch - at 0 degree Roll: ±15.0 degree Roll - at 0 degree Pitch: ±15.0 degree Yaw (Drift): ±25.0 degree Deviation from Perpendicular (Angular Rate of the base plate ±10.0 degree/second) with IMU support (accuracy depends on IMU) 0.2 degree rms Payload: 0.0...15 kg, 0.0...33.1 lb. Operational Voltage 28 VDC (24...30 VDC) Power Consumption at 28 VDC 30 W rms / Peak 90 W Operating Temperature -25 C...+60 C -13 F...+140 F Storage Temperature -50 C...+70 C -58 F...+158 F Useable Diameter: 130 mm, 5.1 in Mass: 5.2 kg, 11.5 lb. Dimensions CSM 130 (horizontal position) Length: 290 mm / 11.4 in Width: 275 mm / 10.8 in Height: 120 mm / 4.7 in 12
3 2 1 4 SENSOR INTEGRATION All cargo pod components are integrated into a single subsystem containing: 1) Gyro-stabilized gimbal 2) Camera 3) GNSS+IMU sensors 4) Mounting base with vibration dampers custom made for each installation (not shown here) 13
GNSS Antenna Pilot / Operator Terminals Camera controller 28V Aux AIRCRAFT ELECTRICAL INTEGRATION Sensor assembly (Installable in cabin or Cargo Pod) 14
Cessna Caravan 208B Cargo POD Installation 15
G2-AS100 Fitting in AVCON 20 ft 3 King Air POD 18 10 24 16
Contact information: Guillermo M. Gallo, VP Business Development Tel: +1 303 792 5157, Cel: 303 808 1919 guillermo.gallo@ggsnet.com Http://www.g2airborne.com G2 Airborne Systems is a trademark of Global Geo Supplies, Inc. 17