IP4284CZ10-TB; IP4284CZ10-TT

Similar documents
IP4285CZ9-TBB. ESD protection for high-speed interfaces

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

ESD protection for ultra high-speed interfaces

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Bidirectional ESD protection diode

PUSB3AB4. 1. Product profile. ESD protection for ultra high-speed interfaces. 1.1 General description. 1.2 Features and benefits. 1.

PESD18VV1BBSF. Very symmetrical bidirectional ESD protection diode

74ABT General description. 2. Features and benefits. 3. Ordering information. Quad 2-input AND gate

PESD18VF1BL. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data. 5. Pinning information

PESD24VF1BSF. Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit C d diode capacitance f = 1 MHz; V R = 0 V

PESD5V0C1USF. in portable electronics, communication, consumer and computing devices.

PESD5V0X2UM. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

PESD3V6Z1BCSF. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

MMBZ16VAL. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

SiGe:C Low Noise High Linearity Amplifier

Broadband system applications i.e. WCDMA, CATV, etc. General purpose Voltage Controlled Attenuators for high linearity applications

CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling.

PNP 500 ma, 50 V resistor-equipped transistor; R1 = 2.2 kω, R2 = open

PESD12VV1BL. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

Unidirectional ESD protection diode

NCR402T. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

NWP2081T. 1. General description. 2. Features and benefits. 3. Applications. 4. Ordering information. Half-bridge driver IC

General-purpose Zener diodes in a SOD323F (SC-90) very small and flat lead Surface-Mounted Device (SMD) plastic package.

PESD5V0L1BSF. Ultra low profile bidirectional low capacitance ESD protection diode

Ultra low capacitance ESD protection for Ethernet ports. ESD protection high-frequency AC-coupled Ethernet ports

PESDxUSB3S series. ESD protection for differential data lines

PESD4V0Z1BSF. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

PESD1IVN-U. 1. General description. 2. Features and benefits. 3. Applications. Quick reference data

PTVSxS1UR series. 1. Product profile. 400 W Transient Voltage Suppressor. 1.1 General description. 1.2 Features and benefits. 1.

Ultra low capacitance bidirectional ESD protection diode

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Femtofarad bidirectional ESD protection diode

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESD3V3L1UA; PESD3V3L1UB; PESD3V3L1UL

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

300 V, 100 ma PNP high-voltage transistor

PESD5V0U2BT. 1. Product profile. Ultra low capacitance bidirectional double ESD protection diode. 1.1 General description. 1.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

IP4234CZ6. 1 Product profile. Single USB 2.0 ESD protection to IEC level General description. 1.2 Features. 1.

PESD5V0U1BA; PESD5V0U1BB; PESD5V0U1BL

PTVSxP1UP series. 600 W Transient Voltage Suppressor

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESD5V0V1BA; PESD5V0V1BB; PESD5V0V1BL

PUSB3FA0. 1 Product profile. ESD protection for ultra high-speed interfaces. 1.1 General description. 1.2 Features and benefits. 1.

PRTR5V0U2X Ultra low capacitance double rail-to-rail ESD protection diode Rev January 2008 Product data sheet

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

The IP4790CZ38 can be used with a range of DisplayPort devices including: Personal computer PC monitor Notebook

PESD3V3Y1BSF. Extremely low capacitance bidirectional ESD protection diode

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PCMFxUSB3S series. Common-mode EMI filter for differential channels with integrated ESD protection

PESD2V0Y1BSF. Extremely low capacitance bidirectional ESD protection diode

DATA SHEET. BGA2031/1 MMIC variable gain amplifier DISCRETE SEMICONDUCTORS. Product specification Supersedes data of 2000 Mar 02.

General-purpose Zener diodes in an SOD523 (SC-79) ultra small and flat lead Surface-Mounted Device (SMD) plastic package.

1 GHz wideband low-noise amplifier with bypass. The LNA is housed in a 6-pin SOT363 plastic SMD package.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

45 V, 100 ma NPN general-purpose transistors

Total power dissipation: 500 mw Small plastic package suitable for surface-mounted design Wide working voltage range Low differential resistance

GreenChip synchronous rectifier controller. The TEA1792TS is fabricated in a Silicon-On-Insulator (SOI) process.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

MF1 MOA4 S50. Contactless Chip Card Module Specification. This document gives specifications for the product MF1 MOA4 S50.

