MC33903/4/5 Block Diagram. Analog, Mixed-Signal and Power Management. Legend. MCU Voltage Regulator (V DD ) Internal CAN Regulator (V CAN )

Similar documents
Implementing the MC33903/4/5 CAN and LIN system basis chip

Analog, Mixed-Signal and Power Management

Interfacing MC33903/4/5 With MC9S08DZ60

Power management Driving smart power in automotive

CM Pack Dual CAN HS Transceiver

Frequently Asked Questions

Design an Intelligent Distributed Control System with S12 MagniV Mixed-Signal MCUs

Flash Core Voltage Supply Requirements and Considerations

TRK-S12ZVL Quick Start Guide. MagniV Mixed-signal MCUs for LIN Applications

Frequently Asked Questions

KIT34901EFEVB Evaluation Board

Frequently Asked Questions

High Speed CAN Transceiver

Dual high-speed CAN transceiver

Remote Keyless Entry In a Body Controller Unit Application

TxD GND V CC. RxD WAKE V IO SCLK MISO. (Top-side x-ray view) SCLK INH

VIPower M0-7 Miniaturized high-side driver family

CAN Driver Trends and Solutions for Higher Data Rate and Energy Savings

Managing Failure Detections and Using Required Components to Meet ISO7637 pulse 1 on MC33903/4/5 Common Mode Choke Implementation

SPI topics: watchdog, serial output and parity check

SBC Gen2 with CAN high speed and LIN interface

In-Vehicle Networking freescale.com/automotive

Quick Start Guide. S12VR64EVB S12 MagniV Mixed-Signal MCUs. S12 MagniV

ISO K line serial link interface

Multiple Switch Detection Interface with Suppressed Wake-Up

ISO 9001 CERTIFIED. 607 NW 27th Ave Ocala, FL Phone: (352) or Fax: (352) OPERATION MANUAL

Automotive. Quarter 2, 2012 SG187Q22012 Rev 46

Electrostatic Discharged Protection Devices (ESD) Data Sheet

SBC Gen2 with CAN High Speed and LIN Interface

Quick Start Guide TRK S12ZVFP64. S12 MagniV MCU for Automotive Heating, Ventilation and Air Conditioning (HVAC) Applications

2 Control Equipment for General Applications

Working around ERR7026 according to application needs

Industrial Controller Area Network (CAN) Applications

DS21T09 Plug and Play SCSI Terminator

35FS4500, 35FS General description. 2 Features. 3 Applications

Copyright 2011 Rockwell Automation, Inc. All rights reserved. Next Generation Guardmaster Safety Relay Platform Overview

Tutorial for Wake Up Schemes and Requirements for Automotive Communication Networks

S32K Microcontroller Press Pack

Cypress PSoC 6 Microcontrollers

UM2091 User manual. EVAL-L9301 Demo board Hardware documentation. Introduction

Multiple Switch Detection Interface with Suppressed Wake-up

NCV7420EVB. NCV7420 LIN Transceiver with Voltage Regulator Evaluation Board User's Manual EVAL BOARD USER S MANUAL

Data Sheet. QFBR-S01IN001Z Optical Phase Interrogator. Description. Features. Applications

Is this presentation suited for you?

Quick Start Guide. Dual 3-Phase Sensorless BLDC Motor Control Development Kit with Qorivva MPC5643L MCU

Application Note. Introduction. AN2461/D Rev. 0, 2/2003. Low Power Management using HCS12 and SBC devices

Serial EEPROM for Automotive New Advanced series

MM912_634, Silicon Analog Mask (M91W) / Digital Mask (N53A) Errata

Page 1 of 11 Version 1.2 Release Date: PenMount PM2204 PCI Controller Board Data Sheet. Table of contents

ARM processors driving automotive innovation

TI Designs: TIDA Power Supply Reference Design for Automotive Microcontroller in Gateway and Body Control Module

FOR IOT PRODUCT DEVELOPMENT

5 V Charge Pump HDMI Tx Companion Chip AD9394

FAN3989 USB/Charger Detection Device with Load Switch

Kinetis EA Ultra-Reliable Microcontrollers. Automotive and Industrial Applications

Integrating the MPC5643L and MC33907/08 for Safety Applications

2.5 V/3.3 V, 8-Bit, 2-Port Level Translating, Bus Switch ADG3245

QFBR-S01IN001Z. Optical Phase Interrogator. Data Sheet. Description. Features. Applications

MIGRATING TO CAN FD. Tony Adamson. Marketing Director CAN / LIN / FlexRay

Freescale s Next Generation 8-bit LCD Solutions

KITVALVECNTLEVM Valve Controller SoC Evaluation Kit

Enables prolonged battery life. Saves DC power consumption when it is not reguired.

