ASD slim shoe box lights use up to 8% less energy than metal halide or high pressure sodium lights and put out a much nicer light. Lights up instantly, no warm-up period needed, type III distribution, wider and broader lighting coverage, efficient brightness for large industry outdoor applications. These lights are perfect for retrofit or new construction applications in industrial, warehouse, manufacturing, commercial, office, residential, and hospitality facilities. Pre-installed shorting circuit cap allows installing photocell if needed (photocell not included). Slip fitter mounting design for more flexible lighting direction, can be readjust according to different needs and installation location requirements. Mounting accessories and instruction manual included in package. FEATURES AND BENEFITS: Easy to install, wire and mount Lightweight die-cast aluminum housing Instant start with no noise or flickering Build-in receptacle for easy twist-lock photocell installation Beam angle: Type III Operating temperature of -22 to 122 Wet location IP65 L-7 Life > 25, hrs culus certified DesignLights Consortium (DLC) listed (Classification: Premium) 5 Year warranty 12 HIGH LUMINOUS EFFICIENCY ORDERING MATRIX: Family Modification Photocell Watts Dimmable CCT Series ASD-LSB 1 P (Photocell Receptacle) XX X 5 PRM LED Shoe Box light 1 = 1 W D = Dimmable 5, K Premium 15 = 15 W LED SHOE BOX LIGHT: 2 = 2 W Model Watts Dimming Compatible CCT Lumens Dimensions (LxWxH) ASD-LSB1P-1D5PRM 1 Yes 5, K 13,44 lm 19 3/16" x 12 5/8" x 3 1/2" ASD-LSB1P-15D5PRM 15 Yes 5, K 18,498 lm 19 3/16" x 12 5/8" x 3 1/2" ASD-LSB1P-2D5PRM 2 Yes 5, K 24,268 lm 19 3/16" x 12 5/8" x 3 1/2"
PRODUCT SPECIFICATIONS: Construction & Materials Lens PC Reflector Aluminum Housing Aluminum Finish Bronze Weight ASD-LSB1P-1D5PRM ASD-LSB1P-15D5PRM ASD-LSB1P-2D5PRM 12. lbs (5.47 kg) 12.1 lbs (5.5 kg) 13.2 lbs (6 kg) Environmental System Work Environment Suitable for Wet Locations, IP65 Operating Temperature -22 to 122 (-3 to 5 ) L-7 Life > 25, hrs Optical System Luminous Flux ASD-LSB1P-1D5PRM ASD-LSB1P-15D5PRM ASD-LSB1P-2D5PRM 13,44 lm 18,498 lm 24,268 lm Color Temperature 5, K CRI >8 Electrical System Input Voltage 1~277V AC 5/6 Hz Max input current ASD-LSB1P-1D5PRM ASD-LSB1P-15D5PRM ASD-LSB1P-2D5PRM 1.32 A 1.87 A 3.1 A Inrush current ASD-LSB1P-1D5PRM ASD-LSB1P-15D5PRM ASD-LSB1P-2D5PRM 1.65 A 1.98 A 3.75 A Action time (Inrush current) ASD-LSB1P-1D5PRM ASD-LSB1P-15D5PRM ASD-LSB1P-2D5PRM 76 μs 712 μs 1.26 ms AC input range min 9 V max 35 V Off State Power W Power Consumption ASD-LSB1P-1D5PRM ASD-LSB1P-15D5PRM ASD-LSB1P-2D5PRM 1 W 15 W 2 W Power Factor.99 Output voltage ASD-LSB1P-1D5PRM ASD-LSB1P-15D5PRM ASD-LSB1P-2D5PRM 24~69 V 22~61 V 18~54 V Max output current ASD-LSB1P-1D5PRM ASD-LSB1P-15D5PRM ASD-LSB1P-2D5PRM 2,1 ma 3,15 ma 6,7 ma LED Driver Class Class I Warranty & Certifications 5-year limited warranty DesignLights Consortium (DLC) listed culus certified E47384 The LED Shoe Box light is designed to install as a surface mounted luminaire.
