Choosing the product that best fulfils your needs Color C75 Press

Choosing the product that best fulfils your needs Color C75 Press with Integrated Fiery Print Server CUSTOMER EXPECTATION DOCUMENT & BUSINESS VALIDATION DOCUMENT MARCH 2014 - VERSION 1.4 CSO-FN-CED-228

This page is intentionally blank

Contents What Does This Document Mean to Me?... 3 Product Overview... 3 Monthly Print Volume Range... 3 Space Requirements (Minimum Service Clearance)... 4 Configuration tables... 4 Responsibility Matrix... 7 Product Specifications... 7 Product Configuration... 8 Engine Registration Specifications... 9 Printer/Engine Specifications... 9 Speed Specifications... 10 Gloss Mode Overview and Print Speed Expectations... 12 SIQA... 12 Memory Configuration... 12 Paper Tray Capacity... 13 Media Selection Guidelines and Media Support... 14 Transparencies... 14 Non-Standard paper sizes... 14 Document Handler... 14 Integrated Scanner... 15 DMP Features (C75 and J75 Press)... 15 Network Scanner Specifications... 16 DMP Accessories and Options... 17 Product Performance... 17 Store-to-USB... 17 Billing Meters... 17 Auditron Function... 18 Accessories/Options... 18 Finishing Options & Specifications... 18 Feeder Options & Specifications... 26 Product Performance... 27 Color C75 Press Limitations... 27 Engine (IOT) limitations... 27 Image Quality Limitations... 28 Duplex Prints Limitations... 29 Transparencies Limitations... 29 Non-standard Paper Size Support... 30 Factors Affecting Productivity and Rated Print Speed... 30 Light Production Finisher (Finisher D4) Limitations... 30 GBC AdvancedPunch Limitations... 30 Supported Paper Types... 31 Recommended Paper... 31 Storage... 31 Installation Requirements... 31 General Installation Requirements... 31 Electrical Requirements... 32 Support... 33 Customer Support... 33 Customer Training... 33 Supplies... 34 Consumables & Ordering... 34 Safety Data Sheets... 35 Approvals... 35 Integrated Fiery Colour Server... 35 Specifications... 36 Key Features and Considerations... 38 Options for Consideration... 39 Business Validation Document... 44 Fuji Xerox Color C75 Press with integrated Fiery Print Server CED Version 1.4 March 2014 2

What Does This Document Mean to Me? The purpose of this document is to ensure that you understand what the Color C75 Press capabilities are, with regards to performance, and to explain the recommended operating guidelines of the Color C75 Press. With this information, you will be able to ensure the Color C75 Press is the right product for your business. In this document you may see the product referred to as Color C75 Press. If you have any further questions, please contact your sales representative and they will be happy to help. This document is based on knowledge available at the time of publication and is for you to keep for future reference. It is an evergreen document. It will be updated as the program proceeds. Product Overview The basic launch configuration of a Color C75 Press will consist of a print engine that provides full 4-Colour/mono printing at 76 A4 pages per minute, with an integrated Fiery Colour server and a choice of finishing, from an Offset Catch Tray (OCT), C Finisher (either with or without booklet), High Capacity Stacker (HCS), Light Production Finisher (either with or without booklet) or GBC AdvancePunch. There will be no copier-only offering of the Color C75 Press. Monthly Print Volume Range This product is designed for operation based on the following recommended monthly impressions: Color C75 Press Minimum AMPV 20,000 Maximum AMPV 100,000 Duty Cycle 540,000 Machine Life 6,000,000 Rated Print Speed 76 AMPV (Average Monthly Print Volume) Range- Working outside this range may affect machine performance. If the device consistently operates at a higher AMPV than the maximum stated, the customer should consider the purchase of multiple devices or a device with a higher average monthly print volume. Duty Cycle- If the device is occasionally used outside of the AMPV range, printing should not exceed the duty cycle limit. Duty cycle represents the rated print volume capacity of the device for a given month (printed on recommended stock and assuming 8hrs per day, 20 days per month usage). Machine Life- The manufacturer s Print Volume limit for reliable performance of the device for the machine s life. Rated Print Speed- Impressions printed per minute on A4 LEF stock, 100gsm. Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 3

Space Requirements (Minimum Service Clearance) These specifications are based on Occupational Health and Safety (OH&S) standards and allow for the safe and effective operation and servicing of the device, including space for: Moveable components, such as draws and doors A technician to safely access the device These space requirements (site width & site depth) are the minimum requirement and compliance with these standards is mandatory for the safety of staff members. Site width and site depth changes with each configuration. Refer to the tables below for actual site requirements for each configuration. Viewed from above Rear Service Clearance 610mm Machine IOT + chosen options Right Service Clearance 610mm Site Depth *1 Left Service Clearance 330mm Front Service Clearance 1067 mm *1 Refer to the tables below for actual site space requirements for each configuration Minimum overhead clearance for all installations (Measured from floor to ceiling) = 2,000 mm (H). Actual machine height is 1,423mm. Configuration tables TIP: when using the below table refer to the configuration of your device, working from left (feeder) to right (finisher) IOT Without HCF Site Width *1 Configuration (includes Bypass Tray & Digital Color Press as standard) Min. Site Space (mm) Space from machine (inc. accessories) to the nearest object (mm) Site Width Site Depth Left Front Rear Right IOT + OCT 2100 2454 330 1067 610 610 IOT + C Finisher 2472 2454 330 1067 610 610 IOT +C Finisher (with Booklet Maker) 2621 2454 330 1067 610 610 IOT + IFM + D4 Finisher 3090 2454 330 1067 610 610 IOT + IFM + GBC AdvancePunch + D4 Finisher 3395 2454 330 1067 610 610 IOT + IFM + D4 Finisher (with Booklet Maker) 3095 2454 330 1067 610 610 IOT + IFM + GBC AdvancePunch + D4 Finisher (with Booklet Maker) 3400 2454 330 1067 610 610 IOT + IFM + D4 Finisher (with Booklet Maker & Folder Unit) 3295 2454 330 1067 610 610 IOT + IFM + GBC AdvancePunch + D4 Finisher (with Booklet Maker & Folder Unit) 3600 2454 330 1067 610 610 IOT + IFM + D4 Finisher (with Booklet Maker) + Square Fold Trimmer 3877 2454 330 1067 610 610 IOT + IFM + GBC AdvancePunch + D4 Finisher (with Booklet Maker) + Square Fold Trimmer 4182 2454 330 1067 610 610 IOT + IFM + D4 Finisher (with Booklet Maker & Folder Unit) + Square Fold 4077 2454 330 1067 610 610 Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 4

