USER MANUAL MULTIMEDIA LED PROJECTOR Please read this user manual carefully before using your unit.
CONTENTS Contents...1 Caution... 2 What's in the box...3 Product Introduction...4 Remote Control Introduction...5 How To Use The Remote Control And Connect To Other Equipment...6 How to use the projector...7 How to extend the projector to be the second screen to PC...8 Main Menu Introduction...9-14 Troubleshooting...15 Specification...16-1-
CAUTION Do not look into the lens, while the projector is in operation. Do not cover or block vents of the projector. Do not use the projector under extremely hot, cold and high humidity condition. No user serviceable parts. Do not use the projector at dusty and dirty places. Unplug the projector if you are not going to use it for a while.! Note: If you want to unplug the projector, please at least leave 30 seconds cooling time after the power being turned off. -2-
POWER OFF 1 2 3 4 WHAT'S IN THE BOX CHECKING ON THE ACCESSORIES Note: the appearances of accessories may vary from country to country, please refer to the actual items in the box. Yellow White Red Projector Remote Control (one piece of CR2025 Lithium battery is included) RCA AV Cable Sucker This sucker is a free gift. It can be used with any mini tripod USB Cable Adapter Sucker User Manual User Manual -3-
PRODUCT INTRODUCTION FRONT VIEW REAR VIEW 1 2 4 3 5 6 7 TOP VIEW 13 12 11 10 9 8-4- 1. Lens 2. Speaker 3. RESET 14 15 16 17 4. Power: Hold the button for three seconds to turn on/off the projector 5. Power-saving button 6. USB port: connects USB equipment 7. Micro SD card slot 8. Direction Keys (a) Move the cursor up (b) Go previous track when playing video (a) Move the cursor down (b) Go next track when playing video (a) Move the cursor left (b) When playing music, use the button to choose function operation or go fast backward when playing video (a) Move the cursor right (b) When playing music, use the button to choose function operation or go fast forward when playing video 9. OK: Confirm/play 10. RETURN: To exit the current mode or return to the previous 11. MENU: Return to main menu 12. SOURCE: To switch between external AV signal mode and internal signal mode 13. Power indicator 14. IR receiver 15. Mini USB port: Connects to PC, Notebook etc 16. Earphone socket 17. AV IN: connects to DVD player, STB etc
REMOTE CONTROL INTRODUCTION POWER OFF 1 2 4 3 7 14 16 10 8 9 5 6 12 15 13 11 ITEM NAME FUNCTION POWER OFF SOURCE PHOTO MUSIC VIDEO SETUP DOCUMENT MENU RETURN -5- VOL- VOL+ Turn off the projector To switch between internal signal mode and external AV signal mode To enter the photo browsing interface directly To enter music list interface directly To enter video list interface directly To enter setup menu To enter document list interface directly Return to main menu To exit the current mode or return to the previous Decrease the volume Increase the volume (a) move the cursor up (b) go t o the previous track when playing video file (a) move the cursor down (b) go to the next track when playing video file (a) move the cursor left (b) when playing music, use the button to choose function operation or go fast backward when playing video (a) move the cursor right (b) when playing music, use the button to choose function operation or go fast forward when playing video 16 Confirm/pause/play
POWER OFF HOW TO USE THE REMOTE CONTROL AND CONNECT TO OTHER EQUIPMENT REMOTE CONTROL BATTERY INSTALLATION Battery battery cover mobile phone Coin The outer audio/video epuipment Note Figure 1 Figure 2 Figure 3 Please use 3V CR2025 lithium battery or the same type battery which manufacturer recommends. Do not dispose the used battery in fire, otherwise, it may cause an explosion. If the battery is dead or you do not use the remote control for a long time, please take out the battery to prevent battery leakage in the compartment. OPERATION RANGE For an effective operation, please point the remote control to the IR sensor at the back of the projector. The maximum signal working range is shown as below: Note: When connecting to other equipment, the volume is controlled by outer equipment. Connecting USB drive Insert the USB drive into the USB socket at the back of projector. Connecting Micro SD card Insert the Micro SD card into the Micro SD card slot on the left side of the projector. Micro SD CONNECTING TO OTHER EQUIPMENT Connecting AV equipment Use RCA AV cable to input the audio/video signal from other equipment to the projector. Press SOURCE on the remote control to switch to AV channel after being connected correctly. -6- Connecting computer Connecting computer as per the following image shown. Mini USB USB USB adapter
