Qvidian Proposal Automation Global Settings Guide

Qvidian Proposal Automation Global Settings Guide Version 11.07-11/16/2017

Copyright Copyright 2017 Qvidian. All rights reserved. Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or any means electronic or mechanical, including photocopying and recording for any purpose other than the purchaser's personal use without the written permission of Qvidian. Qvidian 10101 Alliance Road Cincinnati, OH 45242 800.272.0047 Trademarks Microsoft, Excel, PowerPoint, and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Qvidian Proposal Automation Global Settings Guide i

CONTENTS Introduction 1 Modify a global setting 1 List of global settings 1 AddBookmarkURL 1 AllowBuildWithDisabledSelections 1 AllowDuplicateProjectTitles 2 AllowHTMLEditor 2 AllowInlineEditingOfDOCXContent 2 AllowPresentationBuildWithoutTemplate 2 AllowProjectCreation 2 AlwaysAlphabetizeItems 2 ApplyTemplatePostBuild 2 AuthenticateDownloadLinks 3 AutomaticRFPRevisionTracking 3 BCCAddresses 3 BuildMaxWait 3 BuildToPDF 3 BuildWaitCheckFrequency 3 CleanTextRegularExpressionRemove 3 CleanTextRegularExpressionReplace 4 ClearBuiltInOfficePropertiesOnSave 4 ClearCustomOfficePropertiesOnSave 4 ContentExpiringInXDays 4 CreateSlideThumbnailOnUpload 4 DefaultContentLanguageID 4 DefaultLibraryWordSearch 4 DisableInflectionalSearch 5 DisableInflectionalSearchLCIDs 5 DisplayUserLastNameFirst 5 EmailSenderOverride 5 EmailSendTimeout 5 EnableFeedbackEmailNotifications 5 EnableGenerateURL 6 EnableInlineEditingAnswerRFPQuestions 6 EnableIPFiltering 6 EnableOffice365 6 EnableProsearchUsersRFPReadOnlyPreview 6 EnableStyleSafeRFPEditor 6 EnableSuggestedSearch 6 Qvidian Proposal Automation Global Settings Guide ii

EnforceSlideLayout 6 EventAuditRetentionDays 6 ExcelAddInInstalled 7 ExceptionsLogFile 7 FileContentSelectFilter 7 FolderSecurityCascadeMode 7 FolderStatisticsMode 7 ForceDatabaseCheck 7 ForceUpdateFileList 7 GetSchemeOption 8 GetServerOption 8 GridAutoSearchTimeout 8 HideAutoAnswer 8 IgnoreStylePreservation 8 IncludeAllSelectionsInAgenda 8 ItemContentSelectFilter 8 LibraryCompositeEditEnabled 8 LibraryCompositeSMEEditEnabled 8 LibraryMergeCodeDefaultsMode 9 LibrarySearchHistoryExpiration 9 LibraryStructureLoadTransferSize 9 LibraryTooltipTimeout 9 MaxConsecutiveEmailErrors 9 MaxFirstLevelLibraryFolders 9 MaximumContentTextExtract 9 MaximumLibraryContentExportCount 9 MaximumLibraryContentExportSize 10 MaximumSearchResultsShown 10 MCOneColumnDropDownWidth 10 MCTwoColumnDropDownWidth 10 NavigationReloadAlways 10 NewRFPRevisions_KeepAtLeastNRevisions 10 NewRFPRevisions_KeepForAtLeastNDays 10 PowerPointAddInInstalled 10 PreserveContextOnExternalSearch 11 ProjectDocumentWIPCheckoutAttemptsMax 11 QAContentSelectFilter 11 RefreshSearchAfterPropertiesUpdate 11 RemoveUnusedLayoutsWithoutTemplate 11 RemoveUnusedLayoutsWithTemplate 11 RFPAutoAnswerIgnoreSearchTerms 11 RFPDownloadStorageLength 11 RFPRevisions_KeepAtLeastNRevisions 11 RFPRevisions_KeepForAtLeastNDays 12 SearchSQLCommandTimeout 12 SecurityCascadeSQLCommandTimeout 12 Qvidian Proposal Automation Global Settings Guide iii

