PUSH BUTTON SWITCHES(Momentary) Series - 7 DESCRIPTION Integral Series7 Push Button Switches is a unique design wherein the operative portion is separate from the Switch Element.The Basic Switch Series 49 is used as SWITCH ELEMENT. The all metal Push Button is built for rugged operation in Machine tools and can be offered with Plunger of standard colours like White, Red, Yellow, Green, etc,. The Push Button can be fixed on the panel(dia 6 hole) and the Switch Element is clicked on to the same behind the Panel, this offers the advantage of replacing only the Switch Element at the customer end in the field, thereby saving cost. The Switching Element is Integral Series 49 Micro Reset Switch which is a snap acting momentary switch suitable for low level and power level switching. High switching reliablity is built into the design of the switch. By using a double make double-break design, the current rating is increased and the switch can also be used for DC switching. Low contact resistance and protection against surge currents, due to INDUCTIVE and CAPACITAE loading, is ensured by the design. DIMENSIONAL DETAILS SQUARE TYPE ROUND TYPE NO NO SCHEMATIC * For Switch Selection & Bracket Selection Ref. Back Sheet ALL DIMENSIONS IN mm D
MATERIALS & FINISHES ELECTRICAL SPECIFICATIONS CONTACT CONFIGURATION (Double throw two circuit) CONTACT RATING With +5gms operating force 5 Amps (Resistive load) at 8 V DC / V AC CONTACT RESISTAE milli ohms initial ELECTRICAL LIFE, operations at rated load. With lower contact-loads life will be correspondingly higher MECHANICAL LIFE, operations INSULATION RESISTAE Megohms min. DIELECTRIC STRENGTH V RMS PRETRAVEL.7 mm (max) OVERTRAVEL.5 mm (min) ORDERING INFORMATION BODY & COVER Glass filled PBT (UL approved) PLUNGER Acetal BEZEL & PLUNGER Aluminium/ABS moulded NUT G/F % Nylon FRAME Stainless Steel Brass, Silver plated Contact Refer Contact Selection. NOTE Standard/Low level combination could be used in low level or power circuits. However if low level rating is exceeded, gold plating is likely to be removed from contact interface and the switch is no longer recommended for low level currents. The switch can be ordered as given below SWITCH SELECTION BRACKET SELECTION ORDERING CODE 7 SHAPE OF BEZEL BEZEL COLOUR COLOUR OF PLUNGER Black Silver Any other (Specify) Round 8 Square 8 4 5 6 7 Black Red Yellow White Blue L.Grey Green 4 9 (Br.Ag.pltd.) Lemon Cu-(Ag.Plt) Cu-(Au.Plt) Ag-(Ag.Plt) Ag-(Au.Plt) 5 Solder Type PC Type (Straight) PCR Type (Horizontal Mounting) STANDARD / ISSUE, DCR 8 DETAILS Solder Type 5 PCR Type (Horizontal Mounting) PC Type LOW LEVEL.4 VA maximum at (DRY CIRCUITS) volts AC or DC maximum Copper alloy with gold plating over nickel barrier HIGH POWER 5A @ V AC and 8 V DC resistive load Coin silver.5a @ VAC Resistive Load Copper alloy with Silver Plating HIGH POWER/LOW LEVEL COMBINATION Coin silver with gold plating over nickel barrier D-88/, st Block, st Stage, Peenya Industrial Estate, Bangalore - 56 58, India Telefax (8) 89 77 / 89 78 / 89 79 / 89 7 An ISO 98 Company Website www.integralsys.in E-mail inty.systems@gmail.com / sales@integralsys.in D
