Drive Technology \ Drive Automation \ System Integration \ Services NEW: MOVI-C Modular automation system
2 MOVI-C modular automation system NEW: MOVI-C Modular automation system MOVI-C is SEW-EURODRIVE s all-in-one solution for automation control. Whether you're implementing single-/multi-axis applications, complex motion control, or full automation systems, MOVI-C provides the control and flexibility you need. SEW-EURODRIVE delivers automation components including drive technology, electronic control components, and engineering software all from a single source. Plus, you get the reliability and quality you ve come to expect from more than 85 years of engineering expertise. MOVI-C combines: MOVISUITE engineering software MOVI-C controllers Inverter technology Drive technology
3
4 MOVISUITE MOVISUITE Engineering software MOVISUITE is intuitive engineering software that sets a new standard for single and multi-axis motion control. Project planning, startup, operation, and diagnostics are quick and easy saving you time and money.
5 Features of the MOVISUITE standard Startup and parameter setting for MOVIDRIVE frequency inverters Easy to use for complex or simple applications Interactive design for a short learning curve Intuitive inverter functions like manual operation and startup of the drive train Configuration and IEC programming for MOVI-C CONTROLLERs Parameter setting and diagnostics for MOVIKIT modules Data management Project management Network scan of connected units Scope function Electronic catalog for SEW-EURODRIVE products Comprehensive context-sensitive help function
6 MOVI-C CONTROLLER MOVI-C CONTROLLER The combination of the MOVI-C CONTROLLER, the MOVIKIT modules, and MOVIRUN software provides a flexible, easy to use platform that saves time and money. MOVI-C control technology is available in four different performance classes power, power eco, advanced and standard. Features include an intuitive user interface, plus backup and restore functions that make axis replacement simple.
7 Hardware Performance class MOVI-C CONTROLLER standard Performance class MOVI-C CONTROLLER advanced Performance class MOVI-C CONTROLLER power eco Performance class MOVI-C CONTROLLER power Features and equipment Centralized data management Links to all standard control systems High performance and user-friendly Auto reload function for axis replacement Startup MOVIRUN software platform modules for parameter setting and programming Operation MOVIKIT modular software system includes function blocks for speed control, positioning, robotics, electronic cam, and mechanically coupled axes Routing from PROFIsafe to the axis modules 1 x ETHERNET (10/100 BaseT) for engineering or TCP/IP and UDP using IEC 61131-3 1 x EtherCAT / SBus PLUS master 1 x CAN, non-isolated PROFINET slave, EtherNet/IP TM slave, Modbus TCP/IP slave Status display for PLC and fieldbus SD memory card 2 interpolating axes 6 auxiliary axes 2 x CAN, 1 electrically isolated 1 x RS485 PROFINET slave, EtherNet/IP TM slave, Modbus TCP/IP slave Status display for PLC and fieldbus Optional master module, can be added to MOVIDRIVE modular SD memory card 8 interpolating axes 8 auxiliary axes PROFINET slave, EtherNet/IP TM slave, Modbus TCP/IP slave CFast memory card 2 GB 16 interpolating axes 16 auxiliary axes PC-based PROFINET slave, EtherNet/IP TM slave, Modbus TCP/IP slave 7 x USB 2.0 CFast memory card 2 GB 32 interpolating axes 32 auxiliary axes Optional 2nd Windows 7 embedded operating system using Hypervisor technology for integrated visualization PC-based
8 MOVIRUN, MOVIKIT MOVIRUN and MOVIKIT Control technology software Simple application control Software MOVIRUN The software platform for MOVI-C CONTROLLERs MOVIKIT The modular software system for MOVI-C CONTROLLERs Features and equipment Startup with MOVIRUN Automation with MOVI-C and third-party components Interpolated operating modes for demanding motion control applications State-of-the-art programming system (IEC 61131) Prefabricated software modules from the MOVIKIT modular software system can be integrated into the user program MOVIRUN smart, the intelligent, parameterizable motion control platform Parameter setting instead of programming Prefabricated software modules from the MOVIKIT modular software system can be easily connected to higher-level controllers via fieldbus interface No additional programming work Functionality documentation Operation with MOVIKIT for simple to complex motion control functions Graphic configuration and diagnostics Available for MOVIDRIVE technology, MOVIRUN smart is available as a parameterizable solution with fieldbus connection, and MOVIRUN flexible is available for integration in the IEC program with user-friendly IEC interface Modules: MOVIKIT Velocity, Positioning MOVIKIT MultiMotion, MultiMotion Camming MOVIKIT MultiAxesController MOVIKIT Robotics Benefits Advanced functionality with a user-friendly interface Choose between parameter setting or programming Parameter setting: - Startup shortened by standardized software modules - Only parameters required for the application need to be entered - Guided parameter setting instead of complex programming
9 MOVIKIT modular software system Gearing Camming MAC
10 MOVIDRIVE MOVIDRIVE Inverter technology Flexible motor control MOVIDRIVE inverters control and monitor synchronous, asynchronous and linear motors with or without an encoder. They are available as a modular multi-axis system with single- and double-axis modules up to a rated current of 180 A, and as a compact unit with mains connection up to a rated output of 315 kw. The basic unit incorporates the STO in PLe safety function, and safety option cards add more than 15 safety functions. In addition to easy startup and energy-saving operation, custom applications can be implemented quickly and easily using MOVIKIT modules.
