ICOS - /, / or / poppet valves > > Port size: /... / (ISO G / NPT) Namur or manifold > > Control of pneumatic or hydraulic operated equipment > > Direct acting solenoid valve > > High flow > > bar inlet pressure > > Reliable and long life, ideal for a one time installation > > Certifications: ATEX, CSA, GOST K & R, IECEx, FM, CSA, CRN, CCOE, IN-METRO, KOSHA > > Environmental protection: NEMA X, IP/X8 Technical features Medium: Hydraulic and pneumatic customer to specify and confirm compatibility Operation: Direct solenoid operated poppet valves Mounting position: Solenoid vertical Flow: 0, Cv (8,7Kv).... Cv (. Kv) Port size: G /, / NPT, G /, G / NAMUR or manifold versions Operating pressure: 0... bar (0... 7 psi) Temperature: Media: -... +90 C (-7... 9 F) Ambient: See table on page Air supply must be dry enough to avoid ice formation at temperatures below + C (+ F). Materials: Valve body, trim, coil housing and top cover: stainless steel.0 ( L) O-rings seats & seals: NBR Other seal materials available on request notice, the specifications given in this document. (0-97c) IMI Precision Engineering, Thompson Valves Ltd. / en.7.0.0
ICOS - /, / or / poppet valves Technical data standard models with conduit connection M0 x, Symbol Port size Function Operating pressure (bar) Manual override/ reset ATEX certification Power consumption at Vdc (W) Ambient temperature (kg) No. / NPT / NC 0... Without Ex II GD, Exd IIC T (- + C), T (+90 C max),0 Y0AAHBS G / / NC 0... Without Ex II GD, Exd IIC T (- + C), T (+90 C max),0 Y0AEHBS Weight Dimension / NPT / NC 0... JSMO*) Ex II GD, Exd IIC T (- + C), T (+90 C max).0 Y0SAHBS G / / NC 0... JSMO*) Ex II GD, Exd IIC T (- + C), T (+90 C max).0 Y0SEHBS / NPT / UNI 0... Without Ex II GD, Exd IIC T (- + C), T (+90 C max),0 Y0AAHBS G / / UNI 0... Without Ex II GD, Exd IIC T (- + C), T (+90 C max),0 Y0AEHBS / NPT / UNI 0... Without Ex II GD, Exd IIC 7,8 T (- + C), T (+90 C max), Y0AAHBS G / / UNI 0... Without Ex II GD, Exd IIC 7,8 T (- + C), T (+90 C max), Y0AEHBS / NPT / UNI 0... JSMO* Ex II GD, Exd IIC T (- + C), T (+90 C max), Y0SAHBS G / / UNI 0... JSMO* Ex II GD, Exd IIC T (- + C), T (+90 C max), Y0SEHBS / NPT / UNI 0... TPMR*) Ex II GD, Exd IIC T (- + C), T (+90 C max), Y0TAHBS G / / UNI 0... TPMR*) Ex II GD, Exd IIC T (- + C), T (+90 C max), Y0TEHBS / NPT / UNI 0... PBMO*) Ex II GD, Exd IIC T (- + C), T (+90 C max),0 7 Y0PAHBS G / / UNI 0... PBMO*) Ex II GD, Exd IIC T (- + C), T (+90 C max),0 7 Y0PEHBS / NPT / UNI 0... PBMO*) Ex II GD, Exd IIC 7,8 T (- + C), T (+90 C max), 8 Y0CAHBS G / / UNI 0... PBMO*) Ex II GD, Exd IIC 7,8 T (- + C), T (+90 C max), 8 Y0CEHBS / NPT / UNI 0... PBMR*) Ex II GD, Exd IIC T (- + C), T (+90 C max),8 8 Y0PAHBS G / / UNI 0... PBMR*) Ex II GD, Exd IIC T (- + C), T (+90 C max),8 8 Y0PEHBS Manifold / UNI 0... Without Ex II GD, Exd IIC T (- + C), T (+90 C max),8 9 Y0AKFHBS Model / NPT NAMUR / UNI 0... PBMR*) Ex II GD, Exd IIC T (- + C), T (+90 C max). 0 Y0PNAHBS G / NAMUR / UNI 0... PBMR*) Ex II GD, Exd IIC T (- + C), T (+90 C max). 