MICRO SWITCHES SNAP ACTION Series - 4 DESCRIPTION Integral Series 4 Micro Switch is a heavy duty switch with an extra long life spring mechanism. (Has successfully been tested up to 4 million cycles) High reliability is designed into the switch which can be used in a wide variety of application such as Industrial Equipments, Business Machines, Home Appliances etc. DIMENSIONAL DETAILS TERMINAL ARRANGEMENTS SOLDER TYPE M SCREW TYPE 6. 4. NO C PC TYPE SOLDER TYPE NO.8.7.6 4.7. 4.. NO (PRE TRAVEL) 7.8. 5.8. 9.8..9.9 QUICK CONTACT C NO NO.97.8 9.. MOUNTING M KNURLED NUT PLASTIC INSULATOR M PLASTIC DOME NUT SIMULATED ROLLER LEVER TYPE.(L) M PBUSH Al. PLUNGER M6 BUSH PLASTIC PLUNGER INSULATOR F6. 6. ROLLER LEVER TYPE HINGE LEVER TYPE F.6 M.9.(L) ACTUATOR All Dimensions in mm. D
SPECIFICATIONS MATERIALS & FINISHES BODY & COVER PBT GF (UL APPROVED) PLUNGER Acetal / PA Silver Alloy Brass (Silver or Tin plated) ROCKER Brass Silver plated SPRING Beryllium Copper (If not specified, the COMMON Terminal will be Silver Plated and the NO & Terminals will be Tin Plated) CONTACT RATING OPERATING FORCE AT PIN PLUNGER Silver Alloy gmf Gold Plated Low Level gmf RATING (Resistive Load) 5A 5VAC,.5A 5VDC 4VDC ma If not specified, Standard Operating Force will be gmf. CONTACT RESISTAE INSULATION RESISTAE DIELECTRIC STRENGTH OPERATING TEMP < 5 mw Initial > MW (at 5 VDC) > VAC ( min) -5OC to +8OC HOW TO ORDER. For standard switches by describing as given below. For Special switches please consult factory with Samples/Drawings SWITCH (WITHOUT MOUNTING BRACKET) ORDERING CODE 4 - CONTACT TERMINATION ARRANGEMENTS Quick Connect Type - Ag (Ag. Plated) - Ag (Au. Plated) - SPST (NO) - SPST () - SPDT (NO-) ACTUATOR - Pin Plunger - Hinge Lever (Std. - 6 6). Roller Lever (Std. 4). Simulated Roller Lever (Std. ) Note Specify length of Lever in mm 4. Mushroom Plunger - Ag Plated 5 - Tin Plated Solder Type - Ag. Plated 6 - Tin Plated PC Type - Ag. Plated 7 - Tin Plated Screw Type 4 - Ag. Plated 8 - Tin Plated SWITCH (WITH MOUNTING BRACKET) for PANEL MOUNTING / ISSUE, DCR 8 ORDERING CODE 4 - Actuator Length - Pin Plunger For others specify COLOUR PLUNGER PLASTIC - NO CAP - Black - Red - Blue 4 - Yellow 5 - White 6 - Green 7 - Al.Plunger Anodized Black 8 - Other MOUNTING - W/O Bracket - With Bracket M x.75 bush - With Bracket M6 x.75 bush - Same as with Dome Nut 4 - Same as with Plastic Dome Nut 5 - Same as with Plastic Knurled Nut 6 - Same as with Metal Dome Nut 7 - Same as 5 with Metal Round Nut D-88/, st Block, st Stage, Peenya Industrial Estate, Bangalore - 56 58, India Telefax (8) 89 77 / 89 78 / 89 79 / 89 7 An ISO 98 Company Website www.integralsys.in E-mail inty.systems@gmail.com / sales@integralsys.in D4
MICRO PUSH SWITCHES SNAP ACTION Series - 4 Integral Micro Push Button Switch are build with high reliable Micro Switches with Snap Action momentery with butterfly Mechanism, A pari of Double Make Double Break. Switching function helps the switch to use in higher current rating & D.C application in small volume. The switches can be used in Inductive, capacitance loading and against surge current since it is protected by its design. Housing and accessories are made with fine quality of engg. Plastics for their ultimate end use. SOLDER TYPE INTEGRAL DOME NUT TYPE PC MOUNTING TYPE (w/o Bracket) ROUND NUT TYPE All Dimensions in mm. D5