Trimmer IOT + IFM + GBC AdvancePunch + D4 Finisher (with Booklet Maker & Folder Unit) + Square Fold Trimmer 4382 2454 330 1067 610 610 IOT + IFM + HCS 2850 2454 330 1067 610 610 IOT + IFM + GBC AdvancePunch + HCS 3155 2454 330 1067 610 610 IOT + IFM + HCS + D4 Finisher 3895 2454 330 1067 610 610 IOT + IFM + GBC AdvancePunch + HCS + D4 Finisher 4200 2454 330 1067 610 610 IOT + IFM + HCS + D4 Finisher (with Booklet Maker) 3900 2454 330 1067 610 610 IOT + IFM + GBC AdvancePunch + HCS + D4 Finisher (with Booklet Maker) 4205 2454 330 1067 610 610 IOT + IFM + HCS + D4 Finisher (with Booklet Maker & Folder Unit) 4100 2454 330 1067 610 610 IOT + IFM + GBC AdvancePunch + HCS + D4 Finisher (with Booklet Maker & Folder Unit) 4405 2454 330 1067 610 610 IOT + IFM + HCS + D4 Finisher (with Booklet Maker) + Square Fold Trimmer 4682 2454 330 1067 610 610 IOT + IFM + GBC AdvancePunch + HCS + D4 Finisher (with Booklet Maker) + Square Fold Trimmer 4987 2454 330 1067 610 610 IOT + IFM + HCS + D4 Finisher (with Booklet Maker & Folder Unit) + Square Fold Trimmer 4882 2454 330 1067 610 610 IOT + IFM + GBC AdvancePunch + HCS + D4 Finisher (with Booklet Maker & Folder Unit) + Square Fold Trimmer 5187 2454 330 1067 610 610 IOT With A4 HCF Configuration (includes Bypass Tray & Digital Color Press as standard) Min. Site Space (mm) Space from machine (inc. accessories) to the nearest object (mm) Site Width Site Depth Left Front Rear Right IOT + A4 High Capacity Feeder (HCF) + OCT 2750 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + C Finisher 3122 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + Finisher C Finisher (with Booklet Maker) 3271 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher 3740 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + GBC AdvancePunch + D4 Finisher 4045 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet Maker) 3745 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + GBC AdvancePunch + D4 Finisher (with Booklet Maker) 4050 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet Maker & Folder Unit) 3945 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + GBC AdvancePunch + D4 Finisher (with Booklet Maker & Folder Unit) 4250 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet Maker) + Square Fold Trimmer 4527 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + GBC AdvancePunch + D4 Finisher (with Booklet Maker) + Square Fold Trimmer 4832 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet Maker & Folder Unit) + Square Fold Trimmer 4727 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + GBC AdvancePunch + D4 Finisher (with Booklet Maker & Folder Unit) + Square Fold Trimmer 5032 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + HCS 3500 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + GBC AdvancePunch + HCS 3805 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + HCS + D4 Finisher 4545 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + GBC AdvancePunch + HCS + D4 Finisher 4850 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + HCS + D4 Finisher (with Booklet Maker) 4550 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + GBC AdvancePunch + HCS + D4 Finisher (with Booklet Maker) 4855 2454 330 1067 610 610 Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 5

IOT + A4 High Capacity Feeder (HCF) + IFM + HCS + D4 Finisher (with Booklet Maker & Folder Unit) 4750 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + GBC AdvancePunch + HCS + D4 Finisher (with Booklet Maker & Folder Unit) 5055 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + HCS + D4 Finisher (with Booklet Maker) + Square Fold Trimmer 5332 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + GBC AdvancePunch + HCS + D4 Finisher (with Booklet Maker) + Square Fold Trimmer 5637 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + HCS + D4 Finisher (with Booklet Maker & Folder Unit) + Square Fold Trimmer 5532 2454 330 1067 610 610 IOT + A4 High Capacity Feeder (HCF) + IFM + GBC AdvancePunch + HCS + D4 Finisher (with Booklet Maker & Folder Unit) + Square Fold Trimmer 5837 2454 330 1067 610 610 IOT With 1 or 2 Tray OHCF Configuration (includes Bypass Tray & Digital Color Press as standard) Min. Site Space (mm) Space from machine (inc. accessories) to the nearest object (mm) Width Depth Left Front Rear Right IOT + 1 or 2 Tray OHCF + OCT 3120 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + C Finisher 3492 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + Finisher C Finisher (with Booklet Maker) 3641 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + D4 Finisher 4110 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + GBC AdvancedPunch + D4 Finisher 4415 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + D4 Finisher (with Booklet Maker) 4115 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + GBC AdvancedPunch + D4 Finisher (with Booklet Maker) 4420 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + D4 Finisher (with Booklet Maker & Folder Unit) 4315 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + GBC AdvancedPunch + D4 Finisher (with Booklet Maker & Folder Unit) 4620 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + D4 Finisher (with Booklet Maker) + Square Fold Trimmer 4897 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + GBC AdvancedPunch + D4 Finisher (with Booklet Maker) + Square Fold Trimmer 5202 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + D4 Finisher (with Booklet Maker & Folder Unit) + Square Fold Trimmer 5097 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + GBC AdvancedPunch + D4 Finisher (with Booklet Maker & Folder Unit) + Square Fold Trimmer 5402 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + HCS 3870 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + GBC AdvancedPunch + HCS 4175 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + HCS + D4 Finisher 4915 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + GBC AdvancedPunch + HCS + D4 Finisher 5220 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + HCS + D4 Finisher (with Booklet Maker) 4920 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + GBC AdvancedPunch + HCS + D4 Finisher (with Booklet Maker) 5225 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + HCS + D4 Finisher (with Booklet Maker & Folder Unit) 5120 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + GBC AdvancedPunch + HCS + D4 Finisher (with Booklet Maker & Folder Unit) 5425 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + HCS + D4 Finisher (with Booklet Maker) + Square Fold Trimmer 5702 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + GBC AdvancedPunch + HCS + D4 Finisher (with Booklet Maker) + Square Fold Trimmer 6007 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + HCS + D4 Finisher (with Booklet Maker & Folder Unit) + Square Fold Trimmer 5902 2478 330 1067 610 610 IOT + 1 or 2 Tray OHCF + IFM + GBC AdvancedPunch + HCS + D4 Finisher (with Booklet Maker & Folder Unit) + Square Fold Trimmer 6207 2478 330 1067 610 610 Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 6

Ongoing Actions Installation Actions *Where a device is installed adjacent to an access way, additional space over and above that specified in this document may be required. Space required for access ways is dependent on circumstance, and it is recommended that the local statutory body be contacted for advice.. Responsibility Matrix The following table summarises customer and Fuji Xerox responsibilities relating to the product: Responsibility Action Customer Fuji Xerox Ensure adequate space and power to install device Confirm and maintain network integrity Unpack device components Connect all system components and install device hardware Install client software / device drivers on PC/workstations * Configure device to connect to the network Acquire and install client workstation network hardware and software Initial operator training Order and install specified Customer Replaceable Units (CRUs) according to machine instructions Order and install staple and dry ink cartridges according to machine instructions Remove, repair and re-install any failed components Provide Helpline support (Customer Care Centre) Provide spare parts Provide service Perform system software upgrades Download any additional fonts to server Utilise tools mode to adjust machine setting(transfer, registration etc) as required for particular jobs. Download any additional fonts to server Monitor and adjust calibration for colour matching of colour management system Install RIP utilities, printer description files, and print drivers on Client workstations. Secure all system software Setup and administer clients * Fuji Xerox will provide installation of RIP client software and drivers on one client PC & MAC, as part of the installation and training session. It is the responsibility of the Customer to disseminate Drivers and utilities to all other users. ** Fuji Xerox responsibility when a Full Service and Maintenance Agreement (FSMA) is purchased. If FSMA is not purchased, this action becomes a customer responsibility. Product Specifications Centerline Paper The Color C75 Press is designed using Xerox media described below as a Centerline Paper. Centerline Paper is recommended to ensure generating the best image quality from the Color C75 Press. It delivers optimum performance in each category of product specification. Other paper brands or weights may alter the print engine s capability. Every effort has been made to ensure that the Color C75 Press supports a broad range of media. Please keep in mind, however, that using only Fuji Xerox-recommended media maximises reliability and paper-handling performance. All references to media capacity and performance in this document are based on centerline paper. You will see the term Centerline paper several times in this document. Centerline stock refers to 100gsm Xerox Colotech+. Parameter Setting Corresponding Each Media In order to maintain optimum throughput and image quality, the Color C75 Press offers parameter setting, which customers can control. There are several parameters for adjustment, such as, alignment, perpendicularity, skew, scale, print position and so on, corresponding to characteristics of each media. Adjusted values can be saved as a profile for recurring jobs. Please refer to Color C75 Press User Guide for more details. ** ** ** ** ** Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 7

