Overview The (CGESM) for the HP BladeSystem provides HP customers more integration of standard technologies they rely upon in their existing infrastructure to be optimized for the HP BladeSystem infrastructure. The CGESM is designed for seamless integration into the HP BladeSystem enclosure to take advantage of the improved efficiency, lower cost and greater flexibility of HP's blade enclosure design. The CGESM delivers 100% compatibility and consistency with well-established Cisco technology, thereby delivering investment protection for HP customers. HP BladeSystem enclosures with integrated Cisco switches dramatically reduce the number of cables required to connect servers to the network. This integration reduces networking costs per port, costs of cabling and equipment as well as improves management efficiency. HP customers can be assured that the new switches will perform and be managed in a way they have come expect. Figure 1 CGESM Front Bezel 1. Switch Status LED's 6. Rear Panel Uplink Status LED 2. Latch Assembly 7. Front Panel Uplink Status LED 3. Mode Button 8. Gigabit Ethernet Uplink LED 4. Downlink Status LED's 9. Console Port 5. Internal Cross Connect Status LED's 10. Reset Button Models and Options Models Cisco GESM Base Unit 378926-B21 Cisco GESM Base Unit populated with (2) 10/100TX/1000T RJ-45 SFP Modules 378927-B21 Options 10/100/1000 T/TX/T RJ-45 SFP Module 378928-B21 1000BASE SX Fiber SFP Module 378929-B21 NOTE: The is shipped as a single unit and should be ordered in quantities of two. The Base Unit consists of 16 GbE downlink ports to Servers, 2 GbE cross connect ports that are internal to the enclosure, 2 front panel GbE ports, and 4 Small Form-Factor Pluggable (SFP) ports in the rear panel. DA - 12164 Worldwide Version 1 February 14, 2005 Page 1
Overview At A Glance Management - The CGESM is fully compatible with Cisco CiscoWorks Software, providing extensive management using SNMP network management platforms. Quality of Service - The CGESM provides superior multilayer, granular QoS features to avoid congestion and help ensure that network traffic is properly classified and prioritized. Scalability - Designed to optimize network performance while reducing network downtime, maintaining mission-critical applications, and lowering total cost of ownership. The CGESM is fully compatible in the Cisco Business Ready Data network. Security - The CGESM provides a rich set of tools for securing application data across the network assuring privacy to users and data, while restricting unauthorized network access and attacks. Performance Wire speed performance on all ports. 6 uplink ports are available in combinations of Copper and/or Fiber SFP connections. The front panel houses (2) RJ-45 Gigabit Ethernet ports and the back of the CGESM supports and additional (4) media-independent Gigabit SFP (Small Form-Factor Pluggable) ports. 2 internal Gigabit Ethernet cross-connect ports link a pair of CGESM switches within the enclosure. These ports are administratively turned off by default and are easily enabled to provide switch redundancy for Servers. Management Managed with CiscoWorks, the CGESM can be configured and managed to deliver end-to-end device, VLAN, traffic, ACL's QoS, and policy management. For enhanced traffic management, monitoring, and analysis, the Embedded Remote Monitoring (RMON) software agent supports 4 RMON groups (history, statistics, alarms, and events). Cisco Device Manager Software provides an easy-to-use, Web-based management interface through a standard Web browser. The Web interface enables less-skilled personnel to quickly and simply set up switches, thereby reducing the cost of deployment. SNMP v1, v2c, and v3 and Telnet interface support deliver comprehensive in-band management, and a CLI-based management console provides detailed out-of-band management. CGESM IOS CLI support provides a common user interface and command set with all Cisco routers and Cisco Catalyst desktop switches. Compatibility ProLiant Servers ProLiant BL p-class Server Blade Enclosures ProLiant BL p-class Media Options BL20p BL20pG2 BL20pG3 BL25p BL30p BL35p BL40p BL p-class Server Blade Enclosure BL p-class Server Blade Enclosure with enhanced backplane components Cisco RJ-45 10/100/1000 T/TX/T SFP Module Cisco Fiber SX SFP Module ProLiant BL p-class Storage Connectivity Kit (with pair of OctalFC Interconnect Modules and two Fibre Channel signal conditioning cards) DA - 12164 Worldwide Version 1 February 14, 2005 Page 2