PCMFxUSB3B/C series. Common-mode EMI filter for differential channels with integrated bidirectional ESD protection

Low forward voltage Ultra small SMD plastic package Low capacitance Flat leads: excellent coplanarity and improved thermal behavior

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

IMPORTANT NOTICE. use

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Dual back-to-back Zener diode

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

550 MHz, 34 db gain push-pull amplifier

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PMEG2010EH; PMEG2010EJ; PMEG2010ET

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PMEG1030EH; PMEG1030EJ

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PMEG3015EH; PMEG3015EJ

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

IP4770/71/72CZ Applications. 4. Ordering information. Functional diagram. NXP Semiconductors. VGA/video interface with ESD protection

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

1.8 V, wide bandwidth, 4 differential channel, 2 : 1 multiplexer/demultiplexer switch

D (double) Package type descriptive code. TSSOP8 Package type industry code. TSSOP8 Package style descriptive code

Transcription:

IP4284CZ10-TB; IP4284CZ10-TT Rev. 02 1 pril 2010 Product data sheet 1. Product profile 1.1 General description The devices are designed to protect high-speed interfaces such as High-Definition Multimedia Interface (HDMI), DisplayPort, SuperSpeed USB, external Serial dvanced Technology ttachment (est) and Low Voltage Differential Signaling (LVDS) interfaces against ElectroStatic Discharge (ESD). The devices include high-level ESD protection diodes for ultra high-speed signal lines and are available in two package variants: XSON10U and TSSOP10. ll signal lines are protected by a special diode configuration offering ultra low line capacitance of only 0.5 pf. These diodes provide protection to downstream components from ESD voltages up to ±8 kv contact according to IEC 61000-4-2, level 4. 1.2 Features and benefits Pb-free, Restriction of Hazardous Substances (RoHS) compliant and free of halogen and antimony (Dark Green compliant) System ESD protection for USB 2.0 and USB SuperSpeed 3.0, HDMI 1.3 and HDMI 1.4, DisplayPort, est and LVDS ll signal lines with integrated rail-to-rail clamping diodes for downstream ESD protection of ±8 kv according to IEC 61000-4-2, level 4 Matched 0.5 mm trace spacing Signal lines with 0.05 pf matching capacitance between signal pairs Line capacitance of only 0.5 pf for each channel 4-channel, XSON10U or TSSOP10 Pb-free package Design-friendly pass-thru signal routing 1.3 pplications The devices are designed for high-speed receiver and transmitter port protection: TVs, monitors DVD recorders and players Notebooks, mother boards, graphic cards and ports Set-top boxes and game consoles

2. Pinning information Table 1. Pinning Pin Symbol Description Simplified outline Graphic symbol IP4284CZ10-TB (SOT1059-1) 1 CH1 channel 1 ESD protection 2 CH2 channel 2 ESD protection 1 2 4 5 1 10 3 GND ground 4 CH3 channel 3 ESD protection 2 9 5 CH4 channel 4 ESD protection 6 n.c. not connected 3 8 7 n.c. not connected 3, 8 018aaa001 8 GND ground 4 7 9 n.c. not connected 10 n.c. not connected 5 6 IP4284CZ10-TT (SOT552-1) 1 CH1 channel 1 ESD protection 2 CH2 channel 2 ESD protection 3 GND ground 4 CH3 channel 3 ESD protection 5 CH4 channel 4 ESD protection 6 n.c. not connected 7 n.c. not connected 8 GND ground 9 n.c. not connected 10 n.c. not connected Transparent top view XSON10U 10 6 1 2 4 5 3, 8 018aaa001 1 5 TSSOP10 3. Ordering information Table 2. Type number Ordering information Package Name Description Version IP4284CZ10-TB XSON10U plastic extremely thin small outline package; no leads; 10 terminals; SOT1059-1 UTLP based; body 1 2.5 0.5 mm IP4284CZ10-TT TSSOP10 plastic thin shrink small outline package; 10 leads; body width 3 mm SOT552-1 Product data sheet Rev. 02 1 pril 2010 2 of 15

4. Limiting values 5. Characteristics Table 3. Limiting values In accordance with the bsolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit V I input voltage 0.5 +5.5 V V ESD electrostatic discharge IEC 61000-4-2, level 4; [1] - ±8 kv voltage contact discharge T amb ambient temperature 40 +85 C T stg storage temperature 55 +125 C [1] ll pins to ground. Table 4. Characteristics T amb =25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit V BRzd Zener diode breakdown voltage I test = 1 m 6-9 V I LRzd Zener diode reverse leakage current per TMDS channel; V I =3.0V [1] This parameter is guaranteed by design. [2] Between signal pin and pin n.c. [3] Human Body Model (HBM) according to JESD22--J114D. [4] ccording to IEC 61000-4-5 and IEC 61000-4-9. - - 1 μ V F forward voltage - 0.7 - V C ch(tmds) TMDS channel f=1mhz; [1] 0.4 0.5 0.7 pf capacitance V bias =2.5V ΔC ch(tmds) C ch(mutual) TMDS channel capacitance difference mutual channel capacitance f=1mhz; V bias =2.5V f=1mhz; V bias =2.5V [1] - 0.05 - pf [1][2] - 0.07 - pf R dyn dynamic resistance I = 1 [4] positive transient - 1 - Ω negative transient - 1 - Ω V CL(ch)trt(pos) positive transient channel clamping voltage V ESD =8kV [3] - 8 - V Product data sheet Rev. 02 1 pril 2010 3 of 15

