N11 = 100 MBH Input Aluminized Steel S13 = 125 MBH Input Stainless Steel E15 = 15 kw Electric Heat. E30 = 30 kw Electric Heat

Similar documents
SPAREPARTSCATALOG: CONNECTORS SPARE CONNECTORS KTM ART.-NR.: 3CM EN

SPARE CONNECTORS KTM 2014

CD _. _. 'p ~~M CD, CD~~~~V. C ~'* Co ~~~~~~~~~~~~- CD / X. pd.0 & CD. On 0 CDC _ C _- CD C P O ttic 2 _. OCt CD CD (IQ. q"3. 3 > n)1t.


NEW OPTIONS LISTING #

Scorciatoie da tastiera - Circad 4.09

22ND CENTURY_J1.xls Government Site Hourly Rate


Appendix 5-1: Attachment J.1 Pricing Table -1: IMS Ceiling Loaded Rates at Contractor Site

Customer Maintenance Parts List

OPAL-RT FIU User Guide.

SMF Transient Voltage Suppressor Diode Series

Tape & Reel Packaging For Surface Mount Devices. Date Code Marking:

S5-115U. Application

2-Type Series Pressurized Closures

Supplier s declaration of conformity

C E R T I F I C A T E O F C O M P L I A N C E

DETAIL SPECIFICATION SHEET

;/ *. 7 &9*R . C 2 <0* # "2 <AC (:* "' < %)V AB C. Downloaded from qjal.smtc.ac.ir at 23: on Sunday May 13th 2018

TMCH Report March February 2017

Roland AC Adapter Compatibility Guide

SIMATIC S plus TIA Portal

Projectors supported by JED T460 projector controller. July 5th 2008 Rev 2.76A release. Total count 1229

SMF5.0A thru SMBJ190CA

Excerpt from the full range of SIRIUS ACT Push Buttons and Indicator Lights siemens.com/sirius-act

. . $ 1, 67 / $<"'D $ Downloaded from at 7:31 CEST on Monday July 7th 2014 )& "* (+, -

KLIC-DI VRV PRODUCT MANUAL INTERFACE KNX DAIKIN VRV ZN1CL-KLIC-DI. Edition 4 Version 1.0

FLIGHTS TO / FROM CANADA ARE DOMESTIC

TECHNICAL GUIDE DESCRIPTION SINGLE PACKAGE GAS/ELECTRIC UNITS AND SINGLE PACKAGE AIR CONDITIONERS DM 180, 240 & E-0904

S5-115U. Application

IEC Contactors. Auxiliary Contact Blocks GENERAL

W52P1J-15-D-0060 [ ] Honeywell CN70GQ5KN00G1A40

Proactive System Check Supported Product List as of March 27, 2018

SMBJ SERIES SMB SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

SIMATIC WinAC - PROFINET/ Ethernet PROFIBUS. Windows. Time Synchronization. MATIC NET SOFTNET-S7 Lean SIMATIC NET OPC -

BẢNG GIÁ PLC SIEMENS S7-300 Áp dụng từ 01/01/ Giá chưa bao gồm thuế VAT

Industrial Wireway & Trough

TECHNICAL GUIDE DESCRIPTION SINGLE PACKAGE HEAT PUMP UNITS BA-A6 ASHRAE COMPLIANT B-0904

1953LCV1. Laser Chip. KeyFeatures. Applications. For moreinfo. Laser Chip on Submount 1064 CHP

DNSSEC Workshop. Dan York, Internet Society ICANN 53 June 2015

Segments Proofs Reference

Elmo Servo Drives. Information Sheet for Crimson v2.0. Compatible Devices. Elmo Servo Drives using SimplIQ. Verified Device BAS-3/230-3

SINGLE OR DOUBLE ACTING CYLINDERS, Ø 8 to 25 mm

SMBJ5.0 thru SMBJ188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor

UYM-UOM-UOY-UOD- UOS-UOB-UOR

Parts List, Charging Chart, Wiring Diagrams

Proactive System Check Supported Product List as of 14 April 2017

Linguistic scaffolds for policy learning. Jacob Andreas Berkeley Microsoft Semantic Machines MIT

BEC Machine Products 171 Ruth Rd Harleysville, Pa T. (215) F: (215) E:

Supported modules System 300S Version:

Specifications 36 Series Valve (Lifting Solenoid)

Aluminum Capacitors + 85 C, Miniature, Axial Lead

Universal Multiple-Octet Coded Character Set International Organization for Standardization Organisation Internationale de Normalisation

Request for Comments: 2319 April 1998 Category: Informational

Data Sheet. Omron part no. to RS stock no. cross reference. Programmable logic controllers. Flow and level control

SMBJ5.0 thru SMBJ188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor

Construction. Quality Products. Service Excellence.

POWER8 Memory Buffer Datasheet

KLIC-DI COMMERCIAL PRODUCT MANUAL INTERFACE KNX COMMERCIAL A/C UNIT ZN1CL-KLIC-DI. Edition 8 Version 1.6

GROUP. SMART SOLUTIONS FOR POWER DISTRIBUTION Industrial & Domestic. A handy guide to the Lewden everyday mainstream offer

*Market price may vary and are subject to change at any time without prior notice

sirius Switching. Protecting. Starting. SIRIUS Product Overview

Standard Interchange Protocol 3.0 Part I

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

SIMATIC S7-200 PRICE LIST

CYStech Electronics Corp.

