FPT Series Poke-Through: Power and Communications Four 20A Receptacles, two circuits, six 2 AWG wires, prewired, pigtail ends in junction box (can be wired as isolated, labels provided). Keystone Communications Device Plate with four Keystone Category 5e Data Jacks see page 83 for optional Communications Device Plates for. Integral threaded conduit hub for communication wiring (cast iron). 9 FPT-P-C-TBRS Brass Cover FPT-P-C-TALM Aluminum Cover FPT-P-C-TBLK Black Cover FPT-P-C Poke-Through Base (cover purchased separately) Threaded Hub for Communications /2 Threaded Hub for Power FPT Series Poke-Through: Covers Brushed-Metal Finishes Powder-Coat Finishes 7-/2 FPT-CVR-TBRS Brushed Brass FPT-CVR-TALM Brushed Aluminum FPT-CVR-TBLK Aluminum with Black Powder Coat Finish FPT-CVR-TGRY Aluminum with Grey Powder Coat Finish FPT-CVR-TBGE Aluminum with Beige Powder Coat Finish FPT-CVR-TBRN Aluminum with Brown Powder Coat Finish Brass Black Grey Forged solid brass and aluminum covers. Patented latching lid closes easily without the need for locking screws. Aluminum Beige Brown FPT Series Poke-Through: 2 Power and 6 Communications Four 20A Receptacles, two circuits, six 2 AWG wires, prewired, pigtail ends in junction box (can be wired as isolated, labels provided). Includes Keystone Communications Device Plate with six Keystone Category 5e Data Jacks see page 83 for optional Communications Device Plates for and. FPT-2P-6C FPT-CCH-6C Poke-Through Base Unit Only (cover purchased separately) Optional Threaded Conduit Hub for FPT-CCH-6C Threaded Hub /2 Threaded Hub for Power Two 3/ Thru-Holes for Communications 9 8
FPT Series Poke-Through: 8 Communications Keystone Communications Device Plates with eight Keystone Category 5e Data Jacks see page 83 for optional Communications Device Plates for and. No junction Box. (Left) (Center) (Right) Three 3/ Thru-Holes for Communications FPT-8C Poke-Through Base (cover purchased separately) FPT-CCH-8C Optional -/ Threaded Conduit Hub for FPT-CCH-8C 3-/ -/ Threaded Hub FPT Series Poke-Through: Locking Receptacle and 2 Communications 20A Receptacle: pre-wired, three 2 AWG wires, pigtail ends in 30A Receptacle: pre-wired, three 0 AWG wires, pigtail ends in Cover purchased separately. Includes Keystone Communications Device Plates with two Keystone Category 5e Data Jacks see page 83 for optional Communications Device Plates for. 9-3/ /2 Threaded Hub for Power FPT-TL2-2C Poke-Through Base, NEMA L5-20R, 20A/25V Locking FPT-TL22-2C Poke-Through Base, NEMA L6-20R, 20A/250V Locking 3/ Thru Hole for Communications FPT-TL3-2C Poke-Through Base, NEMA L5-30R, 30A/25V Locking FPT-TL32-2C Poke-Through Base, NEMA L6-30R, 30A/250V Locking FPT-CCH-2P Optional /2 Threaded Conduit Hub for FPT-CCH-2P /2 Threaded Hub 82
FPT Series Optional Communications Device Plates Plates Plates FPT-CPA-SYS FPT-CPB-2SYS FPT-CPA-3PAN** FPT-CPB-2PAN** FPT-CPA-KEY FPT-CPB-2KEY Cat. No. Description Std. Ctn. FPT-CPA-KEY For Keystone Jacks * FPT-CPA-SYS For Systemax Jacks FPT-CPA-3PAN For 3 PANDUIT Jacks ** FPT-CPA-MAAP For Extron MAAP Plate, Single Space FPT-CPA-0RT For Ortronics Jacks FPT-CPA-BLANK Blank FPT-CPB-2KEY For 2 Keystone Jacks * FPT-CPB-2SYS For 2 Systemax Jacks FPT-CPB-2PAN For 2 PANDUIT Jacks ** FPT-CPB-MAAP For Extron MAAP Plate, Single Space FPT-CPB-20RT For 2 Ortronics Jacks FPT-CPB-BLANK Blank FPT-CPB-2MAAP For Extron MAAP Plate, Double Space -B CSA not applicable. Device Plate Only no jacks included *Keystone plates also accept Leviton and Hubbell devices. **Requires CMNZABL-X adapter from PANDUIT to mount PANDUIT MiniCom jacks. ***For use with FTP-2P-6C and FPT-8C Series only; replaces one plate and one plate. FPT-CPA-MAAP FPT-CPA-ORT FPT-CPA-BLANK Compartment A-B Plate*** FPT-CPB-MAAP FPT-CPB-2ORT FPT-CPB-BLANK FPTA-CPAB-2MMAP FPT Series Replacement Power Insert 2 Receptacles For use with FPT-P-C and FPT-2P-6C Series Poke-Through Systems. FPT-2P-RPL Replacement Power Insert with 8 Wire Whip Two 20 A Receptacles 83
