MMI EXT CARD HW USER GUIDE xe922-3gr. 1VV Rev

MMI EXT CARD HW USER GUIDE xe922-3gr

APPLICABILITY TABLE MMI EXT CARD HW USER GUIDE xe922-3gr PRODUCT HE922-3GR WE922-3GR Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 2 of 22

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Notice While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies or omissions. Telit reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Telit does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others. It is possible that this publication may contain references to, or information about Telit products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Telit intends to announce such Telit products, programming, or services in your country. Copyrights This instruction manual and the Telit products described in this instruction manual may be, include or describe copyrighted Telit material, such as computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Telit and its licensors contained herein or in the Telit products described in this instruction manual may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit, as arises by operation of law in the sale of a product. Computer Software Copyrights The Telit and 3rd Party supplied Software (SW) products described in this instruction manual may include copyrighted Telit and other 3rd Party supplied computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and other 3rd Party supplied SW certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Telit or other 3rd Party supplied SW computer programs contained in the Telit products described in this instruction manual may not be copied (reverse engineered) or reproduced in any manner without the express written permission of Telit or the 3rd Party SW supplier. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit or other 3rd Party supplied SW, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product. Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 3 of 22

Usage and Disclosure Restrictions License Agreements The software described in this document is the property of Telit and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement. Copyrighted Materials Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Telit High Risk Materials Components, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (High Risk Activities"). Telit and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities. Trademarks TELIT and the Stylized T Logo are registered in Trademark Office. All other product or service names are the property of their respective owners. Third Party Rights The software may include Third Party Right software. In this case you agree to comply with all terms and conditions imposed on you in respect of such separate software. In addition to Third Party Terms, the disclaimer of warranty and limitation of liability provisions in this License shall apply to the Third Party Right software. TELIT HEREBY DISCLAIMS ANY AND ALL WARRANTIES EXPRESS OR IMPLIED FROM ANY THIRD PARTIES REGARDING ANY SEPARATE FILES, ANY THIRD PARTY MATERIALS INCLUDED IN THE SOFTWARE, ANY THIRD PARTY MATERIALS FROM WHICH THE SOFTWARE IS DERIVED (COLLECTIVELY OTHER CODE ), AND THE USE OF ANY OR ALL THE OTHER CODE IN CONNECTION WITH THE SOFTWARE, INCLUDING (WITHOUT LIMITATION) ANY WARRANTIES OF SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR PURPOSE. NO THIRD PARTY LICENSORS OF OTHER CODE SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND WHETHER MADE UNDER CONTRACT, TORT OR OTHER LEGAL THEORY, ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE OTHER CODE OR THE EXERCISE OF ANY RIGHTS GRANTED UNDER EITHER OR BOTH THIS LICENSE AND THE LEGAL TERMS APPLICABLE TO ANY SEPARATE FILES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Copyright Telit Communications S.p.A. 2011. Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 4 of 22

Table of Contents 1. Introduction... 6 1.1. Scope... 6 1.2. Related Documents... 6 1.3. Abbreviations... 6 2. General description... 7 2.1. MMI Board view... 8 3. Component Assembly Diagram... 9 4. MMI Card mechanical case... 11 5. 120-Pin B2B Edge connector... 14 6. Schematics... 17 7. Safety Recommendations... 21 8. Document History... 22 Table of Figures Figure 1 MMI Card Top View... 8 Figure 2 MMI Card Bottom View... 8 Figure 3 Component Assembly Top (Top View)... 9 Figure 4 component Assembly Bottom (Bottom View)... 10 Figure 5 MMI Mechanical Case... 11 Figure 6 Screws connecting MMI case to EVB case... 12 Figure 7 Complete DevKit view... 13 List is Tables Table 1 JM2... 14 Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 5 of 22