S5-135U, S5-155U. Application

*Market price may vary and are subject to change at any time without prior notice

*Market price may vary and are subject to change at any time without prior notice

S7-400 CPU ES XJ05-0AB0 V5.2 Work memory 144KB code and 144KB of data; ms/1000 instructions; 4KB DI/O; 32 connections 1*DP/MPI;

Supplier s declaration of conformity

BẢNG GIÁ PLC SIEMENS S7-200 Áp dụng từ 01/11/ Giá chưa bao gồm thuế VAT

SMBJ SERIES Surface Mount Transient Voltage Suppressor Voltage Range 5.0 to 170 Volts 600 Watts Peak Power

PCL ISO 8859/5 Latin/Cyrillic

MODERN PANELX MODERN ENHANCED EXTEND MIX & MINGLE

(12) INTERNATIONAL APPLICATION PUBLISHED UNDER THE PATENT COOPERATION TREATY (PCT)

Parts List, Wiring Diagrams

271 Health Care Eligibility Benefit Inquiry Response Educational Guide

NEW FRAME TRACTOR MODEL

!"!#$%&'()'%*%"&' $! + + )"( $! +!* %"%, $!- &"4+ %5!%"4+)'6$76)"%8)' 9+!()"(%#)"4!+!:!: ;!#"4+ :!'! %#4)"+<" $!9!#+6)"%= 4& )#=>!

4. Specifications and Additional Information

Engineered with TIA Portal SIMATIC S Itʼs the interplay that makes the difference. siemens.com/s Answers for industry.

ENDF/B-VII.1 versus ENDFB/-VII.0: What s Different?

Forthcoming Close Approaches To The Earth

Package Dimensions. Color Year Color Month

PQ R :R3 R. &R% R0 $D R6 *9R 8 ND $ S T R

Unit 5 Triangle Congruence

Engineered with TIA Portal. Be flexible thanks to networking possibilities. Basic Controller SIMATIC S siemens.com/s7-1200

A. All equipment and materials used shall be standard components that are regularly manufactured and used in the manufacturer s system.

CIS-331 Fall 2013 Exam 1 Name: Total of 120 Points Version 1

!!!"#$%&%#'"()*+!,&()*,

WACHOVIA BANK COMMERCIAL MORTGAGE TRUST COMMERCIAL MORTGAGE PASS-THROUGH CERTIFICATES SERIES 2005-C21 A G2 27-Oct-2044 $917,453,000.

Fannie Mae REMIC Trust Distribution Summary - 02/2014

NE-4100 Series Serial Command Mode User s Guide

Downloaded from on Saturday, April 05, 2014 ' " % # 1 ^% )#-C _F % V $% : 2,L

/f) --.LL- ~/ -z- r8~~q _.r. 7~/ CODE NUMB~ /,/f/ DATE.5~ I 'CS Z.5h:; "ro-tj t.?t9k- /?,. d $r~n;p -. til O/(f dt'fc( ve'cl- WOOc/ UK?

Network Analysis. Links, nodes, trees, graphs, paths and cycles what does it all mean? Minimal spanning tree shortest route maximum flow

Downloaded from qjal.smtc.ac.ir at 5: on Friday August 17th 2018

T EERIN G S Y S T EM C O O LIN

)- -% *)&%! $%!" (!*.-1 %,-+% --)+(!1 $!& *. &% '!!-%(# 000 $! )''.(%-1 )%! )' +!!%/!+ $+%, 1&)+ ' ()$ +! +%.-! 1 ).%,/%&&! +! ) %)(!!+, '*%(#!

Transcription:

PRODUCT NOMENCLAUTRE D L -4 N07 A T A A A 1 DIGIT Model Description Options 1 D Product Category D = Air Conditioner, Single Package 2 3-5 L -4 Product Identifier Nominal Cooling Capacity MBH L = R-22 Standard Efficiency -03 = 3 Ton -05 = 5 Ton -04 = 4 Ton -A6 = 6 Ton C00 = Cooling Only S05 = 50 MBH Input Stainless Steel E05 = 5 kw Electric Heat N05 = 50 MBH Input Aluminized Steel S07 = 75 MBH Input Stainless Steel E07 = 7 kw Electric Heat 6-8 N07 Heat Type and Nominal Heating N07 = 75 MBH Input Aluminized Steel S11 = 100 MBH Input Stainless Steel E10 = 10 kw Electric Heat Capacity N11 = 100 MBH Input Aluminized Steel S13 = 125 MBH Input Stainless Steel E15 = 15 kw Electric Heat N13 = 125 MBH Input Aluminized Steel E20 = 20 kw Electric Heat E30 = 30 kw Electric Heat A = Standard Direct Drive N = Belt Drive B = Standard Direct Drive/Single Enthalpy Economizer P = Belt Drive/Single Enthalpy Economizer *Airflow D = Standard Direct Drive/Motorized Damper R = Belt Drive/Motorized Damper L = Standard Direct Drive/BAS Ready Y = Belt Drive/BAS Ready Economizer (No Economizer (No BAS Controller)/2 Pleated BAS Controller)/2 Pleated Filters 9 A Filters F = 208/230-1-60 W = 460-3-60 Voltage 10 T T = 208/230-3-60 X = 575-3-60 SEE INSTALLATION OPTIONS SECTION Installation Options 11 A BELOW SEE ADDITIONAL OPTIONS SECTION Additional Options 12-13 AA BELOW 14 1 Product Generation 1 = 1st Generation 1 2 3 4 5 DISCONNECT SWITCH FOR INSTALLATION OPTIONS Cooling Only Models A = None Gas Models 1 Phase B = 1 Electric Heat 5-10 kw Models C = 2 Electric Heat 15-30 kw Models 208/230V D = 1 & 2 Cooling Only Models E = 3 Gas Models F = 4 Electric Heat 5-20 kw Models 3 Phase G = 1 & 3 Electric Heat - 30 kw Models H = 1 & 4 All Models 460V J = 1, 2 & 3 All Models 575V K = 1, 2 & 4 Convenience Outlet (Non-Powered) L = 1, 3 & 4 Smoke Detector Supply Air M = 1, 2, 3 & 4 All Voltages All Phases Smoke Detector Return Air N = 2 & 3 Convenience Outlet (Powered) P = 2 & 4 Q = 2, 3 & 4 R = 3 & 4 S = 5 T = 1 & 5 U = 1, 3, & 5 V = 1, 4, & 5 W = 1, 3, 4, & 5 X = 3 & 5 Y = 4 & 5 Z = 3, 4, & 5

