System Guide Technical Specification Model number Processor Chipset Memory Internal HDD/SSD Type Mountable memory Maximum size Error detection/correction Number of slots Mountable HDD Maximum size Maximum mountable number Controller Internal graphics Chip type Mountable graphics card Network function Serial Display USB *03 Interface LAN Expansion bay Audio *03 Internal 3.5 inch bay [Open] 5.25 inch bay [Open] NP8000-9011FP02/03/04/05/06 Intel Xeon Processor E3-1275v3 (3.50GHz, 8MB Cache, Quad Core) Intel Xeon Processor E3-1225v3 (3.20GHz, 8MB Cache, Quad Core) 4th Generation Intel Core i3 Processor 4330 (3.50GHz, 4MB Cache, Dual Core) Intel C226 DDR3-1600 (PC3-12800) SDRAM 4GB / 8GB 32GB *02 ECC 4 slots SATA HDD: 500GB / 1TB / 2TB (7,200rpm) SATA HDD: 4TB 2 SATA III/600 (LSI Embedded MegaRAID : RAID-0/1 supported)* 01 Intel HD Graphics P4600 (Built-in in CPU) NVIDIA Quadro K600 / NVIDIA Quadro K2000 / NVIDIA Quadro K4000 1000BASE-T / 100BASE-TX / 10BASE-T (Wake On LAN/PXE boot supported) x2 RS-232C D-sub 9 pin (16550A compatible) 1 (Rear) DP 2 (Rear), mini D-sub 15 pin 1 (Rear) (Triple monitor supported) USB 3.0 compliant 6 (Rear: 6), USB 2.0 compliant 2 (Front: 2) RJ-45 2 (Rear) Riser card Standard Option (N8006-1011) PCI Express (6) [Open] 1 slot [1] (Short size) PCI Express 3.0 supported Expansion slot *04 PCI Express (x4) [Open] 1 slot [1] (Mechanically x8, Short size) PCI Express 2.0 supported - 32 bit PCI slot [Open] - 1 slot [1] (33MHz/5V, Short size) 90 373 336 mm (Vertical mounting, stabilizers not included) Dimension (W x D x H) 160 373 336 mm (Vertical mounting, stabilizers included) 336 373 97 mm (Horizontal mounting) Weight (Maximum) Approx. 9.2 kg Power AC100/200V ±10%, 50/60Hz±3Hz Power consumption At maximum configuration *05 (under heavy load) 250VA/244W Temperature/humidity condition *06 In operation: 10-35 C / 10-80% (No condensation) In storage: -10-55 C / 10-80% (No condensation) Supported OS Attached software Headphone terminal 1 (Front), microphone terminal (Stereo) 2 (Front:1, Rear:1), Line-out (Dual-used for headphone) 1 (Rear), Line-in 1 (Rear) 2 slots [1] 1 slot (Flat type) [0] Windows 8 Pro 64 bit *01 Windows 7 Professional (SP1) 32 bit *07 Windows 7 Professional (SP1) 64 bit *07 EXPRESSBUILDER, NEC ESMPRO Manager, NEC ESMPRO Agent *1 There are some functional limitations for Windows 8 Pro 64 bit model. (RAID function not supported, some option boards not supported (LAN board)) *2 When 4GB memory is installed in Windows 7 Professional, usable memory is approximately 3GB. *3 Not all the peripherals are guaranteed to run properly. *4 The depth of the mountable board is either within 312 mm (long size), 350 mm with the retainer, 173 mm (short size), or 167.6 mm (MD2). Also, the width of the mountable board is either within 111 mm (with no "Low-Profile" indication) or within 64 mm (with "Low-Profile" indication). *5 Power consumption of the server in the maximum configuration is measured. *6 When the server is stored at low or high temperature, the system clock may run significantly faster or slower. Use of a time server (NTP server) is recommended if high accuracy is required in the system clock. *7 When installing Windows 7 Professional manually in the onboard RAID configuration or optional RAID configuration, prepare your USB memory or choose Flash FDD [N8160-86].