3 018aaa002 0 018aaa003 Sdd21; Scc21 (db) (1) Sdd21; NEXT (db) 3 30 (2) 9 60 15 10 6 10 7 10 8 10 9 10 10 f (Hz) 90 10 8 10 9 10 10 f (Hz) Fig 1. (1) Sdd21 (2) Scc21 normalized to 100 Ω; differential pairs at CH1/CH2 or at CH3/CH4 Mixed-mode differential and common-mode insertion loss; typical values Fig 2. Sdd21 normalized to 100 Ω; differential pairs CH1/CH2 versus CH3/CH4 Mixed-mode differential NEXT crosstalk; typical values Product data sheet Rev. 02 1 pril 2010 4 of 15

018aaa004 018aaa005 5 Gbit/s; USB 3.0 CP0 pattern 5 Gbit/s; USB 3.0 CP0 pattern Fig 3. Eye diagram using reference PCB Fig 4. Eye diagram using IP4284CZ10-TB 0.4 018aaa006 C d (pf) 0.2 (1) 0.0 (2) 0.2 0.4 0.5 1.5 3.5 5.5 V bias (V) (1) Pin 2 (2) Pin 1 Deviation from typical capacitance normalized at V bias =2.5V Fig 5. Line capacitance as a function of bias voltage; typical values Product data sheet Rev. 02 1 pril 2010 5 of 15

8.5 018aaa008 3.5 018aaa007 V CL (V) V CL (V) 3.0 8.0 2.5 7.5 2.0 7.0 0.5 1.0 1.5 2.0 2.5 I () 1.5 0.5 1.0 1.5 2.0 2.5 I () IEC 61000-4-5; t p =8/20μs; positive pulse IEC 61000-4-5; t p =8/20μs; negative pulse Fig 6. Dynamic resistance with positive clamping Fig 7. Dynamic resistance with negative clamping 18 018aaa009 0 018aaa010 V CL (V) V CL (V) 4 12 8 6 12 0 0 2 4 6 8 10 12 14 I () 16 16 12 8 4 0 I () t p = 100 ns; Transmission Line Pulse (TLP) t p = 100 ns; Transmission Line Pulse (TLP) Fig 8. Dynamic resistance with positive clamping Fig 9. Dynamic resistance with negative clamping Product data sheet Rev. 02 1 pril 2010 6 of 15

6. pplication information The devices are designed to provide high-level ESD protection for high-speed serial data buses such as HDMI, DisplayPort, est and LVDS data lines. When designing the Printed-Circuit Board (PCB), careful consideration should be given to basic high-speed routing guidelines, impedance matching, and signal coupling. Basic application diagrams for the ESD protection of an HDMI interface are shown in Figure 10 and Figure 11. IP4284CZ10-TB 5 TMDS_CH2+ TMDS_D2+ 8 4 3 2 1 TMDS_CH2 GND TMDS_CH1+ TMDS_CH1 TMDS_D2 TMDS_D1+ TMDS_D1 8 IP4284CZ10-TB 5 4 3 2 1 TMDS_CH2+ TMDS_CH2 GND TMDS_CH1+ TMDS_CH1 TMDS_D0+ TMDS_D0 TMDS_CLK+ TMDS_CLK HDMI CONNECTOR CEC n.c. DDC_CLK DDC_DT GND +5 V HOT PLUG DETECTION 6 5 4 IP4221CZ6 100 nf 1 2 3 018aaa011 Fig 10. pplication diagram of HDMI ESD protection using IP4284CZ10-TB Product data sheet Rev. 02 1 pril 2010 7 of 15

IP4284CZ10-TT TMDS_D2+ TMDS_D2 TMDS_D2+ TMDS_D2 TMDS_D1+ TMDS_D1 IP4284CZ10-TT TMDS_D0+ TMDS_D0 TMDS_D1+ TMDS_D1 TMDS_D0+ TMDS_D0 TMDS_CLK+ TMDS_CLK1 TMDS_CLK+ TMDS_CLK HDMI CONNECTOR CEC n.c. DDC_CLK DDC_DT GND +5 V HOT PLUG DETECTION IP4220CZ6 100 nf 018aaa012 Fig 11. pplication diagram of HDMI ESD protection using IP4284CZ10-TT Product data sheet Rev. 02 1 pril 2010 8 of 15

