NPort 6600 Series. 8/16/32-port RS-232/422/485 rackmount secure terminal servers. Overview. LCD Panel Makes Configuration Easy

Similar documents
NPort 5600 Series. 8 and 16-port RS-232/422/485 rackmount serial device servers. Overview. Serial-to-Ethernet Device Servers

NPort 6000 Terminal Servers CN2600 Terminal Servers...9-4

NPort 5200 Series. 2-port RS-232/422/485 serial device servers. Specifications. Serial-to-Ethernet Device Servers

Features and Benefits. SNMP MIB-II for network management. Certifications

NPort 6100/6200 Series

NPort 6400/6600 Series

NPort 5400 Series. 4-port RS-232/422/485 serial device servers. Network-Readiness for up to Four Serial Devices

NPort 5400 Series. 4-port RS-232/422/485 serial device servers. Network-Readiness for up to Four Serial Devices

Features and Benefits. User-friendly LCD panel for easy installation Adjustable termination and pull high/low resistors.

NPort IA5000A Series. 1, 2, and 4-port serial device servers for industrial automation. Overview

NPort S8000 Series. Combo switch / serial device servers. Overview. Supports the Full Range of NPort 5000 Series Device Server Functions

NPort 5100A Series. 1-port RS-232/422/485 serial device servers. Overview. A Greener Serial-to-Ethernet Solution

NPort IA5000 Series. 1 and 2-port serial device servers for industrial automation. Overview

Features and Benefits. Compact design for easy installation. Certifications

NPort IA5000A Series. 1, 2, and 4-port serial device servers for industrial automation. Overview

NPort 5000AI-M12 Series

Features and Benefits. Certifications

Features and Benefits. Certifications

NPort Z2150/Z3150 Series

Features and Benefits. Certifications

Features and Benefits. Fast 3-step web-based configuration. Certifications

5600 Series. 8 and 16-port Serial Device Servers. Features. Internet Readiness for up to 16 Serial Devices

Features and Benefits. Certifications

NPort 6000 Series User s Manual

1 to 16-port RS-232, RS-422/485, and RS-232/422/485 USB-to-serial converters. Features and Benefits. Certifications

DT Desktop Series

NPort W2150A/W2250A Series

Features and Benefits. Certifications

Features and Benefits. Certifications

Arm-based palm-sized industrial computers with 2 serial ports and 2 LAN ports. Features and Benefits. Certifications

Feature and Benefits. Certifications

Arm-based wireless-enabled DIN-rail industrial computers with 2 serial ports and 2 LAN ports. Features and Benefits.

NPort W2150A/W2250A. 1 and 2-port serial-to-wifi (802.11a/b/g/n) device servers with wireless client. Overview

Serial-to-Ethernet Device Servers

Feature and Benefits. Certifications

MGate 5105-MB-EIP Series

Features and Benefits. Certifications

Features and Benefits. Certifications

Features and Benefits. Certifications

Features and Benefits. Certifications

MGate 4101-MB-PBS Series

Compact, fanless, vibration-proof computers for rolling stock applications. Features and Benefits. Certifications

Arm-based DIN-rail industrial computers with 4 serial ports, 2 LAN ports, 8 DI/DO, and VGA. Features and Benefits. Certifications

MGate 5102-PBM-PN Series

Features and Benefits. Certifications

IDS-141A/181A. Industrial 4-port/8-port slim type serial to Ethernet device server. Features. Introduction. DS-Tool

Serial Device Servers

Features and Benefits. Certifications

Features and Benefits. Certifications

NPort DT/DTL Series User s Manual

Serial Device Servers

10 Industrial Media Converters

iopac 8020 Series Rugged modular RTU controllers Overview Programmable RTU Controllers Ethernet bypass feature for seamless data transmission

NPort 6600 Series Quick Installation Guide

Embedded CPU Modules

iopac 8020 Series Rugged modular RTU controllers Overview Programmable RTU Controllers Ethernet bypass feature for seamless data transmission

MGate MB3000 Modbus Gateway User s Manual

NetCom Plus 411 (NetCom 411, NetCom 411 PRO)

NetCom Plus 113 (NetCom 113, NetCom 113 PRO)

