P R O D U C T A P P L I C AT I O N Frame Supported Hot Aisle Containment (HAC) Solution The Frame Supported Hot Aisle Containment (HAC) Solution by Chatsworth Products (CPI) features a frame supported exhaust duct that is used over a contained hot aisle as part of a closed hot air return. This solution integrates with perimeter cooling, provides immediate improved cooling efficiency and is compatible with economization methods. The duct is supported by the frame instead of the cabinets, allowing a mix of cabinets to be installed within the row. It is ideal for colocation facilities and large scale data centers that support cabinet-level equipment installation and changes. Frame Supported Exhaust Duct Cabinet-independent frame and translucent exhaust duct cover the contained aisle to capture and vent airflow out of the aisle. Used as part of a closed return for the air handling system. Full Height Blanking Panel Translucent panel and seal used to fill gaps where entire cabinets are omitted from the cabinet row. Easy to trim to match required width. Supports roll-in/roll-out deployment and variable length cabinet rows created when cabinets of differing widths are deployed in the same row. Aisle Containment Exhaust Duct Edge Seal Flexible, curved seal used around the top of the duct to create a complete seal with overhead drop ceiling tiles. Aisle Containment Double Door Assembly Sliding double doors with automatic closing features and large transparent panels. Attaches to the ends of the Frame Supported Exhaust Duct to seal the ends of the contained aisle (this system not compatible with Single Door Assembly). Adjustable Height Filler Panel or Universal Cabinet End Panel Adjustable height panels used above standard equipment cabinets to seal gaps between the U Frame Supported Exhaust Duct and the cabinets. Alternately, Universal Cabinet End Panels adjusts in both height and width. Aisle Containment Cabinet To Floor Seal Kit or AisleLok Under Rack Panel Cabinet-specific trim panels used along the base of cabinets to seal the gap between the floor and the bottom of the cabinet frame. If not available from the cabinet manufacturer, trim and adhere AisleLok Under Rack Panel to seal gaps under cabinets. Containment Accessories Floor Mounting Template Cabinets and Accessories CPI Cabinet Systems Bottom Panels Air Dam Snap-In Filler Panels AisleLok Acrycell Sealing Tape KoldLok Raised Floor Grommets US & Canada +-800-8-99 Toronto, Ontario, Canada +90-80-7770 chatsworth.com Latin America +--0-7 Toll Free within Mexico 0-800-0-79 chatsworth.com.co Europe +-8--8 chatsworthproducts.co.uk Middle East & Africa Dubai, UAE +97--0 chatsworthproducts.co.uk Asia Pacific +8 880-0 chatsworth.com.cn techsupport@chatsworth.com
S O L U T I O N O V E R V I E W Flexible frame supported duct installed before the cabinets allows you to add, remove or omit cabinets as required Compatible with virtually any mix of cabinets; any width and heights up to U high Large open spans with ( m) to 0 ( m) clearance between frame support posts for bayed cabinets Built-in height, width and depth adjustments on frame beams, lateral supports and panels accommodate site differences and existing conditions reducing the need for complex, time-consuming, field modification or special-ordered parts Translucent duct and transparent door panels allow light to enter the contained aisle Doors close automatically to maintain containment and reduce recovery