SelectFileAllowedFileExtensions 12 ShowBCCAddresses 12 ShowFoundInAfterSearch 12 SlideContentSelectFilter 12 SpecifyDownloadLinkType 12 SPSJobMaxWait 13 SPSJobWaitCheckFrequency 13 SQLCommandTimeout 13 SupportURL 13 SymmetricAlgorithm 13 SymmetricKey 13 Uploadblacklist 13 Uploadwhitelist 14 URLAuthorityAlias 14 UseActiveXForBulkLoading 14 UseActiveXOfficeAutomation 14 UseDocTypeCategoryFilters 14 UseDocTypeFileTypeFilters 14 UseOfficeClipboardForPowerPointContent 14 UseOfficeClipboardForWordContent 14 UserInactivityDisable 15 UserInactivityDisableInterval 15 UserInactivityLock 15 UserInactivityLockInterval 15 VerboseAppErrorMode 15 WindowSize 15 WordStartupInstalled 15 WordTemplateInstalled 16 Qvidian Proposal Automation Global Settings Guide iv

Introduction Global settings manage the behavior of predefined functions in Qvidian Proposal Automation (QPA). You can modify these settings to change your users' experience and customize QPA based on your organization's preferences and needs. For example, you can change global settings to control the visibility of the project, the types of files you can load to the library, the Sender field of emails generated by QPA, and the behavior of the Save to Clipboard function. You must have the Manage Application Settings user permission granted to have access to global settings. Caution: Global settings affect all users and may have a significant impact on your QPA instance. If you have any questions or concerns, please contact a Qvidian representative. Modify a global setting 1. Go to Administration > Application Settings > Global Settings. 2. Scroll to the setting you want to modify and double-click it, or click the setting and then click Modify. The Edit Setting screen displays for the selected setting. Note You can quickly locate a setting by typing text into the search box above the grid and then pressing Enter. 3. Modify the setting as necessary or click Default to reset the value to the default setting 4. Click Save to save the changes and close the dialog box or Cancel to close without making changes. 5. Click Save to save the changes. List of global settings The list below includes all global settings in QPA along with a description, their default value and additional notes where applicable. AddBookmarkURL Specifies the URL to use, if specified, when a user clicks on "Add Bookmark". Default is ''. " AllowBuildWithDisabledSelections Specifies whether documents can be built if some of the Selection Items have been disabled. Qvidian Proposal Automation Global Settings Guide 1

Notes: Selection Items within a document type may be disabled when architecting the document type. When a document includes disabled Selection Item(s), this setting controls whether building the document is allowed or disallowed. If set to On, the document can be built but an appropriate message is displayed. If set to "Off", the document cannot be built and an appropriate message is displayed. AllowDuplicateProjectTitles Specifies if the Qvidian application should allow duplicate Project Titles (across all document types). Setting of "On" will allow duplicates; "Off" will not. AllowHTMLEditor Allow HTML in "News and Announcements" and component Help text. AllowInlineEditingOfDOCXContent Allow content managers to enable inline editing for docx content which could cause loss of fidelity compared to editing in Microsoft Office. AllowPresentationBuildWithoutTemplate Allow building of a presentation without a template. AllowProjectCreation Enable users to create projects and collaborate with others to complete a document package. Default is Off. Notes: This setting adds the Add Project button to the Created Documents screen and the Create a Project link option, which users can add to the their Home page, to the Customize Home Page screen. AlwaysAlphabetizeItems An option to always display items alphabetized within a group for a Selection Tree without requiring manually sorting them. ApplyTemplatePostBuild Specifies if the Qvidian application should apply build templates again at the completion of the project build. Setting of "On" will apply templates; "Off" will not apply templates. Qvidian Proposal Automation Global Settings Guide 2

AuthenticateDownloadLinks Indicates whether to force QPA authentication when clicking on a download link. Values: 0: Do not authenticate. Anyone can access content via web links. 1: Prompt to authenticate when creating the link. The Require Authentication check box will display in the generate web links dialog box. If the check box is selected, only licensed QPA users can access that content via the weblink. 2: Always authenticate. Only licensed QPA users can access content via web links. 0 AutomaticRFPRevisionTracking Enable Automatic RFP Revision Tracking. BCCAddresses A list of email addresses to which all emails will be sent using BCC. BuildMaxWait Length of time (in seconds) that the application will allow a user to wait on a build to complete before reverting to an email. 240 BuildToPDF Specifies if the "Build to PDF" feature is available within Projects. Value of "On" indicates feature is available. BuildWaitCheckFrequency Frequency (in seconds) that the application will poll the server to see if a build has completed. 2 CleanTextRegularExpressionRemove Specifies regular expression to use when filtering data for removal of "junk" characters. [\u0007\u0008\u000e-\u001f\u007f\u0081\u008d\u008f\u0090\u009d\uf0b7]+ Caution: This setting should only be modified as directed by Qvidian personnel. Qvidian Proposal Automation Global Settings Guide 3