Finisher Options Engine (IOT) Feeding Options Note: Paper quality may vary and influences print capability depending on paper manufacturing lot or storing. Please do not store paper in the place with high temperature and humidity. Product Configuration Item Standard () or Option (O) Comments Digital Front End (DFE), RIP The Color C75 Press is not sold as a Copier only model. Bypass Tray If a 1 Tray OHCF or 2 Tray OHCF is purchased, the Bypass tray is relocated to its new position on these units. A4 High Capacity Feeder (A4 HCF) O Cannot work in tandem with another HCF s or OHCF s 1 Tray Oversized High Capacity Feeder (1 Tray OHCF) 2 Tray Oversized High Capacity Feeder (2 Tray OHCF) Color C75 Press O O Cannot work in tandem with another HCF s or OHCF s Cannot work in tandem with another HCF s or OHCF s Interface Module (IFM) O Only required with a Light Production Finisher or High Capacity Stacker. (Mandatory requirement) Offset Catch Tray (OCT) O Cannot work in tandem with another Finisher Option C-Finisher (Advanced Finisher) O Cannot work in tandem with another Finisher Option C-Finisher with Booklet (Professional Finisher) O Cannot work in tandem with another Finisher Option High Capacity Stacker (HCS) O Can work in tandem with D4 Light Production Finisher Option only and requires an IFM Light Production Finisher (Finisher D4) (Light Production C Finisher) O Cannot work in tandem with another Finisher Option and requires an IFM C/Z Folding unit (D4 Folder Unit) O Option for Light Production Finisher only 3 Hole Punch unit for C-Finisher O Option for C-Finisher only 3 Hole Punch for Light Production Finisher O Option for Light Production Finisher only Square Fold / Trimmer O Can work in tandem with D4 Light Production Finisher Option only GBC AdvancedPunch O Requires an IFM and either an HCS or finisher D4 Standard trays Item Color C75 Press Comments Max. Paper Speeds (A4 LEF ppm) Transparency feeding Paper weight range Paper Size Imageable Area Resolution 3 trays as standard, 1 Bypass Tray as standard, (3 Optional trays) Max. 76 ppm Colour Max. 76 ppm b/w 40 ppm B/W, 18 for Colour 64-300 gsm (uncoated) 106-300 gsm (coated) Min: 140mm x 182mm Max : 330mm x 488mm 2400 x 2400 x 1 dpi (Print Engine) 2400 x 2400 x 1 dpi (Copy) 600 x 600 x 1 dpi (Gray Font Represents capacity using Xerox Colotech+ centerline paper. Refer to Paper Tray Capacity below for detailed Tray Specifications Refer to Speed Specifications below for detailed Speed details Refer to RML for recommended transparency type. These premium transparencies are specifically designed to provide optimum copy quality. Use of other transparencies may cause machine damage and result in excessive service calls. Papers that are 80 gsm or lighter and less than 210mm (8.3in) may have increased jam rates. Refer to Paper Tray Capacity below for detailed Tray Specifications Copy: Guaranteed Image Quality area is 297 mm x 432 mm Print: Guaranteed Image Quality area 317 mm x 480 mm The Color C75 Press will reproduce A3 full bleed when printing on SRA3 paper. The maximum length images (480 mm) are only produced on media 488mm long. On all media there is a Lead Edge deletion of 4mm and a Trail Edge deletion of 4mm. Side edge deletion is 3mm except for 330mm x 488mm media. On 330mm x 488mm media the side deletion is 3.5mm. Line Screens supported: 600, 300, 200, 150 Clustered Dot 200 Rotated Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 8

Item Color C75 Press Comments Only) Scanning Resolution 600 x 600x1 dpi or less Several scan resolution settings are selectable via Color C75 Press User Interface touch panel. DeltaE = 7 150 sec or less, after sleep mode or Power On exit 30 sec or less, after low poer mode exit First Print Out Time 11.2 sec or less Color 7.5 sec or less B/W Lower resolutions will result in files that are smaller in size and thereby reducing the customer's network traffic. Within a page In Ready mode, FPOT is the time elapsed from when IOT receives Start command, until the trail edge of the first print exits the print engine. Shutdown Rate (poweroff power-on) Offsetting Catch Tray (Standard Output Device) 87 microns On average, less than 1 fault per day requiring a power-recycle to recover. The specification for Colour to Colour misregistration is equal to or less than 87 microns, evaluated on either 1) Color Xpressions 100gsm uncoated paper or 2) Colotech 100 gsm uncoated paper. Color to Color mis-registration may vary outside of the specification when using heavyweight papers above 100gsm. Based on 35,000 AMPV, one 8-hour shift per day, using centerline papers. 500 sheets Represents capacity using Xerox Colotech+ centerline paper. Engine Registration Specifications The following table contains the image registration, magnification, and skew specifications for the Color C75 Press. Note: These specifications only apply to Xerox Colotech+ centerline paper Note: Environment (temperature, humidity), Type of Media, Media Cut, and part replacement may affect alignment adjustments. Item Trays 1-3 HCF 1 or 2 Tray (A4 OHCF 1Tray A4 HCF) Side1-2 Registration (Lead Reg. direction) 1.0mm 3.0mm Side1-2 Registration (Side Reg. direction) 1.0mm 3.0mm Lead Registration ±0.7mm ±1.5 mm ±1.5 mm Side Registration ±0.7 mm ±1.7 mm ±2.9 mm Lead Skew (200mm) ±0.5 mm ±1.5 mm ±1.5 mm MSI Condition Side Skew (400mm) (Reference) ±1.0 mm ±3.0 mm ±3.0 mm Horizontal Magnification Accuracy (whole area) (100%) ±0.3% ±0.4% - 100% Vertical Magnification Accuracy (whole area) (100%) ±0.3% ±0.4% - 100% Linearity (vertical) ±0.4 mm ±0.5 mm - Linearity (horizontal) ±0.4 mm ±0.4 mm - Linearity (diagonal) ±0.4 mm ±0.6 mm - Perpendicularity (400mm) ±0.6 mm ±1.4 mm - Parallelism (400mm) ±0.6 mm ±1.1 mm - 4.0 mm /4.0 mm /3.0 mm 4.0 mm /4.0-100% Image Loss (LE/TE/SIDE) mm /3.0 mm Printer/Engine Specifications The Color C75 Press engine (IOT) cannot be directly connected to a network and used as a network printer. It must be connected via a Digital Front End (DFE) Refer to RIP Specifications for DFE details. Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 9