AA = None BA = Hinged Filter Door and Toolless Access Panels AB = Phase Monitor (PM) BB = PM, Hinged Filter Door and Toolless Access Panels AC = Coil Guard (CG) BC = CG, Hinged Filter Door and Toolless Access Panels AD = Dirty Filter Switch (DFS) BD = DFS, Hinged Filter Door and Toolless Access Panels AE = PM and CG BE = PM, CG, Hinged Filter Door and Toolless Access Panels AF = PM and DFS BF = PM, DFS, Hinged Filter Door and Toolless Access Panels AG = CG and DFS BG = CG, DFS, Hinged Filter Door and Toolless Access Panels AH = PM, CG and DFS BH = PM, CG, DFS, Hinged Filter Door and Toolless Access Panels AJ = SS Drain Pan BJ = SS Drain Pan, Hinged Filter Door and Toolless Access Panels AK = SS Drain Pan and PM BK = SS Drain Pan, PM, Hinged Filter Door and Toolless Access Panels AL = SS Drain Pan and CG BL = SS Drain Pan, CG, Hinged Filter Door and Toolless Access Panels AM = SS Drain Pan and DFS BM = SS Drain Pan, DFS, Hinged Filter Door and Toolless Access Panels AN = SS Drain Pan, PM, CG and DFS BN = SS Drain Pan, PM, CG, DFS, Hinged Filter Door and Toolless Access Panels AS = Bottom Condensate Drain BS = Bottom Drain Connection, Hinged Filter Door and Toolless Access Panels CA = CPC Controller, DFS and Air Proving Switch (APS) DA = CPC Controller, DFS, APS, Hinged Filter Door and Toolless Access Panels CB = CPC Controller, DFS, APS and PM DB = CPC Controller, DFS, APS, PM, Hinged Filter Door and Toolless Access Panels CC = CPC Controller, DFS, APS and CG DC = CPC Controller, DFS, APS, CG, Hinged Filter Door and Toolless Access Panels CD = CPC Controller, DFS, APS, PM and CG DD = CPC Controller, DFS, APS, PM, CG, Hinged Filter Door and Toolless Access Panels CE = CPC Controller, DFS, APS and TCC DE = CPC Controller, DFS, APS, TCC, Hinged Filter Door and Toolless Access Panels CF = CPC Controller, DFS, APS, TCC and PM DF = CPC Controller, DFS, APS, TCC, PM, Hinged Filter Door and Toolless Access Panels CG = CPC Controller, DFS, APS, TCC and CG DG = CPC Controller, DFS, APS, TCC, CG, Hinged Filter Door and Toolless Access Panels CH = CPC Controller, DFS, APS, TCC, PM and CG DH = CPC Controller, DFS, APS, TCC, PM and CG, Hinged Filter Door and Toolless Access Panels CJ = CPC Controller, DFS, APS and Technicoat Evaporator Coil (TEC) DJ = CPC Controller, DFS, APS, TEC, Hinged Filter Door and Toolless Access Panels CK = CPC Controller, DFS, APS, TEC and PM DK = CPC Controller, DFS, APS, TEC, PM, Hinged Filter Door and Toolless Access Panels CL = CPC Controller, DFS, APS, TEC and CG DL = CPC Controller, DFS, APS, TEC, CG, Hinged Filter Door and Toolless Access Panels CM = CPC Controller, DFS, APS, TEC, PM and CG DM = CPC Controller, DFS, APS, TEC, PM, CG, Hinged Filter Door and Toolless Access Panels CN = CPC Controller, DFS, APS, TEC and Technicoat Condenser Coil (TCC) DN = CPC Controller, DFS, APS, TEC, TCC, Hinged Filter Door and Toolless Access Panels CP = CPC Controller, DFS, APS, TEC, TCC and PM DP = CPC Controller, DFS, APS, TEC, TCC, PM, Hinged Filter Door and Toolless Access Panels CQ = CPC Controller, DFS, APS, TEC, TCC and CG DQ = CPC Controller, DFS, APS, TEC, TCC, CG, Hinged Filter Door and Toolless Access Panels CR = CPC Controller, DFS, APS, TEC, TCC, PM and CG DR = CPC Controller, DFS, APS, TEC, TCC, PM, CG, Hinged Filter Door and Toolless Access Panels CS = CPC Controller, DFS, APS, SS Drain Pan DS= CPC Controller, DFS, APS, SS Drain Pan, Hinged Filter Door and Toolless Access Panels CT = CPC Controller, DFS, APS, SS Drain Pan, PM and CG DT= CPC Controller, DFS, APS, SS Drain Pan, PM, CG, Hinged Filter Door and Toolless Access Panels CU = CPC Controller, DFS, APS, SS Drain Pan and TCC DU= CPC Controller, DFS, APS, SS Drain Pan, TCC, Hinged Filter Door and Toolless Access Panels CV = CPC Controller, DFS, APS, SS Drain Pan and TEC DV= CPC Controller, DFS, APS, SS Drain Pan, TEC, Hinged Filter Door and Toolless Access Panels CW = CPC Controller, DFS, APS, SS Drain Pan, TEC and TCC DW= CPC Controller, DFS, APS, SS Drain Pan, TEC, TCC, Hinged Filter Door and Toolless Access Panels CX = CPC Controller, DFS, APS, SS Drain Pan, PM, CG, TEC and TCC DX= CPC Controller, DFS, APS, SS Drain Pan, PM, CG, TEC, TCC, Hinged Filter Door and Toolless Access Panels HA = Honeywell Excel 10 Controller, DFS and APS EA = Johnson UNT Controller, DFS, APS, Hinged Filter Door and Toolless Access Panels HB = Honeywell Excel 10 Controller, DFS, APS and PM EB = Johnson UNT Controller, DFS, APS, PM, Hinged Filter Door and Toolless Access Panels HC = Honeywell Excel 10 Controller, DFS, APS and CG EC = Johnson UNT Controller, DFS, APS, CG, Hinged Filter Door and Toolless Access Panels HD = Honeywell Excel 10 Controller, DFS, APS, PM and CG ED = Johnson UNT Controller, DFS, APS, PM, CG, Hinged Filter Door and Toolless Access Panels HE = Honeywell Excel 10 Controller, DFS, APS and TCC EE = Johnson UNT Controller, DFS, APS, TCC, Hinged Filter Door and Toolless Access Panels HF = Honeywell Excel 10 Controller, DFS, APS, TCC and PM EF = Johnson UNT Controller, DFS, APS, TCC, PM, Hinged Filter Door and Toolless Access Panels HG = Honeywell Excel 10 Controller, DFS, APS, TCC and CG EG = Johnson UNT Controller, DFS, APS, TCC, CG, Hinged Filter Door and Toolless Access Panels HH = Honeywell Excel 10 Controller, DFS, APS, TCC, PM and CG EH = Johnson UNT Controller, DFS, APS, TCC, PM, CG, Hinged Filter Door and Toolless Access Panels HJ = Honeywell Excel 10 Controller, DFS, APS and TEC EJ = Johnson UNT Controller, DFS, APS, TEC, Hinged Filter Door and Toolless Access Panels HK = Honeywell Excel 10 Controller, DFS, APS, TEC and PM EK = Johnson UNT Controller, DFS, APS, TEC, PM, Hinged Filter Door and Toolless Access Panels HL = Honeywell Excel 10 Controller, DFS, APS, TEC and CG EL = Johnson UNT Controller, DFS, APS, TEC, CG, Hinged Filter Door and Toolless Access Panels HM = Honeywell Excel 10 Controller, DFS, APS, TEC, PM and CG EM = Johnson UNT Controller, DFS, APS, TEC, PM, CG, Hinged Filter Door and Toolless Access Panels