HOW TO USE THE PROJECTOR 1. Connect power supply 3. Place the projector and align it with the screen 2. Turn on video equipment and projector Press and hold the button for 3 seconds to turn on the projector. 4. Adjust the focus Lens adjusting knob: turn the knob to adjust the focus to make the image clear. -7-
HOW TO EXTEND THE PROJECTOR TO BE THE SECOND SCREEN TO PC SUB DISPLAY FUNCTION EzDisplay is a PC software, which is easy to operate and can extend the projector to be a second screen to PC. Install and Drive The Application Turn on the projector, use USB adapter to connect computer and the unit. Select My Computer. Please open the removable disk Ezdisplay". Double click "Ezdisplay-xxx.exe" to pop-up Setup Wizard, and then follow the prompts to install, please restart the computer after the installation is done. Note: Before the driver installation, please turn on the projector and connect the unit with com puter c orrectly to allow the projector detecting the connection of other equipment and start the installation of the driver automatically; otherwise, you need to install the driver manually. Do not insert the USB device and Mini USB into the unit at the same time. Ez Display Application Configuration On the Desktop, click the right button of mouse to select Display Properties Setting select "(default monitor)"on EZ Display from Display (D), as per the right image shown. After "EZ Display's (default monitor)" is selected, tick off "Extend the desktop of Windows to the mo nitor option, and then click confirm" and "applications", save and exit. Ez Display Program Application Run the application: click Start Application EzDisplay Ez Display. -8- Full Screen Mirror: Extend the monitor to the projector directly, the display output is 1024x768 Compatibility Mode: Extend the display to projector and switch display output to be 640 x 480. Exit: Exit the application Display status: after the application has run, the shortcut icon appears on the right corner of the tool bar, as the image shown on the right. Double click the shortcut icon on the tool bar to display EZ Display Control Window. Use the right button of mouse to click the icon to display the Control Window. Disconnected Connected
INTERNAL Micro SD MAIN MENU INTRODUCTION VIEWING PHOTOS 1. Use / to choose USB device, Micro SD card or internal memory. 2. Use / to select Photo, press OK to enter p hoto playing list, or press PHOTO to enter directly. 4. Press OK to enter photo browsing mode PHOTO MUSUIC VIDEO DOCUMENT SETTING 3. Use / to select your desired p hoto. FILE Rotate 0 90 180 270 You can use / to select the function, and then press OK to operate. OSD function menu explains as below. previous Full-screen display Copy Exit -9- Zoom 0 1 2 3 4 Next Delete Photo information Viewing Slideshow After entering the full-screen display mode, the unit starts the slideshow as per the set duration of each photo. 5. Press RETURN exit the current mode or return to the previous.
PHOTO MUSUIC VIDEO INTERNAL Micro SD MAIN MENU INTRODUCTION PLAYING MUSIC 1. Use / to choose USB device, Micro SD card or internal memory. 2. Use / to select Music, press OK to enter music playing list, or press MUSIC to enter directly. You can use / to select the function, and then press OK to operate. OSD function menu explains as below. VOLUME - Fast backward Fast forward A VOLUME+ Play Pause Repeat all Repeat one Random 4. Press RETURN exit the current mode or return to the previous. DOCUMENT SETTING FILE 3. Use / to select your desired music, press OK to play. Music 1 Michal Jackson BEYOND MariahCarey BarbieGirl Miss You Finally Forever Love -10-
PHOTO MUSUIC VIDEO INTERNAL Micro SD MAIN MENU INTRODUCTION PLAYING VIDEO 1. Use / to choose USB device, Micro SD card or internal memory. 2. Use / to select Video, press OK to enter video playing list, or press VIDEO to enter directly. 4. Press OK to view full-screen. DOCUMENT SETTING FILE Projector Remote control 3. Use / to select your desired video. Video 1 5 [640x480]StarCraft2Ci [640x480]dragon.AVI 9 2 5 6 4 1 3 1 9 6 4 2 3 5 7 8 [800x600]Teacher.AVI [640x480]Superman.A [800x600]Big bowl.avi -11-1 2 3 4 5 6 7 8 OK RETURN Confirm/pause/play Go fast backward Go fast forward Go to the previous video play Go to the next video play Exit current mode or return to the previous Volume - Volume+ 9 MENU Return to main menu
INTERNAL Micro CARD SD MAIN MENU INTRODUCTION READING DOCUMENT 1. Use / to choose USB device, Micro SD card or internal memory. 2. Use / to select DOCUMENT, press OK to enter DOCUMENT playing list, or press DOCUMENT to enter directly. 1 2 3 4 5 OK RETURN Select / confirm exit the current mode or return to the previous Hold the button down for a few seconds to zoom out on the page, press the button to move the page left Hold the button down for a few seconds to zoom in on the page, press the button to move the page right Hold the button down for a few seconds to go fast backward, press the button to go previous PHOTO MUSUIC VIDEO 6 Hold the button down for a few seconds to go fast forward, press the button to go next DOCUMENT SETTING 3. Use / to select your desired DOCUMENT, p ress OK to play. FILE 4. Press RETURN to exit current mode or return to the previous. Document AllBooks 2 6 BarbieGirl.txt SilentNight.txt Twins.txt Say forever.txt Big World.txt Feeling.txt -12-
