Cisco Certification Exam

Cisco 200-001 Certification Exam Number: 200-001 Passing Score: 800 Time Limit: 120 min File Version: 14.5 http://www.gratisexam.com/ Cisco 200-001 Certification Exam Exam Name: Implementing Cisco Video Network Devices (VIVND) For Full Set of Questions please visit: http://www.selftestengine.com/200-001.html

Exam A QUESTION 1 Which statement is correct regarding the difference between Multisite and Multi way conferencing? A. Multisite requires the Multisite options key to be installed and configured at the endpoint, whereas Multi way requires a Cisco TelePresence Video Communications Server and a centralized multipoint unit. B. Multisite requires configuration on the endpoint, whereas Multi way requires the Multi way options key to be installed. C. Multisite requires the presence of a multipoint control unit, whereas Multi way relies on the endpoint conferencing capacity. D. Multisite is used to Conference in multiple sites, whereas Multi way is initiate multipoint conferencing Correct Answer: A QUESTION 2 When scheduling a multipoint conference, which three devices are required for the conference to be scheduled and completed successfully? (Choose three) A. Cisco Unified Communication Manager B. Multipoint control unit C. Cisco Unity Connection D. Video conferencing endpoints E. Cisco Unified IM and Presence Correct Answer: ABD QUESTION 3 Which two layouts or switching mode are supported with Cisco TelePresence Multipoint Switch? (Choose two) A. Speaker switching B. Active speaker switching C. Active continuous presence D. Room switching E. Enabled continuous presence F. Continuous presence Correct Answer: AD /Reference: QUESTION 4 Which two Cisco TelePresence systems would be appropriate for an execute personal office? (Choose two) A. Cisco TelePresence System 500 B. Cisco TelePresence EX Series C. Cisco Jabber

D. Cisco Jabber Video for TelePresence E. Cisco IP Video Phone E20 Correct Answer: AB /Reference: http://www.gratisexam.com/ QUESTION 5 Which encoder is best suited for professional, studio-quality audio and video processing? A. Scientific Atlanta Encoder B. Cisco Digital Media Encoder 2000 C. Cisco Digital Media Encoder 1000 D. Cisco Digital Media Encoder 3000 Correct Answer: B QUESTION 6 You have been informed from the field that a new Cisco TelePresence video endpoint has been deployed with an IPv4 address of 172.28.256.45. Which three devices could you use to see if the endpoint is required and available for a call? (Choose three) A. Cisco TelePresence Video Communication Server B. Cisco 3250 Layer 2/3 Switch C. Active Directory Server D. Cisco Giga Switch Router E. Cisco Unified Communications Manager server F. Cisco TelePresence Manager Suite server Correct Answer: ACF /Reference: QUESTION 7 Refer to the exhibit. Which two settings that could be dialed to start a multipoint conference that is hosted by the multipoint control? (Choose two).

A. Ex90@cost147 local B. 5919 C. Ex90@osl148 local D. Mcu8510@osl147 local E. ex90 F. 52900121 Correct Answer: BD QUESTION 8 Refer to the exhibit. Which SIP URI should be dialed in order to reach the endpoint that is registered with the IP address 172.29.1.221 from another endpoint with a URI of sip e20@dca test? "First Test, First Pass" - www.lead2pass.com 8

A. ex90@ost148 local B. ex90 C. sip ex90@osl147 local D. 172.29.1.221 E. 529000121 Correct Answer: C QUESTION 9 Which two of these are required in order to complete the password recovery of a Cisco TelePresence System endpoint? (Choose two) A. Must have the security question answer for the endpoint B. Must be in the same room as the main display C. Must have SSH enabled on the endpoint D. Must have FTP enabled on the endpoint E. Must have SFTP enabled on the endpoint

F. Must call Cisco TAC for the security code Correct Answer: BC /Reference: QUESTION 10 Refer to the exhibit. You have just finished installing a 65-inch profile system in a multipurpose room. After powering up entire system, only one display is used. Using the information in the exhibit, why is the second display not displaying anything from the system? "First Test, First Pass" - www.lead2pass.com 14 A. The dual display option key has not been input into the codec. B. The codex has the appropriate option keys installed, so entire the display is not cabled correctly, the codec is configured correctly, the codec is configured incorrectly, or there is no input being sent to the display. C. The Cisco TelePresence profile systems do not support dual display. D. The display is not powered on. Correct Answer: A QUESTION 11 Instructions: To access the multiple-choice question, click on the tab titled "Question" on the bottom of the panel. Scenario: In this item, you will need to use all information presented to you to successfully answer the question.

