Ultra Subminiature Basic Switch with plenty of terminal variations Incorporating a snapping mechanism made with two highly precise split springs that ensures long durability. Using insertion molded terminals that prevents flux penetration. In addition to self-clinching PCB, left-angled, right-angled terminals, types of soldering terminals are available. RoHS Compliant Number Legend -@@@@ 1 3 4 1. Ratings None : 15 VC 3 15 VC 1 (Low operating force) 01 : 30 VC 0.1. Maximum orce (O) None : 1.47 N {150 gf} : 0.74 N {75 gf} Note. The given values are for pin plunger models only. 4. Terminals None : PCB terminals (Straight) -T : Self-clinching PCB terminals - : PCB terminals (Right-angled) -1 : PCB terminals (Left-angled) -3 : Solder terminals - : Compact solder terminals 3. ctuator None : Pin plunger L : Hinge lever L : Hinge Roller Lever L3 : Simulated roller lever (R1.3) L30 : Simulated roller lever (R.5) 1
List of s Ratings 3 1 0.1 Maximum orce (O) * General Purpose Low orce General Purpose Low orce ctuator Terminals 1.47 N {150 gf} 0.74 N {75 gf} 1.47 N {150 gf} 0.74 N {75 gf} Pin plunger PCB terminals (Standard) - -01-01 Self-clinching PCB terminals -T --T -01-T -01-T PCB terminals (Right-angled) - -- -01- -01- PCB terminals (Left-angled) -1 --1-01-1-01-1 Solder terminals -3 --3-01-3-01-3 Compact solder terminals - -- -01- -01- Hinge lever PCB terminals (Standard) -L -L -01L -01L Self-clinching PCB terminals -L-T -L-T -01L-T -01L-T PCB terminals (Right-angled) -L- -L- -01L- -01L- PCB terminals (Left-angled) -L-1 -L-1-01L-1-01L-1 Solder terminals -L-3 -L-3-01L-3-01L-3 Compact solder terminals -L- -L- -01L- -01L- Hinge roller PCB terminals (Standard) -L -L -01L -01L lever Self-clinching PCB terminals -L-T -L-T -01L-T -01L-T PCB terminals (Right-angled) -L- -L- -01L- -01L- PCB terminals (Left-angled) -L-1 -L-1-01L-1-01L-1 Solder terminals -L-3 -L-3-01L-3-01L-3 Compact solder terminals -L- -L- -01L- -01L- Simulated roller PCB terminals (Standard) -L3 -L3-01L3-01L3 lever (R1.3) Self-clinching PCB terminals -L3-T -L3-T -01L3-T -01L3-T PCB terminals (Right-angled) -L3- -L3- -01L3- -01L3- PCB terminals (Left-angled) -L3-1 -L3-1 -01L3-1 -01L3-1 Solder terminals -L3-3 -L3-3 -01L3-3 -01L3-3 Compact solder terminals -L3- -L3- -01L3- -01L3- Simulated roller PCB terminals (Standard) -L30 -L30-01L30-01L30 lever (R.5) Self-clinching PCB terminals -L30-T -L30-T -01L30-T -01L30-T PCB terminals (Right-angled) -L30- -L30- -01L30- -01L30- PCB terminals (Left-angled) -L30-1 -L30-1 -01L30-1 -01L30-1 Solder terminals -L30-3 -L30-3 -01L30-3 -01L30-3 Compact solder terminals -L30- -L30- -01L30- -01L30- * O are value for Pin plunger. Contact orm SPT Ratings COM NO NC Contact Specifications Item models -01 models Specifications Crossbar Contact Material Silver alloy Gold alloy Gap (standard value) 0.5 mm Minimum applicable load (see note) * 100 m at 5 VC 1 m at 5 VC * Please refer to "Using Micro Loads" in "Precautions" for more information on the minimum applicable load. models -01 models Maximum orce (O) 1.47N (General-purpose) 0.74N (Low orce) 1.47N (General-purpose) 0.74N (Low orce) Rated voltage Resistive load 15 VC 3 1-30 VC 0.5 0.1 Note. The above rating values apply under the following test conditions. (1) mbient temperature: 0± C () mbient humidity: 65±5% (3) frequency: 30 operations/min pproved Safety Standard The items shown in the "List of s" above are not standard approved models. Consult your OMRON sales representative for specific models with standard approvals. UL (UL1054) /CS (CS C. No.55) Rated voltage (General-purpose) (Low operating force) -01 15 VC 3 1-30 VC 0.5 0.1