UJA1169L. 1. General description. Mini high-speed CAN companion system basis chip

A general-purpose industrial input/output

SPC58NE84E7, SPC58NE84C3

EV-AUTO-LDOS. L5150GJ-L5300AH7-L4995AK Evaluation Board. Applications. Features. Description

Multilayer Varistors E-Series

Technical Specifications

AIM: To create a project for implement a wireless communication protocol on an embedded system- ZigBee.

ABRIDGED DATA SHEET. Automotive High-Current Step-Down Converter with USB Protection/Host Charger Adapter Emulator. Benefits and Features

TECHNICAL PRODUCT DATASHEET

SBC Gen2 with CAN High Speed and LIN Interface

Freescale Consumer and Industry Analog Products' Introduction

AZC002-04S Low Capacitance ESD Protection Array For High Speed Data Interfaces Features IEC (ESD) ±15kV (air), ±8kV (contact)

SLG4AX OSFP Low-Speed Module Controller. General Description. Pin Configuration

Low Voltage, 10-Bit Digital Temperature Sensor in 8-Lead MSOP AD7314

AS Channels Capacitive Touch Sensor IC From Santa Clara, United States of America

DS21S07AE. SCSI Terminator

Craft Port Tiny RS-232 Transceiver for Portable Applications ADM101E. Data Sheet FUNCTIONAL BLOCK DIAGRAM

MP201 Dying Gasp Storage and Release Control IC

Architecture concepts in Body Control Modules

Module Introduction. This training module provides an overview of Freescale s scalable solutions for low data rate 2.4 GHz connectivity.

ISO 9001 CERTIFIED. 607 NW 27th Ave Ocala, FL Phone: (352) or Fax: (352) OPERATION MANUAL

MIC826. General Description. Features. Applications. Typical Application

88 Dugald Campbell. Making Industrial Systems Safer Meeting the IEC standards

RazorMotion - The next level of development and evaluation is here. Highly automated driving platform for development and evaluation

Overvoltage protection with PROTEK TVS diodes in automotive electronics

Features. Description. Applications. Block Diagram PT7M3808. Fixed Voltage Diagram. Adjustable Voltage Diagram(PT7M3808G01)

Keywords: digital output driver, industrial process control, PLC, industrial automation, building automation, inductive loads

ST Enables The Wireless Charging World

STM32G0 MCU Series Efficiency at its Best

SLG4AX42397 OSFP Low-Speed Module Controller

GLS55LC200 NAND Controller (CompactFlash Interface)

PI5USB1468 PI5USB1468A

Designing with Siliconix PC Card (PCMCIA) Power Interface Switches

2.5 V/3.3 V, 16-Bit, 2-Port Level Translating, Bus Switch ADG3247

STM32G0. World s 1st USB-C TM & Power Delivery 3.0 MCU

Features. Applications. MIC4126/27/28 Block Diagram

European Conference on Nanoelectronics and Embedded Systems for Electric Mobility

SIMATIC FS600 laser scanner

Transcription:

Analog, Mixed-Signal and MC33903/4/5 System Basis Chip Gen2 with High Speed and Interface Overview The MC33903/4/5 is the second generation family of System Basis Chips, which combine several features and enhance present module designs. The device wks as an advanced power management unit f the MCU and additional integrated circuits such as senss and transceivers. It has a built-in enhanced high speed (ISO11898-2 and -5), with local and bus failure diagnostics, protection, and fail safe operation mode. The SBC may include one two 2.1/J2602-2 s with master terminal outputs. It includes wake-up input pins than can also be configured as output drivers f flexibility. This device implements multiple Low Power modes with very low-current consumption. In addition, the device is part of a family concept where pin compatibility, among the various devices with and without s, adds versatility to module design. The MC33903/4/5 also implements an innovative and advanced fail-safe state machine and concept solution. This family of devices are suppted by an enablement ecosystem that includes an evaluation board, software, EMC/ESD confmance repts and training material that allows a faster time to market and eases your designs. 33903 33903S Legend 33903D 33904 33905S 33905D MC33903/4/5 Block Diagram MCU Voltage (V DD ) Internal (V ) Flexible (I/O) Low Power Modes Secured High Speed Power Sharing (V DD BALLAST) Ballast (V AUX ) 1 2 Adv W/D

