CONNECTIVITY: LAN PRODUCTS Connectivity Overcome the distance limitations of Ethernet with the Patton Model 2158 CopperLink Ethernet Extender. Using a single twisted-pair of voice-grade wire, transparently extend the reach of your network to over 4,500 ft (1,372 m) at 12.5 Mbps. CopperLink Ethernet Extender Patton Model 2158 Standalone and Rack Card T he Model 2158 offers one of the most efficient, reliable, and cost effective solutions for connecting peered 10/100Base-T Ethernet LANs; reaching remote PCs and equipment; or delivering lastmile ISP services all at 12.5 Mbps! The Model 2158 s compact size and connection options make installation easy. The 10/100Base-T Ethernet port is equipped with a shielded RJ-45 jack for connection to an Ethernet hub/switch, PC, or network-enabled device. The CopperLink port is equipped with an RJ-45 jack (optional terminal block is also available) for easy connection to the CopperLink Extenders. For convenient installation, the Model 2158 auto-senses and configures for 10Base-T or 100Base-T as well as full or half-duplex operation. The CopperLink Ethernet Extender, providing high speed Ethernet extension at 12.5 Mbps, is the ideal product for educational facilities, office buildings, multidwelling units, industrial complexes, government agencies, and military installations. If you want to take your network connections farther and faster over existing copper, Patton s CopperLink Ethernet Extenders are the perfect choice. For more information, visit us at www.patton.com. Long-reach High Speed Ethernet Extension Overcome the 328 ft (100 m) limitation of Ethernet with a full-duplex 12.5 Mbps link at distances up to 4,500 ft (1,372 m) Seamlessly Connect and Extend the LAN 802.3 10/100Base-T LAN connection via built-in shielded RJ-45 port Patton CopperLink 2-Wire Connection Easy 2-wire CopperLink connection via built-in RJ-45 port or optional terminal block Auto-sensing Full-Duplex Ethernet Auto 10 or 100Base-T and full or half-duplex Ethernet operation Transparent LAN Bridging Passes higher layer protocols and supports 802.1Q VLAN tagging Automatic Learning, Aging, and Filtering Only allows packets with addresses outside the LAN to be forwarded Link port offers RJ-45 and optional terminal block connections, for easy network connections Auto-sensing 10 or100base-t, and full or half-duplex. Auto MDI-X for direct connection to PC or LAN 2U rack card fits into our 1001R chassis for high density clustering AC or DC power options Front panel indicators show operational status at a glance Model 2158 standalone Installation is a snap with Plug & Play operation Model 2158RC rack card
What does the Model 2158 offer? The Patton Model 2158 offers premium performance on your existing voice-grade wire. With CopperLink technology, fullduplex Ethernet is possible at distances up to 4,500 ft (1,372 m) at 12.5 Mbps. The Model 2158 eliminates the cost and common barriers associated with installing new cable or expensive fiber. Available in compact desktop and rack card configurations Extends the life of your existing copper infrastructure Provides premium performance with minimum investment! Installation s as easy as 1 2 3! Ethernet extension application Features High-speed full-duplex 12.5 Mbps communications link. Extends Ethernet beyond its current 328 ft (100 m) limitation. Works over existing voicegrade telephone wire. Operation transparent to highlayer protocols. Seven status LEDs. Auto-sensing 10 or 100Base-T and full or half-duplex Ethernet. Benefits Fast and reliable data transmission. Inexpensively links remote devices or extends LANs up to 4,500 ft (1,372 m). Eliminates the need to install new LANgrade cable or expensive fiber. Lets higher-layer broadcast, multicast, and data frames pass through. Supports VLAN tagged frames. Monitoring your connection and operational status is made simple. No configuration necessary, just Plug & Play. Used in pairs, the Model 2158 establishes a high speed 12.5 Mbps communications link inter-connecting two geographically separated LANs. Operation is simple: packets destined for the remote LAN are sent transparently, at full line rate, to the peered LAN. Patton s CopperLink Ethernet Extenders are a clearly superior and cost-effective alternative to expensive fiber and