Ricoh SG 30DN MacProfile INSTALLATION GUIDE MAC OS X CAUTION DO NOT INSTALL THE RICOH (OEM) INKS THAT WERE PROVIDED WITH THE PRINTER. DO NOT POWER ON THE PRINTER BEFORE INSTALLING SAWGRASS SUBLIJET-R INK CARTRIDGES. DURING DOWNTIME, IT IS HIGHLY RECOMMENDED TO LEAVE THE PRINTER POWERED ON TO ALLOW THE RICOH AUTOMATIC MAINTENANCE UTILITIES TO KEEP THE PRINT HEAD NOZZLES CLEAR. v202064
SECTIONS: Macintosh Operating System Verifi cation ( page) Ricoh (OEM) Driver Download & Installation (7 pages) MacProfile Installation & Registration (8 pages) CAUTION During downtime, it is HIGHLY RECOMMENDED to leave the printer powered ON to allow the Ricoh Automatic Maintenance Utilities to keep the print head nozzles clear. The Ricoh GELJET has been engineered to perform automatic maintenance at various times in an effort to keep the print head nozzles in top condition. If this maintenance cannot be automatically performed, it is possible that the nozzles may suffer permanent effects. As a result, head cleanings may be unable to restore the print head to optimal operation. Note: If you experience any communication errors, a powered USB Hub may be required.
Ricoh SG 30DN Installation Guide Macintosh OS Verification Before you begin, you will need to verify your version of Mac OS. This is important when deciding which driver to download. You should only download drivers which are compatible with your version of Mac OS..) To check the version of your Mac OS, fi rst click the Apple icon in the top left corner of your desktop. Then scroll down and click About This Mac. The following window containing the version number should appear (see FIGURE ). The below example is running Version 0.6.4. Please note your version number and remember to only download those utilities which correspond with your version of Mac OS. 2 3 FIGURE PAGE of >>
Ricoh SG 30DN Installation Guide Ricoh (OEM) Driver Download & Installation The following instructions will demonstrate how to install the Ricoh (OEM) printer driver on computers running Mac OS X..) Before installing the MacProfile, you will need to install the Ricoh (OEM) printer driver. First, access the Ricoh website by entering www.ricoh.com in the address field of your web browser. Once there, click the Downloads tab (see FIGURE ). 2 FIGURE 2.) Select your local website (see FIGURE 2). FIGURE 2 PAGE of 7 >>
Ricoh (OEM) Driver Download & Installation 3.) Enter the model number of your printer in the search field and click Search. Then, click the link for your printer model under Driver in the results field (see FIGURE 3). SG 30DN 2 SG 30DN Afi cio SG 30DN Afi cio SG 30DN Afi cio SG 30DN 3 FIGURE 3 4.) To proceed, read the Ricoh Software License Agreement. If you agree with the terms of the agreement, click I Agree (see FIGURE 4). FIGURE 4 PAGE 2 of 7 >>
Ricoh (OEM) Driver Download & Installation 5.) Clicking I Agree will open the following web page. Locate and click the link that corresponds with your Operating System (see FIGURE 5). FIGURE 5 6.) Finally, locate the RPCS Raster Driver for your operating system and click the Download Icon (see FIGURE 6). The Ricoh (OEM) printer driver should now begin downloading to your computer. FIGURE 6 PAGE 3 of 7 >>
Ricoh (OEM) Driver Download & Installation 7.) Once the driver download has completed, click the download icon in the bottom right corner of your desktop (see FIGURE 7 > ). Next, double-click the r53405l4.dmg file (see FIGURE 7 > 2). The Ricoh_AficioSG30DN window should now appear (see FIGURE 8). Finally, double-click the Ricoh_ AficioSG30DN icon to begin the Ricoh (OEM) printer driver installation process (see FIGURE 8 > 3). 2 3 FIGURE 7 FIGURE 8 8.) Click Continue to allow the program to determine if the software can be installed (see FIGURE 9). FIGURE 9 PAGE 4 of 7 >>
Ricoh (OEM) Driver Download & Installation 9.) In the Introduction window, click Continue (see FIGURE 0). FIGURE 0 0.) In the License window, read the terms of the Software License Agreement and click Continue when fi nished (see FIGURE ). FIGURE PAGE 5 of 7 >>
Ricoh (OEM) Driver Download & Installation.) If you agree with the terms of the Software License Agreement, click Agree (see FIGURE 2). FIGURE 2 2.) Select the disk where you want to install the driver and click Continue (see FIGURE 3). FIGURE 3 2 PAGE 6 of 7 >>
Ricoh (OEM) Driver Download & Installation 3.) Click Install to place the driver in the standard folder location (see FIGURE 4). To install the driver in a different folder, click Change Install Location and browse to the desired folder. FIGURE 4 4.) Once installation has completed successfully, click Close to fi nish installing the software (see FIGURE 5). FIGURE 5 Congratulations! The Ricoh (OEM) printer driver has successfully been installed. Please proceed to the SubliJet-R Ricoh SG 30DN MacProfile Installation section. PAGE 7 of 7 >>