Overview ProLiant BL p-class Server Blade Enclosure ProLiant BL p-class Server Blade Enclosures 6U (10.5-inch), 19-inch wide Holds up to 8 ProLiant full height or 16 half height servers blades 10 bays per server blade enclosure 8 bays for server blades 2 outside bays for switches or patch panels Server blades blind mate into the server blade enclosure backplane for power and data connections NOTE: ProLiant BL p-class server blade enclosures with enhanced backplane components might be required depending on which blade server model is selected. NOTE: Server Blade Enclosure Upgrade Kit (354100-B21) contains enhanced backplane components and enables a field upgrade of a blade enclosure to support specific BL25p and BL35p models and provide a single, physical ilo port for the enclosure. Server blade management module attached to the back of each BL p-class 6U server blade enclosure to report events all servers and provide asset and inventory information ProLiant BL p-class Power Requirements Redundant 200V - 240V AC, 30 amp single-phase for NA and International Redundant 208V 30amp 3-phase 4 wire, NA Redundant 380-415V 20A 3-phase 5 wire, Intl Redundant -48VDC ± 10% Required Network Cabling 10Base-T 100Base-TX 1000Base-T 1000Base-SX Categories 3, 4 or 5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters) Category 5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters) Category 5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters) 50/125 µm Multimode Fiber, 400 MHz/Km (500 meters) 50/125 µm Multimode Fiber, 500 MHz/Km (550 meters) 62.5/125 µm Multimode Fiber, 160 MHz/Km (220 meters) 62.5/125 µm Multimode Fiber, 200 MHz/Km (275 meters) DA - 12164 Worldwide Version 1 February 14, 2005 Page 3
Overview Service and Support Three-year limited warranty, including hardware diagnostic support, pre-failure warranty (coverage of hard drives, memory and processors). The warranty is fully supported by HP Services and a worldwide network of resellers and service providers. In addition 90-day's getting started software telephone support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services. NOTE: Server Switch Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. NOTE: Server Blade Enclosure and Interconnects Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical. A full range of HP Care Pack hardware and software services are available including: Installation and start up Education courses Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call window with options including 4-hour response or 6-hour Call To Repair Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMWare-based IT solutions helping to deliver high level of application availability. Response times range from 30 mins for critical problems to 2 hours. System Management, Performance Services and Mission Critical Support Solution HP Care Pack services for ProLiant BL p-class server blades, cover the server blade and the p-class blade enclosure that the server blade is installed in as well as interconnects, power enclosure with power supplies and power distribution. NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at: http://www.hp.com/hps NOTE: Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html DA - 12164 Worldwide Version 1 February 14, 2005 Page 4
Overview Service and Support Offerings (HP Care Pack Services) NOTE: The HP Care Pack services for ProLiant BL p-class server blades, cover the server blade and the p-class blade enclosure that the server blade is installed in as well as interconnects, power enclosure with power supplies and power distribution. Hardware Services On-site Service Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic Installation & Start-up Services ProLiant BL p-class Blade Server Hardware Installation ProLiant BL p-class Blade Server Hardware Installation, Electronic ProLiant BL p-class Enclosure and Server Blade Hardware Installation ProLiant BL p-class Enclosure and Server Blade Hardware Installation, Electronic Provides for the Installation and Start-up of ProLiant Essentials Rapid Deployment Pack on a Customer supplied server designated as a Deployment Server. Includes the deployment of a single server. This new server