Speed Specifications Note: Productivity in these charts is based on images per minute (ipm), not prints per minute (ppm) Note: Productivity in these charts applies to jobs run on a single media; switching trays within a job will impact job productivity. Unless otherwise specified, IPM numbers refer to simplex, duplex, Colour and BW prints or copies. Note: Gloss mode can be enabled or disabled via Tools mode. Feeding from Internal Trays 1-3 and all High Capacity Feeders (HCF speed, if different, is displayed in parenthesis) Media Type / Weight Uncoated Paper 64-176 gsm Uncoated Paper 177-256 gsm Paper length (in the feed direction) Color C75 Press Productivity (PPM) Examples - Feed Standard Sizes Direction * Min. Max. Simplex Duplex A4 LEF 182.0 mm 216.0 mm 76 37 A4 SEF 216.1 mm 298.0 mm 56 26 B4 SEF 298.1mm 365 mm 46 23 A3 SEF 366 mm 432.0 mm 39 (37) 19 (18) SRA3 SEF 432.1 mm 488.0 mm 35 (33) 17 (16) A4 LEF 182.0 mm 216.0 mm 51 25 A4 SEF 216.1 mm 298.0 mm 35 17 Papers heavier than 220 gsm cannot be fed from internal Trays 1-3 Uncoated Paper 257-300 gsm Papers heavier than 220 gsm cannot be fed from internal Trays 1-3 Coated Paper 106-176 gsm B4 SEF 298.1mm 365 mm 30 15 A3 SEF 366 mm 432.0 mm 25 12 SRA3 SEF 432.1 mm 488.0 mm 22 11 A4 LEF 182.0 mm 216.0 mm 35 17 A4 SEF 216.1 mm 298.0 mm 25 12 B4 SEF 298.1mm 365 mm 21 10 A3 SEF 366 mm 432.0 mm 17 8 SRA3 SEF 432.1 mm 488.0 mm 15 7 A4 LEF 182.0 mm 216.0 mm 51 23 A4 SEF 216.1 mm 298.0 mm 35 17 B4 SEF 298.1mm 365 mm 30 15 A3 SEF 366 mm 432.0 mm 25 12 SRA3 SEF 432.1 mm 488.0 mm 22 11 Coated Paper 177-300 gsm Papers heavier than 220 gsm cannot be fed from internal Trays 1-3 * SEF = Short Edge Feed, LEF = Long Edge Feed A4 LEF 182.0 mm 216.0 mm 35 15 A4 SEF 216.1 mm 298.0 mm 25 12 B4 SEF 298.1mm 365 mm 21 10 A3 SEF 366 mm 432.0 mm 17 8 SRA3 SEF 432.1 mm 488.0 mm 15 7 + Media heavier than 220 gsm (80# Cover) cannot be fed from internal Trays 1-3 Tray 1,2 and 3 can feed media weight from 64 to 220 gsm. Examples - Transparencies Standard Sizes Feed Direction * Simplex Duplex Black Only A4 LEF 40 - A4 SEF 29 - Full Color With Finisher A4 LEF 18 - A4 SEF 13 - Full Color Without Finisher A4 LEF 9 - A4 SEF 8 - Examples - Tab Paper Standard Sizes Feed Direction * Simplex Duplex 106-176 gsm A4 LEF 32 177-256 gsm** A4 LEF 23 257-300 gsm** A4 LEF 16 Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 10

Feeding from Multi Sheet Inserter (MSI, Tray 5) Media Type / Weight Uncoated Paper 64-176 gsm Uncoated Paper 177-256 gsm Paper length (in the feed direction) Color C75 Press Productivity (PPM) Examples - Feed Standard Sizes Direction * Min. Max. Simplex Duplex A4 LEF 182.0 mm 216.0 mm 50 23 A4 SEF 216.1 mm 298.0 mm 41 20 B4 SEF 298.1mm 365 mm 35 17 A3 SEF 366 mm 432.0 mm 31 15 SRA3 SEF 432.1 mm 488.0 mm 28 14 A4 LEF 182.0 mm 216.0 mm 40 18 A4 SEF 216.1 mm 298.0 mm 32 16 Papers heavier than 220 gsm cannot be fed from internal Trays 1-3 Uncoated Paper 257-300 gsm Papers heavier than 220 gsm cannot be fed from internal Trays 1-3 Coated Paper 106-176 gsm Coated Paper 177-300 gsm Papers heavier than 220 gsm cannot be fed from internal Trays 1-3 B4 SEF 298.1mm 365 mm 27 13 A3 SEF 366 mm 432.0 mm 24 12 SRA3 SEF 432.1 mm 488.0 mm 22 11 A4 LEF 182.0 mm 216.0 mm 25 12 A4 SEF 216.1 mm 298.0 mm 19 9 B4 SEF 298.1mm 365 mm 17 8 A3 SEF 366 mm 432.0 mm 15 7 SRA3 SEF 432.1 mm 488.0 mm 14 7 A4 LEF 182.0 mm 216.0 mm 40 18 A4 SEF 216.1 mm 298.0 mm 32 16 B4 SEF 298.1mm 365 mm 27 13 A3 SEF 366 mm 432.0 mm 24 12 SRA3 SEF 432.1 mm 488.0 mm 22 11 A4 LEF 182.0 mm 216.0 mm 35 15 A4 SEF 216.1 mm 298.0 mm 25 12 B4 SEF 298.1mm 365 mm 21 10 A3 SEF 366 mm 432.0 mm 17 8 SRA3 SEF 432.1 mm 488.0 mm 15 7 Running lightweight (less than 140 g/m2) coated stock through Tray 5 is not recommended Environmental conditions may require that coated paper be fed one sheet at a time through Tray 5 Depending on printing environment or print engine s condition, productivity may be decreased due to engines automatic set up process to maintain optimum image quality. Print data size may lower productivity due to its RIP processing time. Productivity may be lowered when mixed media job (feeding paper from multiple trays in one job) is set. Setting to make a booklet or to fold lowers productivity. Productivity described above does not indicate an average productivity when running over a prolonged period of time. Examples - Transparencies Standard Sizes Feed Direction * Simplex Duplex Black Only A4 LEF 40 - A4 SEF 29 - Full Color With Finisher A4 LEF 18 - A4 SEF 13 - Full Color Without Finisher A4 LEF 9 - A4 SEF 8 - Examples - Tab Paper Standard Sizes Feed Direction * Simplex Duplex 106-176 gsm A4 LEF 32 177-256 gsm** A4 LEF 23 257-300 gsm** A4 LEF 16 Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 11

Gloss Mode Overview and Print Speed Expectations The Color C75 Press includes a feature known as Gloss Mode. Gloss Mode is a customer selectable feature accessible via a button in the System Administrator Tools or at the color print server. Use of this feature enables a richer, more glossy output that may be desirable for specific jobs. It is specifically designed for use on coated media; it can be used on uncoated media with varying results. The Color C75 Press is delivered with Gloss Mottle Mode OFF (disabled) by default. It can be turned ON (enabled) via the color server or the System Administrator mode. The media weight must be greater than 176 gsm The table below summarizes the impact of Gloss Mode on print speed. Customers should select the operating mode that best meets the requirements of a particular job, while noting the tradeoff between image quality enhancement and print speed. Media Type / Weight Coated Paper 177-300 gsm Paper Sizes (High Capacity Feeder speed, if different, is displayed in parenthesis) Print Speed Pages Per Minute (PPM) Gloss Mode OFF Gloss Mode ON Examples Feed Dir. * Simplex Duplex Simplex Duplex A4 LEF 35 15 18 9 A4 SEF 25 12 13 6 B4 SEF 22 11 11 6 A3 SEF 17 8 9 4 SRA3 SEF 15 7 7 3 * SEF = Short Edge Feed; LEF = Long Edge Feed. SIQA The Simplified Image Quality Tool is an image enhancement tool which allows the machine operator to make image alignment and density uniform adjustments. Using scanned data of printed charts, SIQA obtains uniformity and density information and calculates an adjustment value. The SIQA software must be installed on a PC which meets the following operating system requirements: Windows XP SP3 (32bit); Windows Vista SP2 (32/64bit); Windows 7 SP1(32/64bit) Minimum hardware requirements: CPU Intel Core 2 Duo, 2.4GHz or higher Memory capacity: 2GB or more Hard disk space: 1GB or more LAN connection For more information on SIQA, please refer to the Simple Image Quality Adjustment user guide, included in the Color C75 Press CD pack. Memory Configuration Item Specification Note Print Engine System Memory (Std) 2048MB Maximum Print Engine Page Memory (Std) 316MB Maximum Print Engine HDD (Std) 100GB Maximum Refer to RIP Specifications for RIP Memory Configuration Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 12

