MEEM Memory Ltd. User Guide ios 1. MEEM AT A GLANCE Meem Overview This guide describes the features of MEEM and MEEM App. MEEM automatically backs up your phone onto MEEM itself, every time you charge your phone. your phone power adapter USB port car charger power bank MEEM works exclusively with the free MEEM App available on the App Store. Charging MEEM charges your iphone at the maximum rate. 2. BASICS Avatar Avatar is a graphical representation of the connected iphone or MEEM inside MEEM App. Phone Avatar MEEM Avatar 1 of 7
Memory Meter Phone Avatar Phone MEEM Memory Tube Phone side MEEM side Meem TM Meem is a backup of a phone onto MEEM. Memory Tube & Memory Meter Memory Tube and Memory Meter represent the total memory size of MEEM and its current usage. During Restore / Copy, Memory Tube and Memory Meter represent the total memory size of the connected iphone and its current usage. Superlist Superlist is a list of default backup categories. Mirror Mode Mirror mode is an active backup mode, which creates an exact copy of the phone s data onto MEEM at the time of the backup. Superlist Mirror mode Tap Tap & hold Gestures A few simple gestures are all you need to use MEEM App. Swipe (left/right/up/down) Drag (left/right) Security A compulsory 4 digit PIN of your choice protects MEEM from unauthorized use. The very first time you connect MEEM to a phone you will be asked to set up you PIN. The PIN will be required whenever a new phone is connected to the already setup MEEM. MEEM automatically encrypts your contacts, calendar and messages. 2 of 7
Important: Keep your PIN safe for future reference in case you forget your PIN and / or lose your phone. If the PIN is entered incorrectly more than 10 times, MEEM will be permanently locked. MEEM will still charge the phone, but you will be unable to backup or access the already backed up data. Please contact hello@meemmemory.com for instructions to get the PIN reset. 3. GETTING STARTED Warning: Before using MEEM, please read the IMPORTANT SAFETY INFORMATION on page 6. MEEM Setup Connect MEEM to your iphone and power supply i.e. power adapter, car charger, power bank or USB port of a computer. Important: Make sure the power is switched on in the case of a power adapter; the car is running in the case of a car charger; and the power bank / computer is powered. Once connected, MEEM initiates the setup process: Installing MEEM App Setting a PIN Installing MEEM App Make sure your phone is connected to the internet through Wi-Fi or your carrier s network (LTE, 4G, 3G, E, GPRS) and sign in to App Store. Note: You may also install the MEEM App on your iphone through itunes. Important: Please ensure that your iphone is running ios 7 or above. MEEM App With MEEM When MEEM is connected to iphone for the first time, ios asks your permission for MEEM App to send you notifications and allow access to your contacts, calendar and photos. Select OK for the smooth functioning of MEEM. Important: If the App has not appeared through the steps above, please follow either of the steps below to get the App. Ensure the MEEM cable is connected to the phone. Go to Settings > General > About > MEEM Mirror > Find App for Accessory. Alternatively click on App Store on your phone and search for MEEM Mirror and install it from the App Store. MEEM App Without MEEM MEEM App does not function without MEEM being connected. Avatar Name Tap and hold Avatar to edit the name. Get To Know Me Tap the background to access Get to know me. This helps you get the most out of MEEM. Settings Swipe left on the background to access settings. 4. FEATURES Automatic Backup After the first backup, whenever you connect MEEM to charge your iphone, backup starts automatically after a 21 second countdown. Tap if you want to cancel Automatic Backup. Warning: If some items were deleted on your iphone since the last backup they will also be deleted from MEEM during Automatic Backup. If you do not want these items deleted from the backup, cancel Automatic Backup during the countdown. Restore the items from MEEM to the phone before backing up again. Important: The operation stops if backup exceeds the available capacity on MEEM. 3 of 7
