Data Bulletin 0
Introduction or Introduction of the product range The RXM miniature relay range includes: A relays with C/O contacts, 0 A relays with C/O contacts, A relays with C/O contacts and A low level relays with C/O contacts. All these relays have the same dimensions. Sockets with mixed or separate contact terminals. Protection modules (diode, RC circuit or varistor). Metal hold-down clip for all sockets. Plastic hold-down ejector clip for all sockets. -pole bus jumper that can be used on sockets with separate contact terminals in order to simplify wiring when creating a jumper between the coil terminals. Clip-in ID tags for all the sockets except RXZEM. 0 Relay description Spring return push-to-test button for checking contact operation (green: DC coil, red: AC coil). Mechanical relay status indicator. Optional removable lock-down door enables continuous engagement of the contacts for test or maintenance purposes. During normal operation, this lock-down door must always be in the closed position. Bipolar LED indicating the relay status. Removable ID tag for relay identification. our notches for DIN rail mounting adapter or panel mounting adapter with mounting lugs. Eight, eleven or fourteen quick-connect pins. inger grips for easy removal of the relay from a socket. Mounting adapter for direct mounting of the relay on a panel. 0 Mounting adapter for direct mounting of the relay on a DIN rail. Outputs Socket description Sockets with mixed contact terminals () Connection by screw clamp terminals or box lug connector. ourteen female contacts for the relay pins. Location for protection modules. Locking components for plastic and metal hold-down clips. Locating slot for mounting on DIN rail. Two or four mounting holes for panel mounting. Inputs Relay coil terminals Inputs Outputs Sockets with separate contact terminals () Connection by screw connector. Connection by push-in spring clamp terminals. No tool is required to insert the cable. Eight, eleven or fourteen female contacts for the relay pins. Location for protection modules. Locking components for plastic and metal hold-down clips. Locating slot for mounting on DIN rail. Two mounting holes for panel mounting. Location for bus jumpers (see Mounting on Sockets section on www.schneider-electric.com). Location for clip-in ID tag. Relay coil terminals () The inputs are mixed with the relay coil terminals, with the outputs being located on the opposite side of the socket. () The inputs and outputs are separated from the relay coil terminals. page page page page page
General specifications Conforming to standards IEC/EN 0-, UL 0, CSA C- n Product certifications Ambient air temperature around the device Vibration resistance conforming to IEC/EN 00-- Degree of protection Shock resistance conforming to IEC/EN 00-- Protection category Mounting position culus ile E CCN NLDX, NLDX; curus ile E CCN NLDX, NLDX; CSA; CE; Lloyds Register; GOST; RoHS compliant Storage C () - 0 + (-0... +) Operation C () - 0 + (-0... +) In operation gn (...0 Hz), +/- (0... Hz) with and without retention clip Not operating gn (...0 Hz), +/- (0... Hz) with and without retention clip Conforming to IEC/EN 0 In operation Not operating IP 0 0 gn ( ms) with retention clip 0 gn ( ms) with retention clip RT I Any Insulation specifications Rated insulation voltage (Ui) V 0 (IEC), 00 (UL, CSA) Rated impulse withstand voltage (Uimp) kv (./0 ms) for RXM ppppp and RXM ppppp;. (./0 ms) for RXM ppppp Dielectric strength (rms voltage) Between coil/contact Vac 000 Between poles Vac 000 Between contacts Vac 00 Contact specifications Relay type RXM ABppp RXM ABppp RXM ABppp RXM GBppp Number and type of contacts C/O C/O C/O C/O low level Contact materials Ag alloy with Au flash Ag with Au flash - bifurcated Conventional thermal current (Ith) Rated operational current in utilization categories AC- and DC- or ambient temperature y C Conforming to IEC A 0 N.O. 0 N.C. Switching current Minimum ma 0 Switching voltage Maximum V 0 Vac / Vdc (IEC); 00 Vac / 0 Vdc (UL) Minimum V Vdc Vdc