Compact high capacity, (2A max) Slim heat sink combined type added UL (9-1) reinforced insulation compliant AQ-J AQ-J RELAYS New Slim heat sink combined type Compliance with RoHS Directive FEATURES 1. Compact Size Approx 4% reduction in required space achieved in the footprint area compared with the previous model (AQ-R relay) 2. Built-in varistor 3. Reverse input connection prevention function 4. Labor Saving (tab terminal). Heat sink combined types ready to mount on DIN rail added (Radiating grease and screws assembly process not needed). Output arrangement 1a and 1a 2 available in the heat sink combined type Note: * International standards are acquired for AQ-J SSR stand-alone, not applied to heat sink combined type. TYPICAL APPLICATIONS 1. Kitchen appliances 2. Vending machine 3. Injection molding machine 4. Packing machine. Amusement machine ORDERING INFORMATION AQ-J Solid State Relays Output type 1: 1A, 7V to 24V AC 2: A, 7V to 24V AC 4: 2A, 7V to 24V AC AQJ Terminal 1: Plug-in terminal, Zero-cross 2: Plug-in terminal, Random* Input voltage 2: 4 to V DC : 18 to 28 V DC 9: 1 to 18 V DC Functions V: Built-in varistor Slim heat sink combined type None: Y: W: Without a heat sink 1a type 1a 2 type Note: * Random type is available by custom order. TYPES 1. AQ-J Solid State Relays Type Load current Load voltage Input voltage 4 to V DC AQJ112V 1A 1 to 18V DC AQJ119V 18 to 28V DC AQJ11V 4 to V DC AQJ212V Zero-cross* A 7V to 24V AC 1 to 18V DC AQJ219V 18 to 28V DC AQJ21V 4 to V DC AQJ412V 2A 1 to 18V DC AQJ419V 18 to 28V DC AQJ41V Standard Packing; carton: 1 pcs., case: 2 pcs. Note: * Random type also available. Please inquire.
AQ-J 2. AQ-J SSR Slim Heat Sink Combined Type Output configuration Type Load current Load voltage Input voltage 4 to V DC AQJ112VY 1A 1 to 18V DC AQJ119VY 1a 18 to 28V DC AQJ11VY 4 to V DC AQJ412VY 2A 1 to 18V DC AQJ419VY 18 to 28V DC AQJ41VY Zero-cross* 7V to 24V AC 4 to V DC AQJ112VW 1A 1 to 18V DC AQJ119VW (per 1a) 18 to 28V DC AQJ11VW 1a 2 Standard Packing; no carton, case: 1 pcs. Note: * Random type also available. Please inquire. 2) Output side Notes: *1 Refer to REFERENCE DATA 1. Load current vs. ambient temperature. *2 When the load current is less than the rated minimum load current, please refer to Cautions for Use of SSR. 2. Ratings (Test sample: AQ-J slim heat sink combined type, Measurement condition: at 2 C 8 F, input ripple: 1 % or less) 1) Input side 2) Output side A (per 1a) Notes: *1 Refer to REFERENCE DATA 1. Load current vs. ambient temperature. *2 When the load current is less than the rated minimum load current, please refer to Cautions for Use of SSR. 4 to V DC AQJ412VW 1 to 18V DC AQJ419VW 18 to 28V DC AQJ41VW 3. Accessories Type Packaged quantity Slim heat sink (28mm wide) (Mountable on a DIN rail) AQP-HS-SJ1A No carton, 1 in a case Slim heat sink (4mm wide) (Mountable on a DIN rail) AQP-HS-SJ2A No carton, 8 in a case Standard heat sink (1A and A) AQP-HS-J1A in a carton, 2 in a case Standard heat sink (2A only) AQP-HS-J2A No carton, in a case DIN rail mounting plate AQP-DPJ in a carton, in a case SPECIFICATIONS 1. Ratings (Test sample: AQ-J stand-alone, Measurement condition: at 2 C 8 F, input ripple: 1% or less) 1) Input side AQJ112V AQJ119V AQJ11V AQJ212V AQJ219V AQJ21V Item AQJ412V AQJ419V AQJ41V Rated voltage V DC 12V DC 24V DC Input voltage 4 to V DC 1 to 18V DC 18 to 28V DC Input impedance Approx..2kΩ Approx..8kΩ Approx. 