CleanTextRegularExpressionReplace Specifies regular expression to use when filtering data for replacement of "junk" characters with a space/blank. [\u0000-\u0006\u0009-\u000d]+ Caution: This setting should only be modified as directed by Qvidian personnel. ClearBuiltInOfficePropertiesOnSave Specifies if built-in Office document properties should be cleared during document saves from Office applications. Value of "On" indicates to clear the properties. ClearCustomOfficePropertiesOnSave Specifies if custom Office document properties should be cleared during document saves from Office applications. Value of "On" indicates to clear the properties. ContentExpiringInXDays Specifies number of days to use for My Expiring and All Expiring library content searches including Home page panels and library standard searches. Value of 30 indicates search for content expiring within next 30 days. 30 CreateSlideThumbnailOnUpload Specifies if thumbnail images should be generated for Microsoft PowerPoint slides during upload. Value of "On" specifies that thumbnail images will be generated during upload. If set to "Off", thumbnail images are generated the first time a slide presentation is previewed. DefaultContentLanguageID This is the default Language ID to be used when automatically adding content to the library from Architecting or when creating a new bundle within the Library. 1033 DefaultLibraryWordSearch Specifies the library default word searching method. Options are ANY or ALL. Default is ANY. ANY Qvidian Proposal Automation Global Settings Guide 4

DisableInflectionalSearch Specifies if inflectional searching is disabled for all library content searches. Value of "On" indicates inflectional searching is disabled. DisableInflectionalSearchLCIDs Specifies list of language/locale IDs (LCIDs) to disable inflectional searching for during library content searches. 1.0251E+31 DisplayUserLastNameFirst Specifies display order of full user names. Value of "On" indicates last name is displayed first. EmailSenderOverride Override the sender's email address and put the actual sender's email address in the Reply To field. Examples: noreply@qvidian.com (replaces whole email), @email-company.com (replaces only the domain). Notes: If your Qvidian generated emails are going to your users' junk mail folder, because the domain that they are generated from does not match the domain in the sender's email address, you can specify an alternative email address to use as the sender, or alter the domain of the actual sender s email address while keeping the original sender's address in the reply to field. For example: If original sender's address is a.user@yourcompany.com and the value in the EmailSenderOverride setting is notifications@qvidian.com, notifications@qvidian.com will appear as the sender and replies would go to a.user@yourcompany.com. If original sender's address is a.user@yourcompany.com and the value in the EmailSenderOverride setting is @qvidian.com, a.user@qvidian.com will appear as the sender and replies would go to a.user- @yourcompany.com. EmailSendTimeout Specifies the timeout (in seconds) for QPA Notification Email send operations (Minimum value of 5 seconds enforced). 10 EnableFeedbackEmailNotifications Enables / Disables Feedback Email Notifications. Qvidian Proposal Automation Global Settings Guide 5

EnableGenerateURL Enables/Disables the Generate URL feature for library content. EnableInlineEditingAnswerRFPQuestions Enables or disables support for inline editing within the Answer RFP Questions page. EnableIPFiltering Enable IP Filtering. EnableOffice365 Enables the Microsoft Office 365 online editing option. Users must have an Office 365 license. Notes: The Microsoft Office 365 online editing option is currently only available in review jobs. EnableProsearchUsersRFPReadOnlyPreview Enables or disables Prosearch users ability to view a read-only version of the RFP for context while answering questions. EnableStyleSafeRFPEditor Enable style-safe inline editor for RFP projects. EnableSuggestedSearch Specifies whether to display suggested search queries when users type into the Search field in the application's Navigation bar. EnforceSlideLayout Strictly enforce PowerPoint slide layouts. Setting of "On" will reset slides to match their master slide layouts. EventAuditRetentionDays Event audits older than this configured age (in days) are purged from the system daily. Value of 0 indicates no event audits will be purged. 0 Qvidian Proposal Automation Global Settings Guide 6