Ricoh SG 30DN Installation Guide MacProfile Installation & Registration The following instructions will demonstrate how to download, install, and register the SubliJet-R SG30DN MacProfile on Mac OS X..) First, access the Sawgrass website by entering www.sawgrassink.com in the address field of your web browser. Once there, highlight Technical Support > SubliJet-R > Ricoh SG 30DN, and highlight and click PowerDrivers & MacProfiles (see FIGURE ) 2 3 4 FIGURE 2.) Under MacProfiles: Ricoh Platforms, click the link for your printer (see FIGURE 2). FIGURE 2 PAGE of 8 >>
MacProfile Installation & Registration 3.) Once the download has completed, click the download icon in the bottom right corner of your desktop (see FIGURE 3 > ). Next, double-click the SubliJet-R GX e7700n.dmg file (see FIGURE 3 > 2). The Sawgrass Installer window should now appear (see FIGURE 4). Finally, double-click the SubliJet-R GX e7700n.pkg file to begin the installation process (see FIGURE 4 > 3). 3 2 FIGURE 3 FIGURE 4 4.) Click Continue to allow the program to determine if the software can be installed (see FIGURE 5). FIGURE 5 PAGE 2 of 8 >>
MacProfile Installation & Registration 5.) I n the Introduction window, click Continue (see FIGURE 6). FIGURE 6 6.) In the Read Me window, read the description of the two profiles being installed and click Continue when fi nished (see FIGURE 7). FIGURE 7 PAGE 3 of 8 >>
MacProfile Installation & Registration 7.) In the License window, read the terms of the Software License Agreement and click Continue when fi nished (see FIGURE 8). FIGURE 8 8.) If you agree with the terms of the Software License Agreement, click Agree (see FIGURE 9). FIGURE 9 9.) Click Open if you receive the following window (see FIGURE 0). FIGURE 0 PAGE 4 of 8 >>
MacProfile Installation & Registration 0.) You will use the Product ID to register your product. The Product ID is located in the MacProfile Registration window (see FIGURE 6). The easiest and fastest way to obtain a Registration Code 24/7 is by clicking the Obtain Registration Code button also located in the MacProfile Registration window. Follow the on-screen instructions to receive a Registration Code via an automatic E-mail. If you have difficulties with the e-mail option or if the computer being used is not connected to the Internet, note the Product ID and call (843) 884-575, Option or e-mail support@sawgrassink.com. Registration codes via phone or direct e-mail are provided 8:00 a.m. - 5:00 p.m. EST, Monday - Friday. Note: You must have a separate Registration Code for every machine on which the MacProfi le is installed..) The following instructions will show how to register Online. Note the Product ID as this will be required during the registration process and click Get Registration Code (see FIGURE ). 2 FIGURE PAGE 5 of 8 >>
MacProfile Installation & Registration 2.) On the Product Registration web page, fill in the required information and click Submit when complete (see FIGURE 2). Your Registration Code will now be sent to the e-mail address used during registration. FIGURE 2 3.) Once you have received the Registration Code, enter it into the Registration Code field and click Apply Registration Code (see FIGURE 3). FIGURE 3 2 PAGE 6 of 8 >>
MacProfile Installation & Registration 4.) You should receive the following window informing you that registration completed successfully (see FIGURE 4). Click OK to continue. FIGURE 4 5.) Select the disk where you want to install the MacProfile and click Continue (see FIGURE 5). FIGURE 5 2 6.) Click Install to place the MacProfile in the standard folder location (see FIGURE 6). To install the MacProfile in a different folder, click Change Install Location and browse to the desired folder. FIGURE 6 PAGE 7 of 8 >>
MacProfile Installation & Registration 6.) You should receive the following window informing you that installation has completed successfully. Click Close to fi nalize installation of the MacProfile (see FIGURE 6). FIGURE 6 Congratulations! The SubliJet-R SG 30DN MacProfile installation is complete. Please proceed to the Print Setup Guide that corresponds with your version of graphics software. For the absolute latest information and updates on all products, materials, processes and/or procedures relative to all offerings by or through Sawgrass Technologies, Inc., please refer to our website: www.sawgrassink.com PAGE 8 of 8 >>