"First Test, First Pass" - www.lead2pass.com 15

"First Test, First Pass" - www.lead2pass.com 16 A.

B. C. D. Correct Answer: /Reference: Local NS Web Server Edit QUESTION 12 When placing a call from Cisco Jabber Video for TelePresence to the Cisco TelePresence System Codec C40, which FECCs are available? A. Left, right, up, down, zoom-in, and zoom-out are all available B. Only up and down are available C. No FECO is available D. Only left and right are available Correct Answer: A QUESTION 13 Refer to the exhibit. Under which tab can the registration status for the endpoint be found? A. Diagnostics B. Configuration C. Maintenance D. Call control Correct Answer: A /Reference: QUESTION 14 When dialing, in a format that is consistent for all users of a system, a user who has multiple TelePresence Video Devices associated, what are three minimum requirements that must be configured for the user to be able to receive video calls? (Choose three) A. The Cisco TelePresence Management Suite must be installed B. The Active Directory server must be installed C. Ensure that the Cisco TelePresence Communication Server has the FindMe option installed D. Ensure that FindMe is set to on E. The NTP server must be set up Correct Answer: ABC

QUESTION 15 Refer to the exhibit. Under which tab can the log file for the endpoint found? A. Call Control B. Configuration C. Diagnostics D. Maintenance Correct Answer: C /Reference: QUESTION 16 When manual discovery is used to register a Cisco TelePresence endpoint in a VCS via SIP, which two pieces of information are required to be configured on the endpoint for registration to occur, assuring that Cisco TMS and DNS are not being used? (Choose two) A. External manager address B. SIP URI C. H.323 alias D. Option 150 E. RTP ports F. Proxy address Correct Answer: BF /Reference: QUESTION 17 Which three of these are functions of the Cisco TelePresence Management Suite? (Choose three)

A. Rebooting endpoints that are registered to the Cisco TelePresence Video Communication Server B. Intelligent call routing engine C. Automatic software update and release keys D. Tracing SIP and H.323 calls E. Provisioning a Cisco TelePresence System endpoint F. Managing phonebooks for endpoints that are registered to the Cisco Unified Cisco Unified Communication Manager Correct Answer: CEF QUESTION 18 What is the main difference between a Cisco TelePresence Multipoint Control Unit and a Cisco TelePresence Multipoint Switch? A. The Cisco TelePresence Multipoint Control Unit us a hardware bridge. The Cisco TelePresence Multipoint Switch is a software bridge. B. The Cisco TelePresence Multipoint Contact Unit is a software bridge for immersive and non Immersive endpoints. The Cisco TelePresence Multipoint Switch is a hardware bridge for non- immersive endpoints. C. The Cisco TelePresence Multipoint Control Unit has a latency of 100 ms. D. The Cisco TelePresence Multipoint Control Unit delivers automatic voice activated switching. The Cisco TelePresence Multipoint Switch provides active presence. Correct Answer: D QUESTION 19 Refer to the exhibit. When the Cisco Jabber Video for TelePresence Fails to register with the server, which two fields should be configured at a minimum, assuring SRV records are not configured? (Choose two) "First Test, First Pass" - www.lead2pass.com 24

A. The SIP domain B. The IP address of the Cisco TelePresence Management Suites for the internal server C. The internal DNS server name for the Cisco TelePresence management Suite D. The IP address of the Cisco Unified Communication Manager for the internal server E. The internal or external DNS server name for the Cisco TelePresence Video Communications Server Correct Answer: AD QUESTION 20 Which Cisco TelePresence multipoint platform utilizes only Cisco Unified Communication manager for call control? A. Cisco TelePresence Media Bridge Server B. Cisco TelePresence Server C. Cisco TelePresence System 500-32 D. Cisco TelePresence SX20 E. Cisco TelePresence Multipoint Switch F. Cisco TelePresence Multipoint Control Unit Correct Answer: E

/Reference: QUESTION 21 While performing a password recovery on a Cisco TelePresence endpoint, what is the maximum amount of time for input to be received by the device before the system exits the password recovery mode? A. 20 seconds B. 60 seconds C. 40 seconds D. 30 seconds E. 15 seconds Correct Answer: B QUESTION 22 Which of these needs to be enabled in Cisco Unified Communication in order for the Cisco TelePresence system 500-32 to be able to share a presentation with a Cisco TelePresence System C40 endpoints that is registered to a VCS? A. Allow presentation sharing using H.323 B. Allow presentation sharing using BFCP C. Send send-receive SDP in mid-call invite D. Deliver conference bridge identifier E. Allow ix application media Correct Answer: B QUESTION 23 What are the best practices for maintaining a high-quality video call regarding latency, jitter, and packet loss? A. 500-ms one-way delay, 50-ms jitter, 5 percent packet loss B. Less than 150-ms one-way delay, 30-ms jitter, less than 3 percent packet loss C. 20-ms one-way delay, no jitter, no packet loss D. 150-to 400-ms one-way delay, 50-ms jitter, 5 percent packet loss Correct Answer: B /Reference: QUESTION 24 Which component of the Cisco TelePresence multipoint media infrastructure is intended for use only with non-immersive endpoints? A. Cisco TelePresence System 500-32 B. Cisco TelePresence Multipoint Switch C. Cisco TelePresence Multipoint Control Unit D. Cisco TelePresence Server

