WiFi 80. b/g/n Module with IC Antenna OSX XP Vista 7 8 Revised 3/DEC/06 0 Also available with IPEX Receptical (LM8) Features WiFi 80. b/g/n FCC, CE/ R&TTE and SRRC certified solution Operates in.4 GHz Frequency bands RoHS, REACH and WEEE compliant Onboard Chip Antenna Plug and Play (Linux, MAC OSX and Windows XP 0 compatible) Optional Features Up to 50Mbps Data Transfer Rate DC power input 3.3V or 5V 80.e-compatible bursting and I standards WPS or PDN control function on half-hole pin 6 BPSK, QPSK, 6 QAM and 64 QAM modulation schemes Support LED function when choose WPS option WEP, TKIP, and AES, WPA and WPA encryption schemes Fully-featured software utility for easy configuration and management Overview The WiFi USB module fully supports the IEEE 80. b, g and n standards. It supports up to 50Mbps high-speed wireless network connections and is designed to provide excellent performance with low power consumption. It is designed to be a highly cost-effective module that offers superior performance, better power management applications above its nearest competitors. Antenna Option - IPEX This module is also offered with an IPEX receptical for increased range and for placing the module in a different location to the selected antenna. Please speak with our team for guidance when looking at this option. Page of 9
WiFi 80. b/g/n Module with IC Antenna General Specification Wireless Wireless Standard 80. b/g/n, 80.3, and 80.3u Module Type Host Controller Interface (HCI) OS Compatibility Linux, MAC OSX and Windows XP 0 Security WEP, TKIP, AES, WPA and WPA Network Architecture Ad hoc mode (Peer-to-Peer) and Infrastructure mode Hardware Chipset Realtek Antenna Onboard Chip Antenna Interfaces USB.0 (Full Speed) RF Characteristics Tx Output Power (+/- dbm): 3dBm@n, 7dBm@b, 5dBm@g Rx Sensitivity Mbps -80dBm@8%,54Mbps -70dBm@0%,30Mbps -64dBm@0% Range (in open space) Up to 80m Current Consumption (DC 5V Module) Transmit: 5 ma (Maximum) Receive: max 05 ma DC (Maximum) Current Consumption (DC 3V3 Module) Transmit: max. 7 ma (Maximum) Receive: max 39 ma (Maximum) Data Transfer Rate,,5.5,6,,,8,,4,30,36,48,54,60,90,0 Mbps to a maximum of 50Mbps Frequency.4GHz ISM Band Modulation Scheme BPSK/ QPSK/ 6-QAM/ 64-QAM Spread Spectrum IEEE 80.b: DSSS (Direct Sequence Spread Spectrum) IEEE 80.g/n: OFDM (Orthogonal Frequency Division Multiplexing) Physical Characteristics Operating Temperature 0 C to +50 C ambient temperature Storage Temperature -0 C to +70 C ambient temperature Humidity 5% to 90% maximum (non-condensing) Dimensions (L x W x H) 5mm x mm x mm Weight 3 g Certifications FCC, CE/ R&TTE and SRRC Compliance RoHS, REACH and WEEE Page of 9
WiFi 80. b/g/n Module with IC Antenna Pin Outs DC Power Input 9 - GND 6 - WPS or PDN 8 - RF 5 - VCC 7 - GND 4 - USB D- Module Min Typical Max Unit DC 5V 4.75 5 5.5 V DC 3.3V 3.35 3.3 3.465 V 3 - USB D+ - GND - LED out Pin Assignments Pin Pin Name Type Description LED out Output LED output GND Ground Common Ground 3 USB D+ I/O USB D+ 4 USB D- I/O USB D- 5 VCC Power DC Power Supply (Refer to DC Power Input table) 6 WPS or PDN I/O WiFi Protected Setup switch or Power Down switch (factory option) 7 GND Ground Common Ground 8 RF - Do not connect 9 GND Ground Common Ground Page 3 of 9