1.kΩ Drop-out voltage Min. 1V DC Item AQJ112V AQJ119V AQJ11V AQJ212V AQJ219V AQJ21V AQJ412V AQJ419V AQJ41V Max. load current* 1 1A A 2A Load voltage 7 to 24V AC Frequency 4Hz to Hz Non-repetitive surge current 1A A 2A Max. OFF-state leakage current Max. ma Max. ON-state voltage drop Max. 1.V Min. load current* 2 ma Item AQJ112V(Y W) AQJ412V(Y W) AQJ119V(Y W) AQJ419V(Y W) AQJ11V(Y W) AQJ41V(Y W) Rated voltage V DC 12V DC 24V DC Input voltage 4 to V DC 1 to 18V DC 18 to 28V DC Input impedance Approx..2kΩ Approx..8kΩ Approx. 1.kΩ Drop-out voltage Min. 1V DC Item AQJ112VY AQJ119VY AQJ11VY AQJ412VY AQJ419VY AQJ41VY AQJ112VW AQJ119VW AQJ11VW AQJ412VW AQJ419VW AQJ41VW Output arrangement 1a 1a 2 Max. load current* 1 1A 2A 1A A Load voltage 7 to 24V AC Frequency 4Hz to Hz Non-repetitive surge current 1A 2A 1A 2A Max. OFF-state leakage current Max. ma Max. ON-state voltage drop Max. 1.V Min. load current* 2 ma
3. Characteristics (Measurement condition: at 2 C 8 F, input ripple: 1% or less) Item Characteristics Remarks Operate time, max. 1/2 cycle of voltage sine wave + 1ms Release time, max. 1/2 cycle of voltage sine wave + 1ms Insulation resistance, min. 1MΩ between input, output and case at V DC Breakdown voltage 3, Vrms between input and output 2, Vrms between input, output and case for 1min. Vibration resistance SSR stand-alone: 1 to Hz, double amplitude of 1.mm Slim heat sink combined type: 1 to Hz, double amplitude of.7mm X, Y, Z axes Shock resistance SSR stand-alone: Min. 98m/s 2 Slim heat sink combined type: Min. 197m/s 2 X, Y, Z axes Ambient temperature 3 to +8 C 22 to +17 F Non-condensing at low temperatures Storage temperature 3 to +1 C 22 to +212 F Operational method Zero-cross (Turn ON and Turn OFF) REFERENCE DATA (1) AQ-J Solid State Relays 1. Load current vs. ambient temperature Use load current within range specified in the figure below Tested condition: (1) 1 A type (when using heat sink or iron (2)-1. A type (when using ) 1) If attached to a heat sink, use a heat plate) conductive compound (Ex. Toshiba sillicone 12 18 YG111 or TSK33) of similar coating to on an (A) slim heat sink improve cooling on an (B) slim heat sink When using 2 2 t2 mm 1 2) Without external heat sink When two units are mounted on an (A) slim heat sink If the mounting surface is not metallic and a 8 12 heat sink is not used, expose the bottom on an (C) standard heat sink When two units are mounted When using surface and plate surface to improve heat on an (B) slim heat sink 9 1 1 t1. mm When using 1 1 t1. mm dissipation. 3) The current value is per 1a. 4 (A) slim heat sink (B) slim heat sink (C) standard heat sink (D) DIN rail mounting plate (E) standard heat sink AQP-HS-SJ2A AQP-HS-SJ1A AQP-HS-J1A AQP-DPJ AQP-HS-J2A 2 When using as stand-alone When using an (D) DIN rail mounting plate 2 4 8 1 3 When using t1. mm -2 2 4 8 AQ-J (2)-2. A type (when using a heat sink) (3)-1. 2 A type (when using ) (3)-2. 