Scalability MCU power supply (V DD ): 5.0 / 150 ma (power split option f scalable needs - up to 300 ma) 5.0 regulat (V AUX ) f auxiliary loads Dedicated regulat (5 V ) f High Speed Functional Safety Innovative cranking pulse management during V DD low Fail safe & configurable state machine Enhanced protections and diagnostics Energy Savings Ultra low power modes (typ 15 µa with V DD off) Innovative Wake-up management and cyclic sense capability Robust Physical Layers Certification to 2.1, J2602-2, and ISO11898-2-5 standards Successfully certified f stringent EMC, ISO, and ESD standards Easy to Use Ecosystem to lower development time and simplify access Debug mode to save time during application development Flexibility & Compatibility: Selectable parameters ( time, W/D type, under- threshold, V AUX 3.3 ) 1 2 options (33903S, 33905S and 33903D, 33905D) Scalable (I/O pins configurable as wake-up inputs output master terminations) IDEAL COMPANION CHIP FOR MCU IN BODY, TY, AND POWERTRAIN APPLICATIONS Segment Applications Proposed FSL MCU Body Body Controller S12x, MPC560x Gateway Seat Module Do Module Lighting Control Module Column Module HVAC Cluster S12x, MPC560x, S08x Safety & Chassis Seat Belt Pre-tensioner Electric Parking Brake Steering S12x, MPC560x Power Train Fuel Pump Water Pump Glow Plug Engine Management Low End S12x, S08x S12x, MPC563x Key Characteristics Parameter Characterization MCU Linear V REG (LDO) 5.0 / Output Current (300 ma f 33903D/S, 33904, 33905D/S with optional external PNP implementation) Bus Output 33903D/S, 33905D/S only Data Rate 40 kb/s 1.0 MB/s 10.4 kb/s 20 kb/s (100 kb/s in fast mode) Low Power V DD OFF/ V DD ON Current 15/25 µa ESD - Module Level ( and ) ±8000 V Operating Voltage 5.5-28 V Maximum Input Voltage 27 VDC, 40 V (Load Dump) Operating Temperature -40 C<T A <125 C

Bus Bus Bus MC33905D Simplified Application Drawing V BAT D1 Q2 I/O-1 -TERM2-2 VBAUX 5 V Auxiliary VSUP2 H L -TERM1-1 (/) VCAUX VAUX VSUP1 Analog Moniting Interface - #2 VE Fail-safe V DD Enhanced High-speed Interface - #1 Q1 VB TXD TXD-L1 -L1 TXD-L2 -L2 LDO Linear Power Supply 5.0, up to 300 ma with an optional external ballast transist LDO Auxiliary with ballast transist (5.0 / configurable) Under- management f cranking Internal regulat f driver supply High precision V SUP sense moniting Dual configurable I/O with W/U feature B versions are recommended f new designs. Changes implemented on B versions: resolved V SUP slow ramp up behavi, enhanced device current consumption, and improved oscillat, ISO11898-2 and 11898-5 compliant 2 transceivers - 2.0, 2.1, and SAE J2602-2 compliant Freescale Part Number (s) MC33905D (Dual ) MCZ33905BD3EK/R2 MCZ33905CD3EK/R2 MCZ33905D5EK/R2 MCZ33905BD5EK/R2 MCZ33905CD5EK/R2 1 2 2 wake-up + 2 terms 3 wake-up + 1 terms 4 wake-up + no terms Yes Yes Yes SOIC 54 pins MC33905S (Single ) MCZ33905BS3EK/R2 MCZ339053EK/R2 MCZ33905S5EK/R2 MCZ33905BS5EK/R2 1 1 3 Wake-up + 1 terms 4 Wake-up + no terms Yes Yes Yes SOIC 32 pin MCZ339055EK/R2 V BAT Bus MC33905S Simplified Application Drawing V BAT D1 Q2 Q1 Bus I/O-1 I/O-3 VBAUX 5V Auxiliary VSUP2 H L -T Term (/) VCAUX VAUX VSUP1 Analog Moniting Fail-safe V DD Enhanced High-speed Interface VE VB TXD TXD-L -L LDO Linear Power Supply 5.0, up to 300 ma with an optional external ballast transist LDO Auxiliary with ballast transist (5.0 / configurable) Under management f cranking Internal regulat f driver supply High precision V SUP sense moniting Triple configurable I/O with W/U feature B versions are recommended f new designs. Changes implemented on B versions: resolved V SUP slow ramp up behavi, enhanced device current consumption, and improved oscillat, ISO11898-2 and 11898-5 compliant 1 transceiver - 2.0, 2.1, and SAE J2602-2 compliant

