THE CERTIFICATE OF COMPETENCY

THE CERTIFICATE OF COMPETENCY AMEU (SOUTHERN AFRICA) GOOD HOPE BRANCH GOEIE HOOP-TAK JORGE PEREIRA WITSAND 19 FEBRUARY 2016 JORGE PEREIRA GCC PREPARATION CLASSES (PTY) LTD. 082 896 1 8489

THE CERTIFICATE OF COMPETENCY 2 Who is the certificated engineer? Where is he found? The history of the certificated engineer What is the certificate of competency and how to obtain it The certificated engineer a true professional An opportunity: the practical solution Plant engineering classes Syllabus of both PE and OHS Act Questions?

WHO IS THE CERTIFICATED ENGINEER? 3 A person who is registered with the Engineering Council of South Africa (ECSA) as a Registered Professional Certificated Engineer at Factories, Mines and Works, as a Marine Engineer and as a Mine Manager.

WHO IS THE CERTIFICATED ENGINEER? 4 A person who is registered with the Engineering Council of South Africa (ECSA) as a Registered Professional Certificated Engineer at Factories, Mines and Works, as a Marine Engineer and as a Mine Manager. Responsible for the supervision of plant and machinery in industry. The Occupational Health and Safety Act, No 85 of 1993 Mines Health and Safety Act. No 29 of 1996

WHERE IS HE FOUND? 5 Factories Mines and Works Ocean going ships Engineering Design Project Management Offices

WHERE IS HE FOUND? 6 Factories Mines and Works Ocean going ships Engineering Design Project Management Offices This plant or factory is required to employ and appoint a Competent Electrical and or Mechanical Certificated Engineer, who is in possession of a Government Certificate of Competency (government ticket).

WHERE IS HE FOUND? 7 Factories Mines and Works Ocean going ships Engineering Design Project Management Offices This plant or factory is required to employ and appoint a Competent Electrical and or Mechanical Certificated Engineer, who is in possession of a Government Certificate of Competency (government ticket). Stipulated in the General Machinery Regulations under clause 2(4) (a) (ii) of the (OHS Act).

WHERE IS HE FOUND? 8 Factories Mines and Works Ocean going ships Engineering Design Project Management Offices This plant or factory is required to employ and appoint a Competent Electrical and or Mechanical Certificated Engineer, who is in possession of a Government Certificate of Competency (government ticket). Stipulated in the General Machinery Regulations under clause 2(4) (a) (ii) of the (OHS Act). Issued by either the Department of Labour (DoL) or the Department of Minerals and Energy (DME) in Pretoria, in terms of the requirements of the above mentioned Acts and Regulations.

THE HISTORY OF THE CERTIFICATED ENGINEER 9 1911 the Union Parliament passed the Mines and Works Act.

THE HISTORY OF THE CERTIFICATED ENGINEER 10 1911 the Union Parliament passed the Mines and Works Act. Engineers holding the Engineers Certificate of Competency where the only Engineers recognized by law, who had the responsibilities defined by the regulations promulgated in the interest of safety in industry.

THE HISTORY OF THE CERTIFICATED ENGINEER 11 1911 the Union Parliament passed the Mines and Works Act. Engineers holding the Engineers Certificate of Competency where the only Engineers recognized by law, who had the responsibilities defined by the regulations promulgated in the interest of safety in industry. An Engineer wanting to practice engineering had to have a Certificate of Competency. The Certificated Engineer held a position of responsibility within the industry and the profession.

WHAT IS THE CERTIFICATE OF COMPETENCY AND HOW TO OBTAIN IT 12 Certificates of competency are issued by the Commission of Examiners established by the Department of Labour and Mineral Energy in terms of, the Occupational Health and Safety Act, No 85 of 1993 (OHS Act) in the case of factories and the Mines Health and Safety Act, No 29 of 1996 (MHS Act) in the case of mines and works.

WHAT IS THE CERTIFICATE OF COMPETENCY AND HOW TO OBTAIN IT 13 Three routes for Acceptance as a Candidate for the Examination for the Certificates of Competency as an Electrical or Mechanical Engineer.

WHAT IS THE CERTIFICATE OF COMPETENCY AND HOW TO OBTAIN IT 14 Three routes for Acceptance as a Candidate for the Examination for the Certificates of Competency as an Electrical or Mechanical Engineer. National (N) Diploma in Electrical Heavy Current (HC) or Mechanical Engineering, obtained through studies at a Technical College.