models -01 models Item 0.74 N (Low operating force) 1.47 N (General-purpose) Pin plunger models: 1 mm to 500 mm/s, Permissible operating speed Lever models: 5 mm to 500 mm/s Permissible operating frequency Mechanical Pin plunger models: 00 operations/min, Lever models: 100 operations/min 30 operations/min 100 MΩ min. (at 500 VC with insulation tester) Electrical Insulation resistance Contact resistance (initial value) 100 mω max. 50 mω max. 30 mω max. Between terminals of the same polarity 600 VC 50/60 Hz for 1min ielectric strength Between current-carrying metal parts and ground 1,500 VC 50/60 Hz for 1min Between each terminal and non-current-carrying metal parts 1,500 VC 50/60 Hz for 1min Vibration resistance * 1 Malfunction 10 to 55 Hz, -mm double amplitude Shock resistance urability 1,000 m/s {approx. 100G} max. Malfunction * 1 300 m/s {approx. 30G} max. Mechanical 1,000,000 operations min. (60 operations/min) urability * egree of protection Electrical mbient operating temperature mbient operating humidity Weight 100,000 operations min. (30 operations/min) 30,000 operations min. (30 operations/min) IEC IP40-40 C to +85 C (at ambient humidity 60% max.) (with no icing or condensation) 85% max. (for +5 C to +35 C) pprox. 0.5 g (pin plunger models) Note. The data given above are initial values. *1. The values are at ree Position and Total Travel Position values for pin plunger, and Total Travel Position value for lever. Close or open circuit of the contact is 1ms max. *. or testing conditions, consult your OMRON sales representative. Terminals/ppearances (Unit: mm) PCB terminals (Straight) Self-clinching PCB terminals <PCB Mounting imensions (Reference)> 3-1. dia. holes 3.5 3.4 1.6±0.15 5.08±0.1 1.8±0.15 1.8±0.15 1.8±0.15 ±0.05 ±0.15 PCB terminals (Right-angled) PCB terminals (Left-angled).6±0..6±0. 3.1±0. 3.1±0. 1.8±0.15 1.8±0.15 Solder terminals Compact solder terminals.4 0.5 3.5 1.. 3 0.8 dia. holes 1.8±0.15 1.6 1.8±0.15 Mounting Holes (Unit: mm) - dia. mounting holes 5 3
imensions (Unit: mm) / The following illustrations and drawings are for models with PCB terminals (straight). Self-clinching, solder, compact solder, and right-angled, left angled terminals are omitted from the following drawings. Refer to the previous page for these terminals. When ordering, replace @ with the code for the terminal that you need. See the "List of s" for available combinations of models. Pin Plunger s @ -01@ -@ -01@ +0.1 0. +0.1 0 dia. 1.7 1. 5. PT 5 +0.1 0 dia. holes 5.7.9 orce O Max. Releasing orce R Min. Pretravel PT Max. Movement ifferential M Max. -@ -01@ 1.47 N {150 gf} 0.0 N {0 gf} 0.5 mm 0.1 mm Position 5.5±0.3 mm -@ -01@ 0.74 N {75 gf} 0.5 mm 0.1 mm Hinge Lever s -L@ -01L@ -L@ -01L@ 1.8 t=0.3 * (10.8) P 3 orce O Max. Releasing orce R Min. Movement ifferential M Max. ree Position P Max. Position -L@ -01L@ 0.78 N {80 gf} 10 mm 6.8± mm -L@ -01L@ 0.5 N {5 gf} 0.0 N { gf} * Stainless-steel lever Simulated Roller Lever s (R1.3) -L3@ -01L3@ -L3@ -01L3@ 10 1.7 (7.5).1 R1.3 3 P t=0.3 * orce O Max. Releasing