Paper Tray Capacity 1-3 (Internal Trays) Tray # Size Capacity (90 gsm Paper) Specified Weights Min.: 140mm x 182mm SEF Max: 330mm x 488mm SRA3 SEF 550 sheets 64-220 gsm uncoated 106-220 gsm coated Tray 5 (Bypass) Tray 6 (A4 HCF) Tray 6 (1 Tray OHCF) Tray 6 & 7 (2 Tray OHCF) Tray 8 (Post Press Inserted) Min: 100mm x 148mm SEF Max: 330mm x 488mm (SRA3) SEF 250 sheets 64-300 gsm uncoated 106-300 gsm coated Coated Sheets need to be fed 1 at a time. B5 or A4 2,000 sheets 64-220 gsm uncoated 182mm x 210mm B5 up to SRA3 182mm x 210mm B5 up to SRA3 Coated media s are not supported. 2,000 sheets 64-300 gsm uncoated 106-300 gsm coated 4,000 sheets 64-300 gsm uncoated 106-300 gsm coated B5 up to A3 150 sheets 64-220 gsm uncoated Tray Switching and Mixed Media Test Results Labels, Coated media & envelopes are not supported The table below provides test results on several job types that utilize mixed media and that require paper tray switching. These jobs were tested by Fuji Xerox to provide representative productivity. Results for similar jobs may vary depending on the Color Server, specific media, paper trays, and print mode that are used. Job Description Configuration or Settings Results 10 sheets, all Letter size LEF 90gsm, alternating between two trays 1 sheet per tray 10 sheets, all A4 LEF, sheets 1&10 210gsm. sheets 2-9 90gsm 3 sheets from different trays: All A4 LEF, Sheet 1 200gsm (Tray 1) Sheet 2: 90gsm (Tray 2) Sheet 3: 90gsm (Tray 3) 30 sheets, all A3 90gsm uncoated. Sheets 1-10: tray 1 Sheets 11-20: tray 2 Sheets 21-30 tray 3 23 sheets, all Letter size LEF 90gsm, (4 from tray 1, 1 from tray 3) repeat 3 times then1 from tray 1, 1 from tray 3) repeat 4 times 225 pages: Letter size210gsm cover, 90gsm body with 13 A4 tabs, 15 sheets between tabs: cover, 15 sheets, tab, 15, tab, 15, tab, 15, cover Run to HCS and Finisher D4 Stack tray with set offset. Auto Tray Switch Timing set to Tray Near Empty. Run to Finisher D4 stack tray with set offset. Auto Tray Switching defined in the job. Simplex. Run to Finisher D4 stack tray with set offset. Auto Tray Switching defined in the job. Simplex. Run to Finisher D4 stack tray with set offset. Auto Tray Switching defined in the job. Simplex. Run to Finisher D4 stack tray with set offset. Auto Tray Switching defined in the job. Simplex. Run to Finisher D4 stack tray with set offset. Auto Tray Switching defined in the job. HCS: 75 ppm Std. Finisher Stack Tray: 75 ppm 8-9ppm 2-3ppm Single Tray: 35ppm Mixed Trays: 35ppm Single Tray: 75ppm Mixed Trays: 75ppm Tabs from Tray 5 or Tray 2 19ppm Toner Out Mode Overview and Print Speed Expectations On some jobs, the xerographic cleaning process may not keep up with the press, resulting in an increase in image quality artifacts. This situation may occur for high toner usage (area coverage) on specific sheet sizes. If this occurs, service can enable Toner Out Mode via a NVM switch to ensure the press will pause to be able to clean the excess toner from the xerographic components. This will lower the actual print speed but reduce the severity of image quality artifacts. The tables below show the expected loss of productivity for each situation. Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 13

Paper Size Area Coverage Prints per hour without Toner Out mode Prints per hour with Toner Out Mode enabled SRA3 100% 420 412 SRA3 80% 420 406 SRA3 50% 420 860 A4 100 4500 4195 A4 80 4500 4241 A4 50 4500 4348 Media Selection Guidelines and Media Support Every effort has been made to ensure that the Color C75 Press supports a broad range of media. Using only Fuji Xerox-recommended media maximizes reliability and paper-handling performance. Furthermore, use of the Centerline papers are recommended to ensure you receive the best image quality from your Color C75 Press. Typically, heavy weight papers exhibit increased variability of formation and surface smoothness, which may result in degraded image quality. Paper from all trays is printed topside first. It is recommended that Fuji Xerox branded paper be loaded with ream wrapper seam-side up. Manufacturers of coated stock do not recommend use of their media when the ambient relative humidity exceeds 60%. Relative humidity greater than 40% may increase the misfeed rate from Trays 1, 2, 3 and 5. All paper stretches to a certain extent during printing. The amount of stretch is dependent on paper type and environmental conditions. Stretch is most noticeable on coated stocks. This stretch can affect front-to-back image registration. Use the Alignment Profiles feature described in the System Administration Guide to minimize this effect. Image registration, image quality (i.e. white spots), and machine reliability can be adversely affected when customcut paper is inaccurately cut, is of poor quality, or loose paper fibers are present on the cut edges. Image registration, image quality (i.e. white spots), jam frequency and machine reliability can be adversely affected when punched or drilled paper is of poor quality and/or loose hole plugs are present in the ream. For further information and recommendations regarding media testing, selection, and handling, refer to the Material Usage Guide provided with your system and the Recommended Materials List (RML) available from your Fuji Xerox representative. Transparencies For optimum system performance and image projection, use Fuji Xerox recommended transparency materials. Use of other transparencies may cause machine damage and result in excessive service calls. Due to the increased thickness of the removable stripe, no more than 100 transparencies should be loaded in a paper tray at one time. The maximum output stack height should not exceed 100 transparencies. Non-Standard paper sizes The Color C75 Press supports non-standard paper sizes. However, due to rounding and measurement unit conversions that occur in the client applications, print server, and press, some mismatch may occur between the paper size entered at the application, and the paper size that must be entered at the printer. The operator may need to adjust the entered paper dimensions by up to 2.5 mm in order for the printer to detect that the requested paper size has been loaded. In addition, the press may interpret some paper sizes included in the PPD as non-standard sizes. Document Handler The Duplexing Automatic Document Feeder (DADF) for hardcopy scanning will handle originals from A5 to A3 in size, and from 38 to 200 gsm in weight. The DADF has a maximum capacity of 250 sheets. Automatic duplex and Manual Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 14

duplex printing can be performed on all recommended sizes of media up to 300 gsm coated or uncoated stock from Tray 5 (Bypass), and Trays 6 & 7. Automatic duplex printing can be performed on recommended media up to SRA3 320mm x 450mm / Maximum 320mm x 482mm from Tray 5 (Bypass), and Trays 6 & 7. Manual duplex can also be performed on recommended media up to SRA3 320mm x 450mm / Maximum 320mm x 482mm from Tray 5 (Bypass). The feeding speed is 80ipm Monochrome and 50ipm in Colour As with any printer or copier, duplex performance may not match the performance for single-sided printing or copying. Paper jam rates may be higher than the rate you will experience for the same throughput material in single sided mode. In order to reduce paper jam frequency when duplex printing on stocks heavier than 220 gsm, paper grain should be perpendicular to the print process direction (i.e. Short Grain). Integrated Scanner The integrated scanner performs Color or B/W scanning at 200 x 200, 300 x 300, 400 x 400, 600 x 600 dpi resolutions. Expected scanning speeds by document size are shown in the table below. Note that the Color C75 Press scanner can image both sides of an original simultaneously. Each side of an original is referred to as an impression, and therefore scan speeds are shown in Impressions Per Minute (IPM) Expected scan speed at 400 dpi or lower: Document Size 1-side B/W 1-side Color 2-sided B/W 2-sided Color and Orientation Scan Speed Scan Speed Scan Speed Scan Speed A4 LEF 100 ipm 100 ipm 200 ipm 200 ipm A4 SEF 71 ipm 71 ipm 44 ipm 44 ipm A3 SEF 57 ipm 57 ipm 114 ipm 114 ipm Expected scan speed at 600 dpi: Document Size 1-side B/W 1-side Color 2-sided B/W 2-sided Color and Orientation Scan Speed Scan Speed Scan Speed Scan Speed A4 LEF 100 ipm 75 ipm 200 ipm 150 ipm A4 SEF 71 ipm 58 ipm 142 ipm 116 ipm A3 SEF 57 ipm 44 ipm 114 ipm 88 ipm DMP Features (C75 and J75 Press) The Color C75/J75 Press Printer enables customers to access the latest office features utilising Office equivalent technologies. These additional capabilities, called Document Messaging Platform (DMP), are available with the Cisco SD2005 5-port 10/100/1000 switch. This enables the Color C75/J75 Press Printer configuration to network both the colour server and the integrated Fiery Colour Server The following DMP features are available on the Color C75/J75 Press Printer: Network scanning scan to email, scan to mailbox, scan to folder and scan to PC Thumbnail Preview High Compression (Advanced Scan kit option) Searchable PDF (Advanced Scan kit option) Scan to MS Word/Excel (Advanced Scan kit option) Specific Colour Scanning (Advanced Scan kit option) Scan-to-USB Hard Disc Drive Overwrite (copies only) Simple Network Management Protocol (SNMP) V3 Active Directory compatibility Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 15