Nominal load A at 0 Vac (00K cycles) 0 at 0 Vac (00K cycles) at 0 Vac (00K cycles) at 0 Vac (00K cycles)() (conforming to IEC, resistive, 00K cycles) A at Vdc (00K cycles) 0 at Vdc (00K cycles) at Vdc (00K cycles) at Vdc (00K cycles)() Rated operational current (conforming to UL) Resistive A at Vac (00K cycles) 0 at Vac (00K cycles) at Vac (00K cycles) at Vac (00K cycles)() A at 0 Vac (00K cycles) 0 at 0 Vac (00K cycles) at 0 Vac (00K cycles) at 0 Vdc (00K cycles)() A at 0 Vdc (00K cycles) 0 at 0 Vdc (00K cycles) at 0 Vdc (00K cycles) at 0 Vdc (00K cycles)() Motor hp / at 0 Vac (K cycles) / at 0 Vac (K cycles) / at 0 Vac (K cycles) / at 0 Vac (K cycles)() hp at Vac (K cycles) at Vac (K cycles) / at Vac (K cycles). A LA at 0 Vac Pilot Duty B00 B00 B00 A make, 0. A break, A continuous at 0 Vac() Switching capacity Maximum AC VA 000 00 00 0 DC W 0 Minimum mw 0 Maximum operating rate No-load 000 In operating cycles per hour Under load 00 Utilization coefficient 0 % Mechanical durability Cycles 0 000 000 () When mounted horizontally Electrical durability of contacts Resistive load (AC) Durability (Number of operating cycles) 0 0 D A B C 0 0 Switching capacity (kva) Reduction coefficient for inductive load (AC) (depending on power factor cos j) Reduction coefficient (A) 0, 0, 0, 0, 0, 0, 0, 0, Maximum switching capacity on resistive load (DC) Current c 0 D C 0, 0 0 00 0 00 0 Voltage (Vdc) A B A RXM ABppp B RXM ABppp C RXM ABppp D RXM GBppp Durability (inductive load) = durability (resistive load) x reduction coefficient. page page page page page
(continued) Coil specifications Average consumption AC VA 0.. DC W 0.. Drop-out voltage threshold AC u 0. Uc Operating time (response time) Between coil energization and making of the On-delay contact Between coil de-energization and making of the Off-delay contact DC u 0. Uc AC ms 0 (max.) DC ms 0 (max.) AC ms 0 (max.) DC ms 0 (max.) Control circuit voltage Uc V 0 0 0 0 0 Relay control voltage codes JD BD ED D GD MD DC supply Average resistance at 0 C ± 0% W 0 0 0 0 0 00 Operating voltage limits M Vac... 00 Max. Vac... Relay control voltage codes B E P U AC supply Average resistance at 0 C ± % W 0 0 0 0 Operating voltage limits M Vdc.. Max. Vdc.. Socket specifications Socket type RXZES0M RXZESM RXZESM RXZESS RXZEMM RXZEM Relay types used RXMppppp RXMppppp RXMppppp RXMppppp RXMppppp Contact terminal arrangement Separate Mixed Wire connection method Box lug connectors Spring clamp terminals Product certifications RXMppppp () RXMppppp RXMppppp () RXMppppp Box lug connectors Screw clamp terminals curus ile E CCN SWIV, SWIV; CSA; CE; GOST; Lloyds; RoHS compliant Conforming to standards IEC, UL 0, CSA. No. Electrical specifications Conventional thermal current (Ith) A 0 (-Pole), (-Pole) Maximum operating voltage Vac 0 (IEC) Insulation specifications Between adjacent output contacts Vrms 00 Between input and output contacts Vrms 00 Between contacts and DIN rail Vrms 00 General specifications Ambient air temperature around the device Operation C ( ) - 0 + 0 (- 0 + 0) Storage C ( ) - 0 + (- 0 + ) Degree of protection Conforming to IEC/EN IP 0 0 Connection Solid wire conductor 0.. - AWG 0 AWG 0.. 0.. 0.. without AWG 0 AWG AWG 0 AWG AWG 0 AWG cable end conductors 0.. - AWG 0 AWG lexible conductor 0.. - AWG AWG 0.. 0.. 0. wire with AWG 0 AWG AWG AWG AWG AWG cable end conductors 0. - AWG AWG 0.. AWG 0 AWG 0. - AWG AWG Maximum tightening torque / Screw size Nm / M screw Mounting On DIN rail / on panel Mounting on DIN rail By plastic clip By metal By plastic clip compression spring Terminal referencing IEC, NEMA Bus jumper (Ith: A) Yes No Compatibility with the plastic hold-down Yes ejector clip Compatibility with the metal hold-down clip Yes Protection module compatibility All RXM00W, RXM0pp, RXM0pp Clip-in ID tag compatibility Yes (see page for more information) No Wire connection method Screw connector Spring clamp terminals 0 Screw connector Screw clamp terminals () When mounting relay RXMppppp on socket RXZEMpppp, the thermal current must not exceed 0A.
