Test & Certification Application Certification Process Submission Process 1. Customer contacts Qualcomm directly regarding Trademark Agreement and Brand Guidelines 2. Customer submits Test and Certification application to UL 3. UL provides quote for Test and Certification services 4. Qualcomm reviews customer status ***to be clarified*** 5. Upon acceptance UL can proceed with testing 6. Upon completion product will be listed on Qualcomm web site Marketing rights granted by Qualcomm upon: Successful compliancy Testing and Certification (via UL) Execution of Quick Charge 2.0 Trademark Agreement (via Qualcomm) Acceptance of Quick Charge 2.0 Brand Guidelines (via Qualcomm) Listing Information Products will be listed on web site after successful completion, in one of the following two Listing Categories Chipsets, Reference Designs and Modules Purpose is to show OEMs that Chipset / Reference Design / Module can meet QC 2.0 requirements when incorporated into end product Qualcomm will administer limited Logo use agreement for promotional purposes End Products Qualcomm will administer full Logo use agreement requiring placement of Icon on End Product Page 1 of 6 QuickCharge 2.0 Application_v11_031216
Certification Submission Requirements and Pricing Information Chipsets, Reference Designs and Modules Documentation o Datasheet or similar showing Identification as Class A or Class B charger Class A = 5 / 9 / 12 Volts Class B = 5 / 9 / 12 / 20 Volts Rated output current at each output voltage o Identify the IC chip that performs HVDCP detection Provide one sample for testing UL will provide Test Report and Chipset Verification to both the customer and Qualcomm Global pricing o US $1000 for Testing and Report o US $175 for Verification Listing / US $125 for Additional Listings o US $300/hour for Debugging NOTE: Fees above assume a single pass of tests executed with no failures. If failures are found or re-testing is needed, debug services can be provided at the prevailing hourly rate. End Products Documentation o Datasheet or similar showing Identification as Class A or Class B charger Class A = 5 / 9 / 12 Volts Class B = 5 / 9 / 12 / 20 Volts Rated output current at each output voltage o Identify the IC chip that performs HVDCP detection o Schematic o Bill Of Materials (BOM) o PC Board layout o Scale drawing or photo of Icon o Drawing or photo showing location of Icon on Product Provide one sample for testing UL will provide Test Report and End Product Certification to both the customer and Qualcomm Global pricing o US $1000 for Testing and Report o US $350 for Certification Listing / US $250 for Additional Listings o US $300/hour for Debugging NOTE: Fees above assume a single pass of tests executed with no failures. If failures are found or re-testing is needed, debug services can be provided at the prevailing hourly rate. Page 2 of 6 QuickCharge 2.0 Application_v11_031216
Technical Landscape Qualcomm QC 2.0 technology decreases the charge time for mobile devices by 40% to 75% while maintaining the plug-and-play ease of use of USB connectors Conventional USB Charging o 1 A at 5 V provides 15 W QC 2.0 High Voltage Charging over USB o Up to 3 A at 20 V provides up to 60 W Industry Standards Environment High Voltage Dedicated Charging Port (Quick Charge 2.0) is a proprietary technology developed and managed by Qualcomm Qualcomm controls usage of the QC 2.0 Logo Regulatory Environment Various regulatory requirements including Product Safety, EMC and Energy Efficiency will apply to chargers that incorporate the QC 2.0 technology Page 3 of 6 QuickCharge 2.0 Application_v11_031216
Applicant Information Purchase Order #: *Complete, legal business name *Street address 1 *Street address 2 *City *Zip/Postal code *First Name *Title *Telephone *State *Country Person at the applicant s address to receive Certificate or for contact *Last Name Fax No Technical Contact Firm Name Have you done business with UL before? Y / N Street Address 1 Street Address 2 City Zip/Postal code State Country Telephone Ext Fax No First Name Title Firm Name Street Address 1 Street Address 2 City Zip/Postal code Last Name Non-Technical Contact State Country Telephone Ext Fax No First Name Title Last Name Page 4 of 6 QuickCharge 2.0 Application_v11_031216
