Overview 1. 42u rack - BW904A Shock Intelligent Rack (1) 2. Network switches - HP 5900AF-48XGT (2) 3. Management nodes - HP ProLiant DL360p Gen8 servers(2) 4. Vertica Server nodes - HP ProLiant DL380p Gen8 servers (4, 8, 12 or 16) At A Glance is a pre-integrated, optimized solution, developed on HP Converged Infrastructure and the HP Vertica Analytics Platform, enabling big data scale analytics at high speed and low cost, with rapid deployment and easier maintenance. This solution is purpose built for the demands of big data workloads i.e. extremely low latency query performance, support for statistical modeling and data analytics, along with the ability to process large volumes of data - including structured, semi-structured, and unstructured data - at scale. It consists of a massively parallel database and an extensible analytics framework optimized for real time analysis of data scaling from gigabytes to petabytes. The following components are included in the HP AppSystem for Apache Hadoop: Configurations The following components are included in the : Hardware 42U Intelligent Series Rack with modular 3PH or 1Ph PDUs c04203034 DA 14872 Worldwide Version 2 June 10, 2014 Page 1
Overview Management Nodes (PN# H6X78A) - Two DL360p servers are configured as management nodes. They provide the primary interface and integration point to the ConvergedSystem, while performing management and monitoring functions. The node with Red Hat Enterprise Linux runs the HP Cluster Management Utility software and Converged Systems tools for provisioning, monitoring, and management of the appliance. The node with Windows Server 2012 runs HP Insight Control and Insight Remote Support for system management, monitoring, and proactive support. Vertica Server Nodes (PN# H6X75A) - 4, 8, 12 or 16 DL380p servers (with 600GB disk drives & 128GB memory) loaded with Vertica Enterprise Edition v7 are configured as server nodes. Network Switches - Two HP A5900AF-48XGT switches (PN# H6X79A) provide redundant networking with every node connected to both switches. Software HP Insight Cluster Management Utility (CMU) - Insight CMU v7.1 provides is used for provisioning of the systems in the Vertica cluster. The CMU server runs on the management node. CMU is the primary management and monitoring interface for the Vertica cluster. HP Insight Control (IC) - Essential server and firmware management, and updates. Operating System - All Vertica server nodes, and one of the management nodes run Red Hat Enterprise Linux 6.4 64-bit. The second management node runs Windows Server 2012. HP Vertica Enterprise Edition - The DL380p nodes are pre-installed with HP Vertica Enterprise Edition v7 as a single cluster with the amount of Vertica licenses required by the customer. Services HP Deployment Services are included as part of the ConvergedSystem 300 for Vertica providing factory integration and onsite deployment services. The majority of the configuration is performed in the HP factory to allow for a quicker deployment by delivering a ready-to-deploy solution that is preconfigured and tested. Factory integration includes custom racking, point-to-point cabling, labeling per HP's guideline, OS and application software load and configuration, configuration of IPs/credentials, installation and instantiation of Vertica cluster. Additional features include: Project Management services to oversee factory and customer site-installation activities, including capturing customer specific parameters, proactive communication, planning and scheduling for a coordinated installation at the customer site Installation and start up services Documentation package that details the configuration and settings of the delivered solution, including diagrams of the hardware layout and point-to-point cabling Documentation package that details the configuration and settings of the delivered solution, including diagrams of the hardware layout and point-to-point cabling NOTE: The factory integration services included in this solution require a Customer Intent Document (CID) to assist with the configuration and successful installation and implementation of the solution. The CID Reference ID# is required to be in place prior to sale. Before issuing a purchase order against this solution, please contact your HP sales representative to engage an HP Factory Express Engagement Project Manager (EPM) who will manage the CID process. NOTE: does not include advanced data center Network Integration Services. Some customers that do not have networking expertise internally may require Network Integration Services. For these customers, it is highly recommended that a custom network integration service be arranged with HP TS Consulting. For more information, please contact your TS sales representative. Other options include Big Data Infrastructure Consulting Services for Big Data infrastructure strategy, planning and implementation, which pulls together all infrastructure components. Consultants can help prepare the client's infrastructure to support Vertica and Autonomy solutions, as well as help implement HP ConvergedSystems with existing architectures. Strategic Services include Enterprise Planning for HAVEn c04203034 DA 14872 Worldwide Version 2 June 10, 2014 Page 2