time A complete solution maximizes performance with baffles to seal around and within cabinets and the contained aisle Durable construction and maintenance-free design provide years of use O R D E R I N G I N F O R M AT I O N Frame Supported Exhaust Duct For 0" ( mm) to 7." (9 mm) Wide Frame 990-70 990-E0 L (. m) Span/Cabinet Row 990-70 990-E0 L (. m) Span/Cabinet Row 990-70 990-E0 L (.8 m) Span/Cabinet Row 990-70 990-E0 8 L (. m) Span/Cabinet Row 990-70 990-E0 0 L (.0 m) Span/Cabinet Row Note: Other widths/spans are available. Aisle Containment Exhaust Duct Edge Seal Part Number & Quantity Pack Pack 8-000 8-00 8 L (. m), clear plastic Note: Order sufficient length to surround the top perimeter of the duct. Aisle Containment Door Assembly Double Door 770-70 770-E0 With Painted Door Frames 770-70 770-E0 With Anodized Aluminum Door Frames Note: Order one Floor Mounting Template for each site, see Containment Accessories, page. Adjustable Height Filler Panel For up to U High Cabinet Height Difference 78-70 78-E0 For. W (00 mm) Cabinets 78-70 78-E0 For.0 W (0 mm) Cabinets 78-707 78-E07 For 7. W (700 mm) Cabinets 78-70 78-E0 For 9. W (70 mm) Cabinets 78-7 78-E For. W (800 mm) Cabinets For up to U High Cabinet Height Difference 78-70 78-E0 For. W (00 mm) Cabinets 78-70 78-E0 For.0 W (0 mm) Cabinets 78-708 78-E08 For 7. W (700 mm) Cabinets 78-7 78-E For 9. W (70 mm) Cabinets 78-7 78-E For. W (800 mm) Cabinets For up to 9U High Cabinet Height Difference 78-70 78-E0 For. W (00 mm) Cabinets 78-70 78-E0 For.0 W (0 mm) Cabinets 78-709 78-E09 For 7. W (700 mm) Cabinets 78-7 78-E For 9. W (70 mm) Cabinets 78-7 78-E For. W (800 mm) Cabinets For up to U High Cabinet Height Difference 78-79 78-E9 For. W (00 mm) Cabinets 78-70 78-E0 For.0 W (0 mm) Cabinets 78-7 78-E For 7. W (700 mm) Cabinets 78-7 78-E For 9. W (70 mm) Cabinets 78-7 78-E For. W (800 mm) Cabinets Aisle Containment Door Assembly Double Door Frame Supported Exhaust Duct Aisle Containment Exhaust Duct Edge Seal Adjustable Height Filler Panel
O R D E R I N G I N F O R M AT I O N Universal Cabinet End Panel 70-70 70-E0 70-70 70-E0 70-70 70-E0 70-7 70-E For up to U High Cabinet Height Difference For up to U High Cabinet Height Difference For up to 9U High Cabinet Height Difference 70-70 70-E0 70-7 70-E For up to U High Cabinet Height Difference 70-77 70-E7 70-79 70-E9 Note: Other widths available. Universal Cabinet End Panel Full Height Blanking Panel Full Height Blanking Panel 99-70 99-E0 99. H ( mm) x 0 W (0 mm), Each 99-70 99-E0 99. H ( mm) x 0 W (0 mm), Pack of Note: Center panel is translucent, sides are painted. Aisle Containment Cabinet To Floor Seal Kit for F-Series TeraFrame Gen Cabinet and GF-Series GlobalFrame Gen Cabinet Front Seal Kits 908-700 908-E00 Front Seal, For. W (00 mm) Cabinet 908-70 908-E0 Front Seal, For 7. W (700 mm) Cabinet 908-70 908-E0 Front Seal, For 9. W (70 mm) Cabinet 908-70 908-E0 Front Seal, For. W (800 mm) Cabinet Side Seal Kits 909-700 909-E00 Side Seal, For. D (800 mm) frame 909-708 909-E08 Side Seal, For 9. D (000 mm) frame 909-70 909-E0 Side Seal, For. D (00 mm) frame 909-7 909-E Side Seal, For. D (00 mm) frame 909-7 909-E Side Seal, For 7. D (00 mm) frame Note: Order one Front Seal Kit for each cabinet. Order one Side Seal Kit for each end of the cabinet row. Other sizes are available. For existing cabinets, check with CPI Technical Support to identify the correct Floor Seal Kit. Aisle Containment Cabinet to Floor Front Seal Kit Aisle Containment Cabinet to Floor Side Seal Kit