will be deployed using either one of the pre-configured scripts or an image. In addition, the service will provide for the capture and storage of the configuration of the newly deployed server and orientation on product usage. To be delivered during standard office ours, standard office days. Provides for the Installation and Start-up of ProLiant Essentials Rapid Deployment Pack on a Customer supplied server designated as a Deployment Server. Includes the deployment of a single server. This new server will be deployed using either one of the pre-configured scripts or an image. In addition, the service will provide for the capture and storage of the configuration of the newly deployed server and orientation on product usage. To be delivered during standard office ours, standard office days. Electronic. NOTE: For more information, customer/resellers can contact http://www.hp.com/hps/carepack/services/ UA203A UA203E UA204A UA204E UA205A UA205E UA206A UA206E UA219A UA219E U4971A U4971E U5683A U5683E DA - 12164 Worldwide Version 1 February 14, 2005 Page 5
Technical Specifications Shipping Dimensions Length Width Height Shipping Weight 16.5 lbs. Product Specifications Performance Hardware Enclosure Level Features Connectors and Cabling 36.5 in. 15.5 in. 7.75 in. 128MB DRAM Memory 16MB Flash Memory 9018 Bytes Jumbo Frames MTU 8000 MAC/physical address Table Size 28 Gbps Maximum Forwarding Bandwidth 38.7mpps Maximum Forwarding Rate (64 Byte Packets) Non-blocking architecture Wire Speed Performance on all ports Passive Chassis Backplane Signal Front Panel Management Access Hot Swap Switches Mix/Match Switches Inside Chassis Pass-through of Fibre Channel Connections Port Auto Negotiation Port Auto Sensing Port MDI/MDI-X Auto Sensing Storm Control 2 Switches/Chassis UDLD Uni-Directional Link Detection Integrated Lights Out (ilo)management Module Comments 8 port Fiber Channel Module Support (6) Copper or Copper/Fiber Combo External Uplink Ports Up to (4) 10/100/1000T and 1000SX SFP Modules rear "Uplink" external Ethernet ports (2) 10/100/1000T Internal pre-configured "crosslink" Ethernet ports (16) 10/100/1000T Internal pre-configured "downlink" Ethernet ports (2) 10/100/1000T (at front) External Management ports External serial management port Indicators Dimensions Weight Environmental Ranges Power Specification 10BASE-T ports: RJ-45 connectors; 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling 100BASE-TX ports: RJ-45 connectors; 2-pair Category 5 UTP cabling 1000BASE-T ports: RJ-45 connectors; 2-pair Category 5 UTP cabling 1000BASE-T SFP-based ports: RJ-45 connectors, 2-pair Category 5 UTP cabling 1000BASE-SX, SFP-based ports: LC fiber connectors (single-mode or multimode fiber) Management console port: RJ-45-to-DB9 cable for PC connections Per-port status LEDs: link integrity, disabled, activity, speed, and full-duplex indications System-status LEDs: system, and bandwidth-utilization indications (W x D x H) 1.6 x 28.4 x 10.4 in. 4.06 x 71.12 x 26.42 cm. 11.6 lb. 5.23 kg. Operating temperature: 50 to 95ºF (10 to 35ºC) Storage temperature: -22 to 140ºF (-30 to 60ºC) Operating relative humidity: 20 to 85 percent (noncondensing) Operating altitude: Up to 10,000 ft (3049 m) Storage altitude: Up to 15,000 ft (4573 m) Power Consumption 125W Product Specifications Software Security Features 802.1x Dynamic VLAN 802.1x Guest VLAN 802.1x Port Security 802.1x Voice VLAN DA - 12164 Worldwide Version 1 February 14, 2005 Page 6
Technical Specifications Spanning Tree Features Trunking Features VLAN Features Cisco BPDU Guard Cisco ACL Compatible Configurable Telnet and HTTP socket port numbers Configurable user interface time-out period Disable web and Telnet access to user interfaces Kerberos Limit IP-based management stations that can access switch MAC address packet filtering (layer 2 access control) Port MAC lockout Port Security RADIUS Accounting RADIUS Authentication & Authorization RSPAN Remote Switch Port Analyzer SCP (Secure Copy Protocol) SNMP (Simple Network Management Protocol) v3 SSH (Secure Shell) SSL (Secure Sockets Layer) TACACS + User interface multi-user password protected accounts 802.1D Spanning Tree Protocol 802.1s Multiple Spanning-Tree Protocol 802.1w Rapid Spanning Tree Protocol Cisco Reduced MAC Addresses Cisco Root Guard Cisco PVRST+ (Per VLAN Rapid Spanning Tree) Cisco PVST+ (Per VLAN Spanning Tree) STP Port Configuration Options 128 STP (Spanning Tree Protocol) Instances 802.3ad Trunking 802.3x Flow control Cisco Ether channel Compatible Cisco Uplink Fast Cisco DTP (Dynamic VLAN Trunking Protocol) Cisco VTP (VLAN Trunk Protocol pruning) Cisco ISL (Intraswitch Link) Cisco BackboneFast Cisco BPDU Filter Cisco PortFast LACP (Link Aggregation Control Protocol) Cisco PAgP (Port Aggregation Protocol) 12 Multi-Port Trunked Groups 6 Ports per Trunk 802.1Q Port-based tagged VLANs GVRP (Group VLAN Registration Protocol) IGMP (Internet Group Management Protocol ) Snooping IGMP Multicast v.1 and v.2 1000 Local Proxy Address Resolution Protocol (ARP) 1024 Max Multicast Groups 4000 Max 802.1Q VLANs/Tagging Max VLAN ID's MVR (Multicast VLAN Registration) Priority queues RSVP VLAN Filtering DA - 12164 Worldwide Version 1 February 14, 2005 Page 7
Technical Specifications Quality of Service Features Management Features VMPS (VLAN Management Policy Server) 802.1p Packet Prioritization 802.3x Full Duplex Flow Control L2 QoS (Source and Destination MAC Address) L3 QoS (Source and Destination IP Address) L4 QoS (TCP/UDP port numbers) Priority Levels Up to 64 Rate Limiting/Policing IP DSCP (Differentiated Services Code Point) 4 Egress Queues Strict Policy Shaped Round Robin Weighted Tail Drop BOOTP Redundant Configuration Files in memory Redundant OS in memory DHCP DHCP Auto configuration DHCP Relay DNS Enterprise platform management software Extensive list of MIBs/trap monitors HTTP Manage on per port basis Manage switch and all servers from single port Menu driven interface SNTP (Simple Network Time Protocol) NTP (Network Time Protocol) Out of band Ethernet management access Port Mirroring RMON 1 and 2 (6 group) Syslog Scriptable CLI Serial port access Stand alone Management Software Support for 3rd party SNMP managers Switch metrics reporting and trending SMON (Switch Monitoring) Telnet FTP, TFTP and HTTP file transfer TraceRoute Web user interface Cisco Cluster Management Cisco Discovery Protocol (CDP) Cisco GEC (Gigabit EtherChannel) Cisco FEC (Fast EtherChannel) Management and Standards Support Management Information Base (MIB) Support BRIDGE-MIB (RFC1493) CISCO-CDP-MIB CISCO-CLUSTER-MIB CISCO-CONFIG-MAN-MIB CISCO-ENTITY-FRU-CONTROL-MIB CISCO-ENVMON-MIB CISCO-FLASH-MIB DA - 12164 Worldwide Version 1 February 14, 2005 Page 8
Technical Specifications CISCO-FTP-CLIENT-MIB CISCO-IGMP-FILTER-MIB CISCO-IMAGE-MIB CISCO IP-STAT-MIB CISCO-MAC-NOTIFICATION-MIB CISCO-MEMORY-POOL-MIB CISCO-PAGP-MIB CISCO-PING-MIB CISCO-PROCESS-MIB CISCO-RTTMON-MIB CISCO-STP-EXTENSIONS-MIB CISCO-SYSLOG-MIB CISCO-TCP-MIB CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB CISCO-VLAN-MEMBERSHIP-MIB CISCO-VTP-MIB ENTITY-MIB ETHERLIKE-MIB IF-MIB (in and out counters for VLANs are not supported) IGMP-MIB OLD-CISCO-CHASSIS-MIB OLD-CISCO-FLASH-MIB OLD-CISCO-INTERFACES-MIB OLD-CISCO-IP-MIB OLD-CISCO-SYS-MIB OLD-CISCO-TCP-MIB OLD-CISCO-TS-MIB RFC1213-MIB (per the agent capabilities specified in the CISCO-RFC1213-CAPABILITY.my) RFC1253-MIB RMON-MIB RMON2-MIB SNMP-FRAMEWORK-MIB SNMP-MPD-MIB SNMP-NOTIFICATION-MIB SNMP-TARGET-MIB SNMPv2-MIB TCP-MIB UDP-MIB Standards IEEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.3ad IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning-Tree Protocol IEEE 802.1p CoS Prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification 1000BASE-X (SFP) 1000BASE-SX 1000BASE-LX/LH DA - 12164 Worldwide Version 1 February 14, 2005 Page 9
Technical Specifications 1000BASE-ZX RMON I and II standards SNMPv1, SNMPv2c, and SNMPv3 Safety and Compliance Safety Certifications UL to UL 60950, Third Edition C-UL to CAN/CSA C22.2 No. 60950-00, Third Edition TUV/GS to EN 60950:2000 CB to IEC 60950 with all country deviations NOM to NOM-019-SCFI CE Marking Electromagnetic Emissions FCC Part 15 Class A Certifications FCC Part 15 EN 55022: 1998 (CISPR22) Class A EN 55024: 1998 (CISPR24) VCCI Class A AS/NZS 3548 Class A CE CNS 13438 Class A MIC CD MIC Copyright 2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Cisco, CiscoWorks, and Cisco Catalyst are US registered trademarks of Cisco Systems Corporation. Microsoft and Windows are US registered trademarks of Microsoft Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. DA - 12164 Worldwide Version 1 February 14, 2005 Page 10