Optical 3D Measuring Machine Fully automated, industrial 3D scanning and inspection for manufacturing and production
Optical 3D Measuring Machine 3D Coordinate Measuring Optical, full-field metrology for 3D coordinate measurement is a standard quality control tool in the industry. GOM s ATOS is an industrial, high resolution, optical 3D coordinate measuring system. It delivers 3D measurement data quickly and accurately and impacts the overall industrial process chain from design through manufacturing to maintenance. Reducing research and development times Improving product quality and speeding up production times Higher level of quality assurance through entire product life cycle Uniform quality standards with reliable, traceable results Standardized, automated optical metrology Automated measurement systems are replacing manually operated systems and continue to grow as an important tool in industrial process chains. GOM s ATOS ScanBox is the ideal automation solution for industrial quality control. The ATOS ScanBox standardizes automated optical metrology and combines reliable and industrial hardware with process-safe software. Monitoring early trend analysis within production processes Establishing root cause analysis to detect engineering issues Higher productivity and increased efficiency in quality control Quality assurance with fewer personnel and increased performance
Short delivery times GOM s production setup allows delivery and installation of the ATOS ScanBox within a few weeks. Its setup does not require additional on-site planning. It features a complete declaration of conformity, documentation, training and world-wide local support, reducing implementation times and running costs. Complete solution, one single source GOM s ATOS ScanBox is a complete solution from one single source containing hardware, software, support, safety and documentation. The result is a completely solution using only proven, reliable industrial components which have been specially optimized to work perfectly with each other.
Optical 3D Measuring Machine The ATOS ScanBox is a plug-and-play measuring cell for fully automated 3D digitizing and inspection. The ATOS ScanBox combines optimized industrial components, mobility and highest safety in an off-the-shelf 3D measuring machine. Coordinate Measurement Machine The ATOS ScanBox is an optical 3D measuring machine with a comparable investment volume to traditional CMMs. However the ATOS ScanBox delivers full-field, surface measurement of small to large parts, easy to understand result visualizations, simple problem finding and complete reporting. The ATOS 3D Digitizer is the most innovative optical measuring system for three-dimensional coordinate measurement on the market. ATOS measures different object sizes, surface finishes, and complexities giving versatility to 3D digitizing by delivering: Accurate 3D coordinates and high data quality Full-field deviation to CAD, 2D and part-to-part Plug-and-Play solution The complete plug-and-play solution incorporates everything required for automated digitizing and inspection, no additional planning investment is necessary. All that is required on site is a single power socket. Section-based analysis, GD&T and trend analysis Complete measuring reports ATOS Triple Scan - Fast 3D Measurement The built-in ATOS optical 3D scanner with photogrammetry includes GOM s proven Triple Scan and Blue Light Technology. This new technology enables even higher detailed feature capture with faster measurement times for various part sizes, surfaces, finishes, and geometries, regardless of environmental lighting conditions. Mobile, automated quality control The mobile, industrial ATOS ScanBox is quickly setup and requires no fixings to the factory floor or special measuring plates. The ATOS ScanBox can easily be transported from plant to plant or location to location thus supporting production ramp up or new product launches. Small footprint with large possibilities Although the ATOS ScanBox only requires 11 m² floor space it is possible to measure parts up to 2 m. The ATOS ScanBox is also available in a smaller variation requiring only 5 m² for measuring smaller parts, and a larger version designed for simple crane and forklift loading of parts and components up to 3 m.
Technical Data ATOS ScanBox 5108 ATOS ScanBox 5120 ATOS ScanBox 6130 Space requirements 2.00 m x 2.55 m x 2.70 m 3.30 m x 3.30 m x 2.70 m 4.25 m x 4.25 m x 2.70 m (W x L x H) Power supply 200 415 V (3-Phase, 16 A) 200 500 V (3-Phase, 16 A) 200 500 V (3-Phase, 16 A) Max. part size up to 0.8 m up to 2 m up to 3 m Max. part weight up to 300 kg up to 500 kg up to 2000 kg Number of modules 1 2 2 Automated axes 7 7 7 Robot controller Master controller Module weight 880 kg (robot + rotation) 770 kg (robot) 660 kg (rotation) 800 kg (robot) 1000 kg (rotation) Viewing windows 5 8 6 Entry sliding door with safety locks sliding door with safety locks safety light curtain Opening width 800 mm 1400 mm 3100 mm Integrated control panel Status, Pause, Reset, E-Stop Status, Pause, Reset, E-Stop Status, Pause, Reset, E-Stop Floor mounting or fixing not required not required required Loading manual manual, transport cart, pallet truck manual, transport cart, pallet truck, crane, forklift Complete workflow in one software application ATOS Professional is a process-safe software solution that controls the ATOS ScanBox, produces precise 3D surface data, edits and post-processes the data and offers complete inspection and reporting in one software package. ATOS Professional features include: sensor control, on- and offline teaching, polygon mesh generation and editing, sectioning, feature and character line detection, primitive generation. For quality control and result analysis, tools such as CAD data import, import of measuring plans, registration, full-field deviation plots, section-based analysis, deviation of individual points, calipers, angles and diameters, report creation are available. GOM Inspect - Free result viewer, inspection and mesh processing The free GOM Inspect software is available to share ATOS results, further analyze data and easily discuss and detect problematic areas with colleagues, suppliers and customers for effective collaboration to speed-up decision making processes.