ExcelAddInInstalled If ActiveX is not enabled, this flag indicates if the users will have the Qvidian add-in for Microsoft Excel installed. ExceptionsLogFile Exceptions Log File (full path and filename). If specified, exceptions will be logged to the specified file. The specified path/file MUST be permissioned for writing and accessible from the IIS Server(s). FileContentSelectFilter File extensions filter for "File Content". Common_AllFiles *.- doc;*.- docm;*.docx;*.ppt;*.pptm;*.pptx;*.xls;*.xlsm;*.xlsx;*.pdf;*.jpg;*.jpeg;*.jpe;*.jfif;*.png;*.gif;*.bmp;*.tif;*.tiff;*.txt;*.log Commo WordFiles *.doc;*.docm;*.docx Common_PowerPointFiles *.ppt;*.pptm;*.pptx Common_ ExcelFiles *.xls;*.xlsm;*.xlsx Common_ImageFiles *.jpg;*.jpeg;*.jpe;*.jfif;*.png;*.gif;*.bmp;*.tif;*.tiff Common_ PDFFiles *.pdf Notes: Adding an en extension to this list makes the file type visible from selection screens. Extensions must be separated by a semicolon. FolderSecurityCascadeMode Specifies library folder security cascade mode. Value of 0 specifies use of a single SQL procedure to apply security to all selected folders; Non-zero value specifies use of a separate SQL procedure call for each folder. 0 FolderStatisticsMode Specifies library folder statistics mode. Value of 0 specifies gathering statistics without applying permissions; Non-zero value specifies gathering statistics with permissions applied. 0 ForceDatabaseCheck Specifies if the database should be checked every time when generating the Site URL. ForceUpdateFileList Automatically update unedited File List records when the original Library Content has changed. Qvidian Proposal Automation Global Settings Guide 7

GetSchemeOption Specifies the method for generating the protocol for the site URL. Possible values are "Request" (or ""), "Header" and "SchemeOverride". GetServerOption Specifies the method for generating the site URL. Possible values are "RequestURL", "Assembled" (or ""), "ServerURLOverride" and "Header". GridAutoSearchTimeout Specifies grid auto-search timeout. Value of 0 specifies that grid search will not execute until user types the Enter key. Value of non-zero specifies the number of milliseconds to wait after last keystroke before automatically executing the grid search (Minimum value of 500 is enforced). 0 HideAutoAnswer This will hide the 'Auto Answer' functionality for RFP users. IgnoreStylePreservation Specifies if the Ignore Preservation Style flag should be disregarded when uploading new RFP files. IncludeAllSelectionsInAgenda Include all selected items when a subsection is selected for Agenda Slide inclusion. ItemContentSelectFilter File extensions filter for "Item Content". Common_WordFiles *.doc;*.docm;*.docx Common_PowerPointFiles *.ppt;*.pptm;*.pptx LibraryCompositeEditEnabled Specifies if the library's composite (multiple Microsoft Word content documents combined into a single Word document) editing is enabled. LibraryCompositeSMEEditEnabled Specifies if the library's composite (multiple Word content documents combined into a single Word document) 'Send to SME' editing is enabled. Qvidian Proposal Automation Global Settings Guide 8

LibraryMergeCodeDefaultsMode Specifies Library's Merge Code Defaults Mode for Save to Clipboard, Download, and Export operations. Value of 0 (default) specifies 'Never apply merge code defaults', 1 specifies 'Always apply merge code defaults', 2 specifies 'Provide user both options'. 0 LibrarySearchHistoryExpiration Specifies the number of days to keep content library search history records. Minimum value of 7, maximum value of 365. 180 LibraryStructureLoadTransferSize Specifies the number of folders to send to the client browser in a single transfer during library configuration operations. Specifying a value lower than the number of library folders will break the library configuration operations into multiple transfers instead of a single transfer. Minimum value of 100 enforced. 1000 LibraryTooltipTimeout Specifies the duration (seconds) that the tooltip will be displayed. 2 MaxConsecutiveEmailErrors Specifies the number of attempts to send an SMTP e-mail before failing. 3 MaxFirstLevelLibraryFolders Specifies the maximum number of folders allowed at the first level under the root library folder for pre-loading when library window is opened. Exceeding this maximum will result in only the root library folder being pre-loaded. 50 MaximumContentTextExtract This is the maximum length of text to extract from content's native file. Valid length setting can range from 1 to 1000. A setting outside the valid range will be ignored and a length setting of 1000 will be used. 1000 MaximumLibraryContentExportCount Specifies the maximum number of content records allowed in a Library Export up to 2000 records. Qvidian Proposal Automation Global Settings Guide 9