The following DMP features are not available on the Color C75/J75 Press Printer: Printing via the internal controller no internal controller universal driver support Xerox Standard Accounting for prints FAX Network Scanner Specifications Item Type Original Paper Size Scanning Resolution Scanning Halftone Scanning Speed *1 Description Colour Scanner 297 432 mm, Max A3 for both sheets and bound documents 600x600dpi, 400x400dpi, 300x300dpi, 200x200dpi(23.6x23.6 dots/mm, 15.7x15.7 dots/mm, 11.8x11.8 dots/mm, 7.9x7.9dots/mm) Each Colour of RGB: Input: 10 bits, Output: 8 bits Black: 100ppm Colour: 100ppm [Fuji Xerox Standard Document (A4LEF), 200dpi, scan to folder] Connectivity Ethernet 100BASE-TX/10BASE-T/1000BASE-T Protocol TCP/IP(WebDAV, HTTP) File Format Black & TIFF, DocuWorks Document *2, PDF *2, XPS *2 White: Gray scale: TIFF, DocuWorks Document* 2, PDF* 2, XPS* 2 Full Colour: TIFF, JPEG, DocuWorks Document * 2, PDF* 2, XPS* 2 Scan to Mailbox Scan to PC Scan to e-mail Driver Operating System *3 Protocol Operating System *3 TWAIN Windows 2000 Windows XP Windows Server 2003 Windows Server 2008 86 Windows Vista Windows 7 Windows XP Professional 64 Windows Server 2003 64 Windows Server 2008 64 Windows Vista 64 Windows 7 x64 Windows Server 2008 R2 64 TCP/IP(SMB, FTP) Windows 2000 Windows XP Windows Server 2003 Windows Server 2008 86 Windows Vista Windows 7 Windows XP Professional 64 Windows Server 2003 64 Windows Server 2008 64 Windows Vista 64 Windows 7 x64 Windows Server 2008 R2 64 Mac OS X 10.2.x/ 10.3.8/ 10.3.9/ 10.4.2/ 10.4.4/ 10.4.8/ 10.4.9/ 10.4.10/ 10.5.0/ 10.5.1/ 10.5.2/ 10.5.3/ 10.5.4/ 10.6 File Format Black & White: TIFF, DocuWorks Document, PDF, XPS Protocol Grayscale/Full Colour: TIFF, JPEG, DocuWorks Document, PDF, XPS, TIFF, JPEG, DocuWorks Document, PDF, XPS, TCP/IP(SMTP) File Format Black & White: TIFF, DocuWorks Document, PDF, XPS Grayscale/Full TIFF, JPEG, DocuWorks Document, PDF, XPS, Colour: TIFF, JPEG, DocuWorks Document, PDF, XPS, *1 Scanning speed varies according to the document. *2 When retrieving CentreWare Internet Services *3 Please refer to the Fuji Xerox web site for the latest information of the applicable OS. Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 16

DMP Accessories and Options Item Description EM100304 Advanced Scan Kit Hardware Option. Enables High Compression PDF, Specific Colour PDF, Searchable (OCR) PDF and Scan to Word/Excel features ED200638 Scan-to-USB Software Option. Enables scan-to-external USB EC101776 USB Hub Required for connection of external/embedded proximity card reader via USB interface.1 ED200610 Extensible customisation kit Enables MFD customization and required for proximity card reader authentication. Requires USB Hub.1 ED200597 Network Accounting Kit Required for integration with EQUITRAC JBA Systems. Note: The customer must have the Equitrac Server Job Accounting System installed in order for the device to integrate & communicate with the server based accounting system. EC101517 Gigabit ethernet kit Enables connectivity for 1000Base-T. 1 Please consult your Fuji Xerox Sales representative for compatible card reader and authentication terminal options. The Fuji Xerox Software Solution will determine the correct type of reader and terminal combination for the customer s environment. Product Performance Store-to-USB Only USB devices compatible with USB 2.0 and capacity of up to 128GB are supported (FAT32). USB devices that are encrypted with software cannot be used with the machine. Jobs are stored in the root directory of the USB device (or sub directory with PL firmware V1.103.xx). The internal Auditron can restrict access to the optional Store to USB feature, however access control can only be set for the MFD. Individual users can be controlled using LDAP groups. Scan to Word/Excel / Searchable PDF Advanced Scan Kit is required. OCR recognition technology is not 100% accurate. Mistakes in OCR recognition, layout discrepancies, and colour differences may occur in the generated Word/Excel or searchable PDF format document when compared to the original scanned document. The customer should check the original against the document and correct discrepancies manually. Use with the Mac OS version of Microsoft Office (Word/Excel ) and Microsoft Word/Excel 2000 is not guaranteed. Billing Meters An automated meter capture service is available for customers with a Fuji Xerox Australia Support Services Agreement (SSA). This service assists customers with convenient, accurate billing by eliminating the need for manual meter read submission for each device. It is included as a standard part of support for customers with devices and networks compatible with Fuji Xerox meter capture technology. If your device or network is not compatible with our meter capture technology, you will be required to manually submit your meter readings for billing purposes. The billing counters can be viewed on the control panel display screen. Item Description Reported Note Meter 1 Colour Impressions Yes Total output for all color copies/prints regardless of paper size. Meter 2 Black Impressions Yes Total output for all black & white copies/prints regardless of paper size. Meter 3 Meter 4 Colour Large impressions Black Large impressions Yes Yes Meter 5 Total Impressions No For Customer information only. Total output for all colour prints / copies larger than 297mm x 400mm. This meter is captured for statistical purposes only. Total output for all black prints / copies larger than 297mm x 400mm. This meter is captured for statistical purposes only. Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 17