Shoe Box Light with Slip fitter Mounting Bracket Shoe Box Light with Mounting arm for square pole(not included) 12 5/8 (321 mm) 3 1/2 (89.6 mm) 12 5/8 (321 mm) 4 1/8 (14 mm) 19 3/16 (487 mm) 16 3/4 (426 mm) 1 W LUMINOUS INTENSITY DISTRIBUTION DIAGRAM C PLANE ISOLUX DIAGRAM (UNIT:lx) MH(m) 3-15 -/+18 15 4 5-12 12 6 7-9 9 8 9 18-6 27 6 36 UNIT:cd -3 45 3 C/18,156.2 C3/21,139.2 C6/24,96.5 C9/27,84.9 AVERAGE BEAM ANGLE(5%):119.2 DEG 9 1 11. 4.5 9. 46 38 31 23 15 77. 61. 38. 31. 23. S(m) 15 W 2 W LUMINOUS INTENSITY DISTRIBUTION DIAGRAM C PLANE ISOLUX DIAGRAM (UNIT:lx) MH(m) LUMINOUS INTENSITY DISTRIBUTION DIAGRAM C PLANE ISOLUX DIAGRAM (UNIT:lx) MH(m) 3 3-15 -/+18 15 4 5-15 -/+18 15 4 5-12 12 6-12 12 6 7 7-9 9 8-9 9 8 13 9 16 9 26-6 39 6 52 UNIT:cd -3 65 3 C/18,155.1 C3/21,141.6 C6/24,98. C9/27,84.5 AVERAGE BEAM ANGLE(5%):119.8 DEG 1 11. 4.5 9. 65 54 44 33 22 11 87. 54. 44. 33. S(m) 32-6 48 6 64-3 8 3 UNIT:cd C/18,155.1 C3/21,14.1 C6/24,96.6 C9/27,84.1 AVERAGE BEAM ANGLE(5%):119. DEG 1 11. 4.5 9. 86 72 58 43 29 14 12 72. 58. 43. S(m)
PACKAGE CONTENTS: Description Q-ty LED Shoe Box Light Fixture 1 Slip fitter (A) 1 Screws for Slip fitter (B) 4 Short circuit cap (C) 1 Box 1 Installation Instructions 1 A B C ELECTRICAL SCHEMATIC DIAGRAM Power connector 12~277V 5/6 Hz L N G L (live/hot) connect black N (neutral) connect white Ground connect green L N G DRIVER Dim + (Violet) Dim - (Gray) Vaux (Black) FIXTURE WARNING RISK OF PERSONAL INJURY READ and follow all WARNINGS and installation instructions. Keep or give to the owner for future reference. Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from carton, handling, installing, and maintaining this product. Risk of electric shock: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Risk of Fire: Minimum 9 С supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. ASD assumes no responsibility for claims arising out of improper or careless Installation or handling of this product.
INSTALLATION GUIDE IMPORTANT SAFETY INFORMATION: Please read all the instructions below before installation. Make sure that the supply voltage corresponds to the rated product voltage. The product must be installed by a qualified electrician in accordance with the National Electrical Code and corresponding local codes. If the product is damaged, do not use it. INSTALLATION STEPS SHORTING CAP / PHOTOCELL INSTALATION To install shorting cap (included) or photocell JL-25C (sold separately), firmly place it onto the receptacle base located on the top of the luminaire unit and twist it clockwise until it locks into place. Photocell (not included) Cap Install Remove Install Remove
LED Shoe Box light SLIP FITTER BRACKET INSTALLATION: 1. 3. 2. 4. 1. Loosen the 2pcs screws on the round plate and loosen big screw inner the box. 2. Pass the AC wire through the SF base and tight the 4pcs screws on the light body. 3. Pass AC wire through the other part of SF bracket and tight the big screw back inner the box. 4. Fix the box by 2 smaller screws and finish the installation. 1. Unit: mm 1 32 SLIP FITTER MOUNTING INSTALLATION: 1. Connect the wire in same color (correspond to wire N, L and G) together with nut wire connectors. fix the light mounted on the pole, tighten the screws on the lamp arm. Ø 6 2. 2. Screw the nuts with a Slotted screwdriver. Loosen the screw securing with an allen wrench, adjust the light to according beam angle. adjusting nut 3. Tighten the screw securing. Install the adjust nuts. 3. 1 screw securing E-mail: orders@asd-lighting.com WebSite: www.asd-lighting.com Phone: 781-739-3977 Fax: 339-52-897 2
MOUNTING ARM FOR SQUARE POLE ASD-LSB1-PDB (SOLD SEPARATELY) INSTALLATION: 1. Drill holes on the square pole corresponding to the holes on the arm. 2. Install mounting arm: pass the AC wire through the base and tight the 4pcs screws on the light body. 3. Loosen the screw on the lamp arm and remove the terminal box cover. 4. Use the bolt and nut plate to fix the fixture on pole tightly. 5. Connect the wire in same color (correspond to wire N, L and G). 6. Tighten the water-proof gasket and cover plate on the arm by screws. 1. Unit: mm 4. 1 nut plate 32 19 Ø16 Ø8.5 2. 5. 7 3. 6.
ORDERING INFORMATION LED SHOE BOX LIGHT ORDERING INFORMATION: Model Watts CCT UPC Product Code Pcs in one Size Weight ASD-LSB1P-1D5PRM 1 5, K 8192121253 27.2 1 23.2" x 15.7" x 6.3" 14.5 lbs ASD-LSB1P-15D5PRM 15 5, K 819212126 27.21 1 23.2" x 15.7" x 6.3" 14.5 lbs ASD-LSB1P-2D5PRM 2 5, K 8192121277 27.23 1 23.2" x 15.7" x 6.3" 15.6 lbs MOUNTING ARM FOR SQUARE POLE ORDERING INFORMATION: ASD-LSB1-PDB Model Materials Weight Dimensions Die-casting Aluminum Pcs in one Size Weight 1.8 lb (.81 kg) 5 3/4" x 4 3/4" x 2 5/16" 1 13.8" x 15.7" x 6.3" 2.5 lbs Model UPC GTIN 14 Product Code ASD-LSB1-PDB 8192121284 18192121281 27.25 PHOTOCELL TWIST-LOCK 11-277V ORDERING INFORMATION: Model Weight Dimensions Pcs in one Size Weight JL-25C.4 lb (.2 kg) 3 5/16" x 2 5/8" 48 13.8" x 15.7" x 6.3" 23.8 lbs Model UPC GTIN 14 Product Code JL-25C 8192121291 18192121298 27.27