Features. Preliminary. Industrial IEEE b/g/n with 2x10/100Base-T(X) 1x RS-232/422/485 IoT LTE LPWAN Gateway. Introduction


3U 19-inch IEC native PRP/HSR computers with Intel Celeron, Core i3 or i7 CPU. Features and Benefits. Certifications

NetCom Plus 413 (NetCom 413, NetCom 413 PRO)

iopac 8500 Series Rugged modular RTU controllers Overview Programmable Controllers High Sampling Rate Analog Input Prerecord Feature

NetCom Plus 111 (NetCom 111)

OnCell G3150A-LTE Series

Industrial Gateway Solutions

Serial Device Servers

Features and Benefits. Certifications

Features and Benefits. Certifications

iologik 4000 Series Modular remote I/O Introduction iologik E4200 Specifications Remote I/O Slice Form Factor and Flexible I/O Variety

iologik E1200H Series

Features and Benefits. Certifications

Features and Benefits. Certifications

Media Converters. Media Converters. Product Selection Guides

Features and Benefits. Certifications

Features and Benefits. Certifications

iologik 2500 HSPA/GPRS/WLAN Series

SE5908A Series SE5916A Series. 8 or 16-Port IEC Certified Industrial Rack-Mount Secure Serial Device Server FEATURE HIGHLIGHTS

Real/Virtual COM. JetPort Commander

MGate MB3170/MB3270 Quick Installation Guide

IES615-2D series Industrial Ethernet switch User manual Shenzhen 3onedata Technology Co.,Ltd

EDS-G205-1GTXSFP/G308 Series

Product Selection Guides Serial Communication PCI Express Boards Multiport Serial Universal PCI Boards Boards ISA Boards

USB-4COM RJ45. Contact Online. More Pictures. Click on the thumbnails for the large picture. Overview

iologik E2200 Series Smart Ethernet remote I/O with Click&GO Logic Introduction Remote I/O PC-Free Alarm and Control Intelligence

IEC / EN G-port Gigabit modular managed rackmount Ethernet switches STAT PWR1 PWR2 FAULT MASTER COUPLER LNK/ACT SPEED FDX/HDX

Support 1 RS-232 or RS-485/422 serial port to 1 10/100Base-T(X) self-adaptive Ethernet interface

Modbus TCP/RTU Gateway

PT-7728 Series. IEC G-port Gigabit modular managed Ethernet switch. Introduction PT-7728

V2201 Series. Fanless, ultra-compact x86 IIoT embedded computer and gateway. Overview. Appearance. Compact/Fanless Computers

Features and Benefits. Certifications

IES615-2D Series. Industrial Ethernet Switch. User Manual. Summarize. Panel layout. Packing list. Features. Shenzhen 3onedata Technology Co., Ltd.

PT-7728/7828 Quick Installation Guide

NetCom Plus 413 POE. Contact Online. More Pictures. Click on the thumbnails for the large picture. Overview

Features and Benefits. Certifications

MESR321. Vlinx Isolated Industrial Modbus Ethernet to Serial Gateway B&B ELECTRONICS PRODUCT INFORMATION

Shared Microwave Detector System

IMC-P111FX Series IMC-P111P Series

Quad-core fanless DIN-rail automation computer. LED Indicators (power, storage, SD) Grounding Connector. LAN Ports x 2 (RJ45) Power Input DC V

Transcription:

Terminal Servers NPort 6600 Series 8/16/32-port RS-232/422/485 rackmount secure terminal servers Up to 32 ports for high-density environments Supports IPv6 Modular design for scalability Security features based on IEC-62443 Nonstandard baudrates supported with high precision Port buffers for storing serial data when the Ethernet is offline Ethernet redundancy (STP/RSTP/Turbo Ring) with network module DES/3DES/AES for highly secure data transmissions Universal high-voltage ranges: 100 to 240 VAC or 88 to 300 VDC Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC) Overview The NPort 6600 series of secure device servers is the right choice for applications that use large numbers of serial devices packed into a small space. Security breaches are intolerable and the NPort 6600 ensures data transmission integrity with support of DES, 3DES, and AES encryption algorithms. Serial devices of any type can be connected to the NPort 6600, and each serial port on the NPort can be configured independently for RS-232, RS-422, or RS-485 transmission. LCD Panel Makes Configuration Easy The NPort 6600 has a built-in LCD panel for configuration. The panel displays the server name, serial number, and IP address, and any of the device server s configuration parameters, such as IP address, netmask, and gateway address, can be updated easily and quickly. Note: The LCD panel is only available with standard temperature models. Adjustable Resistor Values for RS-485 Communication The NPort 6600 provides adjustable termination, pull high, and pull low resistors for RS-485 communication. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high and pull low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values works for every environment, the NPort 6600 allows manual adjustment of the resistor values for each serial port using built-in DIP switches. DIP switches 1 www.moxa.com