Correct Answer: C QUESTION 25 Which two systems would be an appropriate solution for a traveling employee? (Choose two) A. Cisco IP Video Phone E20 B. Cisco TelePresence System 500 C. Cisco TelePresence EX Series D. Cisco Jabber E. Cisco C-Series codes F. Cisco Jabber Video for TelePresence Correct Answer: DF QUESTION 26 Which two additional items can be configured for an endpoint to register with the Cisco TelePresence Video Communications Server for H.323 to function correctly? (Choose two.) A. unique DNS entry ID B. unique E.164 alias C. unique NTP server IPv4 address D. unique H.323 ID E. unique real-time transport protocol port numbers F. unique system ID Correct Answer: BD /Reference: QUESTION 27 Which Cisco Video Surveilleance device is responsible for providing video stream to monitors after the respective layouts and views are received by the monitors? A. Cisco Video Surveillance Media Server B. Cisco Video Surveillance Manager C. Cisco IP Video Surveillance Operations Manager D. Cisco IP Video Surveillance Virtual Matrix Viewer Correct Answer: A QUESTION 28 Which of three devices require configuration in order for an endpoint to initiate a Multiway conference? A. Endpoint only B. Endpoint, Cisco TelePresence Video Communications Server, and multiple control unit C. Multipoint control unit only

D. Endpoint and multipoint control unit only E. Endpoint and Cisco TelePresence Video Communications Server only F. Cisco TelePresence Video Communications Server only Correct Answer: B QUESTION 29 Threat monitoring in physical access security can be based upon which three of these? (Choose three) A. Weather B. Fingerprints C. Badges D. Age E. Doors F. Height Correct Answer: BCF QUESTION 30 During the initial setup of Cisco TelePresence System 500, you are required to do an initial camera setup. What might be a primary reason that the failure occurs? A. The room is too dark B. The system is too far away from the target C. The camera cannot focus on the target D. The cable to the camera is not connected correctly Correct Answer: A QUESTION 31 Which three of these are valid ways to initially configure a C-Series codec in a network where DHCP is not used? (Choose three) A. Secure web browser B. Telnet C. Tandberg Remote Control V D. Touch screen interface E. CLI using a console cable F. Secure copy program Correct Answer: ACE QUESTION 32 Instructions: To access the multiple-choice question, click on the tab titled "Questions" on the button of the panel. Scenario: In this item, you will need to use all informartion presented to you to successfully answer the question.

Refer to the exhibits. An administrator needs to perform a factory reset on a C-Series endpoint. What are two valid ways to accomplish this task? (Choose two) A. "First Test, First Pass" - www.lead2pass.com 31 B. C. D. Correct Answer: AC /Reference:

http://www.gratisexam.com/ QUESTION 33 When configuring the Cisco TelePresence System 500 with IP address, where should the IP address be configured? A. In Cisco Unified Communication Manager after adding the Cisco TelePresence System 500 manually. B. In the Cisco TelePresence Administration tool. C. Static IP address configuration is not possible. Only a DHCP-provided IP address is supported. D. Using the on-screen display E. In the Cisco TelePresence System 500 was added under systems. Correct Answer: E QUESTION 34 When connecting to a pan-tilt-zoom camera to a C-Series codec, what type of cable must be used for camera control? A. An Ethernet crossover cable (RJ-45-to-RJ45) B. A serial cable (DB25-to-DB9) C. A VISCA cable (DB-to-RJ45) D. An Ethernet cable (RJ45-to-RJ45) Correct Answer: C QUESTION 35 You have installed a C-Series in an officer where DHCP in not supported. At a minimum, which four network items must be configured for the endpoint to be able to register with H.323 on a Cisco TelePresence Video Communication Server located at the external headquarters locations? (Choose four) A. Default gateway B. Cisco VCS IPv4 address C. SMTP server IPv4 address D. Subnet mask E. Active Directory IP4address F. Unique IPv4 address Correct Answer: ABDF /Reference: QUESTION 36 Which two of these are considered to be provisioning and scheduling management tools in a Cisco