1. 0BIntroduction 1.1. 8BScope The scope of this document is to describe the xe922-3gr MMI Board which is included in Telit EVB-MMI pack, part of the complete xe922-3gr Development Kit. 1.2. 9BRelated Documents Doc # 1VV0301272 1VV0301249 1VV0301285 Document Name xe922-3gr Hardware User Guide Generic Evaluation Board Hardware User Guide IFBD HW USER GUIDE_xE922-3GR 1.3. 10BAbbreviations Term EVB IFBD MMI CSI CABC DSI GPIO SD MIPI MII UART UMTS USB USIF WCDMA DRD OTG Definition Evaluation Board Interface Board Multi-Media-Interface Camera serial interface Content Adaptive Backlight Control Display serial interface General-purpose input/output Secure digital Mobile Industry Processor Interface Multi-Media Interface Universal asynchronous receiver transmitter Universal mobile telecommunications system Universal serial bus Universal serial interface Wideband code division multiple access Dual Role Device (USB) On The Go (USB) Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 6 of 22

2. 1BGeneral description The MMI Extension Card is a complementary HW that enables multimedia functionality of Telit xe922-3gr. The MMI card is custom designed to interface the Telit module xe922-3gr with the MMI peripherals via the Telit Generic Evaluation Board (EVB) thus forming the complete Development Kit of xe922-3gr. The MMI card HW design includes the following items: FPC connector for placing 5.85 FHD display LCD Backlight Circuit Multi Touch Support (Via FPC Connector) Main Camera 13MP (Via FPC Connector) Sub Camera 5MP (Via FPC Connector) Camera Flash / Flashlight Circuit Header for connecting optional sensors Board to Board edge connectors for interfacing the EVB main board Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 7 of 22

2.1. 1BMMI Board view The below pictures show the MMI card Top and bottom view MMI EXT CARD HW USER GUIDE xe922-3gr Figure 1 MMI Card Top View Figure 2 MMI Card Bottom View Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 8 of 22

3. 2BComponent Assembly Diagram Searchable PDF CS1774A_Placement.pdf Figure 3 Component Assembly Top (Top View) Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 9 of 22

4. 3BMMI Card mechanical case In order to improve platform handling, maintenance and shipment and enable enhanced demo, a custom case was designed to fit the MMI board. The case enables access and visibility to all required items (LCD, Touch) while covering all the non-active areas thus protecting the platform from potential damage. The mechanical case is aligned with Telit Generic EVB mechanical case so that attaching the MMI to the EVB main board forms a solid and robust DevKit. The MMI mechanical case is shown below Figure 5 MMI Mechanical Case Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 11 of 22

In order to attach the MMI card to the Generic EVB, user should do the following: Attach the 120 pin edge connector on MMI to the 120 pin edge connector on the EVB Mount the screws shown below on the 2 sides of the MMI card connecting the MMI case to EVB case Figure 6 Screws connecting MMI case to EVB case Mount the bottom screw connecting the MMI case to ECV case Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 12 of 22

The picture below shows the complete DevKit when the MMI card is attached to the EVB Figure 7 Complete DevKit view Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 13 of 22

5. 4B120-Pin B2B Edge connector The interface between MMI extension board and the generic EVB is implemented via a 120p (20p x 6 rows) SAMTEC SEARAY 1.27mm High Speed/High Density B2B right angle (edge) connector. The below table describes the MMI connector pin naming as well as the mapping of each MMI signal to the associated pin of the xe922-3gr module. Table 1 JM2 Pin # MMI Connector Pin Name Generic EVB Pin Name xe922-3gr Pad Description 1 VBATT_AUX VBATT_AUX Supply for main board 2 VBATT_AUX VBATT_AUX Supply for main board 3 DSI_CLK_N DSI_CLK_N P21 Display Interface 4 DSI_CLK_P DSI_CLK_P M21 Display Interface 5 DSI_D3_N DSI_D3_N H21 Display Interface 6 DSI_D3_P DSI_D3_P K21 Display Interface 7 GND GND GND 8 GND GND GND 9 LCD_TE GPS_PPS AP9 GPS Pulse Sync 10 NC WIFI_SDCMD_TGPIO14 N/A 11 NC WCI_RX N/A 12 DSI_D2_N DSI_D2_N J20 Display Interface 13 1V8_OUT VAUX/PWRMON 1.8V for I/O and LCD 14 CAM1_RESET WIFI_SD4_TGPIO23 G4 Main Camera Reset 15 NC LED_DRV N/A 16 NC WIFI_SDCLK_TGPIO19 N/A 17 NC TGPIO_30_CTS_GPS N/A 18 DSI_D2_P DSI_D2_P L20 Display Interface 19 1.8V 1.8V Not Used 20 NC WIFI_SD3_TGPIO18 N/A 21 VAUX_2P85V LED_DRV_EN AH17 Auto Focus Supply 22 CAM1_TORCH WIFI_SD7_TGPIO26 G6 Main Camera Torch mode enable 23 DSI_D1_N DSI_D1_N N20 Display Interface 24 DSI_D1_P DSI_D1_P R20 Display Interface 25 NC WCI_TX N/A 26 LEDFB_DN RFCLK2_QCA AU17 Backlight feedback Negative 27 NC WIFI_SD2_TGPIO17 N/A 28 CAM1_PD WIFI_SD5_TGPIO24 A4 Main Camera Power Down 29 DSI_D0_N DSI_D0_N P19 Display Interface 30 DSI_D0_P DSI_D0_P S19 Display Interface 31 I2C_SCL_AUX I2C_SCL_AUX AT2 I2C3_SCL 32 I2C_SDA_AUX I2C_SDA_AUX AS1 I2C3_SDA 33 NC WIFI_SD0_TGPIO15 N/A 34 NC WIFI_SD1_TGPIO16 N/A 35 CSI1_CLK_P CSI1_CLK_P C20 Main Camera interface Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 14 of 22