Specifications Ethernet Interface Number of Ports: 1 Speed: 10/100 Mbps, auto MDI/MDIX Connector: 8-pin RJ45 Magnetic Isolation: 1.5 kv built-in Optical Fiber Interface (with network module) Wavelength Optical Power Fiber Cable Type OM1 Multi-Mode 100BaseFX 50/125 μm 800 MHz*km Single-Mode G.652 Typical Distance 4 km 5 km 40 km Typical (nm) 1300 1310 TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 TX Range (dbm) -10 to -20 0 to -5 RX Range (dbm) -3 to -32-3 to -34 Link Budget (db) 12 29 Dispersion Penalty (db) 3 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the typical distance of a specific fiber transceiver as follows: Link budget (db) > dispersion penalty (db) + total link loss (db). Serial Interface Number of Ports: 8, 16, or 32 Serial Standards: NPort 6610: RS-232 NPort 6650: RS-232/422/485 Connector: 8-pin RJ45 RS-485 Data Direction Control: ADDC (Automatic Data Direction Control) Console Port: Dedicated RS-232 console port on rear panel (8-pin RJ45) Serial Communication Parameters Data Bits: 5, 6, 7, 8 Stop Bits: 1, 1.5, 2 Parity: None, Even, Odd, Space, Mark Flow Control: RTS/CTS, DTR/DSR, X/XOFF Baudrate: 50 bps to 921.6 kbps (supports nonstandard baudrates) Pull High/Low Resistor for RS-485: 1 kω, 150 kω Terminator for RS-485: 120 Ω Serial Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: Tx+, Tx-, Rx+, Rx-, GND RS-485-4w: Tx+, Tx-, Rx+, Rx-, GND RS-485-2w: Data+, Data-, GND Memory Expansion Slot Slot Type: SD slot (supports up to 2 GB) Software Network Protocols: ICMP, IPv4/v6, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, ARP, PPPoE, HTTPS Security Protocols: SSLv3, TLSv1.0/1.1/1.2 Configuration Options: Web Console, Serial Console, Telnet Console, Windows Utility Windows Real COM Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded Fixed TTY Drivers: SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X Linux Real TTY Drivers: Linux 2.4.x, 2.6.x, 3.x, 4.x Management: SNMP MIB-II IP Routing: Static, RIP-I, RIP-II Operation Modes Standard: Real COM, TCP Server, TCP Client, UDP, Pair Connection, RFC2217, Terminal, Reverse Telnet, Ethernet Modem, Printer, PPP, Disabled Secure: Secure Real COM, Secure TCP Server, Secure TCP Client, Secure Pair Connection, SSH, Reverse SSH Applications Terminal Sessions: 8 sessions per port Physical Characteristics Housing: Metal Weight: NPort 6600-8: 3,460 g (7.63 lb) NPort 6600-16: 3,580 g (7.89 lb) NPort 6600-32: 3,600 g (7.94 lb) Dimensions: Without ears: 440 x 195 x 44 mm (17.32 x 7.68 x 1.73 in) With ears: 480 x 195 x 44 mm (18.9 x 7.68 x 1.73 in) Environmental Limits Operating Temperature: Standard Models: 0 to 55 C (32 to 131 F) Wide Temp. Models: -40 to 75 C (-40 to 167 F) High-Voltage Wide Temp. Models: -40 to 85 C (-40 to 185 F) Storage Temperature: Standard Models: -40 to 75 C (-40 to 167 F) Wide Temp. Models: -40 to 75 C (-40 to 167 F) High-Voltage Wide Temp. Models: -40 to 85 C (-40 to 185 F) Ambient Relative Humidity: 5 to 95% (non-condensing) Power Requirements Input Voltage: AC Models: 100 to 240 VAC DC Models: ±48 VDC (20 to 72 VDC, -20 to -72 VDC), 110 VDC (88 to 300 VDC) Input Current: AC Models: 140 ma @ 100 VAC (8 ports) 192 ma @ 100 VAC (16 ports) 285 ma @ 100 VAC (32 ports) DC Models: 293 ma @ 48 VDC 200 ma @ 88 VDC Alarm Contact: Relay output with current-carrying capacity of 1 A @ 24 VDC 2 www.moxa.com

