Optoelectronics Prisma II 1550 nm Amplifiers Description The Prisma II optical network is an advanced transmission system designed to optimize network architectures and increase reliability, scalability, and cost effectiveness. Prisma II 1550 nm Amplifiers offer a wide range of configurations and output powers for the ultimate in network architecture flexibility. The Prisma II Amplifiers are available as single modules with various output options or as configured amplifier systems with a pre-amplifier and a corresponding amplifier module. Additional post-amplifier modules can be designed in for greater routing capabilities. Gain Flattened 1550 nm Gain Flattened The Prisma II Gain Flattened Erbium Doped Fiber Amplifier () is designed for use in multiple wavelength systems. This highly versatile maximizes system performance and flexibility by providing automatic gain control (AGC) while maintaining gain flatness for up to 40 wavelengths. The Prisma II Gain Flattened gives the user the flexibility to select between having constant composite output power or having constant gain per wavelength. Single The Prisma II Amplifiers offer a broad range of output powers in standalone modules. Operating over a wide range of input powers from a Prisma II 1550 nm Transmitter or another 1550 nm Amplifier upstream, the amplifier modules provide reliable, high-performance transmission of voice, video, and data signals for all optical networking needs. Configurable Amplifier System The configurable system consists of one high-power 8 x +17 m pre-amplifier module and one post-amplifier module. The post-amplifier module is available with various number of output port and power output options. For flexibility in network expansion, add-on post-amplifier modules can be added to the configurable system. 1550 nm Amplifier Single-Wide Module Add-On Post- Up to seven (7) additional post-amplifier modules can be used with the configurable system for outstanding network expansion capabilities. Post-amplifier modules require the high optical input provided by the pre-amplifier modules of the configurable system. 1550 nm Configurable Amplifier System
Prisma II 1550 nm Amplifiiers Prisma II 1550 nm Gain Flattened Description The Prisma II Gain Flattened Erbium Doped Fiber Amplifier is designed for use in multiple wavelength systems. This highly versatile maximizes system performance and flexibility by providing automatic gain control (AGC) while maintaining gain flatness for up to 40 wavelengths. The Prisma II Gain Flattened gives the user the flexibility to select between having constant composite output power or having constant gain per wavelength. Designed to work in the industry s first Carrier Class platform, the Prisma II Gain Flattened provides the features, functions, and reliability demanded by today and tomorrow s DWDM networks. Applications DWDM System Architectures Metro WAN Networks Long-Haul transport Prisma II 1550nm Gain Flattened Features Constant Gain Per Wavelength DWDM Amp Input Wavelength Range 1530 nm 1565 nm Excellent Gain Flatness of +/- 0.5 For use in multi-wavelength DWDM systems (1 to 40 wavelengths) Low optical input power per wavelength 17 m and 20 m nominal composite output power models available Low noise figure: 5 Multiple set-up and control options: Intelligent Communications Interface Module (ICIM) Local Craft Interface (LCI) 2
Prisma II 1550 nm Amplifiiers Prisma II 1550nm Gain Flattened Specifications Units 17 m Gain- Flattened 20 m Gain-Flattened Notes Wavelength Range nm 1530-1565 1530-1565 1 Spectral Flatness ± 0.5 ± 0.5 2 Operational Input Power Range m -22 to +6-22 to +6 3 Noise Figure 5.0 typical 5.0 typical Output Power m 17 Maximum 20 Maximum Maximum Signal Gain Per Channel 23 Maximum 26 Maximum Return Loss >50 >50 Power Stability ± 0.2 ± 0.2 Connector Options SC/APC Standard Standard Electrical Units 17 m Gain- 20 m Gain-Flattened Notes Flattened Power Consumption (maximum) W DC 30 30 Temperature Range Operational Full Specification C F C F -40 to +65-40 to +149-20 to +65-4 to +149-40 to +65-40 to +149-20 to +65-4 to +149 Humidity Range % 0 to 95 0 to 95 4 Mechanical Units 17 m Gain- Flattened 20 m Gain-Flattened Physical Dimensions Depth 9.8 9.8 24.9 24.9 Width 2.1 2.1 5.3 5.3 Height 7.6 7.6 19.3 19.3 Weight lb 3.5 3.5 kg 1.6 1.6 Module Width Slots 2 2 Notes Notes: 1. Scientific-Atlanta guarantees specifications over the wavelength range of 1530 nm 1562 nm, which is consistent with our offering of multi-wavelength systems up to 40 channels. Amplifier is operational to 1565 nm. 2. ± 0.5 from -20 C to +50 C; ± 0.7 from -40 C to +65 C 3. The amplifier s spectral flatness is guaranteed for composite input powers between -6 m and +6 m. For a 40 channel system, a -6 m composite input power would equate to -6 m-20log(40)= -22 m per wavelength. Amplifier will operate with single or multiple wavelength loading as low as -25 m composite but performance is not guaranteed. 