GOM Optical Measuring Techniques GOM is a global industrial manufacturer that develops and produces optical measurement solutions and technologies for 3D coordinate measurement and deformation analysis. GOM s measuring systems are based on digital image processing and are used in product development, quality assurance, material and component testing. Optical measuring technology and full-field surface measurement systems have become a standard tool within virtually all industries. The data from GOM s measurement systems are an invaluable tool for quality control in modern product development and production process chains. Copyright 2013 GOM mbh All rights reserved! Rev. C (en) 080413 Argentina ROBTEC ARGENTINA Phone +54 11 4787 6800 info@robtec.com Czech Republic MCAE Systems s.r.o. Phone +420 549 128 811 mcae@mcae.cz Japan Marubeni Solutions Corp. Phone +81 3 5778 8571 Sato-Yoshiyuki@marubeni-sys.com South-Korea OMA Co. Phone +82 42 822 9501 support@omagom.co.kr Australia MOSS Pty Ltd Phone +61 3 9946 1086 scan3d@iprimus.com.au Denmark Zebicon Phone +45 7650 9152 info@zebicon.com Malaysia, Singapore First High Tech Sdn Bhd Phone +603 7665 2188 info@1st.com.my Spain Metronic S.A. Phone +34 943 121400 comercial@metronicnet.com Austria Westcam Datentechnik GmbH Phone +43 5223 5550 90 office@westcam.at Finland Cascade Computing AB Phone +358 40 515 3341 info@cascade.fi Mexico CIM Co. Phone +52 55 5565 6633 info@cimco.com.mx Sweden Cascade Computing AB Phone +46 31 84 0870 info@cascade.se Brazil ROBTEC DO BRASIL Phone +55 11 3318 5100 info@robtec.com Greece EXPERTCAM Phone +30 210 2757 410 exprtcam@otenet.gr Pakistan Ultimate CAD Solutions Ltd Phone +92 51 5467572 shakir@ucs-int.com Thailand Mentel Co., Ltd. Phone +662 719 6969 info@mentel.co.th China Dom 3D Ltd. Phone +862 1 2898 6108 info@dom-3d.com.cn Hungary R-Design Studio Ltd. Phone +36 1 365 10 89 info@r-design.hu Poland ITA Phone +48 61 222 5800 info@ita-polska.com.pl Turkey Cadem A.S. Phone +90 216 557 64 64 gom@cadem.com.tr China Pro-Technic Machinery Ltd. Phone +852 2428 2727 atd@protechnic.com.hk India APM Technologies Phone +91 11 4163 1416 apmtech@vsnl.net Portugal S3D Phone +35 12 4457 3100 suporte@s3d.pt USA, Canada Capture 3D Inc. Phone +1 714 546 7072 info@capture3d.com China, Taiwan Road Ahead Technologies Phone +886 2 2999 6788 marcel@rat.com.tw Indonesia PT Henindo Phone +62 21 489 9675 henvgs@attglobal.net Romania SPECTROMAS SRL Phone +40 21 3105190 info@spectromas.ro USA, Canada Trilion Quality Systems LLC Phone +1 215 710 3000 info@trilion.com Columbia USM Columbia S.A. Phone +57 4279 9000 gerencia@usm.com.co Iran Fadak Sanat Gostar (FSG) Phone +98 21 88 730 735 info@fadaksanat.com Russia, Kazakhstan NIAT Phone +7 495 3111198 info@niat-ntk.ru Venezuela AT Group Software Inc Phone +58 212 9432 446 dkinz@atgroup.com.ve Croatia, Slovenia Topomatika d.o.o. Phone +385 91 5046 239 info@topomatika.hr Israel Globus Technical Equipments Ltd. Phone +972 9 9560444 nir@globus.co.il South Africa RGC Engineering Pty Phone +27 11 531 0766 info@rgcengineering.co.za Vietnam AIE Phone +84 43 7345 435 aie@vnn.vn GOM mbh Mittelweg 7-8 38106 Braunschweig Germany Phone +49 531 390 29 0 Fax +49 531 390 29 15 info@gom.com GOM International AG Bremgarterstrasse 89B 8967 Widen Switzerland Phone +41 5 66 31 04 04 Fax +41 5 66 31 04 07 international@gom.com GOM UK Ltd Unit 14 The Cobalt Centre Coventry, CV3 4PE United Kingdom Phone +44 2476 639920 Fax +44 2476 516990 info-uk@gom.com GOM France SAS 10 Quai de la Borde 91130 Ris Orangis France Phone +33 1 60 47 90 50 Fax +33 1 69 06 63 60 info-france@gom.com GOM Branch Benelux Interleuvenlaan 15 F 3001 Leuven Belgium Phone +32 16 408 034 Fax +32 16 408 734 info-benelux@gom.com GOM Italia Srl Via Lomellina 10/6 20090 Buccinasco (MI) Italy Phone +39 02 457 01 564 Fax +39 02 457 12 801 info-italia@gom.com