MATERIALS & FINISHES ELECTRICAL SPECIFICATIONS CONTACT CONFIGURATION CONTACT RATING (Double throw two circuit) 6 Amps (Resistive load) at 8 V DC, A @ VAC CONTACT RESISTAE < milli ohms max Initial INSULATION RESISTAE @ 5V DC < Megohms min. VOLTAGE PROOF AC to minute (DIELECTRIC STRENGTH) O BODY & COVER Diallyl phthalate (DAP)/PBT PLUNGER Acetal ACTUATOR Brass, Silver plated Coin Silver, Gold plated Brass, Silver plated Coin Silver, Gold plated SPRINGS Spring steel, Natural O OPERATING TEMPERATURE - C to +85 C ELECTRICAL & MECHANICAL LIFE 5, Cycles PRETRAVEL.4 mm OVERTRAVEL.6 mm OPERATING FORCE 5 gms REALING FORCE 5 gms...5.5 ORDERING INFORMATION The switch can be ordered as given below STANDARD HIGH POWER A @ VAC Resistive Load Copper alloy with Silver plating 6A @ V AC and 8 V DC resistive load Coin silver LOW LEVEL.4 VA maximum at Copper alloy with gold plating over nickel barrier HIGH POWER/LOW LEVEL COMBINATION Coin silver with gold plating over nickel barrier / ISSUE, DCR 8 ORDERING CODE Cu-(Ag.Plt) Ag-(Ag.Plt) Cu-(Au.Plt) Ag-(Au.Plt) CONTACT 4 - NO (Single Switch) 8 - NO (Double Switch) NOTE Standard/Low level combination could be used in low level or power circuits. However if low level rating is exceeded, gold plating is likely to be removed and the switch is no longer recommended for low level currents. - Solder Type - PC Type BODY - DAP Blue - PBT Black Color of Plunger - No Plunger - Black - Red - Blue 4 - Yellow 5 - White 6 - Green 7 - Al. Plunger Anosided Black (Only M Bushes) 8 - Others MOUNTING (Metal Bush Std.) - W/O Bracket - With Metal Bracket M6x.75 Hex Nut - Same as with Metal Dome Nut - With Metal Bracket Mx.75 Hex Nut 4 - Same as with Plastic Dome Nut 5 - Same as with Metal Round Nut 6 - With Metal Bracket Mx. Hex Nut 7 - Same as 6 with Plastic Dome Nut 8 - Same as 6 with Metal Round Nut 4 D-88/, st Block, st Stage, Peenya Industrial Estate, Bangalore - 56 58, India Telefax (8) 89 77 / 89 78 / 89 79 / 89 7 An ISO 98 Company Website www.integralsys.in E-mail inty.systems@gmail.com / sales@integralsys.in D6
MICRO SWITCHES SNAP ACTION Series - 46 DESCRIPTION Integral Series 46 Micro Switches are characterized by their high functional reliability and switching accuracy. All Dimensions in mm. SPECIFICATIONS MATERIALS & FINISHES CONTACT RATING CONTACT RESISTAE LIFE (ELECTRICAL) LIFE (MECHANICAL) INSULATION RESISTAE DIELECTRIC STRENGTH 5A @ 5 V AC (Operating force of 5 + gms) <5 m ohms initial 5, Cycles @ Rated Load,, Cycles > M ohms @ 5 V DC V AC ( min.) BODY PLUNGER SPRING PBT GF() UL94V Nylon 6.6 (Black Std.,) Silver Alloy Brass, Silver / Tin Plated Stainless Steel ORDERING INFORMATION Given below are the variations possible and corresponding ing / ISSUE, DCR 8 ORDERING CODE 4 6 - Ag-Alloy - Ag-Au Plated FUTION TERMINATION ACTUATOR - NO - - NO / - Plug in type - Solder type - PC type - Mushroom plunger - Pin plunger - Hinge Lever -.5 mm - Roller Lever - 7.4 mm 4 - Simulated Roller Lever D-88/, st Block, st Stage, Peenya Industrial Estate, Bangalore - 56 58, India Telefax (8) 89 77 / 89 78 / 89 79 / 89 7 An ISO 98 Company Website www.integralsys.in E-mail inty.systems@gmail.com / sales@integralsys.in D7