System Guide Workstation NP8000-9011FP02 (Express5800/53Xi (E3-1275v3/MULTI)) CPU Intel Xeon Processor E3-1275v3 (3.50 GHz, 8MB Cache, 4-core) MEM less HDD less ODD DVD Super MULTI Riser PCI Express 6, PCI Express x4 GA CPU Integrated GA NP8000-9011FP03 (Express5800/53Xi (E3-1225v3/DVD)) CPU Intel Xeon Processor E3-1225v3 (3.20 GHz, 8MB Cache, 4-core) MEM less HDD less ODD DVD ROM Riser PCI Express 6, PCI Express x4 GA CPU Integrated GA NP8000-9011FP04 (Express5800/53Xi (E3-1225v3/MULTI)) CPU Intel Xeon Processor E3-1225v3 (3.20 GHz, 8MB Cache, 4-core) MEM less HDD less ODD DVD Super MULTI Riser PCI Express 6, PCI Express x4 GA CPU Integrated GA NP8000-9011FP05 (Express5800/53Xi (Ci3-4330/DVD)) CPU Intel Core i3-4330 (3.50 GHz, 4MB Cache, 2-core) MEM less HDD less ODD DVD ROM Riser PCI Express 6, PCI Express x4 GA CPU Integrated GA NP8000-9011FP06 (Express5800/53Xi (Ci3-4330/MULTI)) CPU Intel Core i3-4330 (3.50 GHz, 4MB Cache, 2-core) MEM less HDD less ODD DVD Super MULTI Riser PCI Express 6, PCI Express x4 GA CPU Integrated GA Note on purchase The models stated above do not include memory, HDD, keyboard and mouse, which are required components for a workstation. Select your desired components from the lists. Note on configuration Windows 8 Pro system has limitations such as on-board RAID and certain optional board not supported.
System Guide CPU One processor comes standard with this workstation. CPU socket NP8000-9011FP02 Intel Xeon Processor E3-1275v3 (3.50 GHz, 8MB Cache, 4-core, Built-in graphics (HD Graphics P4600) NP8000-9011FP03 NP8000-9011FP04 Intel Xeon Processor E3-1225v3 (3.20 GHz, 8MB Cache, 4-core), Built-in graphics (HD Graphics P4600) NP8000-9011FP05 NP8000-9011FP06 4 th Generation Intel Core i3 Processor 4330 (3.50 GHz, 4MB Cache, 2-core), Built-in graphics (HD Graphics P4600) Memory board Up to four memory boards can be installed in this workstation. Select your desired memories from the list. Memory slot x4 N8002-178 8GB Memory Board 8GB, DDR3-1600 SDRAM Unbuffered, ECC memory N8002-177 4GB Memory Board 4GB, DDR3-1600 SDRAM Unbuffered, ECC memory Note on configuration Two identical memories in pair installed in a workstation works as two-way interleaved memory.
System Guide Hard disk drive (HDD) Up to two SATA HDDs can be installed in this workstation. Select a configuration below and your desired HDDs from the list. SATA HDD on-board connection SATA disk drive is connected individually or through on-board RAID connection (RAID 0/1). SATA x2 Standard SATA cable for 1 st disk drive 1 st HDD K410-311(00) SATA cable 30cm-cable for additional SATA HDD. Straight. 2 nd HDD N8050-220 2TB HDD SATA III/600, 7200 rpm, 3.5-inch N8050-219 1TB HDD SATA III/600, 7200 rpm, 3.5-inch N8050-218 500GB HDD SATA III/600, 7200 rpm, 3.5-inch Note on purchase - A SATA cable comes with this workstation for connecting one HDD. With 2 or more HDDs, the designated SATA cables should be selected. - On-board RAID is not supported for Windows 8 Pro system. - To configure RAID pack, select the same HDDs. Note on configuration See the end of this guide for HDD configurations supported by your operating systems. Optical disk drive One optical disk drive comes standard with this workstation. SATA NP8000-9011FP02 NP8000-9011FP04 NP8000-9011FP06 DVD Super Multi Drive as standard NP8000-9011FP03 NP8000-9011FP05 DVD-ROM Drive as standard
System Guide Keyboard One keyboard can be connected to this workstation. USB x6 (Rear) x2 (Front) N8170-25 104 Keyboard USB, English Mouse One mouse can be connected to this workstation. Select your desired mouse from the list. USB x6 (Rear) x2 (Front) (USB interface) N8052-06 USB 2-Button Optical Wheel Mouse 2 button optical wheel mouse. USB connection. N8170-22 Mouse 2 button optical wheel mouse. USB connection. Riser card PCI slots (PCI Express (6) and PCI Express (x4)) come standard with this workstation. By replacing the riser card, the PCI slots can be changed to PCI Express (6) and PCI (32bit). Riser card Optional N8006-1011 Riser Card (PCI) Standard - Riser Card (PCIe4) Riser card for PCI Express (6) and PCI (32bit). Riser card for PCI Express (6) and PCI Express (x4).