Standards and Certifications Safety: UL 60950-1 EMC: EN 55032/24 EMI: CISPR 32, FCC Part 15B Class A EMS: NPort 6600-8/16/32: IEC 61000-4-4 EFT: Power 1 kv; Signal 0.5 kv IEC 61000-4-5 Surge: Power: 2 kv IEC 61000-4-11 DIPs NPort 6600 48V models: IEC 61000-4-4 EFT: Power: 1 kv; Signal: 0.5 kv IEC 61000-4-5 Surge: Power: 1 kv NPort 6650 HV models: IEC 61000-4-4 EFT: Power: 4 kv; Signal: 2 kv IEC 61000-4-5 Surge: Power: 2 kv Freefall: IEC-68-2-6, IEC-68-2-34, IEC-68-2-32 Vibration: IEC-68-2-6, IEC-68-2-34 Green Product: RoHS, CRoHS, WEEE Transportation: NEMA TS2 Dimensions and Pin Assignment Reliability Alert Tools: Built-in buzzer and RTC (real-time clock) Automatic Reboot Trigger: Built-in WDT (watchdog timer) MTBF (mean time between failures) Time: NPort 6610-8: 135,891 hrs NPort 6610-16: 102,373 hrs NPort 6610-32: 68,707 hrs NPort 6650-8: 636,600 hrs NPort 6650-16: 439,673 hrs NPort 6650-32: 310,078 hrs NPort 6650-8-HV-T: 501,171 hrs NPort 6650-16-HV-T: 380,006 hrs NPort 6650-32-HV-T: 290,914 hrs Standard: Telcordia (Bellcore) Standard Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty Unit: mm (inch) Pin Assignment 1 8 8-pin RJ45 Standard model 440 (17.32) 462.6 (18.35) 195 (7.68) 31.8 (1.25) 44 (1.73) PIN RS-232 RS-422/ 485-4W RS-485-2w 1 DSR (in) 2 RTS (out) TxD+ 3 GND GND GND 4 TxD (out) TxD- 5 RxD (in) RxD+ Data+ 6 DcD (in) RxD- Data- 7 CTS (in) 8 DTR (out) 480 (18.9) Wide temp. model 3 www.moxa.com