Pin # MMI Connector Pin Name Generic EVB Pin Name xe922-3gr Pad Description 36 CSI1_CLK_N CSI1_CLK_N E20 Main Camera interface 37 CAM2_I2C_SDA I2C_SDA_EXT Front Camera I2C (future) 38 CAM2_I2C_SCK I2C_SCL_EXT Front Camera I2C (future) 39 CAM1_FLASH WIFI_SD6_TGPIO25 B7 Main Camera Flash enable 40 GPIO45 WIFI_SDRST_TGPIO13 E10 GPIO45 (reserved for sensors) 41 CSI1_D3_P CSI1_D3_P E18 Main Camera interface 42 CSI1_D3_N CSI1_D3_N G18 Main Camera interface 43 GPIO44 TGPIO_20 G10 GPIO44 (Reserved for Sensors) 44 TP_RESET TGPIO_01 F7 Touch panel Reset 45 CAM_I2C_SDA TGPIO_02 AM17 Main Camera I2C 46 CAM_I2C_SCL TGPIO_03 AP17 Main Camera I2C 47 CSI1_D2_P CSI1_D2_P F19 Main Camera interface 48 CSI1_D2_N CSI1_D2_N H19 Main Camera interface 49 CAM2_RESET TGPIO_21 E4 Front Camera Reset 50 NC TGPIO_04 N/A 51 GPIO0_EINT5 TGPIO_05 AV8 GPIO0 (reserved for Sensors) 52 LCD_RESET TGPIO_06 AP11 Display Reset 53 CSI1_D1_P CSI1_D1_P M19 Main Camera interface 54 CSI1_D1_N CSI1_D1_N K19 Main Camera interface 55 GPIO7 TGPIO_22 AN8 GPIO7 (Reserved for Sensors) 56 TP_SCL TGPIO_07 AB17 Touch panel I2C Clock 57 TP_SDA TGPIO_08 AD17 Touch panel I2C Data 58 TP_IRQ TGPIO_0 F11 Touch panel interrupt 59 CSI1_D0_P CSI1_D0_P D21 Main Camera interface 60 CSI1_D0_N CSI1_D0_N F21 Main Camera interface 61 NC ETH_INT_N N/A 62 CAM2_PD TGPIO_10 H3 Front Camera Power Down 63 NC TGPIO_11 N/A 64 CAM_MCLK TGPIO_12 P17 Camera Main Clock (for both sensors) 65 CSI2_CLK_P CSI2_CLK_P B19 Front Camera Interface 66 CSI2_CLK_N CSI2_CLK_N D19 Front Camera Interface 67 NC ETH_RST_N N/A 68 NC PCIE_CLKREQ_N N/A 69 LEDFB_DP PCIE_EP_WAKE_N AS17 Backlight feedback Positive 70 CAM_MCLK1 PCIE_EP_RESET_N P17 Future Optional Main Camera clock 71 CSI2_D0_P CSI2_D0_P A18 Front Camera Interface 72 CSI2_D0_N CSI2_D0_N C18 Front Camera Interface 73 NC MAC_RXDV_ER N/A 74 NC MAC_MDIO N/A 75 NC TGPIO_29_RTS_GPS N/A 76 NC TGPIO_28_RXD_GPS N/A 77 NC TGPIO_27_TXD_GPS N/A 78 CABC PCIE_REFCLK_M AS15 Content Adaptive Backlight Control 79 NC MAC_CRS_DV N/A Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 15 of 22