Operation Estimated Time During an operation swipe down to check estimated time. Important: Estimated time may fluctuate depending on the hardware and software parameters of the phone in use. Memory Meter Tap Memory Tube to view Memory Meter. Stop Operation During an operation tap and hold the background to stop the operation. Superlist Tap Avatar or Meem to open / close Superlist: Contacts Calendar Photos Videos Tap a category to disable it for Automatic Backup, and tap again to enable it. Note: Disabling a category does not delete previously backed up data. Manual Phone Backup Drag the phone Avatar onto its Meem for Manual Backup. Note: Disabled categories are not backed up. Important: The operation stops if backup exceeds the available capacity on MEEM. Manual Category Backup Swipe a category from the phone side over to the MEEM side to backup the category. Note: You can backup disabled categories manually. Important: The operation stops if backup exceeds the available capacity on MEEM. Memory Usage Swipe right over a Meem to expand it and view detailed memory usage. Swipe right again on the expanded Meem to close it. Category Size Tap on the expanded Meem to view the backup size of each category. Multiple Phones You can back up two iphones on MEEM. Phone Restore / Copy Drag Meem onto the phone Avatar to restore or copy data from MEEM onto the phone. Note: Disabled categories are restored if there is backup data. Important: The operation stops if restore / copy data exceeds the available capacity on iphone. Category Restore / Copy Swipe a category from the MEEM side over to the phone side to restore / copy the category. Note: You can restore / copy disabled categories manually if there is backup data. Important: The operation stops if restore / copy data exceeds the available capacity on iphone. Sync On the Superlist between the connected phone Avatar and the other phone Meem, tap a category to set up a sync of that category. The selected categories sync during successive Automatic Backups. Important: Make sure you connect both iphones to MEEM one after the other to complete the sync. Since sync is effectively a two way copy, please check available capacity requirements in Category Restore / Copy section above. 4 of 7
Erase Phone Backup Tap and hold Meem to erase it. Erase Category Backup Tap and hold a category size to erase it. Multiple MEEMs You can backup your iphone on multiple MEEMs. Tap the phone Avatar when MEEM is not connected to check the latest backups. 5. SAFETY, HANDLING, & SUPPORT IMPORTANT SAFETY INFORMATION Warning: Please read the safety information below before using MEEM. Handling Handle MEEM with care. MEEM contains sensitive electronic components that can be easily damaged. Do not use a damaged MEEM. Repairing Do not attempt to repair or disassemble MEEM. Please refer to your authorized MEEM retailer and check the MEEM Warranty. Charging Use MEEM with the original power adapter(s) supplied with your phone; and / or certified third party power adapters compatible with USB 2.0 or later; and / or power adapters compliant with applicable country regulations and with one or more of the following standards: EN 301489-34, IEC 62684, YD / T 1591-2009, CNS 15285, ITU L.1000; and / or another applicable mobile phone power adapter interoperability standard. Using a damaged MEEM or power adapter or charging when moisture is present could result in fire, electric shock, injury, or damage to your phone and / or other property. Make sure MEEM is fully plugged into the power adapter, before you plug the power adapter into a power outlet. Prolonged Skin Contact Avoid prolonged skin contact with the connector when MEEM is connected to a power source as this may cause discomfort or injury. Prolonged Heat Exposure MEEM complies with applicable surface temperature standards and limits. However, even within these limits, sustained skin contact with warm surfaces for long periods of time may cause discomfort or injury. Use common sense to avoid situations where your skin is in contact with MEEM for long periods of time when it is operating or is connected to a power source. It is important to use MEEM in a well-ventilated environment. Take special care if you have a physical condition that affects your ability to detect heat against the body. Explosive Atmosphere Do not use MEEM in any area with a potentially explosive atmosphere such as a fueling area, or in a location where the air contains chemicals or particles e.g. grain, dust, or metal powders. Choking Hazard MEEM may present a choking hazard to small children. Keep MEEM out of reach of minors. IMPORTANT HANDLING INFORMATION Cleaning Clean MEEM immediately if it comes into contact with anything that may cause stains e.g. dirt, ink, makeup, lotions etc. To clean: Disconnect MEEM Use a soft, lint-free cloth Do not use cleaning products or compressed air Avoid getting moisture on / in the connectors 5 of 7