MICRO SWITCHES SNAP ACTION Series 47 DESCRIPTION Integral Series 47 Micro Switch is a snap acting single pole change over switch actuated by plunger. It is a sensitive type switch intended for use in AC and DC applications, suitable for industrial and Commercial Equipment, Communication Equipment, Vending Machines, Security Systems, Data Systems, Medical Equipment, Cassette Recorders, VCR's etc. The switch is ideal due to its small size, lowg operating force and high reliability. DIMENSIONAL DETAILS Scale.5 SPECIFICATIONS MATERIALS & FINISHES CONTACT CONFIGURATION Single pole change over (Snap acting type) CONTACT RATING with 8 + gms, Operating force, Amps (Resistive Load) at 5 V AC CONTACT RESISTAE initial 5 milli ohms maximum ELECTRICAL LIFE 5, at CPM at 8V ma INSULATION RESISTAE Mimimum Meg ohms at 5 V DC DIELECTRIC STRENGTH VRMS PRE TRAVEL.6mm maximum OVER TRAVEL.4 mm maximum BODY & COVER % Glass filled PBT UL 94 V.O PLUNGER Nylon 6/6 (Block) CONTACT PINS See below under contact selection Copper Alloy Silver plated CONTACT BRIDGE Beryllium Copper / ISSUE, DCR 8 ORDER CODE Contacts & all Terminals Copper alloy silver plated Rating. Amps at 5 V AC (Resistive) Contacts Terminals Rating TERMINATION - Solder Type - PC Straight (Self Standing) Coin Silver Copper alloy silver plated Amps at 5 V AC (Resistive) or 8 V DC ACTUATOR * Contact & Terminals Rating Copper alloy Gold Plated.4 VA max @ V AC or DC (Resistive) Contacts Terminals Rating Coin silver with Gold plate over Nickel Copper alloy with Gold plate over Nickel plate.4 VA max at V AC or DC max (Resistive) or Amps at 5 V AC or 8 V DC. ORDERING CODE 4 7 * Note Levers as per customer requirements. 88 4 - Pin Plunger (std) - Short hinge lever -. - Long hinge Lever - 4. - Roller lever - 7.4 - Simulated lever All Dimensions in mm. D-88/, st Block, st Stage, Peenya Industrial Estate, Bangalore - 56 58, India Telefax (8) 89 77 / 89 78 / 89 79 / 89 7 An ISO 98 Company Website www.integralsys.in E-mail inty.systems@gmail.com / sales@integralsys.in D8
MICRO RESET SWITCHES integral SNAP ACTION Series 48 Solder / PCB Horizontal Types DESCRIPTION Integral Series 48 Micro Reset Switch is a snap acting momentary switch suitable for low level and power level switching. High switching reliability is built into the design of the switch. By using a double-make double-break design, the current rating is increased and the switch can also be used for DC switching. Low contact resistance and protection against surge currents, as in Inductive and Capacitance loading, is ensured by the design. DIMENSIONAL DETAILS (max) (max) (max) NO NO NO INTEGRAL NO All Dimensions in mm. D9
MATERIALS & FINISHES ELECTRICAL SPECIFICATIONS CONTACT CONFIGURATION (Double throw two circuit) CONTACT RATING With +5gms operating force 5 Amps (Resistive load) at 8 V DC / V AC CONTACT RESISTAE milli ohms max initial ELECTRICAL, operations at rated load. With lower contact-loads life will be correspondingly higher MECHANICAL LIFE, operations INSULATION RESISTAE Megohms min. DIELECTRIC STRENGTH V RMS PRETRAVEL.7 mm (max) OVERTRAVEL.5 mm (min) BODY Glass filled PBT (UL approved) PLUNGER Acetal NOTE Standard/Low level combination could be used in low level or power circuits. However if low level rating is exceeded, gold plating is likely to be removed and the switch is no longer recommended for low level currents. ORDERING INFORMATION The switch can be ordered as given below STANDARD.5A @ VAC Resistive Load LOW LEVEL.4 VA maximum at (DRY CIRCUITS) volts AC or DC maximum Copper alloy with gold plating over nickel barrier HIGH POWER 5A @ V AC and 8 V DC resistive load Coin silver 5 ACTUATOR 