System Guide Graphics With built-in graphics processor installed, on-board graphics become available as a standard. By installing graphics accelerator, a greater features become available. Select your desired graphics accelerator from the list. Display (DP) x2 N8005-1004 DP-DVI conversion A cable to convert DP output to DVI-D (single-link) output. Display (one or two) Display (analog RGB) Riser card Riser card (PCI Express (6)) N8005-114 Graphics Accelerator (NVIDIA Quadro K4000) N8005-113 Graphics Accelerator (NVIDIA Quadro K2000) N8005-112 Graphics Accelerator (NVIDIA Quadro K600) Display (one) NVIDIA Quadro K4000 (3GB GDDR5) with DVI- VGA conversion NVIDIA Quadro K2000 (2GB GDDR5) with DVI- VGA conversion NVIDIA Quadro K600 (1GB GDDR3) with DVI-I interface (dual-link support), DP with DVI- VGA conversion Display (from one to three) Additional product list N8005-1001 DVI-VGA Conversion Connector A to convert DVI-I output to VGA (15- pin mini D-sub) output. N8005-1004 DP-DVI Conversion Connector A cable to convert DP output to DVI-D (singlelink) output. Internal power K410-312(00) Power Branch Cable 53Xi bifurcated cable supplies power to high-end graphics board. Graphics accelerator Note on purchase - With Quadro K4000/K2000/K600 installed, select additional DP-DVI conversion to connect two displays via DVI interface. Two displays with VGA interface cannot be connected. - With Quadro K4000 installed, select Power Branch Cable.
System Guide Network (LAN) This workstation has two LAN s to connect to external network device. Teaming feature such as AFT/ALB is supported. By installing LAN board, a connecting port can be added. Select your desired LAN board from the list. LAN Riser card X2 X1 Raiser card Connect to a network device. N8104-121 1000BASE-T (2ch) PCI Express (x4), Full height, short length N8104-126 1000BASE-T PCI Express (), Low profile/full height, short length Connect to a network device Note on purchase - Optional LAN board is not supported for Windows 8 Pro system. - When standard riser card is used with graphics accelerator, LAN board cannot be selected for slot (6). Note on configuration When AMT is set to enable, the teaming feature is disabled.
System Guide Serial port Serial device This workstation has one serial port to connect to external serial device. Note on configuration Connect to serial device The serial port in this workstation is only for connecting serial device. A dedicated or public line cannot be connected.
Other optional expansion External FDD N8160-86 Flash FDD External USB connection. 1.44MB flash memory to emulate FDD. Unable to concurrently connect two FDDs. Connection to the workstation is exclusively limited to one FDD when another FDD is connected. Note on purchase To install on-board RAID configuration, prepare your own USB memory, or select Flash FDD [N8160-86].
PCI slots supported by optional products To add PCI board to this workstation, installation location varies depending on the PCI board type. Refer the below table and select a required PCI board. PCI #1 PCI #2 PCI #1 PCI #2 Product Code Description Type PCI Express PCI Express PCI Express PCI Remarks Slot spec. 6 x4 (x8 mechanical) 6 32bit/33Mhz/5V Slot size Full Height Full Height Board size Standard riser card N8005-114 Graphics Accelerator O - O - Slot Short length Optional N8006-1011 N8005-113 Graphics Accelerator O - O - Quadro K2000 Slot Short length Quadro K4000, bifurcated power cable [K410-312(00)] required, Windows 8 not supported N8005-112 Graphics Accelerator O - O - Quadro K600 N8104-121 1000BASE-T (2ch) O *1 X O *1 - N8104-126 1000BASE-T O *1 X O *1 - Windows 8 not supported *1 PCI Express (6) slot can be used only when graphics accelerator is not installed. X: Supported (recommended position), O: Supported, -: Not supported
Supported HDD configurations When HDD is connected to this workstation, configuration supported varies depending on the connected HDD. Refer the below table and select required HDD configuration. # of HDD devices 1 unit 2 units RAID support 53Xi Pack 1 Pack 2 SATA RAID config HDD RAID config HDD Onboard Non RAID 1 O RAID 0 1 Non RAID 2 O RAID 1 2 O RAID 0 2 O RAID 0 1 RAID 0 1 O O : Supported : Not supported