500 MaximumLibraryContentExportSize Specifies the maximum size allowed for the composite file created by a Library Export up to 32 megabytes. Specifying 10, for example, limits the composite file size to 10 megabytes. 32 MaximumSearchResultsShown This is the maximum number of search results items that will be available in various Qvidian interfaces and dialogs. 250 MCOneColumnDropDownWidth Pixel width of Merge Code single column dropdown. Max value 650. 300 MCTwoColumnDropDownWidth Pixel width of Merge Code two column dropdown. Max value 550. 150 NavigationReloadAlways Specifies if the Qvidian application should always reload the Project navigation tree whenever the user changes nodes in the project, regardless of if the current node has changed. Setting of "On" will always reload; "Off" will not. NewRFPRevisions_KeepAtLeastNRevisions NEW RFP - Keep at least N revisions for each RFP Slice (Max 15). 10 NewRFPRevisions_KeepForAtLeastNDays NEW RFP - Keep RFP Slice revisions for at least N days (Max 15). 10 PowerPointAddInInstalled If ActiveX is not enabled, this flag indicates if the users will have installed the Qvidian PowerPoint Add-In or not. Qvidian Proposal Automation Global Settings Guide 10

PreserveContextOnExternalSearch Preserve search context in the current Library window when a search is executed from outside of the Library. ProjectDocumentWIPCheckoutAttemptsMax Maximum number of attempts to successfully check out RFP document before advising user the request cannot be processed since another user request is already in-progress. Note that a 2 second delay will occur between attempts. Default is 5 (Minimum value of 1 and maximum value of 15 enforced). 5 QAContentSelectFilter File extensions filter for "QA Content". Common_WordFiles *.doc;*.docm;*.docx RefreshSearchAfterPropertiesUpdate Refresh content library search results after content properties update occurs during requested content library action. Default is On. RemoveUnusedLayoutsWithoutTemplate Remove unused layouts when building a presentation without a template. RemoveUnusedLayoutsWithTemplate Remove unused layouts when building a presentation with a template. RFPAutoAnswerIgnoreSearchTerms Specifies if RFP Project View's "Auto-answer: Search Terms" includes content search terms in the search scope. Setting of "Off" includes content title and search terms in the search scope; Setting of "On" excludes content search terms from the search scope. RFPDownloadStorageLength Length of time, in days, to store copies of downloaded RFP documents. A setting of 0 days will not retain copies of RFP downloads. Default is 30. Maximum value of 1095 (3 years) enforced. 30 RFPRevisions_KeepAtLeastNRevisions Keep at least N RFP revisions. Qvidian Proposal Automation Global Settings Guide 11

10 RFPRevisions_KeepForAtLeastNDays Keep RFP revisions for at least N days. 10 SearchSQLCommandTimeout Specifies number of seconds to use as the timeout for Library Content Browse/Search SQL commands. 120 SecurityCascadeSQLCommandTimeout Specifies number of seconds to use as the timeout for Library Security Cascade SQL commands. 180 SelectFileAllowedFileExtensions Content file extensions allowed in uploader select file dialog. doc,docm,docx,ppt,pptm,pptx,xls,xlsm,xlsx,pdf,jpg,jpeg,jpe,jfif,png,gif,bmp,tif,tiff,txt,log Notes: This settings determines which files are accepted for upload into the library. Extensions must be separated by a comma. ShowBCCAddresses Determines whether any specified BCC addresses are displayed in the interface. ShowFoundInAfterSearch After each search, display the list of folders the results were found in. SlideContentSelectFilter File extensions filter for "Slide Content". Common_PowerPointFiles *.ppt;*.pptm;*.pptx SpecifyDownloadLinkType Specifies the type of generated download links, also known as web links, created for customers with mixed mode authentication. Values: 0: Only generates and displays a link that redirects to a QPA login page that includes a Single Sign-On button for SSO users if the instance is in mixed mode. Qvidian Proposal Automation Global Settings Guide 12