V BAT MC33904 Simplified Application Drawing Bus V BAT D1 Q2 VBAUX 5 V Auxiliary VSUP2 I/O-1 I/O-2 I/O-3 H L (/) VCAUX VAUX VSUP1 Analog Moniting Fail Safe VE VB V DD Enhanced High Speed Q1 TxD LDO Linear Power Supply 5.0, up to 300 ma with an optional external ballast transist LDO Auxiliary with ballast transist (5.0 / configurable) Under- management f cranking Internal regulat f driver supply High precision V SUP sense moniting Quad configurable I/O with W/U feature B versions are recommended f new designs. Changes implemented on B versions: resolved V SUP slow ramp up behavi, enhanced device current consumption, and improved oscillat transceiver: ISO11898-2 and 11898-5 compliant Freescale Part Number (s) MC33904 MCZ33904B3EK/R2 MCZ33904C3EK/R2 MCZ33904A5EK/R2 MCZ33904B5EK/R2 1 0 4 Wake-up Yes Yes Yes SOIC 32 pins MCZ33904C5EK/R2 VSUP2 H L MC33903 Simplified Application Drawing V S- VSUP1 V DD V S- Enhanced High Speed TxD LDO Linear Power Supply 5.0 V DD does not allow usage of an external PNP on the 33903. Output current limited to 150 ma Under- management f cranking Internal regulat f driver supply I/O with W/U feature B versions are recommended f new designs. Changes implemented on B versions: resolved V SUP slow ramp up behavi, enhanced device current consumption, and improved oscillat transceiver: ISO11898-2 and 11898-5 compliant Freescale Part Number (s) MC33903 MCZ33903B3EK/R2 MCZ33903C3EK/R2 MCZ33903B5EK/R2 MCZ33903C5EK/R2 1 0 1 Wake-up No No No SOIC 32 pins

MC33903D Simplified Application Drawing VSUP VE VB IO-0 H L -T1-1 -T2-2 V DD Fail-safe Analog Moniting Enhanced High-speed 2.1 Interface - #1 2.1 Interface - #2 TXD TXD-L1 -L1 TXD-L2 -L2 LDO Linear Power Supply 5.0, up to 300 ma with an optional external ballast transist Under- management f cranking Internal regulat f driver supply High precision V SUP sense moniting I/O with W/U feature B versions are recommended f new designs. Changes implemented on B versions: resolved V SUP slow ramp up behavi, enhanced device current consumption, and improved oscillat, ISO11898-2 and 11898-5 compliant 2 transceivers - 2.0, 2.1, and SAE J2602-2 compliant Freescale Part Number MC33903D (Dual ) (s) MCZ33903BD3EK/R2 MCZ33903CD3EK/R2 MCZ33903BD5EK/R2 MCZ33903CD5EK/R2 1 2 1 wake-up + 2 terms 2 wake-up + 1 terms 3 wake-up + no terms No Yes Yes SOIC 32 pins MC33903S Simplified Application Drawing VSUP VE VB I/O-3 H L V S- V DD Fail Safe Analog Moniting V S- Enhanced High Speed TXD LDO Linear Power Supply 5.0, up to 300 ma with an optional external ballast transist Under- management f cranking Internal regulat f driver supply High precision V SUP sense moniting I/O with W/U feature B versions are recommended f new designs. Changes implemented on B versions: resolved V SUP slow ramp up behavi, enhanced device current consumption, and improved oscillat, ISO11898-2 and 11898-5 compliant 1 transceiver - 2.0, 2.1, and SAE J2602-2 compliant -T V S- Term #1 2.1 Interface - #1 TXD-L -L