2 A type (when using a heat sink) 2 1 on an (C) standard heat sink on an (B) slim heat sink When two units are mounted on an (A) slim heat sink When two units are mounted on an (B) slim heat sink When using as stand-alone When using an (D) DIN rail mounting plate When a single unit is mounted on an (A) slim heat sink 2 4 8 1 3 When using 3 3 t2 mm 2 When using 2 2 t2 mm When using 2 2 2 t2 mm 1 When using t1. mm When using 1 1 t1. mm -2 2 4 8 3 2 2 1 When a single unit is mounted on an (E) standard heat sink When a single unit is mounted on an (B) slim heat sink When two units are mounted on an (A) slim heat sink on an (C) standard heat sink When a single unit is mounted on an (A) slim heat sink When two units are mounted on an (B) slim heat sink When using as stand-alone When using an (D) DIN rail mounting plate 2 4 8 1 2. Non-repetitive surge current vs. carrying time 3. Input current vs. input voltage characteristics (1A, A and 2A common) 3 3 Non-repetitive surge current, A 2 1 2A type A type 1A type Input current, ma 2 2 1 (4 to V DC) (1 to 18V DC) (18 to 28V DC) 1 1 1 No. of cycles at Hz 1 2 2 3 3 Input voltage, V
AQ-J (2) AQ-J SSR Slim Heat Sink Combined Type 1. Load current vs. ambient temperature Use load current within range specified in the figure below (1) Output arrangement: 1a (2) Output arrangement: 1a 2 (Per 1a) 2 2 2 1 AQJ41 VY AQJ11 VY 1 AQJ41 VW AQJ11 VW 2 4 8 1 2 4 8 1 Note: When two contacts are operated simultaneously. In the case of a single-contact operation, the rating of (1) AQJ11 VY, AQJ41 VY applies. 2. Surge current vs. carrying time 3. Input current vs. input voltage characteristics Surge current, A 4 3 2 Input current, ma 3 24 18 12 AQJ 12V AQJ 19V AQJ 1V AQJ41 V 1 AQJ11 V 1 1 1 No. of cycles at Hz 1 2 2 3 Input voltage, V DIMENSIONS (mm inch) 1. AQ-J Stand Alone The CAD data of the products with a mark can be downloaded from: http://panasonic-electric-works.net/ac 4.3.19 3 max. 7.9 max..313 4..179 Schematic Input power 3 1 + 4 2 Load Load power source 38 1.49 4.3 dia..19 dia. 28 1.12 8.4.3.331.2 2-1. dia. 2-. dia. 3 2-1.2 dia. 2-.47 dia.. 2.8.217.11 1..3 7.1.28 Mounting dimensions 3 +.2.1 +.8.4 2-4.3 dia. or M4 2-.19 dia. or M4 Output side 1 and 2 terminals: #2 type, t =.8.31 Input side 3 and 4 terminals: #11 type, t =..2 17.9.197
2.-(1) Slim Heat Sink Combined Type Output Arrangement: 1a 4. dia. 1 3.937 9 3.43 78 3.71 4.. elliptical hole.181.22.23 28 1.12 Schematic Input power source 3 1 + 4 2 Load AQ-J Load power source Mounting dimensions (Top view) Note: When using on a DIN rail, please install so that the A part is on top. 1..3 AQP81 A part 777 Max. 83 113 3.28 4.449 1 3.937 2-4. dia. or M4 2- or M4 9±.2 3.43±.8.23 2.-(2) Slim Heat Sink Combined Type Output Arrangement: 1a 2 4. dia. 1 3.937 9 3.43 78 3.71 4.. elliptical hole.181.22.23 28 1.12 Schematic Input power source 3 1 + 4 2 Load Note: Use caution for AQ-J terminal numbers. Load power source Mounting dimensions (Top view) Note: When using on a DIN rail, please install so that the A part is on top. 1..3 AQP81 777 A part Max. 83 113 3.28 4.449 1 3.937 2-4. dia. or M4 2- or M4 9±.2 3.43±.8.23 ACCESSORIES AQP-HS-SJ1A Slim Heat Sink Mounting dimensions (Top view) 4. dia. 1 3.937 9 3.43 78 3.71 3 3 1 3.394 -M4 (Effective screw depth: mm.23inch).23 4.. elliptical hole.181.22 28 1.12 2-4. dia. or M4 2- or M4 9±.2 3.43±.8.23 Note: When using on a DIN rail, please install so that the A part is on top. 1..3 AQP81 A part 777 78 3.71 83 3.28 AQP-HS-SJ2A Slim Heat Sink Mounting dimensions (Top view) 1 3.937 9 3.43 78 3.71 4 1.7 -M4 (Effective screw depth: mm.23inch) 2-4. dia. or M4 2- or M4.23 4. dia. 47. 