4 5 Plunger Lever Lever with Roller ORDERING CODE 4 8 4 5 6 7 No Cap Red Black Grey Green Blue Yellow White MOUNTING (Br.Ag.pltd.) Cu-(Ag.Plt) Cu-(Au.Plt) Ag-(Ag.Plt) Ag-(Au.Plt) CAP COLOUR Solder Type PC Type (Straight) PCR Type (Horizontal Mounting) HIGH POWER/LOW LEVEL COMBINATION Coin silver with gold plating over nickel barrier / ISSUE, DCR 8 (Br.Ag.pltd.) 4 5 6 W/O mounting bracket With mounting bracket M6 X.75 bush and an additional plunger Same as with Dome nut Same as with Red Plunger Side Plate with Lever (without bush) Same as with Red plunger D-88/, st Block, st Stage, Peenya Industrial Estate, Bangalore - 56 58, India Telefax (8) 89 77 / 89 78 / 89 79 / 89 7 An ISO 98 Company Website www.integralsys.in E-mail inty.systems@gmail.com / sales@integralsys.in D
MICRO PUSH SWITCHES SNAP ACTION Series - 48 Integral Micro Push Button Switch are build with high reliable Micro Switches with Snap Action momentery with butterfly Mechanism, Double Make Double Break. Switching function helps the switch to use in higher current rating & D.C application in small volume. The switches can be used in Inductive, capacitance loading and against surge current since it is protected by its design. Housing and accessories are made with fine quality of engg. Plastics for their ultimate end use. ACTUATOR DOME NUT ASSEMBLED SWITCH All Dimensions in mm. Cu-Ag.plt. Ag-Ag.plt. 48-7* 48-7* Cu-Ag.plt. Ag-Ag.plt. 484-7* 484-7* Cu-Ag.plt. Ag-Ag.plt. 48-7* 48-7* Cu-Ag.plt. Ag-Ag.plt. 484-7* 484-7* D
MATERIALS & FINISHES ELECTRICAL SPECIFICATIONS CONTACT CONFIGURATION (Double throw two circuit) CONTACT RATING With +5gms operating force 5 Amps (Resistive load) at 8 V DC / V AC CONTACT RESISTAE milli ohms max Initial ELECTRICAL, operations at rated load. With lower contact-loads life will be correspondingly higher MECHANICAL LIFE, operations INSULATION RESISTAE Megohms min. DIELECTRIC STRENGTH V RMS PRETRAVEL.7 mm (max) OVERTRAVEL.5 mm (min) BODY Glass filled PBT (UL approved) PLUNGER Acetal NOTE Standard/Low level combination could be used in low level or power circuits. However if low level rating is exceeded, gold plating is likely to be removed and the switch is no longer recommended for low level currents. ORDERING INFORMATION The switch can be ordered as given below STANDARD.5A @ VAC Resistive Load LOW LEVEL.4 VA maximum at (DRY CIRCUITS) volts AC or DC maximum Copper alloy with gold plating over nickel barrier HIGH POWER 5A @ V AC and 8 V DC resistive load Coin silver HIGH POWER/LOW LEVEL COMBINATION Coin silver with gold plating over nickel barrier / ISSUE, DCR 8 Cu-(Ag.Plt) Cu-(Au.Plt) Ag-(Ag.Plt) Ag-(Au.Plt) ORDERING CODE 4 8 - NO (Single Switch) 4 - NO (Double Switch) - Solder Type MOUNTING (Plastic Black Colour Std.) - With DomeNut - With Knurled Nut - Metal Bracket (M Round Nut) 4 - Same as with Metal Finish 5 - With Red Colour Knurled Nut 6 - Same as with metal base back nut 7 - same as with metal base back nut Color of Plunger - Red - Black - Green 4 - Yellow 7 D-88/, st Block, st Stage, Peenya Industrial Estate, Bangalore - 56 58, India Telefax (8) 89 77 / 89 78 / 89 79 / 89 7 An ISO 98 Company Website www.integralsys.in E-mail inty.systems@gmail.com / sales@integralsys.in D
