CineLink 4K-D Multi-Channel IP Decoder [product image] We are receiving data on a moment-to-moment basis from all of our programs, and the video wall gives us a snapshot of events happening globally. - Ed Shubert, Senior Director of Corporate Security and Safety
Back Front HIGH-PERFORMANCE 4K & HD CAPTURE AND DECODING CineLink 4K-D Multi-Channel 4K Decoder The CineLink 4K-D is a multi-channel IP decoder that can decode and display up to four streams of low-latency 4K video. It is ideal for enterprise organizations needing to decode and display large volumes of content, or any team wanting to augment their video wall system with IP video sources. CineLink 4K-D decoders are part of the Alpha FX family of IP-enabled video wall technology. When combined with CineLink 4K-E encoders and an Alpha FX video wall controller, CineLink 4K-D decoders can be used to create a scalable, secure AV/IP system on your existing network. CineLink units are easily managed using CineNet software the same user-friendly platform you use to control your video wall system.
KEY BENEFITS Multi-Channel Decoding and Display CineLink 4K-D units can connect non-ip-enabled displays or controllers to your AV/IP network, enabling them to capture and display streamed video content. Each CineLink 4K-D has four outputs and can deliver up to four streams of 4K video content to your displays or controller. Easy Plug-and-Play Set-Up Once installed on your network, CineLink 4K-D units are automatically detected by CineNet software. IP streams appear in the CineNet interface and can be dragged and dropped onto your video wall. Route Any Decoder to Any Encoder CineNet makes it easy to route any CineLink 4K-D decoder to any CineLink 4K-E encoder, so content from any source on your network can be sent to any video wall controller or display. High-Quality H.264 Compression CineLink encoders and decoders leverage low-latency H.264 video compression. This efficient compression format delivers high-quality video while using less bandwidth than competing formats. TECHNICAL SPECIFICATIONS Video Decoding Maximum IP Decodes Compression Standard H.264 Bit Rate Range Rate Control Video Outputs Maximum Output Resolution Output Format Networking Connectivity Network Connector Network Standard IP Addressing Color Space Color Space Supported Power Power Supply Up to 2 x (3840x2160) @60Hz Up to 4 x (3840x2160) @30Hz Up to 4 x (1920x1080) @60Hz 100 Kbps to 500 Mbps CABAC, 100 Kbps to 800 Mbps CAVLC Constant Bit Rate (CBR), Variable Bit Rate (VBR), VBR with Constraints, Adjustable GOP Size Up to 4 x (4096x2160) @60Hz Up to 4 x (3840x2160) @60Hz 4 x Mini DisplayPort 1 x RJ45 100/1,000 base-t Ethernet; auto speed; half / full duplex; unicast, multi-unicast, multicast DHCP and static IP addressing RGB and YUV 8-bit and 10-bit support 90V-264V AC In, 60W
CineLink 4K-E Multi-Channel IP Encoder [product image] We are receiving data on a moment-to-moment basis from all of our programs, and the video wall gives us a snapshot of events happening globally. - Ed Shubert, Senior Director of Corporate Security and Safety
Back Front HIGH-PERFORMANCE 4K & HD ENCODING AND STREAMING CineLink 4K-E Multi-Channel 4K Encoder The CineLink 4K-E is a multi-channel IP encoder that can stream up to four channels of low-latency 4K or HD video. It is ideal for enterprise organizations needing to share large volumes of content - or any team wanting to augment their video wall system with IP video sources. CineLink 4K-E encoders are part of the Alpha FX family of IP-enabled video wall technology. When paired with CineLink 4K-D decoders or an Alpha FX video wall controller, CineLink 4K-E encoders create a scalable AV/IP system on your existing network. CineLink units are easily managed using CineMassive CineNet software the same user-friendly platform you use to control your video wall system.
KEY BENEFITS Stream Up to Four Channels per Unit CineLink 4K-E encoders support up to four 4K input sources per unit, reducing the amount of hardware needed to support your AV/IP network. Easy Plug-and-Play Set-Up Install any quantity of CineLink 4K-E units to connect previouslyisolated devices to your video wall network. Once installed on your network, CineLink units are automatically detected by CineMassive CineNet software and can be displayed on your video wall. Route Any Encoder to Any Decoder CineNet software makes it easy to route any CineLink 4K-E encoder to any CineLink 4K-D decoder, so content from any source on your network can be sent to any video wall controller or display. High-Quality H.264 Streaming CineLink encoders leverage low-latency H.264 video compression. This efficient compression format delivers high-quality video while using less bandwidth than competing formats. Only Encoders Needed with an Alpha FX Controller Since Alpha FX video wall controllers natively decode IP streams, you can simply connect CineLink 4K-E encoders to your content sources and stream them directly to your controller no decoders needed. TECHNICAL SPECIFICATIONS Video Encoding Maximum Simultaneous Encodes Compression Standard H.264 Bit Rate Range Rate Control Audio Encoding Compression Standard Audio Sample Frequency Audio Bit Rates Video Inputs Maximum Input Resolution Input Format Audio Inputs Input