INTERNAL Micro CARD SD MAIN MENU INTRODUCTION SYSTEM SETUP 1. Use / to select SETTING, press OK to enter setting playing list, or press SETTING to enter directly. PHOTO MUSUIC VIDEO DOCUMENT SETTING 2. Use / to select the sub-menu, press OK to enter setting System Setup Photo Setup Calendar Video Setup Setup Video Music Setup Music Setup FILE Language Version Set Default System Setup Item Function Setting value Language Setting display language English/Japanese/Simplified Chinese/Traditional Chinese /Spanish Version Set Default Display version information Restore factory setting Display software version information ON/OFF Photo Setup Item Function Setting value Background Music Setting the background music ON/OFF Display ratio Setting display ratio Original /Full Screen Slide show Duration Video Setup Music Setup Setting the duration of each photo 3 Sec./5 Sec./10 S ec/ 15 S e c/20 Se c Item Function Setting value Display ratio Setting display ratio Original / Auto Zoom / Full Screen Repeat mode Setting playing mode Sequence / Random / Single Item Function Setting value Repeat mode Setting playing mode Sequence / Random / Single 4. Press RETURN exit the current mode or return to the previous. 3. After entering the desired sub-menu, use / to set the value, press OK to confirm and exit. -13-
INTERNAL Micro CARD SD MAIN MENU INTRODUCTION FILE MANAGEMENT 1. Use / to choose USB device, Micro SD card or internal memory. 2. Use / to select File, press OK to enter file playing list. 4. Press to go to the center information area, press OK to delete or copy. Copy PHOTO MUSUIC VIDEO DOCUMENT SETTING FILE 5. Press RETURN exit the current mode or return to the previous. 3. Use / to select your desired file. -14-
TROUBLESHOOTING Make sure the unit is connected to video equipment or computer correctly. Make sure all equipment is connected to the outlet and the power is on. Make sure the unit is operated within the operation temperature. No image appears when operating the unit with computer, please restart the computer. Problems No display No image Possible Solutions 1. Check if the power cord of projector is connected to the outlet correctly. 2. Check if the power is turned on. 1. Check if the unit is connected to video equipment and computer. 2. Check if the unit is switched to the correct channel. 3. Check if the input signal from computer is correct (The computer's resolution is usually set to be 1024 x768, refresh rate 60Hz). 4. When connecting with portable computer, you usually need to change the output setting of the monitor. No sound 1. Check if the audio cable is connected. 2. Adjust audio source. 3. Adjust the volume of projector. No photos display while USB device has been inserted No video while memory card or USB stick has been inserted Remote control doesn't work 1. Remove and insert the USB or internal memory and make sure they are inserted in the place properly or check if there are photos stored in USB or internal memory. 2. Check if photo function is turned on in USB using format. 3. Make sure the photo files are in correct format. Note: You may use Microsoft Paint program to display the wrong-format image and save the image in correct format before displaying on this Frame. 1. Remove and insert the USB or internal memory and make sure they are inserted in the place properly, or check if there are correct video files in the memory card/usb. 2. Check if the unit is switched to the correct channel and the video function is turned on. 1. Install new batteries. 2. Make sure there are no obstacles between you and the projector. 3. Make sure the remote control is within the operating range. -15-
SPECIFICATIONS Item Dimension Weight Resolution Adapter Total power Battery life Brightness Audio / Video input Audio output The best projection distance/dimension Supported outer equipment Memory capacity Readable memory card Operation temperature Storage temperature Photo format 122x69.5x13mm 140g 640 x 480 Pixels Input: 100-240V~ 50/60Hz Output: DC 5V/1.5A <15W 60 Min Full 25LM / Half 16LM USB x 1 MINI USB x 1 AV Interface Micro SD card Built-in speaker, earphone 2.03M/80 USB device, PC, Micro SD card 4GB SD/TF (the max. is 32G) Temperature 5 35 Humidity 20 80% Temperature -10 35 Humidity 10 95% JPG, BMP Specification 317-09-V01-16-