11 MOVIDRIVE modular MOVIDRIVE system MOVIDRIVE technology Features and equipment An inverter series for all motors operation of Synchronous and asynchronous AC motors with/without encoder Asynchronous motors with LSPM technology Synchronous and asynchronous linear motors Easy startup using electronic nameplate or electronic catalog Startup of unknown motors using calibration function Energy-saving functions for partial-load operation and standby mode Compact multi-axis system consisting of power supply modules, regenerative power supply modules and single- and double-axis modules Multi-encoder input in the basic unit EtherCAT /SBus PLUS in the basic unit Up to 30 drives on one power supply module Up to 800m motor cable length State-of-the-art control modes for optimum control performance Can be used in TN, TT and IT systems IP20 protection in all sizes Control via MOVI-C CONTROLLER Single-axis unit with own mains connection Perfect addition to the multi-axis system for high motor power ratings or long cable runs Multi-encoder input in the basic unit EtherCAT /SBus PLUS in the basic unit Up to 1200 m motor cable length Newest control modes for optimum control performance Can be used in TN, TT and IT systems IP20 protection in all sizes Control via MOVI-C CONTROLLER Single-axis unit with own mains connection and direct fieldbus connection via pluggable fieldbus interfaces Startup via pluggable operator panels or engineering software Integrated memory card to back up device data Integrated DC 24 V switched-mode power supply Integrated safety technology MOVISAFE STO in PLe safety function integrated in the basic unit Safe communication via PROFINET/PROFIsafe Safety functions on the MOVISAFE safety option card Simple startup by entering parameters Fully integrated diagnostics and scope functions High-quality safety functions: SS1, SS2, SOS, SLS, SSR, SSM, SLI, SLA, SDI, SBC Explosion protection Compatible with explosion-proof motors
12 MOVIDRIVE MOVIDRIVE Inverter technology Technical data MOVIDRIVE modular MOVIDRIVE system MOVIDRIVE technology Nominal voltage V 3 x AC 380 500 3 x AC 200 240 3 x AC 380 500 3 x AC 200 240 3 x AC 380 500 Rated output power supply module kw Nominal output current single-axis module A Nominal power kw Nominal output current double-axis module A 10 110 2 180 0.55 315 0.55 315 2 8 Overload capacity 250% 200% 200% Options Operator panels Encoder interfaces for motor and distance encoders PROFINET fieldbus connections, Modbus TCP/IP, EtherNet/IP TM, EtherCAT, EtherCAT CiA402, PROFIBUS, DeviceNet TM, PROFIsafe via PROFIBUS / PROFIsafe via PROFINET Extension for inputs and outputs Regenerative power supply Braking resistors Line choke Line filters Output chokes Output filters Single-cable technology Data interface between inverter and drive for transferring Safe and non-safe encoder data Motor temperature Switching status of brake and brake wear Features Robust data interface Cable lengths up to 200m Asynchronous and synchronous motors One hybrid cable for motor power, brake control and data Fully integrated digital motor encoders
13
14 Drive technology Drive technology Motion solutions MOVI-C control technology works with a wide range of gearmotors and servo drives in various sizes and torque ratings. Linear motors, electric cylinders, brakes, built-in encoders and diagnostic units are also compatible. NEW: Motor with single-cable connection for power and encoder feedback Overview Standard and servo gear units Five standard gear unit series One-, two- and three-stage helical gear units, R series: 440 159,300 lb-in output torque Two- and three-stage parallel-shaft helical gear units, F series: 1,150 159,300 lb-in output torque Two- and three-stage helical-bevel gear units, K series: 710 442,500 lb-in output torque Two-stage helical-worm gear units, S series: 820 35,400 lb-in output torque One- and two-stage right-angle gear units, W series: 220 1,590 lb-in output torque Two servo gear unit series Low backlash planetary servo gear units from the PS.F series: 220 26,500 lb-in nominal torque PS.C: 265 2,830 lb-in nominal torque Low backlash helical-bevel servo gear units from the BS.F series: 350 10,600 lb-in nominal torque Motors DR.. series AC motors (1 speed), 2-, 4- and 6-pole Pole-changing DR.. series AC motors (2 speeds) cover outputs from 0.09-225 kw (.12-300 hp) and energy efficiency classes from IE1 to IE4 Also available: Torque motors, single-phase motors, and aseptic motors and motors with explosion protection Synchronous and asynchronous servomotors for high dynamic requirements, also with explosion protection linear motors and electric cylinders Combined with an extensive range of brakes, encoders, plug connectors, cooling fans, special coatings and surface treatments, the modular system offers you the perfect drive for your application.
15
Drive Technology \ Drive Automation \ System Integration \ Services 2309 0510US / 0317 U.S. Operations Southeast Region (U.S. Headquarters) SEW-EURODRIVE, Inc. 1295 Old Spartanburg Hwy. Lyman, SC 29365 P: (864) 439-7537 F: (864) 439-7830 cslyman@seweurodrive.com Midwest Region SEW-EURODRIVE, Inc. 2001 West Main St. Troy, OH 45373 P: (937) 335-0036 F: (937) 332-0038 cstroy@seweurodrive.com Northeast Region SEW-EURODRIVE, Inc. 2107 High Hill Rd. Bridgeport, NJ 08014 P: (856) 467-2277 F: (856) 845-3179 csbridgeport@seweurodrive.com Southwest Region SEW-EURODRIVE, Inc. 3950 Platinum Way Dallas, TX 75237 P: (214) 330-4824 F: (214) 330-4724 csdallas@seweurodrive.com Western Region SEW-EURODRIVE, Inc. 30599 San Antonio St. Hayward, CA 94544 P: (510) 487-3560 F: (510) 487-6433 cshayward@seweurodrive.com Industrial Gears SEW-EURODRIVE, Inc. 148 Finch Rd. Wellford, SC 29385 P: (864) 439-8792 F: (864) 661-1167 igssorders@seweurodrive.com seweurodrive.com