Overview Big Data Infrastructure Transformation Workshop HP Big Data Protection & Compliance Analysis Service For more information about the HP ConvergedSystems see: http://www.hp.com/go/convergedsystems For more information about HP ProLiant servers see: http://h18004.www1.hp.com/products/servers/platforms For more information about HP Insight CMU, see: http://www.hp.com/go/cmu For more information about HP Racks see: http://h18004.www1.hp.com/products/servers/proliantstorage/racks/index.html For more information on HP Vertica Enterprise Edition, see: http://vertica.com/crane For more information on HP Services, see: hp.com/us/go/ciservices c04203034 DA 14872 Worldwide Version 2 June 10, 2014 Page 3
How to Order How to order HP The method for purchasing the is simple. It is a solution bundle ConvergedSystem 300 for with all Hardware, Software, and Support components predetermined. Vertica Start by estimating how much raw, uncompressed data needs to be loaded into the Vertica 7 database. From this you can approximate how many nodes you might need for an initial order. The available configurations are in increments of 4 nodes, up to a full rack of 16 nodes. A simple rule of thumb is to allocate about 10TB to a single server node. NOTE: It is recommended that you work with a sizing expert from HP or an HP-authorized partner, in order to determine the number of nodes that will best address your analytics needs for today and allow for future data growth. 2. Deployment services and single point of support for software and hardware components are included. 3. Determine what support level choice and options meet your needs. Please see Services section below, or visit: hp.com\services\proactivecare and hp.com\services\proactiveselect for more detail. c04203034 DA 14872 Worldwide Version 2 June 10, 2014 Page 4
HP Services & Support Options HP Care Packs and Additional services The recommended HP support is HP Proactive Care plus the HP Personalized Support Option. HP Proactive Care - 3yr or 5yr HP Proactive Care - HP Proactive Care begins with providing all of the benefits of proactive monitoring and reporting along with rapid reactive care. You also receive enhanced reactive support, through access to HP's expert reactive support specialists. You can customize your reactive support level by selecting either 6 hour call-to-repair or 24x7 with 4 hour onsite response. You may also choose DMR (Defective Media Retention) option. HP Proactive Care with the HP Personalized Support Option - Adding the Personalized Support Option for HP Proactive Care is highly recommended. The Personalized Support option builds on the benefits of HP Proactive Care Service, providing you an assigned Account Support Manager who knows your environment and delivers support planning, regular reviews, and technical and operational advice specific to your environment. These proactive services will be coordinated with Microsoft's proactive services that come with Microsoft Premier Mission Critical, if applicable. HP Proactive Select - 3yr or 5yr And to address your ongoing/changing needs, HP recommends adding Proactive Select credits to provide tailored support options from a wide menu of services, designed to help you optimize capacity, performance, and management of your environment. These credits may also be used for assistance in implementing updates for the solution. As your needs change over time you flexibly choose the specific services best suited to address your current IT challenges. In addition, HP highly recommends HP Education Services (for customer training and education) and additional Technical Services, as well as in-depth installation or implementation services as may be needed. For additional information, please visit: HP Education Services: http://h10076.www1.hp.com/education/bigdata.htm HP Technology Consulting Services: http://www.hp.com/services/bigdata Deployment Services: www.hp.com/services/deployment Warranty Services The is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. As the HP ConvergedSystem 300 for Vertica is a solution made up of many components, the warranty across the different components will vary. The requires customers purchase a minimum of 3 year Proactive Care support bringing the support service level of all components to a consistent level of 4 hour response, 24x7. HP Financial Services To support customers' transition, HP Financial Services (HPFS) can help in a way that you may not have considered. HPFS can help you invest in your business while preserving precious capital. For more information, contact your local HP Financial Services Representative. In the United States, call 1-888-277-5942. In Canada, dial 1-800-HP-LEASE. For more information please visit: www.hp.com/hpfinancialservices for links to HP Financial Services around the world. Rack Airflow Requirements HP 642 1075mm Shock Intelligent Series Rack The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The HP 642 1075mm Shock Intelligent Series Rack s provide c04203034 DA 14872 Worldwide Version 2 June 10, 2014 Page 5
