INSTRUCTION MANUAL Mini HD Clock DVR with Back LCD Screen SB-CC5210 Revised: NOVEMBER 22, 2013 Thank you for purchasing from SafetyBasement.com! We appreciate your business. We made this simple manual to help you enjoy your new product as quickly and easily as possible. Be sure to check the TECH SUPPORT tab on your product page at SafetyBasement.com for the latest available manual.
PRODUCT REFERENCE Multi Function clock DVR Wall adapter Remote controller Power adapter/charger Page 2
INSTALLING SD CARD Please ensure that SD card is properly inserted. Read this section fully and carefully! RIGHT WAY! WRONG WAY! Push SD card all the way until you hear a click and SD card disappears inside. Push all the way in and release. It will CLICK in and stay Fully inserted Page 3
16GB Pathfinder IR Watch : SB-WR9800 BEFORE YOU START - CHARGING Please use reference above to charge your device via computer or wall outlet. Hint. Wall outlet will charge faster. 1. Please charge for 4-6 hours (or overnight the very first time) USB charging and download port TURNING SYSTEM ON After charging, turn the system on by turning system switch at bottom to ON position. System switch (DV) to ON Page 4
16GB Pathfinder IR Watch : SB-WR9800 CLOCK TIME ADJUSTMENT Press and release the SET button. The numbers on the screen will begin to flash. Start by pressing the HR button. Each press will change the number. Keep pressing until you get to your current hour. NOTE: The time is in military time (24 hour clock). Once you get your desired number, press SET again to move to minutes. Correct that. Then SET again. This time it will take you to ALARM settings. If you dont need to use the alarm then just continue to press set until the numbers stop flashing. You are done setting time. ue until you have changed the date and time. Page 5
16GB Pathfinder IR Watch : SB-WR9800 TIME & DATE STAMP ADJUSTMENT After adjusting clock, we now recommend that you also adjust the TIME & DATE STAMP, which appears in the video itself. This allows you to know when a video feed was taken. Page 6
BEFORE YOU START - TIME STAMP Now, use Windows Explorer (the file explorer, not the internet browser), or the Mac Finder to locate your watch. When you plugged it in, your computer automatically connected to it. In this example in Windows, the DVR appears as REMOVABLE DISK E: Your removable disk letter will vary. Keep in mind what the location is for the next step. Your DVR (drive letter may vary) From the TECH SUPPORT tab of your Product Page... Right-click on the TIME.TXT file and choose SAVE LINK AS or SAVE TARGET AS. You are going to SAVE the TIME.TXT file to your watch. See photo for proper location. Do not change the file name, it must be TIME.TXT. Page 7
5 TIME FILE Your DVR (drive letter may vary) The TIME.TXT file in proper location Save the TIME.TXT to the location shown. Depending on the unit you bought, some might show a DCIM folder, others just VIDEO, or a combination of VIDEO, AUDIO, PHOTO or there might be no folder. Just save the time.txt file in that section. Please note: some computers may not show the.txt of the file name. This is normal. Page 8
SET THE TIMESTAMP DOUBLE-CLICK (left button) on the TIME.TXT file on your watch. A text editor window will appear. Please adjust the year, month, day, hours, minutes and seconds to your current date and time. Very important that you maintain the format. If you change it by accident, please return it to original format, or just re-save time file if you dont remember! Also note the use of a 24 hour clock format. In above example we have: November 01, 2013 at 11:59 am and 59 seconds. 2013(period)11(period)01(SPACE)11(colon)59(colon)59 When complete, SAVE this file and exit your text editor and unplug your watch. The next time you turn on your HOOK DVR, the time file will be absorbed and time adjusted. NOTE: At this point, we highly recommend you do a test video to make sure time stamp was successful. Page 9
RECORDING VIDEO IR Sensor Indicator lights POWER ON/OFF Begin by (firmly) pressing POWER button on the remote. Please make sure you point it to the IR sensor. Blue light will turn on. You are now in STANDBY MODE Press VIDEO RECORD button once. Blue light will flash 3 times then go off. You are now recording video. To stop video recording press same button again (firmly). Light will return to steady blue. Repeat as necessary. MOTION DETECTION VIDEO: You can record video only when there is motion. To do that, use MOTION DETECTION button t ostart and stp video recording under the motion detection mode. PHOTO MOTION DETECTION Video record Video record START/STOP Audio record START/STOP Page 10
