Release 7 (C) Component Versions This release comprises the following versions: Main Application DK0439 02.00.04 EBOOT Loader DK0437 02.01.01 Operating System DK0438 02.01.01 Changes SINCE LAST VERSION DK0439 Fix for 10V source calibration failure on first try from power on. Applicability of new issue 7 th October 2015 Page 1 of 7 DPI611 SR0112 Software release history @ 01 April 2016
RELEASE 6 (B) COMPONENT VERSIONS Released via SAP, software release version changes numeric to Alpha from this point onwards, with old numeric release shown in brackets. Main Application DK0439 V02.00.03 BOOT Loader DK0437 V02.01.01 Operating System DK0438 V02.01.01 Combined boot loader and operating system binary image DK0451 V01.05.02 CHANGES SINCE LAST VERSION Add interface to the rechargeable battery. Tracker no. 406111: Fix for Channel 1 sporadic calibration failure. APPLICABILITY OF NEW ISSUE INSTALLATION DK0451 DK0451 is the combined binary image of DK0437 and DK0438 (branched at 01.05.01 and modified in 01.05.02 to allow either DPI611 or DPI612 installation) and is flashed to NAND by third party suppliers when the DPI611 main board is built; it cannot be user installed. DK0451 supersedes DK0433 (the original combined image of DK0437 and DK0438 used for DPI611. DK0437, DK0438 and DK0439 These DKs can be installed by the user using the normal upgrade process as follows: Copy the Amc directory contained in the installation to the root directory of a USB stick. Insert the stick into the unit. Power on the unit and wait until the DASHBOARD is displayed. Select SETTINGS, then ADVANCED, then enter the pin number 5487. Press the tick at the bottomright of the screen. From the UPGRADE menu select APPLICATION and when asked to Confirm Upgrade select Yes. Power down the unit. Power up the unit; the new software will install and, when finished, the unit will boot up to thedashboard. Select SETTINGS, then STATUS, then SOFTWARE BUILD. Observe that the APPLICATION version has been upgraded. RELEASE DATE 11 th SEPTEMBER 2015 Page 2 of 7 DPI611 SR0112 Software release history @ 01 April 2016
Release 5 (A) Component Versions Released via SAP, software release version changes numeric to Alpha from this point onwards, with old numeric release shown in brackets. Main Application DK0439 V01.04.00 EBOOT Loader DK0437 V01.07.00 Operating System DK0438 V01.07.00 Combined DK0437 and DK0438 Binary Image DK0433 V01.05.01 Changes SINCE LAST VERSION Tracker no. 405543: Fixes for Intecal procedure range and tolerance errors. Applicability of new issue Installation DK0433 DK0433 is the combined binary image of DK0437 and DK0438 and is flashed to NAND by third party suppliers when the DPI611 main board is built; it cannot be user installed. DK0437, DK0438 and DK0439 These DKs can be installed by the user using the normal upgrade process as follows: Copy the Amc directory contained in the installation to the root directory of a USB stick. Insert the stick into the unit. Power on the unit and wait until the DASHBOARD is displayed. Select SETTINGS, then ADVANCED, then enter the pin number 5487. Press the tick at the bottom right of the screen. From the UPGRADE menu select APPLICATION and when asked to Confirm Upgrade select Yes. Power down the unit. Power up the unit; the new software will install and, when finished, the unit will boot up to the DASHBOARD. Select SETTINGS, then STATUS, then SOFTWARE BUILD. Observe that the APPLICATION version has been upgraded. 31 th July 2015 Page 3 of 7 DPI611 SR0112 Software release history @ 01 April 2016
RELEASE 4 Component Versions DPI611 Main Application DK0439 V01.03.06 https://openge.ge.com/svn/dpi611/tags/release_11 All software is programed into the on board NAND flash. DK0433 is a prerequisite of DK0439 and should be installed first (see section 0.) Once a board has been programed with DK0433 it is possible for the board to self-program; this method is used for all upgrades. Tracker no. 399382 - Additional functionality to check the battery polarity. Tracker no. 399383 Add Fixed Pressure Sensor + IDOS functionality. Tracker no. 400510 - Fix for calibration failures on Channel 2. Tracker no. 400616 Fix for calibration issue on Channel 2. Tracker no. 401312 Fix for ADTS string appearing in application upgrade dialog box. This software is compatible with DK0433 V01.07.00 25 th March 2015 Page 4 of 7 DPI611 SR0112 Software release history @ 01 April 2016
RELEASE 3 Component Versions DPI611 Main Application DK0439 V01.02.00 https://openge.ge.com/svn/dpi611/tags/release_5 All software is programed into the on board NAND flash. DK0433 is a prerequisite of DK0439 and should be installed first (see section 0.) Once a board has been programed with DK0433 it is possible for the board to self-program; this method is used for all upgrades. Fix for Pressure Sensor won t zero bug (tracker no. 394652). This software is compatible with DK0433 V01.07.00 22 nd September 2014 Page 5 of 7 DPI611 SR0112 Software release history @ 01 April 2016
RELEASE 2 Component Versions DPI611 Main Application DK0439 V01.01.00 https://openge.ge.com/svn/dpi611/tags/release_4 All software is programed into the on board NAND flash. DK0433 is a prerequisite of DK0439 and should be installed first (see section 0.) Once a board has been programed with DK0433 it is possible for the board to self-program; this method is used for all upgrades. Installation of DPI611 English language help manual (see Change Note 31800 for details). This software is compatible with DK0433 V01.07 (Build V01.07.00). 29 th August 2014 Page 6 of 7 DPI611 SR0112 Software release history @ 01 April 2016
RELEASE 1 Component Versions Description DK Version Number DPI611 - Combined Binary Release DK0433 V01.07.00 DPI611 EBOOT Loader DK0437 V01.07.00 DPI611 Win CE6 Operating system DK0438 V01.07.00 DPI611 Main Application DK0439 V01.00.02 SVN Tag DK0433, DK0437 and DK0438: https://openge.ge.com/svn/dpi611bsp/tags/release_1_and_beta_6 https://openge.ge.com/svn/dpi611/tags/release_3 All software is programed into the on board NAND flash (U5) this can be done using a chip level programmer or using in circuit programing techniques. The DK0433 binary is used for this purpose. Once a board has been programed it is possible for the board to self-program, this method is used for all upgrades. DK0433 First Issue DK0437 First Issue DK0438 First Issue DK0439 First Issue This issue of firmware to be used in the production version of the following instruments: DPI611 N/A 18 th August 2014 Page 7 of 7 DPI611 SR0112 Software release history @ 01 April 2016