HN = Honeywell Excel 10 Controller, DFS, APS, TEC and TCC HP = Honeywell Excel 10 Controller, DFS, APS, TEC, TCC and PM HQ = Honeywell Excel 10 Controller, DFS, APS, TEC, TCC and CG HR = Honeywell Excel 10 Controller, DFS, APS, TEC, TCC, PM and CG EN = Johnson UNT Controller, DFS, APS, TEC, TCC, Hinged Filter Door and Toolless Access Panels EP = Johnson UNT Controller, DFS, APS, TEC, TCC, PM, Hinged Filter Door and Toolless Access Panels EQ = Johnson UNT Controller, DFS, APS, TEC, TCC, CG, Hinged Filter Door and Toolless Access Panels ER = Johnson UNT Controller, DFS, APS, TEC, TCC, PM, CG, Hinged Filter Door and Toolless Access Panels HS = Honeywell Excel 10 Controller, DFS, APS, SS Drain i Pan ES= Johnson UNT Controller, DFS, APS, SS Drain Pan, Hinged Filter Door and Toolless Access Panels HT = Honeywell Excel 10 Controller, DFS, APS, SS Drain Pan, PM and CG HU = Honeywell Excel 10 Controller, DFS, APS, SS Drain Pan and TCC HV = Honeywell Excel 10 Controller, DFS, APS, SS Drain Pan and TEC HW = Honeywell Excel 10 Controller, DFS, APS, SS Drain Pan, TEC and TCC HX = Honeywell Excel 10 Controller, DFS, APS, SS Drain Pan, PM, CG, TEC and TCC JA = Johnson UNT Controller, DFS and APS JB = Johnson UNT Controller, DFS, APS and PM JC = Johnson UNT Controller, DFS, APS and CG JD = Johnson UNT Controller, DFS, APS, PM and CG JE = Johnson UNT Controller, DFS, APS and TCC JF = Johnson UNT Controller, DFS, APS, TCC and PM JG = Johnson UNT Controller, DFS, APS, TCC and CG JH = Johnson UNT Controller, DFS, APS, TCC, PM and CG JJ = Johnson UNT Controller, DFS, APS and TEC JK = Johnson UNT Controller, DFS, APS, TEC and PM JL = Johnson UNT Controller, DFS, APS, TEC and CG JM = Johnson UNT Controller, DFS, APS, TEC, PM and CG JN = Johnson UNT Controller, DFS, APS, TEC and TCC JP = Johnson UNT Controller, DFS, APS, TEC, TCC and PM JQ = Johnson UNT Controller, DFS, APS, TEC, TCC and CG JR = Johnson UNT Controller, DFS, APS, TEC, TCC, PM and CG ET= Johnson UNT Controller, DFS, APS, SS Drain Pan, PM, CG, Hinged Filter Door and Toolless Access Panels EU= Johnson UNT Controller, DFS, APS, SS Drain Pan, TCC, Hinged Filter Door and Toolless Access Panels EV= Johnson UNT Controller, DFS, APS, SS Drain Pan, TEC, Hinged Filter Door and Toolless Access Panels EW= Johnson UNT Controller, DFS, APS, SS Drain Pan, TEC, TCC, Hinged Filter Door and Toolless Access Panels EX= Johnson UNT Controller, DFS, APS, SS Drain Pan, PM, CG, TEC, TCC, Hinged Filter Door and Toolless Access Panels GA = Honeywell Excel 10 Controller, DFS, APS, Hinged Filter Door and Toolless Access Panels GB = Honeywell Excel 10 Controller, DFS, APS, PM, Hinged Filter Door and Toolless Access Panels GC = Honeywell Excel 10 Controller, DFS, APS, CG, Hinged Filter Door and Toolless Access Panels GD = Honeywell Excel 10 Controller, DFS, APS, PM, CG, Hinged Filter Door and Toolless Access Panels GE = Honeywell Excel 10 Controller, DFS, APS, TCC, Hinged Filter Door and Toolless Access Panels GF = Honeywell Excel 10 Controller, DFS, APS, TCC, PM, Hinged Filter Door and Toolless Access Panels GG = Honeywell Excel 10 Controller, DFS, APS, TCC, CG, Hinged Filter Door and Toolless Access Panels GH = Honeywell Excel 10 Controller, DFS, APS, TCC, PM, CG, Hinged Filter Door and Toolless Access Panels GJ = Honeywell Excel 10 Controller, DFS, APS, TEC, Hinged Filter Door and Toolless Access Panels GK = Honeywell Excel 10 Controller, DFS, APS, TEC, PM, Hinged Filter Door and Toolless Access Panels GL = Honeywell Excel 10 Controller, DFS, APS, TEC, CG, Hinged Filter Door and Toolless Access Panels GM = Honeywell Excel 10 Controller, DFS, APS, TEC, PM, CG, Hinged