TINY PUSH BUTTON SWITCHES Series 5 ( Pole - Momentary) DESCRIPTION Integral Tiny Push Switches embody all the design features of our highly popular miniature Toggle Switches such as epoxy sealing of terminals, silver inlay contacts for higher current operation, gold plated contacts for low-level circuit operation, various type of switching function, etc., P.C. versions with mounting on. (.54mm) centres with very small volume and height, save space in PCB. This data sheet offers the normally used types of the switch. Many other variations can be offered on specific enquiry. See below SWITCHING FU..54 DIA..54 TYP..5 TYP. 4.9 8. ON M6 X.75 6. DIA. POS POS MOM. CONNECTED - - SCHEMATIC (COMM) NO.94 M6 X.75.54 DIA..8 PC MOUNTING Refer Plunger Selection.54 TYP...4 TYP..76 TYP..54 TYP. TERM NOS. FOR REFEREE ONLY.5 EPOXY SEAL..76.5 TYP..5 THK. PC MOUNTING EPOXY SEAL. DIA. TYP..64 8...54 DIA..76 TYP. 4.8 EPOXY SEAL.5.76. DIA. TYP..54 TYP..5.54 DIA. PC MOUNTING.9 DIA. TYP. EPOXY SEAL 4.6.79 PC MOUNTING 8. 5.59.5 4.6 *.5 TERM. WIDTH.5 TYP..79 8.64. MOM. - MOMENTARY POSITION 4.6 SPDT PC MOUNTABLE EPOXY SEAL.79 8.64 5.59.54 TYP..5 TYP. SPDT SOLDER.54 TYP. 5.59.76 TYP..4 4.8.5 TYP. SPDT SPST SOLDER.54 TYP..76 TYP. SWITCHING FU. POS -48UNS POS 6. DIA..54 DIA. SPST.5 TYP. TERM NOS FOR REFEREE ONLY.5 SP EPOXY SEAL See below CONNECTED SCHEMATIC OFF MOM. 8. 4.9-4.6.94.5 TYP..79.79 TERM. WIDTH EPOXY SEAL.5.76 8.64 5.59 SP MOM. - MOMENTARY POSITION SPST PC MOUNTABLE TERM. NOS FOR REFEREE ONLY 5.59.5 PC MOUNTING PC MOUNTING. DIA. TYP. 8. EPOXY SEAL..76.5.54 DIA. EPOXY SEAL.5 THK...76 TYP..4 TYP..5 TYP..76 TYP. 4.8 SP(NO) TERM. NOS FOR REFEREE ONLY.5 EPOXY SEAL PC MOUNTING.5. 8. SP.78. DIA. TYP..64.54 DIA. TYP..76.76.4 5.59 TYP..4.76.46 4.8 EPOXY SEAL.5.5 TYP. SP(NO).76 TYP. All Dimensions in mm. D D
SPECIFICATIONS MATERIALS & FINISHES CONTACT RATING ELECTRICAL LIFE CONTACT RESISTAE BODY PLUNGER HOUSING BUSHING HARDWARE SWITCH SUPPORT TERMINAL SEAL See below under, make-and-break cycles at full load Below milliohms initial @ -6 V DC. ma for both silver and gold plated contacts. INSULATION RESISTAE Megohms (min) DIELECTRIC STRENGTH V RMS min. @ sea level. OPERATING TEMP. -o C to 85o C. Diallyl Phthalate (GF) Nylon / PBT Stainless Steel Brass Nickel plated Brass Nickel plated Brass electro-tin plated Epoxy See below under CONTACT SELECTION ORDERING INFORMATION Given below are the variations possible and corresponding ordering code. & ALL Copper/Copper alloy Silver plated. RATING ma @ V AC or 8 V DC END Coin silver, silver plated CENTRE & Copper alloy silver plated. ALL. RATING Amps. @ V AC or 8 V DC & Copper alloy with gold plate ALL over nickel plate. RATING.4 VA max. @ V AC or DC max. END Coin silver with gold plate over nickel plate. CENTRE & Copper alloy with gold plate over ALL. nickel plate. RATING.4 VA max. @ V AC or DC max or Amps @ V AC or 8 V DC. (This contact can be used where either dry circuit or power conditions exist. However when dry circuit rating is exceeded the gold plating is removed from the contact and the switch cannot be used in dry circuits.) SPST SPDT.76.5 THK. PLUNGER 7 - Black Color Plunger w/o Cap 7 - Red Color Plunger w/o Cap 7 - Plunger with Black Color Cap 7 - Plunger with Red Color Cap 74 - Plunger with Green Color Cap 77 - Black Colour Plunger (.8 Long) * with rubber boot ** Colour Plunger (.8 Long) * 78 - Black * Refer page -D7 MOUNTING Bush threaded M5 x.5, 5.5 long