orce R Min. Movement ifferential M Max. ree Position P Max. Position -L3@ -01L3@ 0.78 N {80 gf} 5 mm 13 mm 8.5±1. mm -L3@ -01L3@ 0.39 N {40 gf} 0.0 N { gf} 5 mm * Stainless-steel lever Simulated Roller Lever s (R.5) -L30@ -01L30@ -L30@ -01L30@ 1.7 3.3 R.5 P 3 t=0.3 * orce O Max. Releasing orce R Min. Movement ifferential M Max. ree Position P Max. Position -L30@ -01L30@ 0.54 N {55 gf} 0.04 N {4 gf} 1.6 mm 9.5±1.0 mm -L30@ -01L30@ 0.3 N {31 gf} 0.0 N { gf} * Stainless-steel lever Note 1. Unless otherwise specified, a tolerance of ± mm applies to all dimensions. Note. The operating characteristics are for operation in the direction ( ). 4
Hinge Roller Lever s -L@ -01L@ -L@ -01L@ 1.8 (10) t=0.3 *1 4 4.8 dia..8 * 4 P (4.6) orce O Max. Releasing orce R Min. Movement ifferential M Max. ree Position P Max. Position -L@ -01L@ 0.78 N {80 gf} 16.5 mm 13± mm -L@ -01L@ 0.39 N {40 gf} 0.0 N { gf} *1. Stainless-steel lever *. Polyacetal resin roller Note 1. Unless otherwise specified, a tolerance of ± mm applies to all dimensions. Note. The operating characteristics are for operation in the direction ( ). Precautions Please refer to "Basic Switches Common Precautions" for correct use. Cautions Soldering Terminal connection When soldering, make sure that the temperature of the soldering iron tip is not higher than 300 C, and complete the soldering within 3 seconds. o not apply any external force for 1 minute after soldering. Soldering at an excessively high temperature or soldering for more than 3 seconds may deteriorate the characteristics of the Switch. Connecting to PCB terminal Boards When using automatic soldering baths, we recommend soldering at 60 C ±5 C within 5 seconds. Make sure that the liquid surface of the solder does not flow over the edge of the board. When soldering terminals manually, perform soldering within 3 seconds at iron tip temperature not higher than 350 C. o not apply any external force for at least 1 minute after soldering. When applying solder, keep the solder away from the case of the Switch and do not allow solder or flux to flow into the case. Correct Use Mounting Use M mounting screws with plane washers or spring washers to securely mount the Switch. Tighten the screws to a torque of 0.08 to 0.1 N m {0.8 to 1 kgf cm}. Using Micro Loads Using a model for ordinary loads to open or close the contact of a micro load circuit may result in faulty contact. Use models that operate in the following range. However, even when using micro load models within the following operating range, if inrush current occurs when the contact is opened or closed, it may increase the contact wear and so decrease durability. Therefore, insert a contact protection circuit where necessary. The minimum applicable load is the N-level reference value. This value indicates the malfunction reference level for the reliability level of 60% (λ60). (JIS C5003) The equation, λ60=0.5 10-6 /operation, indicates that the 1 estimated malfunction rate is less than operations,000,000 with a reliability level of 60%. Voltage (V) 30 0.16 m 16.6 m 100 m 4 1 range for micro load models -01 range for general-load models 5 1 m 0 0.1 1 10 100 1,000 Current (m) 5
pplication examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: o not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. B036-E1-11 1016(007)(O) 6