Filter Door and Toolless Access Panels GN = Honeywell Excel 10 Controller, DFS, APS, TEC, TCC, Hinged Filter Door and Toolless Access Panels GP = Honeywell Excel 10 Controller, DFS, APS, TEC, TCC, PM, Hinged Filter Door and Toolless Access Panels GQ = Honeywell Excel 10 Controller, DFS, APS, TEC, TCC, CG, Hinged Filter Door and Toolless Access Panels GR = Honeywell Excel 10 Controller, DFS, APS, TEC, TCC, PM, CG, Hinged Filter Door and Toolless Access Panels JS = Johnston UNT Controller, DFS, APS, SS Drain Pan GS = Honeywell Excel 10 Controller, DFS, APS and SS Drain i Pan JT = Johnston UNT Controller, DFS, APS, SS Drain Pan, PM and CG JU= Johnston UNT Controller, DFS, APS, SS Drain Pan and TCC JV = Johnston UNT Controller, DFS, APS, SS Drain Pan and TEC JW = Johnston UNT Controller, DFS, APS, SS Drain Pan, TEC and TCC GT = Honeywell Excel 10 Controller, DFS, APS, SS Drain Pan, PM and CG GU =Honeywell Excel 10 Controller, DFS, APS, SS Drain Pan and TCC GV = Honeywell Excel 10 Controller, DFS, APS, SS Drain Pan and TEC GW =Honeywell Excel 10 Controller,DFS, APS, SS Drain Pan, TEC and TCC JX = Johnston UNT Controller, DFS, APS, SS Drain Pan, PM, CG, TEC and TCC GX = Honeywell Excel 10 Controller,DFS, APS, SS Drain Pan, PM, CG, TEC and TCC LA = Simplicity INTELLI-COMFORT Controller PA = Novar ETC-3 Controller, DFS, APS, Hinged Filter Door and Toolless Access Panels LB = Simplicity INTELLI-COMFORT Controller and PM PB = Novar ETC-3 Controller, DFS, APS, PM, Hinged Filter Door and Toolless Access Panels LC = Simplicity INTELLI-COMFORT Controller and CG PC = Novar ETC-3 Controller, DFS, APS, CG, Hinged Filter Door and Toolless Access Panels LD = Simplicity INTELLI-COMFORT Controller, PM and CG PD = Novar ETC-3 Controller, DFS, APS, PM, CG, Hinged Filter Door and Toolless Access Panels LE = Simplicity INTELLI-COMFORT Controller and TCC PE = Novar ETC-3 Controller, DFS, APS, TCC, Hinged Filter Door and Toolless Access Panels LF = Simplicity INTELLI-COMFORT Controller, TCC and PM PF = Novar ETC-3 Controller, DFS, APS, TCC, PM, Hinged Filter Door and Toolless Access Panels LG = Simplicity INTELLI-COMFORT Controller, TCC and CG PG = Novar ETC-3 Controller, DFS, APS, TCC, CG, Hinged Filter Door and Toolless Access Panels LH = Simplicity INTELLI-COMFORT Controller, TCC, PM and CG PH = Novar ETC-3 Controller, DFS, APS, TCC, PM, CG, Hinged Filter Door and Toolless Access Panels LJ = Simplicity INTELLI-COMFORT Controller and TEC PJ = Novar ETC-3 Controller, DFS, APS, TEC, Hinged Filter Door and Toolless Access Panels LK = Simplicity INTELLI-COMFORT Controller, TEC and PM PK = Novar ETC-3 Controller, DFS, APS, TEC, PM, Hinged Filter Door and Toolless Access Panels LL = Simplicity INTELLI-COMFORT Controller, TEC and CG PL = Novar ETC-3 Controller, DFS, APS, TEC, CG, Hinged Filter Door and Toolless Access Panels LM = Simplicity INTELLI-COMFORT Controller, TEC, PM and CG PM = Novar ETC-3 Controller, DFS, APS, TEC, PM, CG, Hinged Filter Door and Toolless Access Panels LN = Simplicity INTELLI-COMFORT Controller, TEC and TCC PN = Novar ETC-3 Controller, DFS, APS, TEC, TCC, Hinged Filter Door and Toolless Access Panels LP = Simplicity INTELLI-COMFORT Controller, TEC, TCC and PM PP = Novar ETC-3 Controller, DFS, APS, TEC, TCC, PM, Hinged Filter Door and Toolless Access Panels LQ = Simplicity INTELLI-COMFORT Controller, TEC, TCC and CG PQ = Novar ETC-3 Controller, DFS, APS, TEC, TCC, CG, Hinged Filter Door and Toolless Access Panels LR = Simplicity INTELLI-COMFORT Controller, TEC, TCC, PM and CG PR = Novar ETC-3 Controller, DFS, APS, TEC, TCC, PM, CG, Hinged Filter Door and Toolless Access Panels