References RXMABBD RXMAB Miniature relays with lockable test button only (sold in lots of 0) Control circuit voltage Number and type of contacts - Thermal current (Ith) C/O - A C/O - 0 A C/O - A Unit Weight Unit Weight Unit Weight V kg (lb) kg (lb) kg (lb) Vdc RXMABJD 0.0 (0.0) RXMABJD 0.0 (0.0) RXMABJD 0.0 (0.0) Vdc RXMABBD 0.0 (0.0) RXMABBD 0.0 (0.0) RXMABBD 0.0 (0.0) Vdc RXMABED 0.0 (0.0) RXMABED 0.0 (0.0) RXMABED 0.0 (0.0) 0 Vdc RXMABD 0.0 (0.0) RXMABD 0.0 (0.0) RXMABD 0.0 (0.0) 0 Vdc RXMABMD 0.0 (0.0) Vac RXMABB 0.0 (0.0) RXMABB 0.0 (0.0) RXMABB 0.0 (0.0) Vac RXMABE 0.0 (0.0) RXMABE 0.0 (0.0) RXMABE 0.0 (0.0) 0 Vac RXMAB 0.0 (0.0) RXMAB 0.0 (0.0) RXMAB 0.0 (0.0) 0 Vac RXMABP 0.0 (0.0) RXMABP 0.0 (0.0) RXMABP 0.0 (0.0) 0 Vac RXMABU 0.0 (0.0) Miniature relays with LED and lockable test button (sold in lots of 0) Vdc RXMABJD 0.0 (0.0) RXMABJD 0.0 (0.0) RXMABJD 0.0 (0.0) Vdc RXMABBD 0.0 (0.0) RXMABBD 0.0 (0.0) RXMABBD 0.0 (0.0) Vdc RXMABED 0.0 (0.0) RXMABED 0.0 (0.0) RXMABED 0.0 (0.0) 0 Vdc RXMABD 0.0 (0.0) RXMABD 0.0 (0.0) RXMABD 0.0 (0.0) Vdc RXMABGD 0.0 (0.0) RXMABBD Vac RXMABB 0.0 (0.0) RXMABB 0.0 (0.0) RXMABB 0.0 (0.0) Vac RXMABE 0.0 (0.0) RXMABE 0.0 (0.0) RXMABE 0.0 (0.0) 0 Vac RXMAB 0.0 (0.0) RXMAB 0.0 (0.0) RXMAB 0.0 (0.0) 0 Vac RXMABP 0.0 (0.0) RXMABP 0.0 (0.0) RXMABP 0.0 (0.0) RXMAB Miniature relays with LED only (sold in lots of 0) Vdc RXMABJD 0.0 (0.0) RXMABJD 0.0 (0.0) Vdc RXMABBD 0.0 (0.0) RXMABBD 0.0 (0.0) 0 Vdc RXMABD 0.0 (0.0) RXMABD 0.0 (0.0) Vdc RXMABGD 0.0 (0.0) Vac RXMABB 0.0 (0.0) RXMABB 0.0 (0.0) Vac RXMABE 0.0 (0.0) RXMABE 0.0 (0.0) 0 Vac RXMAB 0.0 (0.0) RXMAB 0.0 (0.0) 0 Vac RXMABP 0.0 (0.0) RXMABP 0.0 (0.0) RXMAB page page page page page
References (continued) Miniature relays with low level contacts, lockable test button only (sold in lots of 0) Control circuit voltage Number and type of contacts Thermal current (Ith) C/O - A Unit Weight kg (lb) V Vdc RXMGBJD 0.0 (0.0) Vdc RXMGBBD 0.0 (0.0) Vdc RXMGBED 0.0 (0.0) 0 Vdc RXMGBD 0.0 (0.0) RXMGBBD Vac RXMGBB 0.0 (0.0) Vac RXMGBE 0.0 (0.0) 0 Vac RXMGB 0.0 (0.0) 0 Vac RXMGBP 0.0 (0.0) Miniature relays with low level contacts, with LED and lockable test button (sold in lots of 0) Vdc RXMGBJD 0.0 (0.0) Vdc RXMGBBD 0.0 (0.0) Vdc RXMGBED 0.0 (0.0) 0 Vdc