4. Non-condensing environments 3
Prisma II 1550 nm Amplifiiers Prisma II 1550 nm Gain Flattened Ordering Information Sample P 2 - E D F A - M O D - G F - 1 x 2 0 - S A P 2 - E D F A - M O D - G F - 1 x 2 0 - Platform Product 1550nm Amplifier Configuration Module MOD Gain-Flattened Specification GF Connector Type SC/APC Total Output Power 1 port, +17m 1 port, +20m 1x17 1X20 SA FA E2 Prisma II products include the industry s most complete range of high performance optical components: For more information please refer to: Platform Prisma II Data Sheet Part Number 739199 1310 nm Transmitters Prisma II Data Sheet Part Number 739200 1550 nm Transmitters Prisma II Data Sheet Part Number 739201 Receivers Prisma II Data Sheet Part Number 739203 Ancillary Modules Prisma II Data Sheet Part Number 739205 bdr Digital Reverse 2:1 Multiplexing System Prisma II Data Sheet Part Number 744484 4
Prisma II 1550 nm Amplifiiers Single, Configurable Amplifier System, Add-On Post- Single The Prisma II Amplifiers offer a broad range of output powers in stand-alone modules. Operating over a wide range of input powers from a Prisma II 1550 nm Transmitter or another 1550 nm Amplifier upstream, the amplifier modules provide reliable, high-performance transmission of voice, video, and data signals for all optical networking needs. Configurable Amplifier System The configurable system consists of one high-power 8 x +17 m pre-amplifier module and one post-amplifier module. The post-amplifier module is available with various number of output port and power output options. For flexibility in network expansion, add-on post-amplifier modules can be added to the configurable system. Add-On Post- Up to seven (7) additional post-amplifier modules can be used with the configurable system for outstanding network expansion capabilities. Post-amplifier modules require the high optical input provided by the pre-amplifier modules of the configurable system. 1550 nm Amplifier Single-Wide Module Features Designed to operate within the Prisma II platform Single amplifier modules with various output power and number of output port options Configurable amplifier system with one pre-amplifier and added amplifier modules - Various number of output port options for both pre-amplifier and modules - Ultra-high output power potential Nonvolatile storage of pre-set operating parameters simplifies installation procedures Master / Slave Redundancy Multiple set-up and control options - Local control via Local Craft Interface (LCI) - Local control via Intelligent Communications Interface Module (ICIM) - Remote monitoring via Transmission Networks Control System (TNCS) 1550 nm Configurable Amplifier System 5
Prisma II 1550 nm Amplifiiers Single, Configurable Amplifier System, Add-On Post- Single-Wide and Post- Input Gain Stage Output (1 or 2 outputs) Pump Control ELectronics ICIM Front Panel (optional module) Microprocessor LCI User Interface Connector (on chassis) Double-Wide Input Gain Stage Outputs Pump Control ELectronics ICIM Front Panel (optional module) Microprocessor LCI User Interface Connector (on chassis) Triple-Wide Modules Outputs Input Gain Stage Outputs Pump Control ELectronics ICIM Front Panel (optional module) Microprocessor LCI User Interface Connector (on chassis) 6
