C101 ISA/PCI SuperSync Board User s Manual Fifth Edition, June 2008 www.moxa.com/product 2008 Moxa Inc., all rights reserved. Reproduction without permission is prohibited.
C101 ISA/PCI SuperSync Board User s Manual Technical Reference C101 ISA/PCI SuperSync Board User s Manual The software described in this manual is furnished under a license agreement and may be used only in accordance with the terms of that agreement. Copyright Notice Copyright 2008 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. Trademarks MOXA is a registered trademark of Moxa Inc. All other trademarks or registered marks in this manual belong to their respective manufacturers. Disclaimer Information in this document is subject to change without notice and does not represent a commitment on the part of Moxa. Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the products and/or the programs described in this manual, at any time. Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for its use, or for any infringements on the rights of third parties that may result from its use. This product might include unintentional technical or typographical errors. Changes are periodically made to the information herein to correct such errors, and these changes are incorporated into new editions of the publication. Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: +1-714-528-6777 Fax: +1-714-528-6778 Moxa Europe: Tel: +49-89-3 70 03 99-0 Fax: +49-89-3 70 03 99-99 Moxa China (Shanghai office): Toll-free: 800-820-5036 Tel: +86-21-5258-9955 Fax: +86-10-6872-3958 Moxa Asia-Pacific: Tel: +886-2-8919-1230 Fax: +886-2-8919-1231 2
Table of Contents! "#!!"# "# $ $%#! %#&' ( ) * & '() &!!!+,!+,,
1 1 Introduction 7,,:3! /!!"!"!"!"!
,,:3 &, 4&! /!!",/; ++5<=>?, 8, 9 /5 ;3&3#5 85 9! =#/, -5!" 4 ++5<=>?!",&*#=@;>AB",/;!" @;>*",/;!" 4&&,!!",+5,5:,!-!",7 C5#,84449!",*DD@:5!",:,:,!"
Introduction!" &*# ++5<=?>E, ", 5!" 4&0>B:/" &, 0><B:/"!" : 4&!8;9&, 8<9!" C #!", ",/;*@;>!", =8@;>9FAB8",/;9!" C =8=7 C5#,9 87 ;9!" &"G 4&0 :&#, &, 0;=>?89 >8'9!" % 4&0 :&#, &, 0&*.8'9!" 4 H>>> 8>@9FI 8D@9F; 8/@9!" # >>!" 5 4&0;> 87 59 &, 0< I87 59!" 4% ;%!" "! 3.,,: &!!!",,:8&, 4&9!", 5!" E-!" #$ 47%!#
2 2 Hardware Installation,,4!"!" "!
*&,,, '5&4 - J *&, - C -! <B: 4-*&, >5&4 - C 5&4 -#C 8 9 /C *&, &"G! 5&4,, 5&4, C ; = > : #C #C #C #33 #C A #C #C #C #33 #33 #C #C #33 #C #C 5 #C #C #33 #C #33 5= #C #C #33 #33 #C 5A #C #C #33 #33 #33 5 "!"
Hardware Installation &"G &"G 4-!H I&"G8;=>?>9 -&"GK8K49 ' *&, %0#E&C 8!9#E % &C!! %%K8K49 #E *&, 0",/;@;> EK;8K4;9 C*&, ",/;*5:> 7@;>",/;*5:> @;>@;> "!#
!" #!*&,!H % 4 4!4! *&, -!":!"&"G!"%!"&! ;!</&, "!- = "!&, -! > #*&, - &*#4 %- < E *&, 4-? "4! "!$
Hardware Installation *4&,, 8/4E9'5&4 4&!!4& #!" #!*4&!H % 4 4!4!!;/4&"!- ; "!4&-! = #*4&- &*#4 %- > E *4& < "4! $ J! *&, **4& "!%
3 3 Software Installation!,,:!"!"!" #$% #!
!"!7 C!*&, *4& %"& 3 7 C!*&, *4& & 5-5"#! 3C%% ; % 5 % #!"
Software Installation = % > %! % #!#
< %? H!%! #!$
Software Installation A!" %#$! % *&, *4&! #!%
$ &- '5&4 *&, 4 % *&, *4&. %!%!&!' ()*+!!,!' &!', #!&
Software Installation ; %-8AI9 *&, %."& 4CA *&, 4!!'/0 #!'
= &-1.12 -"4C 0!! '5&4 + & J%"$3 > % &-1!!8A55=5A59! #!(
Software Installation < %.41!!8#&9!? % 2-!!8;=>?>9! #!)
A % "!!8+5/,:/,9! I! *&, %! #!