A C C E S S O R I E S Containment Accessory The following accessory is used to help install the containment doors. Floor Mounting Template 87-70 For Aisle Containment Double-Door Note: Reusable, order one per site. Floor Mounting Template Cabinet and Thermal Management Accessories Combine the following cabinets and cabinet-specific accessories to seal gaps and block airflow through and around cabinets. CPI Cabinet Systems F-Series TeraFrame Gen Cabinet FFU-C-C-B FFU-C-E-B U,. W (00 mm) x."d (00 mm) FFU-C-C-B FFU-C-E-B U, 7. W (700 mm) x."d (00 mm) FFU-C-C-B FFU-C-E-B U,. W (800 mm) x."d (00 mm) GF-Series GlobalFrame Gen Cabinet GF-A0-CB GF-A0-EB U,. W (00 mm) x."d (00 mm) GF-D0-CB GF-D0-EB U, 7."W (700 mm) x."d (00 mm) GF-C0-CB GF-C0-EB U,. W (800 mm) x."d (00 mm) Note: Other sizes are available. F-Series TeraFrame Gen Cabinet GF-Series GlobalFrame Gen Cabinet
A C C E S S O R I E S Air Dam, Bottom Panel and Rail Grommets for F-Series TeraFrame Gen and GF-Series GlobalFrame Gen Cabinets Air Dam For U High Cabinets 908-C0 908-E0 For. W (00 mm) Cabinets 908-C 908-E For 7. W (700 mm) Cabinets 908-C 908-E For. W (800 mm) Cabinets Bottom Panel For F-Series TeraFrame Gen Cabinet 9-C00 9-E00 For."W (00 mm) Cabinets 9-C0 9-E0 For 7."W (700 mm) Cabinets 9-C0 9-E0 For. W (800 mm) Cabinets Bottom Panel For GF-Series GlobalFrame Gen Cabinet 9080-C00 9080-E00 For."W (00 mm) Cabinets 9080-C0 9080-E0 For 7."W (700 mm) Cabinets 9080-C0 9080-E0 For. W (800 mm) Cabinets 9-00 Note: Match cabinet color. Other sizes available. Equipment Rail Grommet Kit For 7."W (700 mm) and."w (800 mm) GF-Series GlobalFrame Gen Cabinet, Pack of 8 Air Dam Bottom Panel Equipment Rail Grommet Kit Snap-In Filler Panels 7-00 7-E0 U x 9 EIA, Pack of 0 8-00 8-E0 U x 9 EIA, Pack of 0 Note: Also sold individually and in packs of each. Snap-In Filler Panel AisleLok Acrycell Sealing Tape 87-000 Expands. ( mm) to. (.7 mm), rolls,.8 L (0 m) 87-00 Expands.7 ( mm) to (. mm), rolls, 8. L (. m) 87-00 Expands.87 ( mm) to (0.8 mm), rolls, 8. L (. m) AisleLok Acrycell Sealing Tape AisleLok Under Rack Panel 877-00. H ( mm) x 7. W (99 mm) x D ( mm), Pack of 0 877-00. H ( mm) x. W (800 mm) x D ( mm), Pack of 0 Note: Floor seal for other cabinets and equipment. Do not use with F-Series TeraFrame or GF-Series GlobalFrame Cabinets. AisleLok Under Rack Panel KoldLok Raised Floor Grommets 7-00 Split Integral Grommet, 8 (0 mm) x (0 mm) opening, 0 each 87-00 Mini Grommet, W (7 mm) x -/ ( mm) opening, 0 each 87-00 Round Grommet,. (89 mm) Diameter, 0 each Note: Other styles and sizes available. Also sold individually. KoldLok Raised Floor Grommets
H O W T O G E T S TA R T E D The specific combination of components needed to create a complete Frame Supported Hot Aisle Containment (HAC) Solution will depend on a number of factors including room layout, ceiling height, whether there is a slab or raised access floor and what types of cabinet models are selected. To ensure you have a complete solution that addresses site- and cabinet-specific requirements, please contact CPI Technical Support for assistance developing a Bill of Materials (BOM). Based on your input, CPI Technical Support will propose a complete solution with a drawing and detailed BOM. They will take the time to explain each selection, so you have a complete understanding of how the CPI solutions will provide the desired results. Example Bill Of Materials (BOM) Item Part Number Qty Frame Supported Hot Aisle Containment (HAC) Solution 990-E0 Frame Supported Exhaust Duct, For a 0 W ( mm) 7. W (9 mm) Aisle, 0 L (.0 m), Glacier White 8-00 Aisle Containment Edge Seal, 8 L (. mm), Clear, Pack 770-E0 Aisle Containment Double Door Assembly, Glacier White with Anodized Door Frames 78-E0 Adjustable Height Filler Panel, 9U,. W (00 mm), Glacier White 8 99-E0 Full Height Blanking Panel, Glacier White 908-E00 Cabinet To Floor Front Seal Kit, For. W (00 mm) F-Series TeraFrame Gen Cabinet, Glacier White 909-E Cabinet To Floor Side Seal Kit, For 7. D (00 mm) F-Series TeraFrame Gen Cabinet frame, Glacier White Recommended Accessories 87-70 Installation Template, Aisle Containment Double Door Assembly FFU-C-E-B F-Series TeraFrame Gen Cabinet, U,. W (00 mm) x."d (00 mm), Perforated Doors, () Side Panels, Glacier White 8 9-E00 Bottom Panel For F-Series TeraFrame Gen Cabinets, Glacier White 8 908-E0 Air Dam For F-Series TeraFrame Gen Cabinets, U,. W (00 mm), Glacier White 8 7-E0 Snap-In Filler Panel, U x 9 EIA, Glacier White, Pack of 0 8-E0 Snap-In Filler Panel, U x 9 EIA, Glacier White, Pack of 0 87-00 AisleLok Acrycell Sealing Tape, W (0 mm), 8. L (. m), Pack of 7-00 KoldLok Split Integral Raised Floor Grommet,, Pack of 0 8 Notes: This example BOM is based on a solution for 8 each U,. W (00 mm) x."d (00 mm) F-Series TeraFrame Gen Cabinets. Items and are cabinet-specific. Recommended Accessories include Cabinet Thermal Management Accessories. Contact CPI Technical Support to develop a BOM for your site. For a more detailed analysis of your site, CPI offers a Pre-Installation Site Survey, a service where a CPI Technical Representative visits your site to provide a more detailed recommendation. To help ensure an optimized aisle containment installation, CPI offers On-Site Installation Supervision Services, which includes related training and examination of the initial pods. Both Pre-Installation Site Surveys and On-Site Installation Supervision Support are especially important if there are special conditions, concerns or required customization. All suggestions and performance statements are based on using an overall approach to airflow containment through the use of CPI Products and solutions. For more information about CPI s Aisle Containment Services or products, call 800-8-99, email techsupport@chatsworth.com or contact your Regional Sales Manager. All products quoted are subject to availability based on manufacturing capacity, and shipping dates should be considered estimates only. While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or omissions and reserves the right to change information and descriptions of listed services and products. Not exactly what you need? Additional products, sizes and configurations are available from CPI. Visit www.chatsworth.com or call +-800-8-99. While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or omissions and reserves the right to change information and descriptions of listed services and products. 0 Chatsworth Products, Inc. All rights reserved. Chatsworth Products, CPI, CPI Passive Cooling, econnect, MegaFrame, Saf-T-Grip, Seismic Frame, SlimFrame, TeraFrame, GlobalFrame, Cube-iT Plus, Evolution, OnTrac, QuadraRack and Velocity are federally registered trademarks of Chatsworth Products. Simply Efficient is a trademark of Chatsworth Products. All other trademarks belong to their respective companies. Rev. 0/ MKT-000-8