PURPOSE OF APPLICATION: Chipset / Module / Reference Design Test with Verification (US $1175.00) End Use Equipment Test with Certification (US $1350.00) Chipset / Module / Reference Design Test only (US $1000.00) End Use Equipment Test only (US $1000.00) Please Complete the Following Read carefully before answering and signing this application Applicant / Agent Certification I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Certificate, issued by UL, on behalf of Qualcomm, as a result of the representations made in this application, the applicant is responsible for (1) compliance of the equipment with the applicable technical rules and (2) In case of Market Surveillance activities requested by Qualcomm, sample will be provided in specified time frame. If the applicant is not the actual manufacturer, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the Qualcomm Quick Charge 2.0 technical requirements. (3) Fees above assume a single pass of tests executed with no failures. If failures are found or re-testing is needed, debug services can be provided at the prevailing hourly rate. Authorizing an agent to sign this application is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application. If an agent has signed this application on behalf of the applicant, a written letter of authorization has been provided by the applicant. It is understood that the letter of authorization must be submitted to the Certification Body upon request, and that the Certification Body and/ or Qualcomm reserve the right to contact the applicant directly at any time. The certificate holder is obliged to record and file all complaints concerning his certified product. At the request of the certification body the provider has to make these details available immediately free of charge and provide information on the measures taken by him to remedy justified complaints.by indicating my Acceptance below, I certify that the Applicant Name listed above is a Legal Entity, as indicated in the Applicant Name, and that I am an Authorized signatory for said Legal Entity. The Applicant Agrees to the following: i Comply with Qualcomm Quick Charge 2.0 requirements for the scope of certification; ii to supply any and all information needed for the evaluation of the products for which certification is sought; iii to make claims regarding certification only in respect of the scope for which certification has been granted; iv does not use its product certification in such a manner as to bring the Certification Body or Qualcomm into disrepute and does not make any statement regarding its product certification which the Certification Body may consider misleading or unauthorized; v upon suspension or cancellation of certification, discontinues its use of all advertising matter that contains any reference thereto and returns any certification documents as required by the certification body; vi uses certification only to indicate that products are certified in conformity with Qualcomm Quick Charge 2.0 standard; vii endeavors to ensure that no certificate or report or any part thereof is used in a misleading manner; viii in making reference to its product certification in communication media such as documents, brochure or advertising, complies with the requirements of the Certification Body and Qualcomm; ix comply with the requirements for certification and to supply any information needed for evaluation of products to be certified; x Certification Body shall periodically evaluate the marked products to confirm that they continue to conform to the standards and when so notified, applicant shall provide requested sample within 30 days of the date of request; xi keep a record of all complaints relating to product s compliance with requirements of relevant standard; make records available to Certification Body and/or Qualcomm when requested; take appropriate action with respect to such complaints and any deficiencies found in the product that affect compliance with requirements for certification; document the actions taken with respect to complaints and/or deficiencies; xii authorization for UL to provide Test Reports and any other related or support documentation to Qualcomm. Signature of Authorized Person Filing: Title: Date: Page 5 of 6 QuickCharge 2.0 Application_v11_031216
COMPLETE ITEMS BELOW IF AN AGENT SIGNS THE APPLICATION FIRM NAME: First Name Address 1 Address 2 City Zip/Postal Code Last Name State Country Telephone Ext Fax No APPLICATION/AGENT CERTIFICATION The application must be dated, and bear the original signature of either an officer of the applicant, a designated employee of the applicant located at the applicant's address, or an authorized agent. A signature includes any symbol executed or adopted by the applicant with the intent that such symbol be a signature, including symbols formed by computer-generated electronic impulses. The agent information section must be completed if an agent signs the application on behalf of the applicant. Upon completion of this form Scan and return the completed form to UL via email to: Isadore.Netto@ul.com OR Fax this form to the attention of Isadore Netto to: +1 510-661-0888 Page 6 of 6 QuickCharge 2.0 Application_v11_031216