Software Installation %!' 5&4 % J %! #!
# $ *4& () /4E% %&, /! / *4&4 % *4& *&,. %!%!&!' ()*+!!,!' #!"
Software Installation %- *4&& 4CA ; 4C%: 4CCC%: 4C*4& #!#
= % -,C &*4& > % "&!8+5/,:/,9 #!$
Software Installation < %? J %! #!%
'$(&!!E!! E! 37 C%%!%!&!' ()*+!5!',0!!!!% #!&
Software Installation ; %#$ #$%!,/5#,!!*&, ) *+ & ; -%J! L!' 89!' 5 5#,'!% 5#,% 0 Bin [subdirectory] Example [subdirectory] Lib [subdirectory] Readme [file] J %(5#,)& C 5#, #!'
= > "6.5%6468 9,/5#, setup,/5#,c!"859 : &,/5#, E* % 6 < E!'/0 6 C:\>CD C101DOS C:\C101DOS>CD BIN C:\C101DOS\BIN>setup Board No. Board Type Start Port Memory Bank Irq Board No. Board Type Start Port Memory Bank Irq 01 02 03 04 01 02 03 04 #!(
Software Installation?!%& 1 7 0!! '5&4 + & J%"$3 Board No. Board Type Start Port Memory Bank Irq 01 02 03 04 A %!!,46 Board No. Board Type Start Port Memory Bank Irq 01 02 03 04 I E** % 6! Board No. Board Type Start Port Memory Bank Irq 01 02 03 04 #!)
& 1!! :%6 E** % 6! 7!!&H 6 Board No. Board Type Start Port Memory Bank Irq Board No. Board Type Start Port Memory Bank Irq Board No. Board Type Start Port Memory Bank Irq 01 02 03 04 01 02 03 04 01 02 03 04 #!"
Software Installation ; E* %!6! = -.!1" #8% %5 Board No. Board Type Start Port Memory Bank Irq Board No. Tx Clock Dir Operation mode 01 02 03 04 01 02 03 04 > 46 E*!6! < "! #6 Board No. Tx Clock Dir Operation mode Board No. Tx Clock Dir Operation mode 01 02 03 04 01 02 03 04 #!"
? E* 9:!&* * 6 Board No. Tx Clock Dir Operation mode 01 02 03 04 A!'*)6465#,,"! C101-DRV,/5#, C!"859 : C:\>CD C101DOS C:\C101DOS>CD BIN C:\C101DOS\BIN>C101-DRV ##$%&'! ( )*!+ ),-*+ "(! * #!""
4 4 PIN Assignments and Cable Wiring %!" &!" ' $!
&,- 8C#.0",/;9 $!"
PIN Assignments and Cable Wiring./0-1 2! " $!#
&,- 8C#.0",/;9! #$%&'( $!$
Pin Assignments and Cable Wiring V.35 Interface (PCI) DB25 Pin Signal V.35 Pin Direction 11 TxDA P Out 10 TxDB S Out 13 RxDA R In 12 RxDB T In 16 TxCA Y In 14 TxCB AA In 21 TxCA U Out 19 TxCB W Out 23 RxCA V In 22 RxCB X In 4 RTS C Out 5 CTS D In 20 DTR H Out 6 DSR E In 8 DCD F In 7 GND B --- 25 232EN 9 GND Short for V.35 C101 ISA/PCI SuperSync Board User s Manual 4-5
Problem Report Form < = >? 8 &%; "*&, "*4& -; 66666666666!'#); 6666666666666666 5/!5; %666666666666666666666 %!9; %666666666 666666666!%5;,66666+M %666666 6666 6$!; "&, %6666666666 "4&%06666666666 %-"0 4 7!!
RETURN PROCEDURE 30!" 4!!!" #4" 84" 9!!" 34"384"39&!" %/%/ 4"!%
Revision History Document Edition Revision Date Revision Details 3 rd August 6, 2002 1. p. 4-2,3,4,5: Corrected the DB25 male port diagrams. The pin numbers were incorrectly labeled. 4 th August 8, 2003 1. p. 4-5: Change pin 16 s TxCA to TxC in A, pin 14 s TxCB to TxC in B, pin 21 s TxCA to TxC out A, and pin 19 s TxCB to TxC in B. and change pin 21 V. 35 pin from Y to U, and pin 19 V. 35 from AA to W in V.35 Interface (PCI). 2. Update the edition of this manual on the title page. 3. Update the Moxa phone number on the title page. C101 ISA/PCI SuperSync Board User s Manual