TelePresence environment? (Choose two) A. Cisco TelePresence Management Suite B. Cisco TelePresence Manager C. Cisco TelePresence Multipoint Control Unit D. Cisco Video Surveillance management Server E. Cisco Video Surveillance Operations Manager Correct Answer: AB QUESTION 37 Refer to the exhibit. What can be deduced from the log shown in the exhibit, which was taken from a Cisco TelePresence Codec C60? "First Test, First Pass" - www.lead2pass.com 34 A. A BFCP call is being initiated B. A direct call to 52902511 is being made

C. A Multi way call to multiway221@os147.local is being made D. No calls are being attempted by the endpoint E. The endpoint is receiving a call from VCS Correct Answer: C QUESTION 38 Which well-known port is used to the access the Cisco IP Video Surveillance Operations Manager via a secure, ActiveX web session? A. 8080 B. 443 C. 421 D. 434 E. 80 F. 20 Correct Answer: B QUESTION 39 In an important Cisco TelePresence video multipoint call is in progress and you are getting complaints of pixilation of the video and poor audio quality on one of the involved systems. Which "First Test, First Pass" - www.lead2pass.com 35 page would be a good place to start for troubleshooting the issue on the affected endpoint?

A. Option A B. Option B C. Option C D. Option D Correct Answer: B

QUESTION 40 In an ISR Cisco Video Management and Storage System, what is the maximum storage capacity allowed per module? A. 850 MB per module B. 2 TB per module C. 750 MB per module D. 500 MB per module E. 3 TB per module F. 1 TB per module Correct Answer: F /Reference: QUESTION 41 Refer to the exhibit. Which system tab can be used to add video infrastructure devices and endpoints? A. System Overview B. Configuration Templates C. Administrative Tools D. Provisioning E. Navigator Correct Answer: D

QUESTION 42 Instructions: To access the multiple-choice question, click on the tab titled "Questions" on the bottom of the panel. Scenario: In this item, you will need to use all information presented to you to successfully answer the question. "First Test, First Pass" - www.lead2pass.com 37 "First Test, First Pass" - www.lead2pass.com 38

The C-Series endpoint (codec) does not register with the Video Communication Server that is located in a different network. Based on the exhibits, what could be causing the issue? A. The subnet mask on the codec is innocent B. The IP address of the codec is incorrect C. The interface that the codec is in the wrong VLAN D. The codec did not receive a DHCP address from the DHCP server Correct Answer: A QUESTION 43 Refer to the exhibit. Which configuration element can be used to specify the Multi way address that can be used by the endpoint to initiate Multi way calls? "First Test, First Pass" - www.lead2pass.com 39

A. Network Services B. SIP Profile 1 C. Conference 1 D. Video E. Provisioning Correct Answer: B QUESTION 44 Which Cisco TelePresence endpoint uses only Cisco Communication Manager as its call control device? A. C60 B. SX20 C. Video Communication Server D. EX90 E. Cisco TelePresence System 500-32

Correct Answer: E QUESTION 45 Which Cisco Video Surveillance product contains the Cisco Video Surveillance Encoding Server? A. Cisco Video Surveillance Operations Manager B. Cisco Video Surveillance Virtual Matrix C. Cisco Video Surveillance Media Server D. Video Communication Server E. Cisco Video Surveillance Transcoding and Encoding Server "First Test, First Pass" - www.lead2pass.com 40 Correct Answer: A QUESTION 46 Refer to the exhibit. Which multipoint feature can be configured using the exhibit that was taken from the Cisco TelePresence Video Communications Server? A. Muliway B. Multiway conference between devices that are registered only to the local Cisco TelePresence Video Communications Server C. both Mutisite and Multiway D. Multisite E. Multisite conference between Cisco Video Jabber for TelePresence device only Correct Answer: B QUESTION 47 Which TelePresence Multipoint Control Unit Layout view mode gives prominence to one conference participant over the other conference participants while still allowing conference participants to view multiple

