FLUORESCENT FIXTURES
J7WRAP2/32ISMV 7.5 STANDARD WRAPAROUND FIXTURE 2 x 32W, Instant Start, 120-277V, 50/60Hz, Electronic T8 Ballast, 48 in length Nominal 8" width with a shallow design Clear acrylic diffuser with prismatic bottom and ribbed linear sides Diffuser self-aligns and hinges from either side for easy maintenance Available in 48 inches (4' lengths) Standard two lamp configuration Easy re-lamping and re-ballasting Single or continuous row mounting capability Surface, stem or chain mountable Every fixture is individually tested UL listed for damp locations Model # J9WRAP2/17ISMV J9WRAP2/32ISMV 9 STANDARD WRAPAROUND FIXTURE J9WRAP2/17ISMV: 2 x 17W J9WRAP2/32ISMV: 2 x 32W Instant Start, 120-277V, 50/60Hz, Electronic T8 Ballast, from 24 48 in length Nominal 9" width with a shallow design Clear acrylic diffuser with prismatic bottom and ribbed linear sides Diffuser self-aligns and hinges from either side for easy maintenance Available in lengths from 24 to 48 inches - (2' & 4' lengths) Standard two lamp configuration Easy re-lamping and re-ballasting Single or continuous row mounting capability Surface, stem or chain mountable Every fixture is individually tested UL listed for damp locations J15WRAP4/32ISMV 15 STANDARD WRAPAROUND FIXTURE 1 4 x 32W, Instant Start, 120-277V, 50/60Hz, Electronic T8 Ballast, 48 in length Nominal 15" width with a shallow design Clear acrylic diffuser with prismatic bottom and ribbed linear sides Diffuser self-aligns and hinges from either side for easy maintenance Available in 48 inches (4' lengths) Standard four lamp configuration Easy re-lamping and re-ballasting Single or continuous row mounting capability Surface, stem or chain mountable Every fixture is individually tested UL listed for damp locations
JGT22-4/17ISMV-A12 2' X 2', 4 X 17W, 120-277V, 50/60Hz, High Power Factor, Acrylic A-12 Reflector High Performance T8 Luminaires Provides General Illumination for Recessed Applications Innovative Low-Profile Design Optimized around T8 Lamps Low Profile Electronic Ballasts and T8 Compact Sockets Integral T-bar Safety Clips are Standard no need to install separate clips UL Approved 2 X 2 LAY-IN TROFFER JGT24-4/32ISMV-A12 2' X 4', 4 X 32W, 120-277V, 50/60Hz, High Power Factor, Acrylic A-12 Reflector High Performance T8 Luminaires Provides General Illumination for Recessed Applications Innovative Low-Profile Design Optimized around T8 Lamps Low Profile Electronic Ballasts and T8 Compact Sockets Integral T-bar Safety Clips are Standard no need to install separate clips UL Approved 2 X 4 LAY-IN TROFFER JPT22-2/32U/9C UN-WIRED MODEL 2' X 2' 9-Cell Parabolic Body Only for use with 2x32W T8 or 2 x 40W T12 U-Tubes (4-T8 Sockets Included) JPT22-2/32UISMV/9C WIRED MODEL 2' X 2', 9-Cell 2 X 32W T8 U-Tubes, 120-277V, 50/60Hz, High Power Factor, (4-T8 Sockets Included) High Performance T8 Luminaire Provides General Illumination for Recessed Applications Innovative Low-Profile Design Optimized around T8 Lamps Low Profile Electronic Ballasts and T8 Compact Sockets Integral T-bar Safety Clips are Standard no need to install separate clips UL Approved 2 X 2 PARABOLIC TROFFER JPT24-3/32/18C UN-WIRED MODEL 2' X 4' 18-Cell Parabolic Body Only for use with 3x32W T8 or 3 x 40W T12 Tubes (6-T8 Sockets Included) JPT24-3/32ISMV/18C WIRED MODEL 2' X 4', 18-Cell 4 X 32W, 120-277V, 50/60Hz, High Power Factor (6-T8 Sockets Included) High Performance T8 Luminaire Provides General Illumination for Recessed Applications Innovative Low-Profile Design Optimized around T8 Lamps Low Profile Electronic Ballasts and T8 Compact Sockets Integral T-bar Safety Clips are Standard no need to install separate clips UL Approved 2 X 4 PARABOLIC TROFFER 2