WHAT IS THE CERTIFICATE OF COMPETENCY AND HOW TO OBTAIN IT 15 Three routes for Acceptance as a Candidate for the Examination for the Certificates of Competency as an Electrical or Mechanical Engineer. National (N) Diploma in Electrical Heavy Current (HC) or Mechanical Engineering, obtained through studies at a Technical College. National Diploma in Electrical (HC) or Mechanical Engineering (S3), obtained through studies at a Technikon.

WHAT IS THE CERTIFICATE OF COMPETENCY AND HOW TO OBTAIN IT 16 Three routes for Acceptance as a Candidate for the Examination for the Certificates of Competency as an Electrical or Mechanical Engineer. National (N) Diploma in Electrical Heavy Current (HC) or Mechanical Engineering, obtained through studies at a Technical College. National Diploma in Electrical (HC) or Mechanical Engineering (S3), obtained through studies at a Technikon. B Degree in Electrical (HC) or Mechanical Engineering obtained through studies at a South African University.

WHAT IS THE CERTIFICATE OF COMPETENCY AND HOW TO OBTAIN IT 17 Acceptance is based on one of the previous mentioned academic qualifications, together with: at least two years of appropriate practical experience in the operation and maintenance of machinery, ie. Holding a Trade Diploma recognized by the (DoL), and a minimum age of 23 years.

WHAT IS THE CERTIFICATE OF COMPETENCY AND HOW TO OBTAIN IT 18 The candidate has to pass the following subjects (with a minimum mark of 50%) before a Certificate of Competency is issued: Plant Engineering applicable to Factories or Mines and Works Legal Knowledge: OHS Act and Regulations or MHS Act and Regulations.

WHAT IS THE CERTIFICATE OF COMPETENCY AND HOW TO OBTAIN IT 19 Without a letter of acceptance from the DoL, one cannot write any of the GCC exams. If one of the subjects is passed, then the candidate has three years to pass the other one, and failing to do that, the first exam has to be written again.

WHAT IS THE CERTIFICATE OF COMPETENCY AND HOW TO OBTAIN IT 20 Without a letter of acceptance from the DoL, one cannot write any of the GCC exams. If one of the subjects is passed, then the candidate has two years to pass the other one, and failing to do that, the first exam has to be written again. Information regarding practical experience, the initial qualifications and the Syllabus for the two examination subjects are obtainable from the DoL.

THE CERTIFICATED ENGINEER A TRUE PROFESSIONAL 21 ECSA registers professional engineering practitioners in four categories: Certificated Engineers Engineers Engineering Technologists Engineering Technicians

THE CERTIFICATED ENGINEER A TRUE PROFESSIONAL 22 ECSA registers professional engineering practitioners in four categories: Certificated Engineers Engineers Engineering Technologists Engineering Technicians In 1997 the ECSA approved a proposal by ICMEESA to change the registration title of the Certificated Engineer to Professional Certificated Engineer.

AN OPPORTUNITY: THE PRACTICAL SOLUTION 23 One major requirement of South Africa is to improve its technical skills improve productivity and allow all its citizens the opportunity to gain a high level of skills.

AN OPPORTUNITY: THE PRACTICAL SOLUTION 24 One major requirement of South Africa is to improve its technical skills improve productivity and allow all its citizens the opportunity to gain a high level of skills. The Certificate of Competency in engineering by Technikon or Technical College Study is within the grasp of many.

PLANT ENGINEERING CLASSES 25 About myself and what I offer to help future candidates. Jorge Pereira (Cert Eng) in Mechanical and Electrical Engineering. Jorge Pereira GCC Preparation Classes (Pty) Ltd. Part time classes in Cape Town for Plant Engineering candidates, that have preferably been accepted by the DoL.

PLANT ENGINEERING CLASSES 26 I started giving PE part time classes in 1999 at the Technical College of CT in Pinelands. Due to small attendance, the College stopped giving these classes in 2002. That was when I started giving classes in a private capacity by renting a class room at one of the Technical Colleges or at CPUT Bellville Campus for a number of years. I give these classes twice a year, that ends a week or two just before the exams which are in June and November.

PLANT ENGINEERING CLASSES 27 CPUT Electrotechnology S3 Part-time Classes Part-time classes on Electrotechnology S3, which is a requirement from the DoL for the Mechanical Engineering students that want to obtain the GCC qualification. Classes were from 2000 to 2011 at CPUT, Bellville Campus also for both semesters twice a year.