media converters, or LAN-grade cable and repeaters. Specifications CopperLink interface Ethernet interface Protocol Transmission Surge suppression Front panel indicators Power supply Compliance Environment Dimensions Weight RJ-45 (pin 4 = tip; pin 5 = ring) and optional two-position removable terminal block (supports 19 26 AWG or 0.9 0.4 mm wire) 8-position shielded RJ45. Auto-sensing 10/100Base-T with half or full-duplex operation Transparent to high layer protocol. Supports 802.1Q VLAN tagging CopperLink line rate: 12.5 Mbps; Data rate: 10 Mbps Full-Duplex CopperLink maximum current surge: 20 ka (8/20 μs) gas tube Power, CopperLink Link and QOL (quality of link), Ethernet Link and Activity status External AC and DC options: AC 120 VAC, 220 VAC, and universal input (UI) 100/240 VAC, or DC 48 VDC, -24 VDC, and -12 VDC FCC Part 15 Class A; EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC; CE Mark Temperature: 32 122 F (0 50 C); Humidity: Up to 90%, non-condensing Standalone: 1.5H x 4.13W x 3.75D in. (3.81H x 10.5W x 9.53D cm); Rack card: 3.0H x 0.83W x 7.84D in. (7.6H x 2.1W x 19.9D cm) Standalone: 0.4 lbs (0.18 kg) without power supply; Rack card: 0.3 lbs (0.14 kg) with rear card
CONNECTIVITY: LAN PRODUCTS Connectivity Overcome the distance limitations of Ethernet with the Patton Model 2168 CopperLink Ethernet Extender. It provides 16 Mbps of Ethernet extension over a single twisted-pair of voice-grade wire. CopperLink Ethernet Extender Patton Model 2168 Standalone and Rack Card The Patton Model 2168 Multi-Rate CopperLink Ethernet Extender enables the utilization of existing copper infrastructure for high speed Ethernet extensions at data rates up to 16.67 Mbps. The 2168 includes seven asymmetrical and symmetrical settings which provide the flexibility to increase the distance or speed of the Ethernet connections. CopperLink applications include Ethernet extension, medical imaging, videoconferencing, Ethernet Bridging, and inter-connecting remote devices or remote networks to a central LAN. The multi-rate symmetrical line rates ensure the highest possible data rate is achieved over various lengths and types of copper wire and environments. Multi-rate asymmetrical line rates make the Model 2168 the ideal solution for service providers who want to differentiate their services or extend the reach of their customer base. The Model 2168 allows service providers to offer unparalleled performance for such applications as always on Internet access, real time bi-directional video streaming, and various multimedia applications. If you want to take your network and voice connections farther and faster over existing copper and eliminate the expense of fiber, Patton s CopperLink Ethernet Extenders are the products for you! Just plug it in, power it on, and play! For more information, visit us at www.patton.com Ethernet Extension Extends 10/100 Base-TX Ethernet distances over 1 mile over 2-wire 24 AWG unconditioned lines Seamlessly Connect and Extend the LAN 802.3 10/100Base-TX LAN connection via built-in shielded RJ-45 port Patton CopperLink 2-Wire Connection Easy 2-wire CopperLink connection via built-in RJ-45 port or terminal block Switch Selectable Asymmetrical or Symmetrical line rates up to 16.67 Mbps! Auto-sensing Full-Duplex Ethernet Auto 10 or 100Base-TX and full or half-duplex Ethernet operation Transparent LAN Bridging Passes higher layer protocols and supports 802.1Q VLAN tagging Automatic Learning, Aging, and Filtering Only allows packets with addresses outside the LAN to be forwarded CopperLink port offers RJ-45 and terminal block connections, for easy network connections Auto-sensing 10 or 100Base-T, and full or halfduplex 2U rack card fits into our 1001R chassis for high density clustering Front panel indicators show operational status at a glance AC or DC power options Seven Asymmetric/Symmetrical Data Rates available via dip switch