HP Services & Support Options enhanced airflow for maximum cooling (81% total open area on HP rack front doors), allowing these racks to be fully loaded with servers using the latest processors. Front and rear doors: You must allow 830 square inches (5,350 sq cm) of holes evenly distributed from top to bottom to permit adequate airflow (equivalent to a required 64 percent open area for ventilation). The clearance from face of rack to inside of the front door needs to be a minimum of 1.75". Side: The clearance between the installed rack component and the side panels of the rack needs to be a minimum of 2.75 inches (7 cm). c04203034 DA 14872 Worldwide Version 2 June 10, 2014 Page 6
Technical Specifications HP ConvergedSystem 300 for Vertica ¼ rack (4-node) cluster A ¼ rack cluster of includes the following: One (1) HP 642 1075mm Shock Intelligent Series Rack includes: Two (2) Management nodes include: o 1x 654081-B21 HP DL360p Gen8 8-SFF CTO Server o 1x 712724-L21 HP DL360p Gen8 E5-2660v2SDHS FIO Kit o 4x 708641-B21 HP 16GB 2Rx4 PC3-14900R-13 Kit o 4x 652583-B21 HP 600GB 6G SAS 10K 2.5in SC ENT HDD o 1x 700700-B21 HP Ethernet 10Gb 2P 561FLR-T FIO Adptr o 1x 631681-B21 HP 2GB FBWC for P-Series Smart Array o 1x 734807-B21 HP 1U SFF Easy Install Rail Kit o 2x 656362-B21 HP 460W CS Plat PL Ht Plg Pwr Supply Kit o 3x AF594A HP 0.9M,Blue,CAT6 STP, Cable Data o 2x SG506A HP C13-C14 2.5ft Sgl Data Special o 1x EM449AA Belkin USB To Serial Adapter Four (4) Vertica Server nodes each includes: o 1x 665554-B21 HP DL380p Gen8 25-SFF CTO Server o 1x 715214-L21 HP DL380p Gen8 E5-2690v2 FIO Kit o 1x 715214-B21 HP DL380p Gen8 E5-2690v2 Kit o 8x 708641-B21 HP 16GB 2Rx4 PC3-14900R-13 Kit o 2x 652564-B21 HP 300GB 6G SAS 10K 2.5in SC ENT HDD o 23x 652583-B21 HP 600GB 6G SAS 10K 2.5in SC ENT HDD o 1x 700700-B21 HP Ethernet 10Gb 2P 561FLR-T FIO Adptr o 1x 631681-B21 HP 2GB FBWC for P-Series Smart Array o 1x 663478-B21 HP 2U SFF BB Gen8 Rail Kit with CMA o 2x 656363-B21 HP 750W CS Plat PL Ht Plg Pwr Supply Kit o 2x AF595A HP 3.0M,Blue,CAT6 STP,Cable Data o 2x SG506A HP C13-C14 2.5ft Sgl Data Special (2) HP 5900AF-48XGT Switches Three phase Modular Power Distribution Unit (PDU) o Three-phase (2/4 PDU per rack): o HP Intelligent Mod PDU 24A Na/Jpn Modular Power Distribution Unit o HP Intelligent Mod PDU 40A Na/Jpn Modular Power Distribution Unit o HP Intelligent Mod PDU 3ph 24A Na/Jpn Modular Power Distribution Unit o HP Intelligent Mod PDU 3ph 40A Na/Jpn Modular Power Distribution Unit o HP Intelligent Mod PDU 32A Intl Modular Power Distribution Unit o HP Intelligent Mod PDU 3ph 32A Intl Modular Power Distribution Unit Red Hat Enterprise Linux (RHEL) 6.4 on each server node, and one management node Microsoft Windows Server Edition 2012 on one management node HP Insight CMU v7.1 HP Insight Control HP Vertica Enterprise Edition v7 Factory services to default configure, rack, and cable the infrastructure in a rack Site assessment Installation and start up This 4-node cluster can be seamlessly scaled to handle larger data sizes by simply adding additional Vertica server nodes in increments of 4 nodes. A single rack can accommodate up to 16 Vertica server nodes, or approximately 160TB of uncompressed data with some allowance for data growth in the future. c04203034 DA 14872 Worldwide Version 2 June 10, 2014 Page 7
Technical Specifications Technical Specifications Dimensions (per rack) Shipping Dimensions (per rack, with packaging materials) Height Width Depth Height Width Depth 42U, 78.816 in (200.19cm) 23.535 in (59.78 cm) 42.741in (108.56 cm) 85.35 in (216.80 cm) 35.43 in (90cm) 50.87 in (129.20 cm) Maximum load Full Rack 1600 lb (726kg) Half Rack 900 lb (408kg) Color Doors Black with Silver extrusion Frame Black Clearance (for air flow Front 48 in (121.9 cm) and access) Rear 30 in (76.2 cm) Temperature range Operating 50 to 90 F (10 to 35 C) Non-Operating -22 to 140 F (-30 to 60 C) Relative humidity Operating 10 to 90% relative humidity (Rh) Altitude Operating 3000 meters maximum. Power Usage -Operating Full Rack 10.5kW (48.4A at 208V) BTU rating, maximum Full Rack 34300 BTU/hr Power Connections Three-Phase Power NA/Japan or International Option External Network Connections Full Rack Single-Phase Power Full Rack Location ilo Management Node1 ToR Switch ToR Switch (2) CS8365C or (2) IEC60309 4 pole, 5wire NA/Japan or International Option (2) NEMA L6-30p or (2) IEC60309-32A Connection Speed/Connection Type 1 GbE / RJ45 10 GbE / RJ45 40 GbE / QSFP+ ToR Switch 10 GbE / SFP+ NOTE: No direct sustained sunlight. NOTE: The maximum load for the HP Intelligent Series Rack is 3000 lb (907.18kg). Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment. c04203034 DA 14872 Worldwide Version 2 June 10, 2014 Page 8
Summary of Changes Date Version History Action Description of Change: 21-May-2014 From version 1 to 2 Addition Text added to reflect 5 years in HP Care Packs and Additional services section. Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Cloudera trademark statement Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. c04203034 DA 14872 Worldwide Version 2 June 10, 2014 Page 9