0 Y0PNEHBS / NPT / UNI 0... Without Ex II GD, Exd IIC 7,8 T (- + C), T (+90 C max),8 Y0AAHBS G / / UNI 0... Without Ex II GD, Exd IIC 7,8 T (- + C), T (+90 C max),8 Y0AEHBS NAMUR / UNI 0... Without Ex II GD, Exd IIC 7,8 T (- + C), T (+90 C max), Y0ANAHBS / NPT / UNI 0... PBMO*) Ex II GD, Exd IIC 7,8 T (- + C), T (+90 C max), Y0CAHBS G / / UNI 0... PBMO*) Ex II GD, Exd IIC T (- + C), T (+90 C max), Y0CEHBS / NPT / UNI 0... PBMR*) Ex II GD, Exd IIC T (- + C), T (+90 C max), Y0PAHBS G / / UNI 0... PBMR*) Ex II GD, Exd IIC 7,8 T (- + C), T (+90 C max), Y0PEHBS *) PBMR = Push button manual reset, PBMO = Push button manual override, JSMO = Jack screw manual override, TMRP = Tamperproof manual reset button en.7.0.0 notice, the specifications given in this document. (0-97c) IMI Precision Engineering, Thompson Valves Ltd. /
ICOS - /, / or / poppet valves Option selector Y S ATEX certification Ex d Ex mbe Ex ia* Operation O Z X / NC / NO / / Operation Automatic Push button manual override Push button manual reset Tamper proof manual reset Jackscrew manual override Port size A C P T S / NPT A G / E / NPT A G / NAMUR Manifold * For Zone 0 - see separate catalogue section. E NA KF Voltage / Signal V d.c. B V d.c. C 0 V d.c. D V d.c. E V a.c. G 0 V a.c. J 0 /0 V a.c. (0 V) M 0 V a.c. T Conduit / Signal connection 0mm x.mm ISO (F) / NPT (F) Seat /seal material Nitrile (-... +90 C) H FKM (-0... +90 C) V / notice, the specifications given in this document. (0-97c) IMI Precision Engineering, Thompson Valves Ltd. en.7.0.0
ICOS - /, / or / poppet valves Dimensions 7, 7 8 7,, 8 8 7 8 7, 7,, 7, 9 7 87 7,,, 8 8 Conduit connection M0 x, or / NPT External earth Jack screw manual override (JSMO) en.7.0.0 notice, the specifications given in this document. (0-97c) IMI Precision Engineering, Thompson Valves Ltd. /
ICOS - /, / or / poppet valves 7 7 8 8 8 7, 9 7,, 7 8 8 7 9 7 7 9 7 87 7, 8 8 Conduit connection M0 x, or / NPT External earth Push button manual reset (PBMR) Push button manual override (PBMO) Tamer proof manual reset (TPMR) / notice, the specifications given in this document. (0-97c) IMI Precision Engineering, Thompson Valves Ltd. en.7.0.0
ICOS - /, / or / poppet valves 9 8 ø8,8 ø 0 7 7, 9 8 8, 9 9,, Conduit connection M0 x, or / NPT External earth Push button manual reset (PBMR) en.7.0.0 notice, the specifications given in this document. (0-97c) IMI Precision Engineering, Thompson Valves Ltd. /
ICOS - /, / or / poppet valves 77 8 77 8 0 9 0 9 0 0 77 8 0 9 0 Conduit connection M0 x, or / NPT External earth Manual override PBMO Manual override PBMR / notice, the specifications given in this document. (0-97c) IMI Precision Engineering, Thompson Valves Ltd. en.7.0.07
ICOS - /, / or / poppet valves 77 8, 9 9,, Conduit connection M0 x, or / NPT External earth Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI Precision Engineering, Thompson Valves Ltd. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. For further information please see Functional Safety Manual MI00. en.7.0.08 notice, the specifications given in this document. (0-97c) IMI Precision Engineering, Thompson Valves Ltd. /