Workgroup Ethernet extension application Ethernet Extender allows copper instead of fiber for vertical Ethernet spans! 2168 2168 These multi-rate Ethernet Extenders are ideal for bridging Ethernet spans inside buildings that are beyond the 328- foot (100-meter) distance limit of Ethernet. For example, connecting workgroups located on different floors in a building no longer requires expensive switches or the installation of low capacitance cable. Asymmetrical Line Rates Line Rates Distance in ft (m) Upstream (Mbps) Downstream (Mbps) 2168 1 2 3 1.56 1.56 2.34 4.17 9.38 16.67 6,000 (1,829) 5,500 (1,676) 5,000 (1,524) Symmetrical Line Rates 1001R Line Rates Upstream (Mbps) Downstream (Mbps) Distance in ft (m) 1 2 3 4 6.25 9.38 12.50 16.67 6.25 9.38 12.50 16.67 4,500 (1,372) 4,150 (1,265) 4,000 (1,220) 3,300 (1,006) Specifications CopperLink line interface Ethernet interface Protocol Modulation Duplexing Method Frequency Range Transmission Surge suppression Front Panel Indicators RJ-45 (pin 4 = ring; pin 5 = tip) and two-position removable terminal block (supports 19-26 AWG or 0.9-0.4 mm wire) 8-position shielded RJ-45. Auto-sensing 10/100Base-T with half or fullduplex operation DIP switch capable of disabling 100 Mbps full-duplex for equipment that does not support 802.3X (Pause Packets) Transparent to high layer protocol. Supports 802.1Q VLAN tagging QAM (Quadrature Amplitude Modulation) FDD (Frequency Division Duplexing) CopperLink: 1 8 Mhz CopperLink line rate: Up to 16.67 Mbps; Data rate: Up to 15 Mbps fullduplex CopperLink line maximum current surge: 20kA (8/20µs) gas tube Power, CopperLink and QOL (quality of link), Ethernet Link and Activity Status Power Supply Compliance Environment Dimensions Weight External AC and DC options: 120VAC, and universal input (UI) 100 240 VAC, or optional DC-48 VDC, -24 VDC, and -12 VDC FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC Temperature: 32 122 F ( 0 50 C) Humidity: Up to 90% non-condensing Standalone 1.5H x 4.13W x 3.75D in. (3.81H x 10.5W x 9.53D cm); Rack Card 3.0H x 0.83W x 7.84D in (7.6H x 2.1W x 19.9D cm) Standalone 0.4 lbs (0.18 kg) without power supply; Rack card: 0.3 lbs (0.14 kg) with rear card
CONNECTIVITY: LAN PRODUCTS Connectivity Pa t t o n s CopperLink 2172 breaks both distance and speed barriers with up to 50-Mbps full-duplex and distances of up to 6,000 feet (1,830 meters). Now a single twisted-pair can go the distance without sacrificing speed or cost. CopperLink Ethernet Extender Patton Model 2172 The CopperLink Model 2172 Ultra-High-Speed Ethernet Extender leverages existing copper infrastructure to deliver highspeed Ethernet extension. Providing data rates up to 50 Mbps in each direction for an aggregated full-duplex speed of 100 Mbps, the Model 2172 is the perfect solution for delivering triple-play communications services and other bandwidth-intensive applications. CopperLink Ethernet Extenders easily inter-connect remote devices or remote networks to a central LAN for such applications as medical imaging, video-conferencing, Ethernet bridging, Triple Play, and VoIP. Six user-selectable settings for symmetrical and asymmetrical rates provide the flexibility required to achieve the optimal speed-distance combination for each and every connection. Multi-rate symmetrical line rates allow each connection to be tuned for the length and gauge of the copper wire, in order to achieve the maximum possible data rate for the environment. Multi-rate asymmetrical line rates make the Model 2172 the ideal solution for service providers who want to differentiate their services or extend the reach of their customer base. Get near-fiber performance without the expense with Patton s Ultra High- Speed CopperLink Ethernet Extender! For more information, visit us at www.patton.com. Ethernet Extension Extends 10/100Base-TX Ethernet up to 6,000 feet over 2-wire AWG 26 unconditioned lines. Operates Over Twisted Pair Reduces the cost and hassles of new installations. Utilizes installed voice-grade twisted pairs to eliminate the expense of fiber or Cat5e cabling. Full-duplex data-line rate of 100 Mbps Provides near fiber performance for bandwidth intensive applications such as Triple Play services. Plug and Play No configuration or cable hassles during installation with auto-sensing 10/100, full or half duplex, and auto MDI-X. Multiple Line Rates Supported Switch-selectable lines rates ensure the best possible line rate for each application Asymmetric or symmetric Adapts to service provider and enterprise applications Transparent LAN Bridging Passes higher layer protocols and supports 802.1Q VLAN tagged and untagged traffic RJ-45 CopperLink port Auto-sensing 