Freescale Part Number MC33903S (Single ) (s) MCZ33903BS3EK/R2 MCZ339033EK/R2 MCZ33903BS5EK/R2 MCZ339035EK/R2 MC33903P B C B C 1 2 Wake-up + 1 terms 3 Wake-up + no terms SOIC 32 pin expose d pad No Yes Yes MCZ33903CP5EK/R2 MCZ33903CP3EK/R2 C 0 3 Wake-up SOIC 32 pin expose d pad No Yes Yes

MC33903, MC33904, AND MC33905 KEY FEATURES AND BENEFITS Benefits Ecosystem Easy-to-Use Ecosystem Faster time to market. EVB + SW to ease SBC usage & programming. Electrical and EMC/ESD confmance repts. Training material. Energy Management Ultra Low Power Modes Innovative Wake-up Event Scalable Power Supply Best-in-class quiescent current down to 15 µa including and wake-up active. Reduces contribution of active blocks during stand-by mode. Save time during cyclic check by reducing the number of state machine transitions. This contributes in reducing overall ECU energy consumption (Energy = Current x Time). Enables platfm solution (150 ma internal supply, up to 300 ma with an optional ballast transist). System Management Flexible Fail Safe Modes Secured Innovative Cranking Pulse Management Advanced Watchdog Ease Customer Debug Mode Flexibility to address the ECU functional safety assessment and program the default fail safe behavi via hardware implementation. Fast access higher frequency combined with new register addressing methodology to save time. Parity checks. System alternative to save customer cost (PCB space, cost of capacit) while keeping some degraded functionalities during cranking mode. Improved, safer and optional Watchdog (in addition to time-out and window watchdog) implemented to avoid unpredictable Watchdog recognition, so that closed loop MCU activity can be detected. The pin is used to inhibit the watchdog during debug mode. This helps hardware and software designers save time during application development. Robust Physical Layers Certification and Car OEM Approval Process and HS P/L meets confmance tests and EMC/ESD standard requirements to secure the customer design

Development Tools Part Number KIT33903BD3EVBE KIT33903BD5EVBE KIT33905BD3EVBE KIT33905D5EKEVBE Description Evaluation board to demonstrate the key features of the MC33903 Evaluation board to demonstrate the key features of the MC33903 Evaluation board to demonstrate the key features of the MC33903/4/5 Evaluation board to demonstrate the key features of the MC33903/4/5 Documentation Document Number Title Description MC33903_4_5 Data Sheet Presents the specifications f the product SG1002 Select Guide Analog and power management device comparison SG187 Select Guide Automotive device comparison Questions Are you looking f an automotive certified High Speed and Physical Layer integrated on a single chip SBC? What is the maximum current capability of your MCU? Do you need to implement very low application quiescent current? How many wake-up sources are required by your system? Do you need to monit bus failures during netwk communications? What battery range is required by your system? What is the application behavi expected during cranking pulse? EK SUFFIX (PB-FREE) 54-PIN SOICW-EP 98ASA10506D EK SUFFIX (PB-FREE) 32-PIN SOICW-EP 98ASA10556D Freescale Semiconduct is a leading provider f over 25 years of high-perfmance products using SMARTMOS technology that combines digital, power and standard analog functions. The company supplies analog and power management ICs f the automotive, consumer, netwking and industrial markets. Freescale s analog and power ICs complement our broad ptfolio of micro controllers, microprocesss, ZigBee technology, digital signal processs, senss, with development tools and suppt to provide system solutions to customers. Do you need continuous system moniting (temperature, battery, inputs signals,...)? What are the safety level requirements of your application? Do you need external components to monit your MCU (watchdog,...)? How many regulat outputs, and what logic levels are required by your system (3.3 )? Learn Me: F current infmation about Freescale products, please visit www.freescale.com. Freescale and the Freescale logo are trademarks of Freescale Semiconduct, Inc. All other product service names are the property of their respective owners. Freescale Semiconduct, Inc., 2010-2012 All rights reserved. Document Number: MC33903_4_5FS, Rev. 6.0