7. Package outline XSON10U: plastic extremely thin small outline package; no leads; 10 terminals; UTLP based; body 1 x 2.5 x 0.5 mm SOT1059-1 D B E terminal 1 index area 1 detail X L 1 1 e e 1 b 5 v M w M C C B y 1 C C y L 2 e 2 L 10 6 X 0 0.5 1 mm scale DIMENSIONS (mm are the original dimensions) UNIT max mm 0.5 1 0.05 0.00 b 0.25 0.15 D 2.6 2.4 E e e 1 e 2 L 1.1 0.9 0.5 2 0.6 0.4 0.2 L 1 L 2 v 0.15 0.00 0.45 0.25 0.1 w 0.05 y 0.05 y 1 0.1 OUTLINE VERSION REFERENCES IEC JEDEC JEIT SOT1059-1 - - - - - - EUROPEN PROJECTION ISSUE DTE 07-12-20 08-01-18 Fig 12. Package outline SOT1059-1 (XSON10U) Product data sheet Rev. 02 1 pril 2010 9 of 15

TSSOP10: plastic thin shrink small outline package; 10 leads; body width 3 mm SOT552-1 D E X c y H E v M Z 10 6 2 1 ( 3 ) pin 1 index L p θ 1 5 e b p w M L detail X 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT max. 1 mm 1.1 0.15 0.05 2 3 b p c D (1) E (2) e H E L L p v w y Z (1) θ 0.95 0.80 0.25 0.30 0.15 0.23 0.15 3.1 2.9 3.1 2.9 0.5 5.0 4.8 0.95 0.7 0.4 0.1 0.1 0.1 0.67 0.34 6 0 Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION REFERENCES IEC JEDEC JEIT EUROPEN PROJECTION ISSUE DTE SOT552-1 99-07-29 03-02-18 Fig 13. Package outline SOT552-1 (TSSOP10) Product data sheet Rev. 02 1 pril 2010 10 of 15

8. bbreviations Table 5. cronym DVD est ESD HBM HDMI LVDS NEXT RoHS TLP TMDS UTLP bbreviations Description Digital Versatile Disc external Serial dvanced Technology ttachment ElectroStatic Discharge Human Body Model High-Definition Multimedia Interface Low Voltage Differential Signaling Near End Crosstalk Restriction of Hazardous Substances Transmission Line Pulse Transition Minimized Differential Signaling Ultra Thin Leadless Package Product data sheet Rev. 02 1 pril 2010 11 of 15

9. Revision history Table 6. Revision history Document ID Release date Data sheet status Change notice Supersedes IP4284CZ10-TB_TT_2 20100401 Product data sheet - IP4284CZ10-TB_TT_1 Modifications: Data sheet status changed to Product data sheet IP4284CZ10-TB_TT_1 20100304 Preliminary data sheet - - Product data sheet Rev. 02 1 pril 2010 12 of 15

10. Legal information 10.1 Data sheet status Document status [1][2] Product status [3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term short data sheet is explained in section Definitions. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 10.2 Definitions Draft The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet short data sheet is an extract from a full data sheet with the same product type number(s) and title. short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 10.3 Disclaimers Limited warranty and liability Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer s own risk. pplications pplications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on a weakness or default in the customer application/use or the application/use of customer s third party customer(s) (hereinafter both referred to as pplication ). It is customer s sole responsibility to check whether the NXP Semiconductors product is suitable and fit for the pplication planned. Customer has to do all necessary testing for the pplication in order to avoid a default of the pplication and the product. NXP Semiconductors does not accept any liability in this respect. Limiting values Stress above one or more limiting values (as defined in the bsolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. Product data sheet Rev. 02 1 pril 2010 13 of 15

In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors specifications such use shall be solely at customer s own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors standard warranty and NXP Semiconductors product specifications. 10.4 Trademarks Notice: ll referenced brands, product names, service names and trademarks are the property of their respective owners. 11. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Product data sheet Rev. 02 1 pril 2010 14 of 15

12. Contents 1 Product profile.......................... 1 1.1 General description..................... 1 1.2 Features and benefits.................... 1 1.3 pplications........................... 1 2 Pinning information...................... 2 3 Ordering information..................... 2 4 Limiting values.......................... 3 5 Characteristics.......................... 3 6 pplication information................... 7 7 Package outline......................... 9 8 bbreviations.......................... 11 9 Revision history........................ 12 10 Legal information....................... 13 10.1 Data sheet status...................... 13 10.2 Definitions............................ 13 10.3 Disclaimers........................... 13 10.4 Trademarks........................... 14 11 Contact information..................... 14 12 Contents.............................. 15 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section Legal information. NXP B.V. 2010. ll rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 1 pril 2010 Document identifier: IP4284CZ10-TB_TT_2

2024 © technodocbox.com Privacy Policy | Terms of Service | Feedback