AUDIO ONLY RECORDING Start by having unit in STANDBY mode 1. Press and release the audio record button. Blue light will blink ONCe and turn of. You are now recording audio. 2. To stop audio recording, firmly press and release audio record button. Light will return to steady blue. This unit has great audio quality at: 192kbps POWER ON/OFF MOTION DETECTION Video record PHOTO PHOTO Video record START/STOP 1. While in standby mode, Press and release PHOTO button. 2.Blue light will turn off. You jsut took a photo. Blue light will not return to blue. You will need to press POWER button back up again. Then repeat process. Audio record START/STOP Page 11
16GB Pathfinder IR Watch : SB-WR9800 RETRIEVING YOUR FILES This unit allows you to retrieve your files without having to remove your SD card, although removing the SD card and plugging direct to computer is the easiest way! METHOD ONE: (Removing SD card) 1. Make sure nothing is being recorded. Stop all recordings and turn unit off 2. Remove SD card (press in and release. Card will spring out. pull it out) 3. Insert Micro SD card into adapter (or card reader) and plug into your computer 4. Open appropriate folder and find file and playback METHOD TWO: (Playback on DVR) 1. Turn to back of unit and press and release the POWER button The screen will turn on. 2. Press and hold PLAY button for about 2 seconds. Screen will switch to the files on SD card. 3. Use the PREVIOUS or NEXT buttons to move between files (AUDIO, VIDEO and/or PHO- TO, dpending and which and how many files you have recorded). 4. Once you are on the file you want, press PLAY to play that files. Repeat process for other files ON/OFF PLAY VIDEO/ PREVIOUS PHOTO/ NEXT Page 12
RETRIEVING YOUR FILES To view your videos and photos, and to listen to your audio recordings, you will need to copy them to your PC first. You may listen to them directly from your DVR, however it may be choppy. Make sure you have turned off the DVR before plugging into computer, to avoid potentially losing files. Now connect your USB to HOOK DVR and other end to computer USB port. After a few moments, you can access the files on your HOOK DVR. Your DVR (drive letter may vary) You may go into the folders noted above to view and copy your files. You may also delete files from these folders. NOTE: Mac users must empty their trash before disconnecting your watch after deleting files. Page 13
SUGGESTED SOFTWARE Your Windows PC or Mac has built-in software that will play most of the files created by devices like yours. However, if you are having problems playing your files, or need more options, please download and try these programs. This software is free and can be downloaded directly from the links below. You can find support and tutorials for these programs on their respective websites. SafetyBasement can not provide software support for these programs As with ANY files you download from the internet, be sure to scan them for viruses using your particular virus scanner. While most users report no issues using this software, we can not be responsible for any damage caused by this software. Please proceed carefully. Back up your PC before installing any new software. VIDEO PLAYBACK - VLC (http://www.videolan.org/vlc/index.html) The VLC Media Player can play almost any video or audio file type. There is a version for Windows and for Mac OS X. VIDEO EDITING for WINDOWS - MOVIE MAKER 2012 (http://windows.microsoft.com/en-us/windows/get-movie-makerdownload) Movie Maker is a simple video editing program from Microsoft. Please go to this link, and choose the download for your version of Windows. Please note: Movie Maker is part of the Windows Essentials package. VIDEO EDITING for MAC OS X - imovie (Visit the Apple Mac App Store for latest version) imovie is a simple video editing program from Apple. It comes installed with your new Mac. The latest version is also available at the Mac App Store at additional cost. AUDIO PLAYBACK and EDITING - AUDACITY (http://audacity.sourceforge.net/) Audacity is a popular audio editing program used by amateurs and professionals to edit simple and complex audio projects. You can use Audacity to convert your audio files to another format, such as MP3. There is a version for Windows and Mac OS X. PHOTOS Your Windows and Mac computers have the ability to do basic editing of photos built in. Page 14
DEVICE SPECIFICATIONS Audio Formats Audio Encoding WAV 192 Kbps Audio WAV Bit Rate Mode WAV Bit Rate WAV Sampling Rate Constant 192 Kbps 16 Hz Video Video Format.AVI Codec MJPG Bit Rate 29.8 Mbps Resolution 720x480 pixels (16:9) Frame Rate 30 fps Audio Format Bit Rate Mode Bit Rate WAV Constant 192Kbps Photo Format Resolution JPG 1600x1000 pixel Photo Page 15
DEVICE SPECIFICATIONS Device Info Memory Built In Memory Expansion Battery Type Charger N/A 2GB - 32GB Internal Rechargeable for camera via USB port or included adapter Please check our site for the latest available manual for this product. Notes File sizes shown are approximate. Video (10 min) 1 GB File Sizes Audio (10 min) 9 MB Photo 780 KB Page 16