WiFi 80. b/g/n Module with IC Antenna PCB Footprint mm mm mm mm mm.4mm mm.5mm mm mm.5mm 0.9mm 6.5mm mm mm No Grounding 0.9mm mm mm 7.4mm 5mm 3.3V LED The external circuit for WiFi activity LED (factory option) 560 ohms LED out 3.3V The function of pin 6 is optional to WPS (GPIO) or WPS Switch 0K ohms power-down (GPIO), a factory option. WPS (GPIO) The external circuit for WPS function input nf (factory option), uses a tact switch. Power down switch The external circuit power-down function input (factory option) uses a push or toggle switch. Page 4 of 9 PDN (GPIO) R 00 ohms
WiFi 80. b/g/n Module with IC Antenna Soldering Reflow Chart 30 300 80 60 40 Temperature C 00 80 60 40 0 00 80 60 40 0 0 0 0 40 60 80 00 0 40 60 80 00 0 40 60 # Time (s) 80 300 30 340 360 # #3 #4 Zone 8 0.0 0.0 Zone 9 35.0 35.0 Zone 0 50.0 50.0 380 #5 Speed (cm/min): 70.0 Name Max Min Length Zone 58.0 58.0 Probe Zone 60.0 60.0 Liquidus Line Rising 0.00-90.00 # # #3 #4 #5 Page 5 of 9.00 3.00.50.00.50 Zone 3 70.0 70.0 Zone 4 70.0 70.0 Zone 5 80.0 80.0 Zone 6 80.0 80.0 Zone 7 90.0 90.0 Maximum / Minimum Above 30.0 50.50 4.50 50 47.00 5.50 Max 43.00 44.0 44.0 4.60 43.50 Min 4.30 4.0 4.00 5.00 5.00 Slope Positive Negative.9..7.87.37 -.97-3.08 -.69 -.3 -.95
WiFi 80. b/g/n Module with IC Antenna Tape and Reel Packaging.50mm 4.0mm 40mm 5.6mm 6mm 44mm.0mm 0.mm.75mm Tape Dimensions 0.3mm.60mm.4mm Reel Dimensions 330mm Notes Carton Dimensions (L x W x H): 395mm x 360mm x 305mm Quantities 500 modules per Tape 5 Boxes per Carton 7500 modules per carton 49.4mm 00mm Page 6 of 9
WiFi 80. b/g/n Module with IC Antenna Tray Packaging Tray Dimensions 0mm / LM8 X 0 3mm mm 75mm 30mm Notes Quantities Anti-Static PS Tray, Black. 0 modules per Tray Material Thickness: mm 0 Boxes per Carton Height of Tray: 0mm 400 modules per Carton Carton Dimensions (L x W x H): 340mm x 90mm x 385mmm Page 7 of 9
WiFi 80. b/g/n Module with IC Antenna Packaging for Tape & Reel / Tray The trays/reels are stacked and inserted into an anti-static vacuum bag and the Anti-Static Label, Model Name Label and Moisture Sensitive Labels stuck on. drying agent Humidity Indicator Card Reels are place within a vacuum bag. Anti-static aluminium vacuum bag. Trays are stacked up with an empty tray on the top. The vacuum bag is placed inside the box and a Model Name Label stuck on the front-side of each box. Model name label Anti-static aluminium vacuum bag. box ) b ox carton carton label Each carton contains 4 boxes. Page 8 of 9
WiFi 80. b/g/n Module with IC Antenna See Below Packaging Options 80-046 5V Module x SMT HCI 80.n 50Mbps USB IC Antenna Module Tray 80-0466 5V Module x SMT HCI 80.n 50Mbps USB IC Antenna Module Tape & Reel 80-0469 3.3V Module x SMT HCI 80.n 50Mbps USB IC Antenna Module Tray See our website to download any applicable Software, Manuals and Notes - http://www.lm-technologies.com/downloads Page 9 of 9