PLANT ENGINEERING CLASSES 28 I am a member of the ICMEESA and I have a column in the Western Cape Bulletin that comes out four times a year, where I give a PE question and answer from a past exam paper.

PLANT ENGINEERING CLASSES 29 In 2015, I was invited to participate in two one-day workshops organized by a joint venture between the DoL and ICMEE held in Wits University designed to help the candidates that are writing the GCC exams. Was one of three taking questions for: Mechanical Engineering Electrical Engineering (myself) Law. These one day workshops will continue in 2016.

SYLLABUS OF BOTH PE AND THE OHS ACT 30 Plant Engineering (PE) Composed of both Electrical and Mechanical Engineering. Any topic can be asked which makes this one of the most difficult exams in South Africa. There has never been any memos for these exam papers and one has to know each topic very well to be able to know if the answer is correct or not.

SYLLABUS OF BOTH PE AND THE OHS ACT 31 Plant Engineering (PE) Composed of both Electrical and Mechanical Engineering. Any topic can be asked which makes this one of the most difficult exams in South Africa. There has never been any memos for these exam papers and one has to know each topic very well to be able to know if the answer is correct or not. Have to be well prepared in both Electrical and Mechanical Engineering to be able to pass this exam.

SYLLABUS OF BOTH PE AND THE OHS ACT 32 Plant Engineering (PE) After I obtained the GCC qualification, I carried on collecting the exam papers and answering, treating it as a hobby until the present day which is now around 20 years.

SYLLABUS OF BOTH PE AND THE OHS ACT 33 Plant Engineering (PE) After I obtained the GCC qualification, I carried on collecting the exam papers and answering, treating it as a hobby until the present day which is now around 20 years. What I do is to work out the questions from the past exam papers step by step for both Mechanical and Electrical Engineering various subject topics.

SYLLABUS OF BOTH PE AND THE OHS ACT 34 Mechanical Engineering Combustion, dryness-fraction of steam, steam boilers, condensers, heat-exchangers, heat transfer, compressors, ICE, refrigeration, air condition, fans, belts, hydraulics, pumps, traction, thin-cylinders, springs, beams, struts, shear stress, catenaries, mechanics of machines, vehicle dynamics, etc..

SYLLABUS OF BOTH PE AND THE OHS ACT 35 Electrical Engineering Tariffs, power factor correction, transformers, parallel-transformers, cables, synchronous machines, alternators and motors, induction motors, transmission lines, fault level calculations, three-phase systems, illumination, etc. Classes run part-time, twice a week, Mondays and Wednesdays for three hours from 17h00 to 20h00 normally for eight weeks.

SYLLABUS OF BOTH PE AND THE OHS ACT 36 Electrical Engineering Tariffs, power factor correction, transformers, parallel-transformers, cables, synchronous machines, alternators and motors, induction motors, transmission lines, fault level calculations, three-phase systems, illumination, etc. Classes run part-time, twice a week, Mondays and Wednesdays for three hours from 17h00 to 20h00 normally for eight weeks. Compared to five days a week classes where candidates have no time at all to work on the different topics and to understand while solving the problems.

SYLLABUS OF BOTH PE AND THE OHS ACT 37 Plant Engineering (PE) This system gives the students home-work problems to do for the topic that we have gone. I will then solve the home-work problems on the board step by step before we start the next class. In this way the candidates have time to think and absorb the understanding that is needed to solve these problems.

SYLLABUS OF BOTH PE AND THE OHS ACT 38 Plant Engineering (PE) The only way to pass this PE exam is for one to solve and understand as many problems as possible for as many topics as possible, from past exam papers, and that is what I do in my classes. I am available for any suggestion, such as going to give these classes at their premises for a suitable number of candidates.

SYLLABUS OF BOTH PE AND THE OHS ACT 39 OHS Act The answers are all in the Act and the Regulations book that is obtainable from APCOR Products and Services. Collect past exam papers and answer as many questions as possible from the past exam papers with the aid of the Act and Regulation booklet.

SYLLABUS OF BOTH PE AND THE OHS ACT 40 OHS Act The answers are all in the Act and the Regulations book that is obtainable from APCOR Products and Services. Collect past exam papers and answer as many questions as possible from the past exam papers with the aid of the Act and Regulation booklet. Prepare for the PE exam first as this exam is most the difficult one to pass and it may take a while.

41 QUESTIONS?

42 THANK YOU JORGE PEREIRA (CERT ENG) 082 896 8489