FPT3 Series Poke-Through: 2 Power and 2 Communications This aesthetic, easy-to-use Poke-Through provides an ideal power and data solution great for new construction for upgrading existing 3 core installations. Capacity: duplex receptacle and 2 data jacks (included). Core Drill Size 3. Durable solid brass or aluminum covers protect devices from damage and debris when not in use no exposed plastic components. Powder-coated aluminum covers are available in black, grey, brown and beige to match any décor the most colours in the industry. Brushed brass and aluminum finishes provide superior aesthetics. Slide latches enable tool-less access to individual receptacles eliminates the need for hard-to-use locking screws. Accepts Keystone, Leviton or Hubbell data jacks. Poke-Through Base Unit FPT3-2P-2C-BRS Brushed-Brass Cover FPT3-2P-2C-ALM Brushed-Aluminum Cover FPT3-2P-2C-BLK Black Powder-Coat Cover FPT3-2P-2C FPT3 Series Poke-Through Base Unit Only: Poke-Through Covers FPT3-CVR-BRS Solid Brass, Brushed Finish FPT3-CVR-ALM Solid Aluminum, Brushed Finish FPT3-CVR-BLK Aluminum with Black Powder-Coat Finish FPT3-CVR-GRY Aluminum with Grey Powder-Coat Finish FPT3-CVR-BGE Aluminum with Beige Powder-Coat Finish FPT3-CVR-BRN Aluminum with Brown Powder-Coat Finish See page 85 to view brushed metal and powder coat finishes. Junction box features (3) /2 and () 3/ knockouts (3 cubic inch capacity). Includes () 20A duplex receptacle, pre-wired, pigtail ends in Includes (2) Leviton CAT 5e data jacks. Slide latch to release or 2 flip lids 6-/ Two 7/6 Thru-Hole for Communications 7/6 Conduit for Power 7-/2 Slide latch to release or 2 lids 8
FPT Flush Series Poke-Through: 2 Power The Steel City FPT Poke-Through Series provides an economical solution for installing a duplex receptacle in an existing floor right where you need it. Capacity: duplex receptacle. Core Drill Size 3. Brushed brass and aluminum covers provide superior aesthetics and durability. Nonmetallic covers are available in black, grey, beige and brown. Nonmetallic covers include openings for 3 communications cables. Integral junction box features (5) /2 and (5) 3/ knockouts (27 cubic inch capacity). Assembled units include () 20A duplex receptacle, pre-wired with pigtail ends in junction.ox. FPT-9 With Solid-Brass Cover FPT-50 With Solid-Aluminum Cover FPT-5-SW-BLK With Black Nonmetallic Cover FPT-5-SW-GRY With Grey Nonmetallic Cover FPT-5-SW-BGE With Beige Nonmetallic Cover FPT-5-SW-BRN With Brown Nonmetallic Cover FPT-00B FPT Poke-Through Base Unit Only (no duplex) 5-3/ Opening for Communication (Equivalent to Two 3/ Conduits) Metallic Cover 7 Nonmetallic Cover Removable KOs for Communication Cables (Qty. = 3) Opening for Power (Equivalent to One /2 Conduit) 6 FPT Flush Series Poke-Through Covers Nonmetallic covers feature openings for 3 communication cables. Brushed-Metal Finishes Nonmetallic Colours and Finishes FPT-CACP Solid Brass, Brushed Finish, 5-3/ Diameter 0 FPT-CACP-AL Solid Aluminum, Brushed Finish, 5-3/ Diameter 0 FPT--SW-BLK* Black, Nonmetallic, 7 Diameter 0 FPT--SW-GRY* Grey, Nonmetallic, 7 Diameter 0 FPT--SW-BGE* Beige, Nonmetallic, 7 Diameter 0 FPT--SW-BRN* Brown, Nonmetallic, 7 Diameter 0 *Not CSA Certified. FPT-CACP Solid Brass FPT-CACP-AL Solid Aluminum FPT--SW-BLK Black FPT--SW-BGE Beige FPT--SW-GRY Grey FPT--SW-BRN Brown 85