Pin # MMI Connector Pin Name Generic EVB Pin Name xe922-3gr Pad Description 80 NC MAC_MDC N/A 81 LEDDRV WLAN_SLEEP_CLK AP13 Backlight Driver 82 GPIO55_EINT15 REF_CLK G14 GPIO / External IRQ 83 GND GND GND 84 VAUX_1P8V PCIE_REFCLK_P AA18 Camera/Auxilary 1.8V power supply 85 NC MAC_RXD[3] N/A N/A 86 NC MAC_TXEN_ER N/A N/A 87 NC DVI_CLK N/A N/A 88 NC DVI_WAO N/A N/A 89 NC PCIE_TX_M N/A N/A 90 GND GND GND 91 NC MAC_RXD[2] N/A N/A 92 NC MAC_REF_CLK N/A N/A 93 NC DVI_RX N/A N/A 94 NC DVI_TX N/A N/A 95 NC PCIE_TX_P N/A N/A 96 NC PCIE_RX_M N/A N/A 97 NC MAC_RX_CLK N/A N/A 98 NC MAC_TXD[2] N/A N/A 99 NC SPI_CLK N/A N/A 100 NC SPI_CS N/A N/A 101 GND GND GND 102 NC PCIE_RX_P N/A N/A 103 NC MAC_RXD[1] N/A N/A 104 NC MAC_TX_CLK N/A N/A 105 NC SPI_MISO N/A N/A 106 NC SPI_MOSI N/A N/A 107 NC SGMII_TX_P N/A N/A 108 GND GND GND 109 NC MAC_RXD[0] N/A N/A 110 NC MAC_TXD[1] N/A N/A 111 GND GND GND 112 GND GND GND 113 NC SGMII_TX_M N/A N/A 114 NC SGMII_RX_P N/A N/A 115 NC MAC_TXD[3] N/A N/A 116 NC MAC_TXD[0] N/A N/A 117 NC USB_EXT_D- N/A N/A 118 NC USB_EXT_D+ N/A N/A 119 GND GND GND 120 NC SGMII_RX_M N/A N/A Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 16 of 22

7. 6BSafety Recommendations READ CAREFULLY Be sure the use of this product is allowed in the country and in the environment required. The use of this product may be dangerous and has to be avoided in the following areas: Where it can interfere with other electronic devices in environments such as hospitals, airports, aircrafts, etc. Where there is risk of explosion such as gasoline stations, oil refineries, etc. It is responsibility of the user to enforce the country regulation and the specific environment regulation. Do not disassemble the product; any mark of tampering will compromise the warranty validity. We recommend following the instructions of the hardware user guides for a correct wiring of the product. The product has to be supplied with a stabilized voltage source and the wiring has to be conforming to the security and fire prevention regulations. The product has to be handled with care, avoiding any contact with the pins because electrostatic discharges may damage the product itself. Same cautions have to be taken for the SIM, checking carefully the instruction for its use. Do not insert or remove the SIM when the product is in power saving mode. The system integrator is responsible of the functioning of the final product; therefore, care has to be taken to the external components of the module, as well as of any project or installation issue, because the risk of disturbing the GSM network or external devices or having impact on the security. Should there be any doubt, please refer to the technical documentation and the regulations in force. Every module has to be equipped with a proper antenna with specific characteristics. The antenna has to be installed with care in order to avoid any interference with other electronic devices and has to guarantee a minimum distance from the body (20 cm). In case of this requirement cannot be satisfied, the system integrator has to assess the final product against the SAR regulation. The European Community provides some Directives for the electronic equipments introduced on the market. All the relevant information s are available on the European Community website: http://ec.europa.eu/enterprise/sectors/rtte/documents/ The text of the Directive 99/05 regarding telecommunication equipments is available, while the applicable Directives (Low Voltage and EMC) are available at: http://ec.europa.eu/enterprise/sectors/electrical/ Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights Reserved. Page 21 of 22