LS = Simplicity INTELLI-COMFORT Controller and SS Drain Pan PS = Novar ETC-3 Controller, DFS, APS, SS Drain Pan, Hinged Filter Door & Toolless Access Panels LT = Simplicity INTELLI-COMFORT Controller, SS Drain Pan, PM and CG PT = Novar ETC-3 Controller, DFS, APS, SS Drain Pan, PM, CG, Hinged Filter Door & Toolless Access Panels LU = Simplicity INTELLI-COMFORT Controller, SS Drain Pan and TCC PU = Novar ETC-3 Controller, DFS, APS, SS Drain Pan, TCC, Hinged Filter Door & Toolless Access Panels LV = Simplicity INTELLI-COMFORT Controller, SS Drain Pan and TEC PV = Novar ETC-3 Controller, DFS, APS, SS Drain Pan, TEC, Hinged Filter Door & Toolless Access Panels LW = Simplicity INTELLI-COMFORT Controller, SS Drain Pan, TEC and TCC PW = Novar ETC-3, DFS, APS, SS Drain Pan, TEC, TCC, Hinged Filter Door & Toolless Access Panels LX = Simplicity INTELLI-COMFORT Controller, SS Drain Pan, PM, CG, TEC and TCC PX = Novar ETC-3, DFS, APS, SS Drain Pan, PM, CG, TEC, TCC, Hinged Filter Door & Toolless Access Panels NA = Novar ETC-3 Controller, DFS and APS QA = Simplicity INTELLI-COMFORT Controller, Hinged Filter Door and Toolless Access Panels NB = Novar ETC-3 Controller, DFS, APS and PM QB = Simplicity INTELLI-COMFORT Controller, PM, Hinged Filter Door and Toolless Access Panels NC = Novar ETC-3 Controller, DFS, APS and CG QC = Simplicity INTELLI-COMFORT Controller, CG, Hinged Filter Door and Toolless Access Panels ND = Novar ETC-3 Controller, DFS, APS, PM and CG QD = Simplicity INTELLI-COMFORT Controller, PM, CG, Hinged Filter Door and Toolless Access Panels NE = Novar ETC-3 Controller, DFS, APS and TCC QE = Simplicity INTELLI-COMFORT Controller, TCC, Hinged Filter Door and Toolless Access Panels NF = Novar ETC-3 Controller, DFS, APS, TCC and PM QF = Simplicity INTELLI-COMFORT Controller, TCC, PM, Hinged Filter Door and Toolless Access Panels NG = Novar ETC-3 Controller, DFS, APS, TCC and CG QG = Simplicity INTELLI-COMFORT Controller, TCC, CG, Hinged Filter Door and Toolless Access Panels NH = Novar ETC-3 Controller, DFS, APS, TCC, PM and CG QH = Simplicity INTELLI-COMFORT Controller, TCC, PM, CG, Hinged Filter Door and Toolless Access NJ = Novar ETC-3 Controller, DFS, APS and TEC QJ = Simplicity INTELLI-COMFORT Controller, TEC, Hinged Filter Door and Toolless Access Panels NK = Novar ETC-3 Controller, DFS, APS, TEC and PM QK = Simplicity INTELLI-COMFORT Controller, TEC, PM, Hinged Filter Door and Toolless Access Panels NL = Novar ETC-3 Controller, DFS, APS, TEC and CG QL = Simplicity INTELLI-COMFORT Controller, TEC, CG, Hinged Filter Door and Toolless Access Panels NM = Novar ETC-3 Controller, DFS, APS, TEC, PM and CG QM = Simplicity INTELLI-COMFORT Controller, TEC, PM, CG, Hinged Filter Door and Toolless Access NN = Novar ETC-3 Controller, DFS, APS, TEC and TCC QN = Simplicity INTELLI-COMFORT Controller, TEC, TCC, Hinged Filter Door and Toolless Access Panels NP = Novar ETC-3 Controller, DFS, APS, TEC, TCC and PM QP = Simplicity INTELLI-COMFORT Controller, TEC, TCC, PM, Hinged Filter Door and Toolless Access Panels NQ = Novar ETC-3 Controller, DFS, APS, TEC, TCC