RXMGBD 0.0 (0.0) RXMGBBD Vac RXMGBB 0.0 (0.0) Vac RXMGBE 0.0 (0.0) 0 Vac RXMGB 0.0 (0.0) 0 Vac RXMGBP 0.0 (0.0) 0 Vac RXMGBU 0.0 (0.0) Miniature relays with low level contacts, with LED only (sold in lots of 0) Vdc RXMGBJD 0.0 (0.0) Vdc RXMGBBD 0.0 (0.0) Vdc RXMGBED 0.0 (0.0) 0 Vdc RXMGBD 0.0 (0.0) RXMGB Vac RXMGBB 0.0 (0.0) Vac RXMGBE 0.0 (0.0) 0 Vac RXMGB 0.0 (0.0) 0 Vac RXMGBP 0.0 (0.0) page page page page page
References (continued) Sockets Contact terminal arrangement Connection Relay type Sold in lots of Unit Weight kg (lb) Mixed Screw clamp terminals RXMpppp () 0 RXZEM () 0.0 (0.0) RXMpppp Screw connector RXMpppp () 0 RXZEMM () 0.0 (0.) RXMpppp Separate Spring clamp terminals RXMpppp () 0 RXZESS () 0.00 (0.) RXMpppp Box lug connector RXMpppp 0 RXZES0M () 0.0 (0.) RXMpppp 0 RXZESM () 0.0 (0.) RXMpppp 0 RXZESM () 0.00 (0.) RXZEMM + Relay RXMAB Protection modules Description Voltage or use with V Sold in lots of Unit Weight kg (lb) Diode...0 Vdc All sockets 0 RXM00W 0.00 (0.00) RC circuit...0 Vac All sockets 0 RXM0BN 0.00 (0.0) 0...0 Vac All sockets 0 RXM0U 0.00 (0.0) RXM0pp Varistor... Vac / Vdc All sockets 0 RXM0RB 0.00 (0.00)...0 Vac / Vdc All sockets 0 RXM0BN 0.00 (0.00) 0...0 Vac / Vdc All sockets 0 RXM0P 0.00 (0.00) Timing relays Description or Unit use with or timed C/O contacts Sockets RXZEppppp REXLpp () REXLpp () REXLpp RXZ00 Accessories Description or use with Sold in lots of Unit Weight kg (lb) Metal hold-down clip All sockets 0 RXZ00 0.00 (0.00) Plastic hold-down ejector clip All sockets 0 RXZR 0.00 (0.0) Bus jumper -pole (Ith: A) All sockets with separate contacts 0 RXZS 0.00 (0.0) Mounting adapter for DIN rails () All relays 0 RXZEDA 0.00 (0.00) Mounting adapter All relays 0 RXZEA 0.00 (0.00) with mounting lugs for panel Clip-in ID tags All relays (sheet of 0 legends) 0 RXZL0 0.00 (0.) All sockets except RXZEM and RXZESS 0 RXZL0 0.00 (0.00) RXZESS socket 0 RSZL00 0.00 (0.00) () Thermal current Ith: 0A () Thermal current Ith: A () When mounting relay RXMppppp on socket RXZEMpppp, the thermal current must not exceed 0A. () Please consult the "Zelio Time timing relays" catalog. () Test button becomes inaccessible if used with DIN rail mounting adapter or panel mounting adapter and terminals face the user.
