This article refers to the Barracuda Backup firmware version 6.3.04 and higher, and supported versions of VMWare and Microsoft Hyper-V. Cloud LiveBoot is available to all Barracuda Backup customers with Instant Replacement and a Cloud storage subscription, and is available to all customers excluding those in Japan, Germany, and Austria. Barracuda Cloud LiveBoot supports a maximum of four virtual disks per guest virtual machine. The Restore > Cloud LiveBoot page displays details about each added virtual machine as described in Table 1. Table 1. Cloud LiveBoot Table. Column VM Name Status Revision VNC Interface Type Actions Hyper-V VMs: VM name Hard disk size used Expiration date VMware VMs: VM name Actual hard disk size Expiration date Displays the VM status: Running Not Running Stopped Failed Configuring Description Click to select the desired backup revision to restore. Displays the VNC Information details necessary to connect to the VM. Displays the selected interface option: Internal (default) Private VM External Displays the VM public IP address and password Displays the available actions based on the VM status: Stop Start Restart Download Destroy Delete Cloud LiveBoot a Virtual Machine Use the following steps to Cloud LiveBoot a VM: 1. Log in to the Barracuda Backup web interface, and go to the Restore > Cloud LiveBoot page. 2. The Revision column displays the latest revision. Click the date picker to display the Revision History calendar selector. If there are multiple revisions, you can pick a specific revision from which to boot. 3. Click Done. The Revision column displays the selected revision. When a user selects to boot the VM, the 1 / 6
selected revision boots. Connect to your Cloud LiveBooted Virtual Machine Use a Virtual Network Computing (VNC) client to connect directly to a Cloud LiveBooted VM: 1. 2. 3. Log in to Barracuda Backup, and go to Restore > Cloud LiveBoot. In the VNC column for the VM, the VNC Information details display. Open a VNC client, for example, TightVNC, and enter the VNC Information in the Remote Host field: 4. Click Connect. You should now be connected to your Cloud LiveBooted VM: 2 / 6
Manage Cloud LiveBooted Virtual Machines Use the options in the Actions column of the Cloud LiveBoot table to manage your Cloud LiveBooted VMs: Stop Click to pause the VM Restart Click to restart the VM Destroy Once you shut down a VM, click Destroy to permanently delete all changes made since the VM was started Download Click to download the VM as a VHD or VHDX file to your local system Start Click to start a new Cloud LiveBoot instance Delete Click to delete the VM from Cloud LiveBoot Change the Virtual Machine Private IP Address to a Public IP Address 1. Log in to Barracuda Backup, and go to Restore > Cloud LiveBoot. 2. In the Actions column, click Stop. 3. In the Interface Type field, click Edit, and then click External and make note of the Public IP Address and Default Gateway fields (you will need these values in a later step). 4. In the Actions column, click Start. 5. Open the VNC client again, and connect to the virtual machine: 3 / 6
6. Log in to the virtual machine, and open TCP/IPv4 Properties: 7. Enter the Public IP address values from Step 3 in to the associated fields; You can use public DNS server values such as 8.8.8.8 and 4.4.4.2: You may need a subnet calculator to calculate the subnet mask. 4 / 6
8. Click OK to apply your settings. Open a web browser and confirm that you can connect to the Internet. Two Cloud LiveBooted VMs can communicate with each other provided they are both on the same account. Note that each account is assigned a VLAN. The same is true if the VMs have a public IP address. 5 / 6
Figures 6 / 6