and CG QQ = Simplicity INTELLI-COMFORT Controller, TEC, TCC, CG, Hinged Filter Door and Toolless Access Panels NR = Novar ETC-3 Controller, DFS, APS, TEC, TCC, PM and CG QR = Simplicity INTELLI-COMFORT Controller, TEC, TCC, PM, CG, Hinged Filter Door and Toolless Access Panels NS = Novar ETC-3 Controller, DFS, APS and SS Drain Pan QS= Simplicity INTELLI-COMFORT Controller, SS Drain Pan, Hinged Filter Door and Toolless Access Panels NT = Novar ETC-3 Controller, DFS, APS, SS Drain Pan, PM and CG QT= Simplicity INTELLI-COMFORT Controller, SS Drain Pan, PM, CG, Hinged Filter Door and Toolless Access Panels NU = Novar ETC-3 Controller, DFS, APS, SS Drain Pan and TCC QU= Simplicity INTELLI-COMFORT Controller, SS Drain Pan, TCC, Hinged Filter Door and Toolless Access Panels NV = Novar ETC-3 Controller, DFS, APS, SS Drain Pan and TEC QV= Simplicity INTELLI-COMFORT Controller, SS Drain Pan, TEC, Hinged Filter Door and Toolless Access Panels NW = Novar ETC-3 Controller, DFS, APS, SS Drain Pan, TEC and TCC QW= Simplicity INTELLI-COMFORT Controller, SS Drain Pan, TEC, TCC, Hinged Filter Door and Toolless Access Panels NX = Novar ETC-3 Controller, DFS, APS, SS Drain Pan, PM, CG, TEC and TCC QX= Simplicity INTELLI-COMFORT Controller, SS Drain Pan, PM, CG, TEC, TCC, HFD & Toolless Access Panels T1 = TCC and SS Drain Pan T3 = TCC, SS Drain Pan, PM, CG and DFS T4 = TEC and SS Drain Pan T6 = TEC, SS Drain Pan, PM, CG and DFS T7 = TEC, TCC and SS Drain Pan T9 = TEC, TCC, SS Drain Pan, PM, CG and DFS TA = TCC TB = TCC and PM TC = TCC and CG TD = TCC and DFS TE = TCC, PM and CG TF = TCC, PM and DFS TG = TCC, CG and DFS TH = TCC, PM, CG and DFS TJ = TEC TK = TEC and PM TL = TEC and CG TM = TEC and DFS TN = TEC, PM and CG TP = TEC, PM and DFS U1 = TCC, SS Drain Pan, Hinged Filter Door and Toolless Access Panels U3 = TCC, SS Drain Pan, PM, CG, DFS, Hinged Filter Door and Toolless Access Panels U4 = TEC, SS Drain Pan, Hinged Filter Door and Toolless Access Panels U6 = TEC, SS Drain Pan, PM, CG, DFS, Hinged Filter Door and Toolless Access Panels U7 = TEC, TCC, SS Drain Pan, Hinged Filter Door and Toolless Access Panels U9 = TEC, TCC, SS Drain Pan, PM, CG, DFS, Hinged Filter Door and Toolless Access Panels UA = TCC, Hinged Filter Door and Toolless Access Panels UB = TCC, PM, Hinged Filter Door and Toolless Access Panels UC = TCC, CG, Hinged Filter Door and Toolless Access Panels UD = TCC, DFS, Hinged Filter Door and Toolless Access Panels UE = TCC, PM, CG, Hinged Filter Door and Toolless Access Panels UF = TCC, PM, DFS, Hinged Filter Door and Toolless Access Panels UG = TCC, CG, DFS, Hinged Filter Door and Toolless Access Panels UH = TCC, PM, CG, DFS, Hinged Filter Door and Toolless Access Panels UJ = TEC, Hinged Filter Door and Toolless Access Panels UK = TEC, PM, Hinged Filter Door and Toolless Access Panels UL = TEC, CG, Hinged Filter Door and Toolless Access Panels UM = TEC, DFS, Hinged Filter Door and Toolless Access Panels UN = TEC, PM, CG, Hinged Filter Door and Toolless Access Panels UP = TEC, PM, DFS, Hinged Filter Door and Toolless Access Panels