Auditron Function The Color C75 Press engine has the following built-in Auditron features: Item Specification User Access Restriction Depends on Colour Server Functionality (1000users) Number of Sheets Depends on Colour Server Functionality (1000users) Upper bound: 9,999,999 Billing Meter Information Depends on Colour Server Functionality Print Engine UI Auditron functionality only applies to Copy Mode Accessories/Options Finishing Options & Specifications C Finisher (Advanced Finisher) 500 sheet top tray, 3,000 sheet stacker tray, 200 sets or 3,000 sheets A4 Single staple, 100 sets or 3,000 sheets A4 dual staple Uncoated 64-300gsm/Coated 106-300gsm gsm top tray, Uncoated 64-220gsm gsm finisher tray (Stacker Tray). Paper side registration 6mm Staple paper stack height 5.7 mm Maximum 50-sheet stapling (Centerline stock), multi-position The C Finisher offers Hole Punch as a standard feature (Uncoated 64-200 gsm/coated 106-200gsm). Hole punch capacity is equal to the regular capacity of the chosen output tray. For FXA, 2- and 4-hole punch is available (with optional 3 hole punch). Offsetting not enabled in stack tray or top tray for paperweights above 216gsm or larger than A3 Staple capacity will decrease if gsm increases Destination for coated stock is the Top Tray only. Stacks can be punched on the left or right side, or on the top edge. If hole punching fails, check to make sure that the punch waste container is empty before calling for service. C Finisher with Booklet (Professional Finisher) 500 sheet top tray, 1,500 sheet stacker tray 200 sets or 3,000 sheets A4 Single staple, 100 sets or 1,500 sheets A4 dual staple for the Stacker Tray Uncoated 64-300gsm/Coated 106-300gsm top tray, Uncoated 64-220gsm gsm finisher tray (Stacker Tray). Paper side registration 6mm Staple paper stack height 5.7 mm Maximum 50-sheet stapling (Centerline stock), multi-position The C Finisher with Booklet offers Hole Punch as a standard feature (Uncoated 64-200 gsm/coated 106-200gsm). Up to 20 set booklet tray Stapled: 15 sheets/set (64-90gsm) Non-stapled: 5 sheets/set (64-90gsm) Bi-Fold: 1 sheet/set, up to 220gsm uncoated stock Cover Sheet in a Booklet: A single sheet cover is able to be used (Uncoated 91-220gsm) Stackable number of sets depends on media size and type. Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 18

Hole punch capacity is equal to the regular capacity of the chosen output tray. For FXA, 2- and 4-hole punch is available (with optional 3 hole punch). Staple capacity will decrease if gsm increases Destination for coated stock is the Top Tray only. Offsetting not enabled in stack tray or top tray for paperweights above 216gsm or larger than A3 Stacks can be punched on the left or right side, or on the top edge. If hole punching fails, check to make sure that the punch waste container is empty before calling for service. Stapled booklets are limited to 14 sheets of uncoated 90gsm and an uncoated Cover Sheet up to 220gsm The misregistration fold of a stapled booklet will not exceed 3mm for 95% of output. High Capacity Stacker (HCS) The HCS is designed for long production runs. 500 sheet top tray, 5,000 sheet stacker tray (80gsm) Uncoated 64-300/Coated 106-300gsm Top Tray & Stacker Tray (Finisher Tray). Up to SRA3 for the Top Tray & Stacker Tray Up to 5,000 sheets offsetting output stack tray with movable cart to move to off line finishing. Additional cart is available for customer to order. Sample Set 1.) Programmable at Color Server or 2.) On-Demand at HCS User Interface. 2 x HCS s cannot be chained together. Maximum stack weight 70kg Maximum paper size 330mm x 488mm NOTE: the HCF can be connected to a D4 Light Production Finisher in a chained configuration. Stack Tray Capacity by weight and paper finish Paper type and weight Uncoated 64-176 gsm Uncoated 177-256 gsm Uncoated 257-300 gsm Coated 64-106 gsm Coated 106-128 gsm Coated 129-150 gsm Coated 136-216 gsm Coated 217-220 gsm Coated 221-256 gsm Coated 257-300 gsm Paper Size A4 B4 A3 SRA3 330x488mm 5,000 2300 2300 2300 2300 5,000 1900 1900 1900 1900 5,000 1500 1500 1500 1500 5,000 4000 4000 4000 4000 5,000 3400 3400 3400 3400 5,000 2900 2900 2900 2900 5,000 2400 2400 2400 2400 5,000 2000 2000 2000 2000 5,000 1500 1500 1500 1500 5,000 1400 1400 1400 1400 Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 19

HCS Limitations The HCS is subject to stack weight limitations, and settings have been implemented to prevent damage to the unit caused by an excessively heavy stack. Please see the chart above for approximate stack sizes for sheets larger than A4. Stack quality may degrade and jams may increase with 64-106gsm coated paper stocks Mixed stock sizes can be sent to the HCS. However, the HCS generally should be unloaded between jobs that utilize different stock sizes to prevent stack quality problems such as paper misalignment or stack integrity. Optional Interface Module (IFM) The Interface Module aligns the paper paths of the engine and finisher, cools and decurls paper exiting the printer, and allows communication between the engine and finisher. One Interface Module must be ordered when an optional Finisher D4 or High Capacity Stacker is ordered. Light Production Finisher (Finisher D4 or Light Production C Finisher) Shown with Optional Booklet Maker This section provides the details and expectations for the optional Finisher D4 that will be installed with your Color C75 Press. The Finisher D4 is an output device that can process the following: 100-sheet stapling, 3,000 sheets stacking, punch, saddle stapling/center-fold, optional Z-fold/three-fold, and cover paper insertion. The Finisher D4 has a built-in decurler unit that corrects the curl on paper outputted from print engine, a built-in stapler with staple-pin cut function, and a built-in interposer that feeds cover paper to finisher for saddle-staple operation. The Finisher D4 with optional booklet unit (shown in photo) includes the punch and stapler, the stacker tray and top exit tray, and a booklet unit capable of saddle stapling and bi -fold. Light Production Finisher Tray Capacity 500 sheet top tray (80gsm), 3,000 sheets for (A4 only) or 1,500 sheets other than A4 in the stacker tray (80gsm) 200 sets or 3,000 sheets A4 Single staple, 100 sets or 1,500 sheets A4 dual staple for the Stacker Tray. Uncoated 64-300gsm/Coated 106-300gsm Top tray, Uncoated 64-300gsm/Coated 106-300gsm Finisher tray Staple capacity is from 203.2 mm x 254 mm up to A3 Non-stapled Booklets: 5 sheets/set (90 gsm Colotech+) Bi-Fold: 1 sheet/set, Uncoated 64-220gsm/c Cover Sheet in a Booklet: A single sheet cover is able to be used (Uncoated 91-220gsm/Coated 106-220gsm) Bi-folding paper can be one of the following sizes - A4, B4, A3, 12x18in & SRA3 Bi-Folding accuracy for non-stapled sheets: 1.5 mm Booklet fold accuracy of the inner sheet (lead and side edge): Non Stapled and Stapled: 1.5 mm for A4 sheets, 2.0 mm for other sizes Bi-Fold fold accuracy (lead and side edge): 2.5 mm (non booklet job) The HCS can function in tandem with the Light Production Finisher as of Oct 09. NOTE: SRA3 or larger cannot be offset NOTE: Bi-fold unavailable in Copy Mode NOTE: Bi-fold option only available when the Booklet Maker option is purchased Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 20

Staple Capabilities by weight and paper finish for the Light Production Finisher The following refers to the limitations when stapling sheets together. Note: these specifications are irrelevant when creating a Booklet. Refer to Optional Booklet Maker for Light Production Finisher for Booklet stapling specifications. Staple Capabilities by weight and paper finish Paper Size Paper type and weight 203.2x254 (mm) to A3 Uncoated 64-90 gsm 100 91-105 gsm 50 106-128 gsm 30 129-150 gsm 19 151-176 gsm 12 177-220 gsm 5 221-256 gsm N/A 257-300 gsm N/A Coated 64-90 gsm N/A 91-105 gsm N/A 106-128 gsm 5 129-150 gsm 5 151-176 gsm 5 177-220 gsm 5 221-256 gsm N/A 257-300 gsm N/A Optional Booklet Maker for the Light Production Finisher The following refers to the limitation when creating a booklet with Staple. Tray Capacity by weight, size and paper finish Paper type and weight Paper Size A4 to SRA3 Uncoated 64-90 gsm 25* 91-105 gsm 10 106-128 gsm 10 129-150 gsm 10 151-176 gsm 10 177-220 gsm 5 221-256 gsm N/A 257-300 gsm N/A Coated 64-90 gsm NA 91-105 gsm NA 106-128 gsm 10 129-150 gsm 10 151-176 gsm 10 177-220 gsm 5 221-256 gsm N/A 257-280 gsm N/A * Folding and stapling capability may not be as accurate as a booklet of 20 sheets. Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 21