1 X 4 FIXTURE 2 X 2 FIXTURE 2 X 4 FIXTURE JID14-2/32-54T5HO JID22-3/17-24T5HO JID22-3/40TT5-KIT JID24-3/32-54T5HO JID24-3/54T5HO-KIT JID14-2/32-54T5HO: JID22-3/17-24T5HO: JID22-3/40TT5-KIT: JID24-3/32-54T5HO: JID24-3/54T5HO-KIT: 1 X 4 Fixture / 2-32W T8 or 54WT5HO 2 X 2 Fixture / 2 or 3 24WT5HO, G5 Base or 17WT8 2 x 2 Fixture / 2 or 3 CF40 40W TT5, 2G11 Base 2 X 4 Fixture / 2 or 3 32W T8 or 54WT5HO 2 x 4 Fixture / 2 or 3 54WT5HO, G5 Base For use in general lighting for large spaces with high ceilings The asymmetrical styles delivers uniform vertical illumination The optimum mix of directional and diffuse reflected light produces balanced illumination Shielding pivot and swing down for easy lamp access Injection-molded plastic light traps prevent light leaks Both T8 and T5 Sockets Included JID14-2/32ISMV JID22-2/24HOPSMV JID24-2/54T5HOPSMV JID14-2/32ISMV: JID22-2/24HOPSMV: UN-WIRED MODELS WIRED MODELS 1 X 4 / 2-32W T8 Instant Start, 120-277V, 50/60Hz 2 X 2 / 2-24W T5 High Output, Pulse Start, 120-277V, 50/60Hz JID24-2/54T5HOPSMV: 2 x 4 / 2-54W T5 High Output, Pulse Start, 120-277V, 50/60Hz For use in general lighting for large spaces with high ceilings The asymmetrical styles delivers uniform vertical illumination The optimum mix of directional and diffuse reflected light produces balanced illumination Shielding pivot and swing down for easy lamp access Injection-molded plastic light traps prevent light leaks 3
J1/17-20RS120STRIP J1/32-40RS120STRIP J1/17-20RS120STRIP: J1/32-40RS120STRIP: J2/17-20RS120STRIP J2/32-40RS120STRIP J1/17-20ISMVSTRIP J1/32-40ISMVSTRIP 120V MODELS 1-Light / 17-20W, (1) F15T8 or F20T12, 120V, 50/60Hz, Rapid Start Electronic Ballast 1-Light / 32-40W, (1) F17/25/32T8 or F40T12, 120V, 50/60Hz, Rapid Start Electronic Ballast 2-Light / 17-20W, (2) F15T8 or F20T12, 120V, 50/60Hz, Rapid Start Electronic Ballast 2-Light / 32-40W, (2) F17/25/32T8 or F40T12, 120V, 50/60Hz, Rapid Start Electronic Ballast MULTI-VOLT MODELS J2/17-20RS120STRIP J2/32-40RS120STRIP J2/17-20ISMVSTRIP J2/32ISMVSTRIP J1/17-20ISMVSTRIP: 1-Light / 17-20W, (1) F15T8 or F20T12, 120-277V, 50/60Hz, Instant Start Electronic Ballast J1/32-40ISMVSTRIP: 1-Light / 32-40W, (1) F17/25/32T8 or F40T12, 120-77V, 50/60Hz, Instant Start Electronic Ballast J2/17-20ISMVSTRIP 2-Light / 17-20W, (2) F15T8 or F20T12, 120-277V, 50/60Hz, Instant Start Electronic Ballast J2/32ISMVSTRIP 2-Light / 32W, (2) F17/25/32T8 120-277V, 50/60Hz, Instant Start Electronic Ballast 1-LIGHT STRIP FIXTURE 2-LIGHT STRIP FIXTURE J2/75ISMVSTRIP J2/75ISMVSTRIP: 8FT MODELS 2-Light / 75W, (2) F96T12, 120-277V, 50/60Hz, Instant Start Electronic Ballast Housing & End Cap: CRS 0.4mm White Powder Coated Heavy-duty 20-gauge steel utilized through out for durability body and code compliance. All welded assembly and post painted for maximum operating life. Pre-treated with five-stage iron phosphate process ensures superior paint adhesion. Painted high-gloss baked white enamel. Shallow design is ideal for commercial and industrial spaces requiring general illumination. Suitable for dry and damp environments. Thermally protected, self re-setting, Class P, NPF, non-pcb and UL Listed ballast. Suitable for surface mounting. Individual or continuous row mounting. Light weight design enables easier installation and increases worker productivity. LISTING: UL / C-UL listed to US and Canadian standards. WARRANTY: Guaranteed for one year against mechanical defects. 4