Using The Connectors & Cable Never force a connector into a port as this may cause damage that is not covered by the MEEM Warranty. If the connector and port do not join with reasonable ease, it is likely they do not match. Check for obstructions and make sure the connector matches the port and you have positioned the connector correctly in relation to the port. Discoloration of the cable and connectors after regular use is normal; dirt, debris, and exposure to moisture may also cause discoloration. If the cable or connectors become warm during use, or your iphone is not charging and / or backing-up, disconnect it from the power source and clean the connector with a soft, dry, lint-free cloth. Do not use liquids or cleaning products when cleaning the connectors. Certain usage patterns can contribute to the fraying or breaking of the cable. The cable is subject to becoming weak or brittle if repeatedly bent in the same spot. Aim for gentle curves instead of angles in the cable. Regularly inspect the cable and connectors for any kinks, breaks, bends, or other kinds of damage. Should you find any such damages, discontinue the use of MEEM. Operating Temperature MEEM is designed to work in ambient temperatures between 0 C and 35 C / 32 F and 95 F and stored in temperatures between -20 C and 45 C / -4 F and 113 F. MEEM can be damaged if stored or operated outside these temperature ranges. Avoid exposing MEEM to dramatic temperature or humidity changes. It is normal for MEEM to get warm when in use. If the environment exceeds the normal operating temperature range for MEEM (for example, in a hot car or in direct sunlight for an extended period of time), you may experience the following as MEEM attempts to regulate its temperature: Stops charging Stops backup Stops any other operation Important: Move MEEM to a cooler location and wait for a few minutes before trying to use it again. MEEM Support Site Comprehensive support information is available online at www.meemmemory.com/support Get Information About Your MEEM For information about MEEM go to app Settings > MEEM. The items you can view include: Name Capacity Available Model number Firmware Important: Because of the different methods used in calculating memory size and capacity, there is a difference between the stated memory size and capacity. Disk drive manufacturers use the decimal system where 1GB = 1,000,000,000 bytes and flash drives use the binary system where 1GB = 1,073,741,824 bytes. With the addition of disk formatting and system partition overhead, a 32GB memory size is equivalent to 29.1GB capacity. MEEM Firmware uses approximately 800MB capacity therefore the available capacity is 28.3GB. MEEM Firmware Whenever MEEM is connected to the phone, the app will automatically check for available firmware updates. If there is an update available a notification will inform you of this. You should then swipe left on app background to access Settings > Firmware, see the details and install the firmware update. Important: For download of firmware updates, your phone needs to be connected to the Internet through Wi-Fi or your carrier s network (LTE, 4G, 3G, E, GPRS). Reset MEEM Reset erases all contents and settings on MEEM. Go to app Settings > Reset. CE Compliance Statement MEEM complies with the essential requirements and other relevant provisions of EC Directive 2004 / 108 / EC - Electromagnetic Compatibility (EMC). Important: Unauthorized changes or modification to MEEM could void the electromagnetic compatibility (EMC) and negate your authority to operate MEEM. WEEE Compliance Statement MEEM complies with EU Directive 2012 / 19 / EU on the restriction of the use of waste electrical and electronic equipment. 6 of 7
RoHS Compliance Statement MEEM complies with EU Directive 2011 / 65 / EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment and its amendments. FCC Compliance Statement MEEM complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. Important: Unauthorized changes or modification to MEEM could void the electromagnetic compatibility (EMC) and negate your authority to operate MEEM. MEEM Warranty Please refer to the MEEM One (1) Year Limited Warranty document or visit www.meemmemory.com/warranty. Disposal And Recycling Information Please visit www.meemmemory.com/recycle for free and environmentally friendly disposal of your MEEM. MEEM Memory Ltd. 2016 MEEM Memory Ltd. All rights reserved. MEEM and MEEM logo are trademarks of MEEM Memory Ltd registered in EU, US and other countries. Other company and product names mentioned herein may be trademarks of their respective companies. Mention of thirdparty products is for informational purposes only and constitutes neither an endorsement nor a recommendation. MEEM assumes no responsibility with regard to the performance or use of these products. All understandings, agreements, or warranties, if any, take place directly between the vendors and the prospective users. Every effort has been made to ensure that the information in this manual is accurate. MEEM is not responsible for printing or clerical errors. 7 of 7