Light Production Finisher C/Z Folder (D4 Folder Unit) Capacity An optional Folder unit that can handle Z-fold, Tri-C, and Tri-Z, it can be added to the Finisher. The C/Z folding tray can accommodate 30 sheets of up to 90 gsm uncoated media. Supported Paper size is A4 to the Folder Drawer, A3 to the Top Tray Fold accuracy as shown below: Z-Fold 2 mm±2mm ±1.0mm ±1.5 mm 1/2Paper +0/-4 mm Envelop / C-Fold ±1.5 mm ±1.5 mm 8 mm ±2mm 2 mm ±2mm Interposer for the Light Production Finisher Maximum paper size is A3. The Finisher D4 includes a standard Interposer, used to insert pre-printed stock into finished sets without having to go through the engine (Uncoated 64-220 gsm). Coated media, labels & envelopes are not supported. Tray capacity equals 150 sheets of 90gsm. Hole Punching Capability for the Light Production Finisher. The Finisher D4 offers Hole Punch as a standard feature. Hole punching capacity is for Uncoated 64-200/Coated 106-200 gsm media. Hole punching for B5, A4, B4 & A3 only. Hole punching is not available to the Booklet Tray. Hole punch capacity is equal to the regular capacity of the chosen output tray. For the FXA market, 2- and 4-hole punch is available. Stacks can be punched on the left or right side, or on the top edge. Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 22

Function Booklet Trimmer Square Fold Booklet Tray Trimmer Booklet Tray Square Fold Trimmer (for Light Production Finisher with Booklet) Overview The SquareFold Trimmer is an optional piece of equipment that flattens the spine of the booklet to make it lay flat and trims the face of the booklet. It can be added to the Finisher D4 with Booklet Maker. Configuration This equipment is located after the Finisher D4 with Booklet Maker and the operation is as follows: Receives the booklet from the Finisher D4 with Booklet Maker. Transports the received booklet to the square fold unit to flatten the spine of the booklet and then to the trimmer unit to trim the face of the booklet Deposits the finished booklet into the booklet tray. Features The SquareFold Trimmer accepts the full range of stock sizes and weights output by the Finisher D4 with Booklet Maker, including custom sizes from A4 to SRA3 Output can be Square-Folded and face trimmed, Square-Folded only, or bypass through both Square-Fold and trim modules to stack in the exit tray. Operator adjustments are available for the SquareFold Trim strength and to the position of the face trim. Refer to the User Guide for adjustment instructions, Cut amount: 2-20mm adjustable in 0.1mm increments Trim capacity: 5 25 sheets @ 80gsm Auto Recognition of SquareFold Trimmer When the SquareFold Trimmer is docked to the Finisher D4 with Booklet Maker via cable, the finisher automatically recognizes that the SquareFold Trimmer is installed. Combination of Output Functions and Destinations O: Can be combined x: Cannot be combined Functions Output Destination Offset X X X X X Staple X X X X X Punch X X X X X Interposer O O O O O Booklet - O O*1 O O Z-Fold X X X X X Letter Fold X X X X X Bi-Fold - O O*1 O O *1: Square-folding/trimming of non-stapled sets and square-folding of 4 or less sheets in a set are outside the specification and cannot be assured (Jams may occur frequently or wrinkles may occur on the square-folded side of paper). Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 23

SquareFold Trimmer Skew Specification Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 24

GBC AdvancedPunch The GBC AdvancedPunch is an inline die punch that utilises modular die sets to enable a variety of hole-punch patterns in A4 long-edge fed media. Output from the GBC AdvancedPunch is bound offline. The GBC AdvancedPunch requires an Interface Module (IFM) as well as a HCS or Finisher D4 with or without Booklet Finisher. Customers wishing to add the GBC AdvancedPunch to their existing system can do so - upgrade kits will be required. The GBC AdvancedPunch is not available for use on C Finisher, or with the Offset Catch Tray. The GBC AdvancedPunch is supported by all colour servers. The GBC AdvancedPunch supports media from 75 to 216 gsm, coated and uncoated. ProClick die (ED200564) supports media from 75 to 203 gsm The GBC AdvancedPunch is able to bypass all coated and uncoated media sizes printed on the Color C75 Press. GBC AdvancedPunch punching Patterns Part Description Numbers For Plastic Comb Binding DIE XEROX ED200556 PB-20H A4 DIE XEROX ED200557 PB-21H A4 For Colour Coil Binding DIE XEROX C4-47H A4 ED200558 For Twin Loop Binding DIE XEROX W2-23H- ED200559 RND A4 DIE XEROX W3-34H- ED200560 RND A4 DIE XEROX W2-23H-SQ ED200561 A4 DIE XEROX W3-34H-SQ ED200562 A4 For Velo Binding DIE XEROX ED200563 VB-12H A4 ProClick A4 34-Hole Binding DIE XEROX ED200564 PC-34H A4 For Loose-leaf Binding DIE XEROX 2H-8mm ED200565 A4 DIE XEROX 4H-8mm ED200566 A4 Punching Pattern The GBC AdvancedPunch comes standard with 1 x Die PB-21 Hole A4 punch size (ED200557) Additional Die s are available for purchase from Fuji Xerox. The approximate life of the Die is 500K punch cycles, replacement Die s are not covered under the service agreement and these can be purchased from Fuji Xerox Supplies. Punch die life will be increased if the wick material is lightly oiled every 50,000 punch cycles (approximately every month) with the initially supplied oil or a quality machine oil such as 3-in-1 Oil. The customer is responsible for applying this oil. Small deposits of oil will be observed around the perimeter of the punched holes until the excess oil is absorbed (usually within 20 sheets). Please refer to the GBC AdvancedPunch User Guide for instructions. Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 25

Feeder Options & Specifications A4 High Capacity Feeder 2,000 sheet capacity (Xerox Centerline 100 gsm Colotech+) Weight range: 64-220 gsm (uncoated) Powered by print engine no external power source required Maximum paper size A4 1 Tray/2 Tray Oversized High Capacity Feeder (1 or 2 Tray OHCF). Handles coated substrates up to 220 gsm for auto duplex Air-assisted, robust feeder design for oversized and heavyweight Maximum auto duplex up to 220 gsm /80 lb. cover, coated and uncoated 1 Tray OHCF Capacity: Minimum Paper Weight: Maximum Paper Weight: Minimum Paper Size: Maximum Paper Size: Maximum Auto Duplex: 1 tray, 2,000 sheets* 64 gsm uncoated or 106 gsm coated 300 gsm coated or uncoated 182mm x 182mm 330mm x 488mm 300 gsm (coated and uncoated) 2 Tray OHCF Capacity: Minimum Paper Weight: Maximum Paper Weight: Minimum Paper Size: Maximum Paper Size: Maximum Auto Duplex: * Xerox Centerline stock. 2 trays, 4,000* sheets (each tray capacity 2,000 sheets) 64 gsm uncoated or 106 gsm coated 300 gsm coated or uncoated 182mm x 182mm 330mm x 488mm 300 gsm (coated and uncoated, limitations apply) Fuji Xerox Color C75 Press with Integrated Fiery Print Server CED Version 1.4 March 2014 26