JHB4/54T5HOMV JHB6/54T5HOMV 4 or 6 54WT5HO Lamps, 120-277V, 50/60Hz, Electronic Ballast and 48 (4FT Fixture) Baked white enamel coated gauge steel. Clear Lens and Sensor Mounting Options Premium full specular mirrored reflector Multiple KOs and access plate 4 point chain mount (chain sold separately) White aluminum reflector available Every fixture is individually tested UL listed for damp location APPLICATION: This series is the workhorse of our high bay fluorescent series, designed especially for high light output. The fixtures uses premium mirrored reflectors for high efficiency lighting. A sturdy/durable fixture body with superior appearance and appeal, suitable for commercial, retail and industrial applications. Mounts easily with chain or cable kit. SPECIFICATIONS: Body and ends are die blanked, pierced and formed of 22 gauge cold rolled prime steel for rigidity and uniformity. Forming of the housing has been engineered to provide added strength along its entire length. Listed by and bears UL label. JEG4-4/54T5HOMV-RA JEG4-6/54T5HOMV-RA 4FT Fixture wired for 4 or 6-54WT5HO lamps (not included), 120277V, 50/60Hz, Electronic Ballast Complete with Housing, Gear Tray, Acrylic Lens, Reflector, Hardware Easy mounting with V-hooks or cables. Appropriate for those applications that may require: Washability / hose down, Complete containment of the lamps, The ability to withstand reduced temperatures, Withstands moderate impact, Seals dust out, Reflectance of interior surfaces will not be affected by environmental contaminants, Designed for easy assembly and maintenance Compatible with reflectors up to 2.5 / 63mm deep. GEARTRAYS: Pre-painted cold rolled steel with minimum 87% total reflectance. Supported by 4 stainless steel spring fittings. Can be opened or latched from either side for easy installation and maintenance (LAMPHOLDERS SHOWN SOLD SEPARATELY) LENSES: 100% impact resistant acrylic for maximum light transmission and longevity or UV stabilized polycarbonate for temperature extremes and maximum impact resistance. The face side of the lens is glass clear to maximize efficiency and minimize distortion of reflectors intended distribution. The sides have precise lineal prisms and the ends are lightly frosted to reduce direct glare. 5
UN-WIRED MODELS JEG217CU JEG232CU 2 & 4-FT Enclosed & Gasketed Vapor Proof Fixture [Polycarbonate Diffuser] Polycarbonate Body Polycarbonate Lens Poured Neoprene Gasketing Gear Tray Included T8 Sockets included IP65 Rated Clips Included APPLICATIONS: Outdoor Weatherproof Fluorescent Lighting Can be used with Rapid Start, Preheat, or Electronic Ballast UN-WIRED MODELS JEG217ISMV JEG232ISMV JEG217ISMV: Wired for 2 x 17W T8 120-277V JEG232ISMV: Wired for 2 x 32W T8 120-277V 2 or 4-FT Enclosed & Gasketed Vapor Proof Fixture [Polycarbonate Diffuser] Polycarbonate Body Polycarbonate Lens Poured Neoprene Gasketing Gear Tray Included T8 Sockets included IP65 Rated Clips Included APPLICATIONS: Outdoor Weatherproof Fluorescent Lighting 6
Jademar Corporation 12950 NW 25th Street Suite 300 Miami, FL 33182 T: 305.640.0465 F: 305.640.0468 Email: info@jademar.com Web: www.jademar.com