Prisma II 1550 nm Amplifiiers Single, Configurable Amplifier System, Add-On Post- Specifications Units Configurable System 1 Notes Output Power @ > 0.0 m 2 input m m m m m m Single-Wide Modules +13 minimum +16 minimum +17 maximum +20 minimum 2 outputs @ +17 out of max port 2 outputs @ +19 out of min port +24 maximum 2 outputs @ +21 out of max port 4 outputs @ +17 out of max port m m Double-Wide Modules 1 output @ +24 out of max port 2 outputs @ +21 out of max port 4 outputs @ +17 out of max port Triple-Wide Modules 4 outputs @ +20 out of max port 8 outputs @ +17 out of max port Wavelength nm 1530 1567 1530-1567 Return Loss > 50 > 50 Operational Input Power Full Specs Functional Port-to-Port Output Power Uniformity Single Output Dual Output 4 Output 8 Output Noise Figure @ +5.0 m input +13 to +17 Single Port +20 m Single Port 2 x +17 Output 4 x +17 Output 2 x +21 Output 4 x +20 Output 1 x +24 Output 8 x +17 Output m m > 0 > -10 N/A 0.3 1.0 1.0 5.0 typical As provided by the pre-amplifier Power Stability ± 0.2 ± 0.2 Connector Options SC/APC Standard Standard N/A 0.3 1.0 N/A for all outputs 3 Electrical Units Configurable System Notes Power Consumption 45 pre-amplifier (maximum) 15 each post-amplifier Temperature Range Operational and Full Specs W DC W DC W DC 15 single wide module 30 double wide module 45 triple wide module C -40 to +65-40 to +65 F -40 to +149-40 to +149 Humidity Range % 0 to 95 0 to 95 5 4 7
Prisma II 1550 nm Amplifiiers Single, Configurable Amplifier System, Add-On Post- Specifications, continued Mechanical Units Single-Wide Modules Double-Wide Modules Triple-Wide Modules Notes Physical Dimensions Depth Width Height Weight Module Width lb. kg slots 9.8 24.9 1.0 2.5 7.6 19.3 2.25 1.0 1 9.8 24.9 2.1 5.3 7.6 19.3 3.5 1.6 2 9.8 24.9 3.2 8.1 7.6 19.3 4.0 1.8 3 Notes: 1. Specifications are for the output of the Configurable System (triple-wide pre-amplifier modules plus single-wide post-amplifier module) and the output of all additional post-amplifier modules added to the system. 2. Contact Applications Engineering for performance at other input power levels. 3. Noise figure for the Configurable System requires +5.0 m input into the pre-amplifier stage and is through any pre/postamplifier combination. 4. connectors will have the narrow alignment key width at 2.05 mm. 5. Recommended for use only in non-condensing environments. Unless otherwise noted, specifications are based on measurements made in accordance with NCTA Practices for Measurements made on Cable Television Systems using standard frequency assignments and are referenced to the ambient air temperature at the inlet to the Prisma II chassis. 8
Prisma II 1550 nm Amplifiiers Single, Configurable Amplifier System, Add-On Post- Ordering Information Sample P 2 E D F A M O D 1 x 1 6 S A P 2 E D F A M O D Platform Connectors Product 1550 Amplifier Module Configuration MOD SC/APC* * Standard connector SA FA E2 Power Configurable Amplifier Systems 1 Port, +13 m 1 Port, +16 m 1 Port, +17 m 1 Port, +20 m 1 Port, +24 m 2 Ports, +17 m 2 Ports, +19 m 2 Ports, +21 m 4 Ports, +17 m 4 Ports, +20 m 8 Ports, +17 m 1x13 1x16 1x17 1x20 1x24 2x17 2x19 2x21 4x17 4x20 8x17 Note: Order Configurable Amplifier System by the output of the Post-Amplifier Module. Sample P 2 E D F A C O N 1 x 2 4 S A P 2 E D F A C O N Platform Connectors Product 1550 Amplifier Configuration Configured CON SC/APC* * Standard connector SA FA E2 Power 1 Port, +24 m 2 Ports, +21 m 4 Ports, +17 m 1x24 2x21 4x17 9
Prisma II 1550 nm Amplifiiers Single, Configurable Amplifier System, Add-On Post- Ordering Information, continued Post- Sample P 2 E D F A P S T 1 x 2 4 S A P 2 E D F A P S T Platform Connectors Product 1550 Amplifier Configuration Post-Amplifier Module Only PST SC/APC* * Standard connector SA FA E2 Power 1 Port, +24 m 2 Ports, +21 m 4 Ports, +17 m 1x24 2x21 4x17 Prisma II products include the industry s most complete range of high performance optical components: For more information please refer to: Platform Prisma II Data Sheet Part Number 739199 1310 nm Transmitters Prisma II Data Sheet Part Number 739200 1550 nm Transmitters Prisma II Data Sheet Part Number 739201 Receivers Prisma II Data Sheet Part Number 739203 Ancillary Modules Prisma II Data Sheet Part Number 739205 bdr Digital Reverse 2:1 Multiplexing System Prisma II Data Sheet Part Number 744484 Scientific-Atlanta, the Scientific-Atlanta logo, and Prisma are registered trademarks of Scientific-Atlanta, Inc. Prisma II and bdr are trademarks of Scientific-Atlanta, Inc. Specifications and product availability are subject to change without notice. 2005 Scientific-Atlanta, Inc. All rights reserved. Scientific-Atlanta, Inc. 1-800-722-2009 or 770-236-6900 www.scientificatlanta.com Part Number 739202 Rev H June 2005 10