Ordering Information Available Models NPort 6610-8: 8-port RS-232 to Ethernet secure terminal server, 100 to 240 VAC power input, 0 to 55 C NPort 6610-8-48V: 8-port RS-232 to Ethernet secure terminal server, ±48 VDC power input, 0 to 55 C NPort 6610-16: 16-port RS-232 to Ethernet secure terminal server, 100 to 240 VAC power input, 0 to 55 C NPort 6610-16-48V: 16-port RS-232 to Ethernet secure terminal server, ±48 VDC power input, 0 to 55 C NPort 6610-32: 32-port RS-232 to Ethernet secure terminal server, 100 to 240 VAC power input, 0 to 55 C NPort 6610-32-48V: 32-port RS-232 to Ethernet secure terminal server, ±48 VDC power input, 0 to 55 C Package Checklist 1 NPort 6600 secure device server Serial cable: CBL-RJ45M9-150 Power cord (AC models only)* Rack-mounting kit: WK-44-01 Documentation and software CD Quick installation guide (printed) Warranty card *For AC models, the package includes one power cord suitable for your region. NPort 6650-8: 8-port RS-232/422/485 to Ethernet secure terminal server, 100 to 240 VAC power input, 0 to 55 C NPort 6650-8-T: 8-port RS-232/422/485 to Ethernet secure terminal server, 100 to 240 VAC power input, -40 to 75 C NPort 6650-8-HV-T: 8-port RS-232/422/485 to Ethernet secure terminal server, 88 to 300 VDC power input, -40 to 85 C NPort 6650-8-48V: 8-port RS-232/422/485 to Ethernet secure terminal server, ±48 VDC power input, 0 to 55 C NPort 6650-16: 16-port RS-232/422/485 to Ethernet secure terminal server, 100 to 240 VAC power input, 0 to 55 C NPort 6650-16-48V: 16-port RS-232/422/485 to Ethernet secure terminal server, ±48 VDC power input, 0 to 55 C NPort 6650-16-T: 16-port RS-232/422/485 to Ethernet secure terminal server, 100 to 240 VAC power input, -40 to 75 C NPort 6650-16-HV-T: 16-port RS-232/422/485 to Ethernet secure terminal server, 88 to 300 VDC power input, -40 to 85 C NPort 6650-32: 32-port RS-232/422/485 to Ethernet secure terminal server, 100 to 240 VAC power input, 0 to 55 C NPort 6650-32-48V: 32-port RS-232/422/485 to Ethernet secure terminal server, ±48 VDC power input, 0 to 55 C NPort 6650-32-HV-T: 32-port RS-232/422/485 to Ethernet secure terminal server, 88 to 300 VDC power input, -40 to 85 C Optional Accessories (can be purchased separately) Note: One power cord suitable for your region is included in the product package. Additional power cords can be purchased separately. Please refer to the Power Accessory Selection Guide for details. Expansion Modules 6150 6250 6450 Use with the following NPort models 6610-8 6650-8 6610-16 6650-16 6610-32 6650-32 NM-TX01 NM-TX01-T 1 10/100BaseT(X) port NM-TX02 NM-TX02-T 2 10/100BaseT(X) ports NM-FX01-S-SC NM-FX01-S-SC-T 1 100BaseFX port, single-mode, SC NM-FX01-M-SC NM-FX01-M-SC-T 1 100BaseFX port, multi-mode, SC NM-FX02-S-SC NM-FX02-S-SC-T 2 100BaseFX ports, single-mode, SC NM-FX02-M-SC NM-FX02-M-SC-T 2 100BaseFX ports, multi-mode, SC Note: Expansion modules can be purchased separately. 4 www.moxa.com

Power Accessory Selection Guide Barrel Plug Type Locking Barrel Plug Power Cord O/P 12 VDC, 1.5 A, 100 to 240 VAC 10A/250V Power Cord, 183 cm Plug Type CN US JP EU AU UK CN Model Name PWR-12150-CN-S2 PWC-C13US-3B-183 PWC-C13JP-3B-183 PWC-C13EU-3B-183 PWC-C13AU-3B-183 PWC-C13UK-3B-183 PWC-C13CN-3B-183 Appearance 1 port NPort 6150 NPort 6250 2 ports NPort 6250-M-SC NPort 6250-S-SC 4 ports NPort 6450 NPort 6610-8 NPort 6650-8 CN2510-8 CN2610-8 8 ports CN2610-8-2AC CN2650-8 CN2650-8-2AC CN2650I-8 CN2650I-8-2AC NPort 6610-16 NPort 6650-16 CN2510-16 CN2610-16 16 ports CN2610-16-2AC CN2650-16 CN2650-16-2AC CN2650I-16 CN2650I-16-2AC 32 ports NPort 6610-32 Barrel Plug Type O/P Plug Type Locking barrel plug 12 VDC, 2 A, 100 to 240 VAC (desktop type) Must be used with one power cord 2.5A/250V Power Cord, 183 cm US JP EU AU UK Model Name PWR-12125-DT-S2 PWC-C7US-2B-183 PWC-C7JP-2B-183 PWC-C7EU-2B-183 PWC-C7AU-2B-183 PWC-C7UK-2B-183 Appearance 1 port NPort 6150 NPort 6250 2 ports NPort 6250-M-SC NPort 6250-S-SC 4 ports NPort 6450 NPort 6610-8 8 ports NPort 6650-8 NPort 6610-16 16 ports NPort 6650-16 32 ports NPort 6610-32 5 Moxa Inc. All rights reserved. Updated Oct. 24, 2017. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.