1.874 3 3.23 4.. elliptical hole.181.22 4 1.772 9±.2 3.43±.8 Note: When using on a DIN rail, please install so that the A part is on top. 1..3 AQP812 777 A part 78 3.71 83 3.28
AQ-J AQP-HS-J1A Standard Heat Sink (for 1A and A types) 4.4.173 1.99 4.4.173 R2.2 R.87 2.79 Mounting dimensions 4-M4 or 4.4 dia. 4-M4 or.173 dia. 3-M4 1..9 9 3.43 4 2.12 33.3 1.311 8 3. 1+. 1. +.2 3.937.9 9±.1 3.43±.4 11.1.437 3 47. 1.874 1 3.937 2.79 9.34 24..9 28. 1.122 4 1.772 1..9 ±.2 1.99±.8 AQP-HS-J2A Standard Heat Sink (for 2A type) 4-R2..98 Mounting dimensions 4-M4. or dia. 4-M4. or.197 dia. 3-M4.197 3 119 4.8 47. 1.87.9 119±.1 4.8±.4 132.197 132±.1.197±.4 7.27 2.79 2 2.47 4 1.811 4 2.2 82 3.228 1 3.937 12 4.724 142.91 3.118 13.12 AQP-DPJ DIN Rail Mounting Plate 1..3 4. dia. 3-M4 47. 1.874 9 3 3.43 19.748 1 3.937 12.1.47 1.. 4.. elliptical hole.181.22.23.91
AQ-J Mounting rail Fastening plate 1, 39.37 12.472 M4 1.99..217.197 3 1.378 24 1 2.7R 1.94 1..91.394.91.18R.91.394.91.197.9 27 1.3 1.394 AT8-DLA1 4-. slot 4-.217.91 slot 7..29 ATA48 ATA48 UP 1.394 NOTES 1. Part number indication The AQ-J slim heat sink combined type is a product combining the AQ-J SSR and AQ-J SSR heat sinks. The part numbers are indicated on each AQ-J SSR and heat sink. Ex) In the case of AQJ112VY Part number of AQ-J SSR: AQJ112V Part number of the heat sink: AQP81* When using these parts, please refer to REFERENCE DATA, 1. Load current vs. ambient temperature. Note: * The Japanese part number is printed on the following accessories in stead of Global part number. Please refer to the below chart for interpretation from Japanese to Global part number. Products Japanese Global Slim heat sink (28 mm) AQP81 AQP-HS-SJ1A Slim heat sink (4 mm) AQP812 AQP-HS-SJ2A Standard heat sink (1A and A) AQP811 AQP-HS-J1A Standard heat sink (2A and 4A) AQP88 AQP-HS-J2A Standard heat sink (AQ-N 2A) AQP84 AQP-HS-3/4A DIN Rail Mounting Plate (for AQ-J) AQP89 AQP-DPJ DIN Rail Mounting Plate (for AQ-N) AQP83 AQP-DP Mounting Rail ATA4811 AT8-DLA1 Terminal Cover (for AQ-N) AQP87 AQP-NPC Recommended Temperature Controllers <KT4H Temperature Controller> Our temperature controller is recommended for use with our Solid State Relays. 48mm 1.89inch Features Data can be collected using the RS48 communications interface via a PLC. Improved visibility using a negative type LCD and backlight. Depth-wise length (chassis dimension) is mm 2.2 inch. 48mm 1.89inch mm 2.2inch Substitute part numbers Power supply Control output 1 to 24 V AC Relay contact AKT4H1111 *For detailed product information about temperature controllers, please refer to our website: http://panasonic-denko.co.jp/ac/e/fasys/component/temperature_controller/ For Cautions for Use.
Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: AQP812 AQP-HS-J1A AQP-HS-SJ2A