Bush threaded M6 x.75, 6. long (without collar) 5 Bush unthreaded Æ 5.x.5, 5.5 long 6 Panel Sealing M6 x.75 SWITCH FUTION TERMINATION DPDT.5 4.6 Solder Type Contacts.79 Straight PC Contacts EPOXY.76 4 Bent PC Contacts for SEAL.5 vertical operation (PCRV) SPDT 5 Bent PC Contacts for horizontal operation. (PCR) EPOXY SEAL ** RUBBER BOOT (BLACK) Dust proof with Rubber Boot 7 Bush threaded M6 x.75,. long (without collar) 5.8 4.5 Æ 6. Æ 5. / ISSUE, DCR 8 PANEL MOUNTING HOLES ORDERING CODE ** 5 8 Rubber Boot can be given only with plunger length.8mm long and bush length.mm long D-88/, st Block, st Stage, Peenya Industrial Estate, Bangalore - 56 58, India Telefax (8) 89 77 / 89 78 / 89 79 / 89 7 An ISO 98 Company Website www.integralsys.in E-mail inty.systems@gmail.com / sales@integralsys.in D4
Integral Series 6 Push Button Switches are designed to incorporate all the advantages of the time tested Toggle switches. The actuation is Push to On / Push to Off and the cap size and colour can be selected to match the front panel requirements. The switches are also available for direct P.C.B. Mounting and provide an elegant and robust way to switch-on equipments. D5
/ ISSUE, DCR 8 D-88/, st Block, st Stage, Peenya Industrial Estate, Bangalore - 56 58, India Telefax (8) 89 77 / 89 78 / 89 79 / 89 7 An ISO 98 Company Website www.integralsys.in E-mail inty.systems@gmail.com / sales@integralsys.in D6
integral PUSH BUTTON (ILLUMINATED) Series 64 DESCRIPTION Integral Series 64 Illuminated Push Button Switches are of modular construction giving a freedom to the customer to build his own switch given all the sub- assemblies. A robust construction using stainless steel sheets, the switch is built to take rough usage over a long period of time. The design enables the user to change the multi-chip LED s from the front of the panel without removing the switch from the panel. Consisting of the Push Button, Body and the Switch modules the switch assembly lends itself to a large number of combinations. DIMENSIONAL DETAILS thickness All Dimensions in mm. D7
O D8
D9
SPECIFICATION Enveronmental Electrical & Machanical A) Mechanical (I) Momentery Max operation/min (Ii) Alternating Max 6 operation/min. Temperature a) Storage b) Operating B) Electrical - Max operation/min.. Damp Heat. Current Rating Resistive Load 5 A @ 5V AC OR V DC Inductive Load A @ 5V AC OR V DC. Vibration. Insulation resistance Max M ohms @ 5 V DC - 55 Hz, mm peak ( hr.on each axis) 4. Impact Shock 4. Dielectric strength Between non-continuous terminals 6 V AC for min. Between different poles V AC for min. Peak acceleration 75 m/s for 5 m sec duration In all 6 direction. 5. Salt mist As per JSS 5 For 48 hrs.. Allowable Operating Frequency Between each terminals and ground V AC for min. 5. Mechanical life Min, operations 6. Electrical life O Min, operations at A @ 5V AC / 8V DC @ +4 C 7. Initial Contact resistance Max 6 m ohms 8. Terminal strength Soldered terminal N for min 9. Stroke Approx mm O O -5 C to + 65 C O O - C to + 4 C C 6 hrs @ O RH 85% at 4 C MATERIAL & FINISH METALS- Stainless Steel, BerrylliumCopper and Brass as required. PLASTICS- Thermoset and Termoplastic are UL-94 V grade. PLATING- Heavy Silver OR Gold on Nickel as required. ORDERING DETAIL FOR PRE ASSEMBLED COMPLETE SWITCH. COMPONENTS SWITCH MODULE PART No. 64 SW