TQ = TEC, CG and DFS TR = TEC, PM, CG and DFS TS = TEC and TCC TT = TEC, TCC and PM UQ = TEC, CG, DFS, Hinged Filter Door and Toolless Access Panels UR = TEC, PM, CG, DFS, Hinged Filter Door and Toolless Access Panels US = TEC, TCC, Hinged Filter Door and Toolless Access Panels UT = TEC, TCC, PM, Hinged Filter Door and Toolless Access Panels TU = TEC, TCC and CG UU = TEC, TCC, CG, Hinged Filter Door and Toolless Access Panels TV = TEC, TCC and DFS TW = TCC, TEC, PM and CG TX = TEC, TCC, PM and DFS TY = TEC, TCC, CG and DFS TZ = TEC, TCC, PM, CG and DFS WA = INTELLI-COMFORT w/modlinc Controller UV = TEC, TCC, DFS, Hinged Filter Door and Toolless Access Panels UW = TEC, TCC, PM, CG, Hinged Filter Door and Toolless Access Panels UX = TEC, TCC, PM, DFS, Hinged Filter Door and Toolless Access Panels UY = TEC, TCC, CG, DFS, Hinged Filter Door and Toolless Access Panels UZ = TEC, TCC, PM, CG, DFS, Hinged Filter Door and Toolless Access Panels XA = INTELLI-COMFORT w/modlinc Controller, Hinged Filter Door and Toolless Access Panels WB = INTELLI-COMFORT w/modlinc Controller and PM XB = INTELLI-COMFORT w/modlinc Controller, PM, Hinged Filter Door and Toolless Access Panels WC = INTELLI-COMFORT w/modlinc Controller and CG WD = INTELLI-COMFORT w/modlinc Controller, PM and CG WE = INTELLI-COMFORT w/modlinc Controller and TCC WF = INTELLI-COMFORT w/modlinc Controller, TCC and PM WG = INTELLI-COMFORT w/modlinc Controller, TCC and CG WH = INTELLI-COMFORT w/modlinc Controller, TCC, PM and CG WJ = INTELLI-COMFORT w/modlinc Controller and TEC WK = INTELLI-COMFORT w/modlinc Controller, TEC and PM WL = INTELLI-COMFORT w/modlinc Controller, TEC and CG WM = INTELLI-COMFORT w/modlinc Controller, TEC, PM and CG WN = INTELLI-COMFORT w/modlinc Controller, TEC and TCC WP = INTELLI-COMFORT w/modlinc Controller, TEC, TCC and PM WQ = INTELLI-COMFORT w/modlinc Controller, TEC, TCC and CG WR = INTELLI-COMFORT w/modlinc Controller, TEC, TCC, PM and CG WS = INTELLI-COMFORT w/modlinc Controller and SS Drain Pan WT = INTELLI-COMFORT w/modlinc Controller, SS Drain Pan, PM and CG WU = INTELLI-COMFORT w/modlinc Controller, SS Drain Pan and TCC WV = INTELLI-COMFORT w/modlinc Controller, SS Drain Pan and TEC WW = INTELLI-COMFORT w/modlinc Controller, SS Drain Pan, TEC and TCC WX = INTELLI-COMFORT w/modlinc Controller, SS Drain Pan, PM, CG, TEC and TCC XC = INTELLI-COMFORT w/modlinc Controller, CG, Hinged Filter Door and Toolless Access Panels XD = INTELLI-COMFORT w/modlinc Controller, PM, CG, Hinged Filter Door and Toolless Access Panels XE = INTELLI-COMFORT w/modlinc Controller, TCC, Hinged Filter Door and Toolless Access Panels XF = INTELLI-COMFORT w/modlinc Controller, TCC, PM, Hinged Filter Door and Toolless Access Panels XG = INTELLI-COMFORT w/modlinc Controller, TCC, CG, Hinged Filter Door and Toolless Access Panels XH = INTELLI-COMFORT w/modlinc Controller, TCC, PM and CG, Hinged Filter Door and Toolless Access Panels XJ = INTELLI-COMFORT w/modlinc Controller, TEC, Hinged Filter Door and Toolless Access Panels XK = INTELLI-COMFORT w/modlinc Controller, TEC, PM, Hinged Filter Door and Toolless Access Panels XL = INTELLI-COMFORT w/modlinc Controller, TEC, CG, Hinged Filter Door and Toolless Access Panels XM = INTELLI-COMFORT w/modlinc Controller, TEC, PM, CG, Hinged Filter Door and Toolless Access Panels XN = INTELLI-COMFORT w/modlinc Controller, TEC, TCC, Hinged Filter Door and Toolless Access Panels XP = INTELLI-COMFORT w/modlinc Controller, TEC, TCC, PM, Hinged Filter Door and Toolless Access Panels XQ = INTELLI-COMFORT w/modlinc Controller, TEC, TCC, CG, Hinged Filter Door and Toolless Access Panels XR = INTELLI-COMFORT w/modlinc Controller, TEC, TCC, PM and CG, Hinged Filter Door and Toolless Access Panels XS= INTELLI-COMFORT w/modlinc Controller, SS Drain Pan, Hinged Filter Door and Toolless Access Panels XT= INTELLI-COMFORT w/modlinc Controller, SS Drain Pan, PM, CG, Hinged Filter Door and Toolless Access Panels XU= INTELLI-COMFORT w/modlinc Controller, SS Drain Pan, TCC, Hinged Filter Door and Toolless Access Panels XV= INTELLI-COMFORT w/modlinc Controller, SS Drain Pan, TEC, Hinged Filter Door and Toolless Access Panels XW= INTELLI-COMFORT w/modlinc Controller, SS Drain Pan, TEC, TCC, HFD and Toolless Access Panels XX= INTELLI-COMFORT w/modlinc Controller, SS Drain Pan, PM, CG, TEC, TCC, HFD and Toolless Access Panels