Dimensions Dimensions Miniature relays RXMpppppp RXM RXM RXM Coon view Pin side view.. 0. 0.... 0. 0. 0.. 0.. 0..0.. 0. 0. 0. Sockets RXZEM 0. 0. 0.. 0.0. 0.. 0.0. 0.0 RXZEMM. 0.. 0.0. 0.0. 0.. 0.. 0.0 0. 0. ()..00. 0. ()..0. 0. () 0.. 0. 0. () () 0.. 0. 0.. 0. 0 0. 0... Coon side view RXZES0M RXZESM RXZESM () 0. () () 0.. 0. 0..0 0..0 0. ().. 0.. 0. 0. 0. () ().0.0.0 0. 0. 0. ().. 0.. 0..0. 0..0. 0..0 () Relays () Protection module () Metal hold-down clip () elongated holes Ø. x. () bus jumpers page page page page page
Dimensions (continued) Dimensions (continued) Sockets (continued) RXZESS Socket only RXZESS Socket with RXM relay and retention clip..0... 0.. 0.. 0.0..0..0 () 0. ().0 0. (). 0.0. () () Relay () Protection module () Metal retention clip () I.D. tag.0.0 0.. RXZESS Socket with RXM relay and ejector clip...0 () () () () () Relay () Protection module () Ejector clip () I.D. tag.0.0 0. 0. Plastic ejector clip RXZR Metal retention clip RXZ00 ID tag RSZL00. 0..0 0..0.. 0.. 0. 0. 0.0 page page page page page 0
Dimensions (continued) Dimensions (continued) Plastic hold-down clip and clip-in ID tags RXZR RXZL0 Mounting on all sockets ().,.0, (), Bus jumper RXZS Mounting on sockets with separate contacts (view from below) Example of bus jumper mounting on sockets () Clip-in ID tags for all sockets except RXZEM Metal hold-down clip RXZ00, 0., () (),. () () 0. 0.0 () bus jumpers (polarity ) () bus jumpers (polarity ) Mounting adapter for rails () RXZEDA Mounting adapter for panel RXZEA,, () Test button becomes inaccessible page page page page page
Wiring diagrams Wiring diagrams Miniature relays RXMppppp RXMppppp RXMppppp 0 Symbols shown in black correspond to IEC markings; blue correspond to NEMA markings. Sockets RXZEM RXZEMM RXZES0M 0 0 INPUT Symbols shown in black correspond to IEC markings; blue correspond to NEMA markings. RXZESM RXZESM RXZESS 0 0 INPUT INPUT Symbols shown in black correspond to IEC markings; blue correspond to NEMA markings. Protection modules RXM00W RXM0ppp RXM0ppp + + + page page page page page
Wiring instructions for RXZESS socket Wiring instructions for RXZESS socket Recoended wire strip length Recoended removal tool: flat blade, parallel tip Openings for wiring and removal tool () () ~ 0. ~ 0.. 0.0 () Wiring opening () Removal tool opening Wiring insertion Wiring removal Recoended wiring for RXZESS socket lexible wiring with wire 0. to. 0 to AWG cable end wires 0. to. 0 to AWG Solid wiring without wire 0. to. 0 to AWG cable end wires 0. to. 0 to AWG Note: Allow only one wire per terminal opening Wiring (cable) terminal opening Removal tool opening page page page page page
www.schneider-electric.com Schneider Electric USA, Inc. 00 Knightdale Blvd. Knightdale, NC USA Customer Care Center Tel: -- Schneider Electric Canada McLaughlin Rd. Missassauga, Ontario, Canada LR B Canada Customer Care Center Tel: 00-- The information and dimensions in this catalog are provided for the convenience of our customers. While this information is believed to be accurate, Schneider Electric reserves the right to make updates and changes without prior notification and assumes no liability for any errors or omissions. Zelio, Schneider Electric and logo, and Make the most of your energy are trademarks or registered trademarks of Schneider Electric or its affiliates in the United States and other countries. Other trademarks used herein are the property of their respective owners. Design: Schneider Electric Photos: Schneider Electric 0DB0 0 0 Schneider Electric. All rights reserved. /0