participants at the same time? A. enhanced continuous presence B. continuous presence C. active speaker D. room switching E. speaker switching Correct Answer: B QUESTION 48 When you register the Cisco TelePresence System 500-32 video system with the Cisco Unified Communication Manager, what is the most important item for the register to be input the server? A. the IP telephone media access control address that is used to manage the system B. the media access control address of the Ethernet port of the Cisco TelePresence System 500-32 "First Test, First Pass" - www.lead2pass.com 41 C. The Cisco TelePresence System 500-32 will always automatically register with the Cisco Unified Communications Manager server. D. the IPv4 address of the Cisco TelePresence System 500-32 Correct Answer: D QUESTION 49 Which two these can cause registration problems for a Cisco TelePresence Code C40 endpoint running in H.323 mode? (Choose two.) A. The E.164 H323Alias has not been configured on the endpoint B. The H.323 license stack is not added to the endpoint. C. The URI address has not been configured on the endpoint. D. The MAC address for the endpoint has not been added to the Cisco TelePresence VCS. E. The IP default gateway address is incorrect for the endpoint. Correct Answer: AE QUESTION 50 Instructions: This item contains one question mat you must answer. You can view this question by clicking on the corresponding button to the left. In order to complete the question, you will need to refer to the scenario, the topology, and the exhibits at the bottom of the screen. Scenario: Refer to the exhibit. Using the information shown, answer the question shown on the Questions tab.

"First Test, First Pass" - www.lead2pass.com 42

"First Test, First Pass" - www.lead2pass.com 43

"First Test, First Pass" - www.lead2pass.com 44

"First Test, First Pass" - www.lead2pass.com 45

"First Test, First Pass" - www.lead2pass.com 46

"First Test, First Pass" - www.lead2pass.com 47

*. indicates required item. **. Device reset is not required for changes to Packet Capture Mode and Packet Capture Duration. ***Note: Security Profit Contains Addition CAPF Settings. ****Note: A Protected device means it is capable of playing Secure and Non-Secure Tones. When the checkbox is checked, the user *****Note: A custom Softkey template without supplementary service Sofkeys must be used for a Hot line Device. "First Test, First Pass" - www.lead2pass.com 48

"First Test, First Pass" - www.lead2pass.com 49

"First Test, First Pass" - www.lead2pass.com 50 "First Test, First Pass" - www.lead2pass.com 51

"First Test, First Pass" - www.lead2pass.com 52

"First Test, First Pass" - www.lead2pass.com 53

When the Cisco Jabber user tries to call extension 3501, Cisco Jabber never places the No errors or messages are seen and no reorder lone is heard. Assuming that the Cisco Jabber calling search space is configured correctly in Cisco Unified Communications Manager, which of these could be causing this issue? A. CTI tor the end user must be enabled. B. Cisco Jabber must be reconfigured tor desktop mode. C. The username or password is misconfigured in Cisco Jabber. D. The Cisco Jabber Advanced Phone Settings are misconfigured. E. Cisco Jabber does not have the correct phone button template and hence has not registered to the Cisco Unified Communications Manager. F. The called user presence status is unknown. G. The called user has not been added as a contact in Cisco Jabber. Correct Answer: E QUESTION 51 What two issues does utilizing an IP network storage solution for IP video surveillance help overcome? (Choose two.) A. faster bit rate for storage B. analog to IP conversion C. large, expandable storage space D. scalability E. physical security Correct Answer: CE

/Reference: QUESTION 52 Which of these involves combining visual elements from separate source into a single image? A. Interlacing B. Video conferencing C. Interleaving D. Compositing Correct Answer: D QUESTION 53 Cisco Video Communication Servers can be clustered to provide resiliency in the enterprise. What is the maximum number of cluster members? A. 2 B. 6 C. 7 D. 3 E. 15 Correct Answer: B QUESTION 54 Refer to the exhibit. When the administrator clicks the ticket number of any of the open tickets, which two actions are presented to the administrator? (Choose two.)

A. ignore ticket B. escalate ticket C. acknowledge ticket D. delete ticket E. close ticket Correct Answer: CD /Reference: QUESTION 55 Cisco Video Surveillance Video Encoder Cards perform which function? A. The ability to use existing equipment with an IP-Enabled video Surveillance system B. The ability to encrypt raw video signals to secure video signals C. The ability to convert low resolution video to high-definition video for video surveillance D. The ability to stream digital media to digital media in an IP-enabled video recording environ Correct Answer: A /Reference: Lead2pass.com was founded in 2006. We provide latest & high quality IT Certification Training Exam Questions, Study Guides, Practice Tests. Lead the way to help you pass any IT Certification exams, 100% Pass Guaranteed or Full Refund. Especially Cisco, CompTIA, Citrix, EMC, HP, Oracle, VMware, Juniper, Check Point, LPI, Nortel, EXIN and so on. Our Slogan: First Test, First Pass. Help you to pass any IT Certification exams at the first try. You can reach us at any of the email addresses listed below. Sales: sales@lead2pass.com Support: support@lead2pass.com Technical Assistance Center: technology@lead2pass.com Any problems about IT certification or our products, you could rely upon us, we will give you satisfactory answers in 24 hours. Our Official: http://www.lead2pass.com http://www.gratisexam.com/