10/100Base-TX, full or half-duplex, and auto MDI-X switch 100 Mbps throughput over one ordinarygrade twisted-pair Six asymmetric/symmetrical data rates available via DIP switch Front panel indicators show operational status at a glance AC or DC power options Local/Remote switch CopperLink Ethernet Extenders Take your network connections faster and farther over existing voice-grade wire with Patton CopperLink Ethernet Extenders! Max. Distance 1 mile 1.1 miles 0.75 mile 5.7 miles 5.7 miles 5 miles Max. Speed 50 Mbps 16.6 Mbps 12 Mbps 4.6 Mbps 2.3 Mbps 144 kbps Distance at Max. Speed 800 feet 3,125 feet 4,000 feet 2.0 miles 3.1 miles 5 miles CopperLink Model Model 2172 Model 2168 Model 2158 Model 2157 Model 2156 Model 2155 Model 2172
Workgroup Ethernet extension application The Model 2172 multi-rate Ethernet Extenders are ideal for delivering Ethernet links to remote buildings that are beyond the 328-foot (100-meter) distance limit of Ethernet. The 100 Mbps throughput eliminates bandwidth concerns previously experienced with other copper wired transmission technologies. By utilizing existing voice grade copper pairs the expense and hassle of installing low capacitance or fiber cable is no longer required. Extend 10/100Base-TX Ethernet to reach beyond its natural limitations Remote Office Up to 6,000 feet (1,830 meters) over voice-grade twisted-pair Main Office Asymmetrical Line Rates Line Rates (AWG 24/0.5 mm) Upstream in Mbps 1 1 2 Downstream in Mbps 4 16 50 Distance in ft (m) 6,000 (1,830) 4,000 (1,200) 2,000 (610) EnviroNET models also available Symmetrical Line Rates Line Rates (AWG 24/0.5 mm) Upstream in Mbps 10 25 50 Downstream in Mbps 10 25 50 Distance in ft (m) 4,000 (1,200) 2,000 (610) 800 (245) Specifications* CopperLink line interface Ethernet interface Protocol Modulation Duplexing Method Frequency Range Transmission Surge suppression RJ-45 (pin 4 = ring; pin 5 = tip) 8-position shielded RJ-45. Auto-sensing 10/100Base-T with half or fullduplex operation. DIP switch capable of disabling 100-Mbps full-duplex for equipment that does not support 802.3X (Pause Packets) Transparent to high layer protocol. Supports 802.1Q VLAN tagging (Quadrature Amplitude Modulation) QAM 4-band FDD (Frequency Division Duplexing) CopperLink: 0 12 MHz CopperLink line rate: Up to 50 Mbps CopperLink line maximum current surge: 20kA (8/20µs) gas tube Front Panel Indicators Power Supply Compliance Environment Dimensions Weight Power, Link, Ethernet External AC and DC options: 120VAC, and universal input (UI) 100 240 VAC, or optional -48 VDC, -24 VDC, or -12 VDC FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC Temperature: 32 122 F ( 0 50 C) Humidity: Up to 90% non-condensing 1.5H x 4.13W x 3.75D in. (3.81H x 10.5W x 9.53D cm) 0.4 lbs (0.18 kg) without power supply *Specifications are subject to change.
Connectivity: LAN PRODUCTS Reach your remote LAN with Patton s Auto-Rate Ethernet Extenders and get the best speed/distance combination in the industry using just a single twisted-pair. Connectivity CopperLink Ethernet Extender Patton Models 2156 and 2157 L AN extension doesn t have to be expensive or difficult. Patton s Model 2156 and Model 2157 series of auto-rate Ethernet Extenders open the door to lowcost and easy set-up LAN extension. The 2156 and 2157 series LAN Extenders are easy to use and take advantage of the existing copper twisted-pair infrastructure to connect LAN s at high speed and long distances. The Model 2156 can connect at speeds up to 2.3 Mbps with distances ranging from 5.3 to 9.4 Km (17,000 to 30,000 ft) on standard 0.5 mm (24AWG) voice grade twisted pair. While the Model 2157 can connect at speeds up to 4.6 Mbps with distances ranging from 3.3 to 9.4 Km (17,000 to 30,000 ft) on the same twisted pairstandard 0.5 mm (24AWG) again on just a single twisted pair. Whether it s connecting corporate LAN s or remote offices, these Ethernet Extenders are the simple solution to ensure the best combination of speed and distance in the industry. Many LAN extender s are set for a single rate, or require difficult configurations in order to connect LAN s at different distances. With their auto-rate adaptation feature, the model 2156 and Model 2157 CopperLink Ethernet Extenders ensure that users get the highest speed possible for