Format Networking Connectivity Network Connector Network Standard IP Addressing Color Space Color Space Capture Chroma Sub-Sampling Power Power Supply Up to 2 x (4096x2160) @60Hz 4:2:0 Up to 2 x (3840x2160) @60Hz 4:2:0 Up to 3 x (1920x1200) @60Hz 4:4:4 Up to 3 x (1920x1080) @60Hz 4:4:4 Up to 4 x (4096x2160) @30Hz 4:2:0 Up to 4 x (3840x2160) @30Hz 4:2:0 Up to 4 x (1920x1080) @60Hz 4:2:0 50 Kbps to 120 Mbps; 15 Mbps (default) Constant Bit Rate (CBR), Variable Bit Rate (VBR), Favor Quality, Adjustable GOP Size MPEG-4 AAC-LC/HEv1/HEv2 32 khz; 44.1 khz; 48 khz Up to 576 Kbps (AAC-LC); Up to 288 Kbps (AAC- HEv1); Up to 144 Kbps (AAC-HEv2) Up to 2 x (4096x2160) @60Hz Up to 2 x (3840x2160) @60Hz Up to 4 x (4096x2160) @30Hz Up to 4 x (3840x2160) @30Hz 4 x HDMI with audio support 4 x HDMI digital LPCM two-channel stereo audio 1 x RJ45 100/1,000 base-t Ethernet; auto speed; half / full duplex; unicast, multi-unicast, multicast IPv4 support; DHCP and static IP addressing RGB and YUV 8-bit and 10-bit support 4:4:4 (8-bit); 4:2:2 (8-bit); 4:2:0 (8-bit and 10-bit); 4:0:0 (8-bit and 10-bit) 90V-264V AC In, 60W
CineLink 4K-E-Loop Multi-Channel IP Encoder with HDMI Loop-Out [product image] We are receiving data on a moment-to-moment basis from all of our programs, and the video wall gives us a snapshot of events happening globally. - Ed Shubert, Senior Director of Corporate Security and Safety
Back Front HIGH-PERFORMANCE 4K & HD ENCODING AND STREAMING CineLink 4K-E-Loop Multi-Channel 4K Encoder with HDMI Loop-Out The CineLink 4K-E-Loop is an IP encoder that streams up to four channels of low-latency 4K video and features four zero-latency HDMI loop-outs. It is ideal for enterprise organizations needing to share large volumes of content, or any team wanting to augment their video wall system with IP video sources. CineLink 4K-E-Loop encoders are part of the Alpha FX family of IP-enabled video wall technology. When paired with CineLink 4K-D decoders or an Alpha FX video wall controller, CineLink 4K-E-Loop encoders create a scalable AV/IP system on your existing network. The CineLink 4K-E-Loop is managed with CineMassive CineNet software the same user-friendly platform you use to control your video wall system.
KEY BENEFITS Stream Up to Four Channels per Unit CineLink 4K-E-Loop encoders can stream up to four 4K input sources per unit, reducing the amount of hardware needed to support your AV/IP network. Zero-Latency HDMI Loop-Outs In addition to encoding and streaming 4K video, the CineLink 4K-E-Loop provides 4 HDMI loop-outs. The loop-outs can be used to send unaltered, zerolatency video from workstations to desktop monitors with no additional hardware. Easy Plug-and-Play Set-Up Simply connect CineLink 4K-E-Loop units to your workstations to start streaming them to your video wall. Once installed on your network, CineLink units are automatically detected by CineMassive CineNet software and can be displayed on your video wall. Route Any Encoder to Any Decoder CineNet software makes it easy to route any CineLink 4K-E-Loop encoder to any CineLink 4K-D decoder, so content from any input source on your network can be sent to any video wall controller or display. High-Quality H.264 Streaming CineLink 4K encoders leverage low-latency H.264 video compression. This efficient compression format delivers high-quality video while using less bandwidth than competing formats. No Decoders Needed with an Alpha FX Controller Since Alpha FX video wall controllers natively decode IP streams, you can simply connect CineLink 4K-E-Loop encoders to your content sources and stream them directly to your controller no external decoders needed. TECHNICAL SPECIFICATIONS Video Encoding Maximum Simultaneous Encodes Compression Standard H.264 Bit Rate Range Rate Control Audio Encoding Compression Standard Audio Sample Frequency Audio Bit Rates Video Inputs Maximum Input Resolution Input Format Audio Inputs Input Format Outputs / Loop-Out Output / Loop-Out Networking Connectivity Network Connector Network Standard IP Addressing Color Space Color Space Capture Chroma Sub-Sampling Power Power Supply Up to 2 x (4096x2160) @60Hz 4:2:0 Up to 2 x (3840x2160) @60Hz 4:4:4 Up to 3 x (1920x1200) @60Hz 4:4:4 Up to 3 x (1920x1080) @60Hz 4:4:4 Up to 4 x (4096x2160) @30Hz 4:2:0 Up to 4 x (3840x2160) @30Hz 4:2:0 Up to 4 x (1920x1080) @60Hz 4:2:0 50 Kbps to 120 Mbps; 15 Mbps (default) Constant Bit Rate (CBR), Variable Bit Rate (VBR), Favor Quality, Adjustable GOP Size MPEG-4 AAC-LC/HEv1/HEv2 32 khz; 44.1 khz; 48 khz Up to 576 Kbps (AAC-LC); Up to 288 Kbps (AAC-HEv1); Up to 144 Kbps (AAC-HEv2) Up to 2 x (4096x2160) @60Hz Up to 2 x (3840x2160) @60Hz Up to 4 x (4096x2160) @30Hz Up to 4 x (3840x2160) @30Hz 4 x HDMI with audio support 4 x HDMI digital LPCM two-channel stereo audio 4 x 3.5 mm analog stereo audio 1 x 3.5 mm stereo mic in 4 x HDMI with audio support 2 x RJ45 100/1,000 base-t Ethernet; auto speed; half / full duplex; unicast, multi-unicast, multicast IPv4 support; DHCP and static IP addressing RGB and YUV 8-bit and 10-bit support 4:4:4 (8-bit); 4:2:2 (8-bit); 4:2:0 (8-bit and 10-bit); 4:0:0 (8-bit and 10-bit) 90V-264V AC In, 60W
SCHEDULE A LIVE DEMO Clients using CineMassive technologies for critical visualization 1.844.891.6090 sales@cinemassive.com