1: Generates and displays two separate links: a Single Sign-On link that takes SSO users directly to the content record, and an Explicit Login link that takes users to a login page. 2: Only generates and displays a Single Sign-On link. SSO users can click the link and go directly to the content record. 0. SPSJobMaxWait Length of time (in seconds) that the application will allow a user to wait on a QPA request to complete before reverting to an email. 240 SPSJobWaitCheckFrequency Frequency (in seconds) that the application will poll the server to see if a QPA request has completed. 2 SQLCommandTimeout Specifies number of seconds to use as the default timeout for SQL commands. 30 SupportURL This is the URL to take the user to when they select "Qvidian Support" from the Help menu. https://training.qvidian.com/videos/qpahelp/content/support.htm SymmetricAlgorithm Specifies the encryption algorithm to use for user passwords. Possible values are RIJNDAEL (default or if the string is empty), DES, RC2 and TRIPLEDES. SymmetricKey Specifies the encryption key to use when managing passwords. If the value is empty (default), an internal key is used. Uploadblacklist This is the list of file extensions to restrict users from uploading into a project. Files that end in any of these extensions will not be allowed. The list can have multiple extensions separated by a semicolon (for example htm;html;xml). Qvidian Proposal Automation Global Settings Guide 13

Uploadwhitelist This is the list of file extensions to allow users to upload into a project. Files that end in any of these extensions will be allowed. The list can have multiple extensions separated by a semicolon (for example htm;html;xml). URLAuthorityAlias Alternate text to be used as the Authority portion of the site URL used for the Forgot Password link, and the links sent in login-related emails. This might be used if a customer sets up a proxy and has their users go to a different URL to get to QPA. UseActiveXForBulkLoading Specifies if Qvidian should use ActiveX automation for bulk loading operations. Value of "On" specifies that ActiveX automation is enabled. UseActiveXOfficeAutomation Specifies if Qvidian should use ActiveX for Office automation. Note that browser should have "unsafe scripting" enabled for ActiveX Office automation to be fully operational. Value of "On" specifies that ActiveX automation is enabled. UseDocTypeCategoryFilters Specifies whether to display the Category filter for document types. UseDocTypeFileTypeFilters Specifies whether to display the file type filter for document types. UseOfficeClipboardForPowerPointContent Specifies if the Office clipboard should be used for Save to clipboard operations. The "On" setting will leave PowerPoint open following a Save to clipboard; "Off" will close PowerPoint and place the copied content onto the Windows clipboard. UseOfficeClipboardForWordContent Specifies if the Office clipboard should be used for "Save to clipboard" operations. Setting of "On" will leave Word open following a "Save to clipboard"; "Off" will close Word and place the copied content onto the Qvidian Proposal Automation Global Settings Guide 14

Windows clipboard. UserInactivityDisable Length of time, since the last login (in days) after which a user account will be disabled in QPA. A value of 0 means no expiration. 0 Notes: When users are deactivated, they no longer access QPA and it frees up their license. UserInactivityDisableInterval Sets the default interval of days to send notification email for UserInactivityDisable setting. Ex. 5,10,15,20,25. 0 Notes: When users are deactivated, they no longer access QPA and it frees up their license. UserInactivityLock Length of time, since the last login (in days) after which a user account will be locked out of QPA. A value of 0 means no expiration. 0 UserInactivityLockInterval Sets the default interval of days to send notification email for UserInactivityLock setting. Ex. 5,10,15,20,25. 0 VerboseAppErrorMode Specifies if exception information displayed in the Qvidian application error page is verbose or minimal. Value of "On" will include detailed exception information including full stack trace and request parameters; "Off" will display minimal exception information. WindowSize This is the maximum size (in characters) of search terms stored. 10000 WordStartupInstalled If ActiveX is not enabled, this flag indicates if the users will have installed the Qvidian Word template into the Startup folder. Qvidian Proposal Automation Global Settings Guide 15

WordTemplateInstalled If ActiveX is not enabled, this flag indicates if the users will have installed the Qvidian Word template but it did not get installed into the Startup folder. Qvidian Proposal Automation Global Settings Guide 16