the distances they are trying to reach. To make it even more simple to use, these Auto-rate Ethernet Extenders come with a built in MDI-x switch to allow easy connection to either LAN s or PC s with no need for worrying about whether a cross-over cable is needed or not. Set-up is as simple as connecting the Ethernet port, connecting the copper twisted pair, and powering up the units! The Patton CopperLink Auto-rate Ethernet Extenders are the perfect fit for cost-effective simple and efficient LAN extension! High-Speed Extension With the Model 2157 get speeds up to 4.6 Mbps and with the Model 2156 get speeds up to 2.3 Mbps. Auto-rate Selection Just plug the units in, and they will determine the maximum rate possible for the connection. CopperLink 2-Wire Connection Easy 2-wire CopperLink connection via built-in RJ-11 port Auto-sensing Ethernet Auto 10 or 100Base-T and full or half-duplex Ethernet operation Transparent LAN Bridging Passes higher layer protocols and supports 802.1Q VLAN tagging Automatic Learning, Aging, and Filtering Only allows packets with addresses outside the LAN to be forwarded Only a single twisted pair needed for speeds up to 4.6 Mbps
Competitive Positioning Patton s CopperLink Auto-Rate Ethernet Extenders are the perfect fit for simple, cost effective high-speed Ethernet Extension. They allow customers to take advantage of the existing copper infrastructure to connect remote LAN s across distances and at speeds previously unthought-of. The auto-rate feature ensures the highest speed is achieved on each connection, and the plug-n-play operation ensures they are up and running in seconds. Add in the auto-sensing full/half duplex 10/100Base-T ethernet port and the integrated crossover switch to make setup even easier, and the value of these Ethernet Extenders can t be beat! Auto-Rate Feature The advanced auto-rate algorithm automatically determines the best possible rate for each connection and sets up each extender without any need for user interface. Plug-and-Play Just unpack the extenders, plug them in to each end of the extension, power them up, and they are up and running. It doesn t get any easier! High-Speed/Long Reach These CopperLink Ethernet Extenders provide the best combination of speed and distance seen anywhere in the industry! Application Example: Corporate Campus LAN Extension V.35 X.21 Now there is an easier, lower-cost method to connect your remote LANs. Use Patton s Twisted PairDSL modems to port your existing router functionality over 2-wire DSL to your remote LAN. It saves time and money by eliminating the need for an extra router at the remote site and eliminates the Twisted headaches of setting up an extra router. Pair Patton s DSL modems combine Ethernet, Remote Router Porting and DSL into a single compact desktop unit. The Auto-rate feature ensures that the best combination of speed and distance is achieved for each LAN extension Specifications Protocol: Transparent to higher layer protocols. Supports 802.1 Q VLAN tagged packet transmission CopperLink Interface: RJ-11 connector (pin 2 = Ring pin 3 = Tip) Single twisted pair Ethernet Interface: 8-position shielded RJ-45, auto-sensing 10/100Base-T, Full/Half duplex operation Line Rates: Auto-Rate adaptive from 192 kbps to 4.6 Mbps Model 2157 Auto-Rate adaptive from 192 kbps to 2.3 Mbps Model 2157 Surge Suppresion: CopperLink maximum current surge: 20 ka (8/20 ms) gas tube DTE Rates: All 64k steps from 192 kbps to 4608 kbps Line Coding: TC-PAM LED Status Indicators: WAN: Link, TD, RD, Ethernet: Link, 10/100, TD, RD, Power Connectors: RJ-11 on copper line side, RJ-45 for Ethernet connection, shrouded male IEC320 power connector; Power: External 100 240 VAC, 50-60 Hz (Universal Input), 10 W. external 40 60 VDC, 10W (DC option ordered separately) Line Interface: Transformer coupled, 1500VAC isolation. Compliance: FCC Part 15, FCC Part 68, CE Mark per EMC directive 89/336/EEC and Low Voltage Directive 73/23/EEC, UL1950 and cul Listed, CE Mark, Canadia CS-03, CTR12, CTR13 Temperature Operating temperature, 32 122 deg F ( 0 50 deg C.) Humidity 5 95 %, non-condensing Altitude 0 15,000 feet ( 0 4600 m). Dimensions: 7.3 x 6.6 x 1.62 (185mm x 168mm x 41mm), 2.0 lbs (1.0 kg) Weight: Individual Unit: 0.5 lbs (0.2 kg), Boxed Unit: 2.1 lbs (0.9 kg)