BODY 64 BD BARRIER LED 64 BR COLOUR PLATE 64 CP 64 BT 64 LD BUTTON A Special customer specific number will be allotted keeping the above Configuration. / ISSUE, DCR 8 ing Detail Example Switch Module Body Barrier LED Colour Plate Button 64 64 64 64 64 64 SW BD BR LD CP BT S K R S M A 4 R A 4 means Switch Momentery Type. means Body for full display 4V Switch means Black Short Barrier means Red Colour LED means Red Colour full display lens. means Button for full display 4 V Switch All Dimensions in mm. D-88/, st Block, st Stage, Peenya Industrial Estate, Bangalore - 56 58, India Telefax (8) 89 77 / 89 78 / 89 79 / 89 7 D An ISO 98 Company Website www.integralsys.in E-mail inty.systems@gmail.com / sales@integralsys.in
MICRO SWITCHES integral SNAP ACTION Series 66 DESCRIPTION Integral Series 66 Micro Switches are characterized by their high functional reliability and switching accuracy. Can be used for Office Equipment, Industrial Machinery, Household Equipment. DIMENSIONS All Dimensions in mm. SPECIFICATIOONTACT RATING MATERIALS & FINISHES 5A (Resistive Load) @ 5v AC/V DC CONTACT RESISTAE m ohms (max) at -6V DC,. A Initial DAP (Glass filled) UL approved Silver Rivets Copper Alloy Silver plated M ohms (min) @ 5V DC INSULATION RESISTAE BASE SPRING DIELECTRIC STRENGTH Beryllium Copper V AC (min) LIFE (ELECTRICAL) 5, Cycles @ full electrical load LIFE (MACHANICAL), Cycles OPERATING TEMPERATURE RANGE -5O to +85O C ORDERING CODE 6 6 / ISSUE, DCR 8 - Ag - Alloy - Ag - Au plated FUTION TERMINATION - NO - - NO/ - Plug in type - Solder type - PC type ACTUATOR - Mushroom Plunger - Pin Plunger - Hinge Lever - Roller Lever 4 - Simulated Roller Lever 5 - Pin plunger (tall) For Future Development D-88/, st Block, st Stage, Peenya Industrial Estate, Bangalore - 56 58, India Telefax (8) 89 77 / 89 78 / 89 79 / 89 7 An ISO 98 Company Website www.integralsys.in E-mail inty.systems@gmail.com / sales@integralsys.in D
TACTILE SWITCHES Series - 68 DESCRIPTION Integral Series 68 Tactile switch is characterized by its high functional reliability and switching accuracy. Mounted on a PC Board the total height of the switch can be altered as per customer specification (L). The tactile feel is provided by a Stainless Steel Spring where as the actual Contact is established between Silver Plated Copper alloy parts. DIMENSIONAL DETAILS ROUND TYPE 9. SQUARE TYPE (L).4 7.4 4.45.5.8 4 OFF D C B A. D. SCHEMATIC C A D A B B C PCB DRILLING DETAIL Terminal Reference only All Dimensions in mm. MATERIALS & FINISHES SPECIFICATIONS SWITCHING CURRENT CONTACT RESISTAE INSULATION DIELECTRIC STRENGTH OPERATING FORCE LIFE (MECHANICAL) OPERATING TEMPERATURE BODY CAP SPRING ma @ V DC m ohms max. Initial M ohms min. 5V AC/ min + 5 gms., Cycles -5OC to +6OC PBT GF() UL94V ABS Copper alloy Silver pltd. Copper alloy Silver pltd. Stainless Steel ORDERING INFORMATION ORDERING CODE 6 8 8 / ISSUE, DCR 8 CONTACT MATERIAL * - Cu - (Ag.Plt.) - Ag - (Ag.Plt.) - Cu - (Ag.Plt.) - Ag - (Au.Plt.) CAP (L=Length) - Short -.75 - Long - 4.45 CAP COLOUR - RED - BLACK - GREEN 4 - YELLOW 5 - WHITE CAP SHAPE - ROUND - SQUARE * Standard D-88/, st Block, st Stage, Peenya Industrial Estate, Bangalore - 56 58, India Telefax (8) 89 77 / 89 78 / 89 79 / 89 7 An ISO 98 Company Website www.integralsys.in E-mail inty.systems@gmail.com / sales@integralsys.in D