Wodaplug EOC Slave s Wi-Fi routerem - EOC1121R4W Základní popis CD5204WL is the EOC slave based on HomePlug AV solution for Ethernet access over coax. It works together with EOC master which is on HomePlug AV solution basis as well to construct a two-layer Ethernet data transmission channel on CATV coaxial cable, providing the Ethernet access service over the existing coaxial cable networking. CD5204WL is adopted with the Qualcomm INT7411 chipset solution and OFDM modulation technology of high interference resistance, taking up low frequency between 7.5MHz and 65MHz to transfer data. Its physical layer speed is 600Mbps, while the maximum MAC layer throughout is 300Mbps. It is built-in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable without interference. CD5204WL is a slave with 4 Ethernet ports and Wi-Fi.
Vlastnosti 1) Based on Qualcomm INT7411 chipset solution of HomePlug AV technology 2) Work at low frequency between 7.5MHz~65MHz without influence on CATV service 3) Physical layer speed is 600Mbps and Max MAC layer throughout is 300Mbps 4) Support data encryption for both uplink and downlink 5) Support 4*10/100Mbps Ethernet ports auto-negotiation function 6) Support slave(cpe) isolation 7) Support VLAN configuration based on slave s Ethernet ports and 802.1q 8) Support bandwidth(speed) limitation for both uplink and downlink 9) Support QoS configuration based on slave port or VLAN 10) Support broadcast storm control 11) Support data packages count 12) Automatically distribute configurations to newly connected slaves, available to use as soon as correctly connected and power on 13) Support WEB,CLI and SNMP management 14) Support on-line upgrading EOC Specification Item Parameters Specifications One TV(RF signal) output, metric or British RF Interface F-connector One CABLE(MIX) input, metric or British F-connector Interface & Indicator Ethernet Interface Power Supply Interface LED Indicators Four 10/100M adaptable Ethernet interface, RJ45 One 12V DC power supply interface One power supply LED indicator One system LED indicator One CABLE LED indicator for connection status One WIFI LED indicator Each Ethernet port has one LAN LED indicator
Item Parameters Specifications Performance Parameters Standards Followed Software Physical Features RF Parameters Speed Modulation Mode Working Mode Encryption Mode EOC Standard Ethernet Protocol Management Mode Software Features Power Supply & Power Consumption Dimension & Weight Environment Situation Frequency: 7.5MHz~65MHz Output Level: 110+5dBuv Receiving Sensibility: 45dBuv Return Loss: >15dB Output Impedance: 75Ω Physical Layer Speed: 600Mbps Max MAC layer throughout: 300Mbps OFDM-2690-carriers 4096/1024/256/64/16/8-QAM, QPSK, BPSK, ROBO TDMA/CSMA AES-128 IEEE P1901(Draft) HomePlug AV IEEE802.3, IEEE802.3x, IEEE802.3u, IEEE802.1P, IEEE802.1Q Support WEB, CLI and SNMP network management VLAN, QOS, Bandwidth Control and Broadcast Storm Limitation, etc Power Supply Adapter: 12VDC 0.5A Power Consumption: <5W Dimension: 160x120x28.5mm Net Weight: 0.5kg Working Temperature: 0~50 Storage Temperature: -40~85 Working Humidity: 10%~90% Non Condensation Storage Humidity: 5%~95% Non Condensation
WIFI Specification Item Parameters Specifications Operating Mode Router or Bridge IEEE802.11b: 11Mbps Throughput IEEE802.11g: 54Mbps IEEE802.11n: 135Mbps Performance Parameters Frequency Channel Modulation Mode Coding RF Receiving Sensitivity RF Output Level Encryption Mode 2.412 GHz~2.472 GHz 13*Channel, configurable to meet the standard of USA, Canada, Japan and China DSSS, CCK and OFDM BPSK, QPSK, 16QAM and 64QAM 802.11b: -82dBm @ 1 Mbps; -80dBm @ 2 Mbps; -78dBm @ 5.5 Mbps; -76dBm @ 11 Mbps 802.11g: -82dBm @ 6 Mbps; -81dBm @ 9 Mbps; -79dBm @ 12 Mbps; -77dBm @ 18 Mbps; -74dBm @ 24 Mbps; -70dBm @ 36 Mbps; -66dBm @ 48 Mbps; -65dBm @ 54 Mbps 802.11n: -65dBm @ 65 MbpsHT40; -61dBm @ 135 MbpsHT40 802.11b: 16.5±1dBm 802.11g: 13±1dBm @ 54 Mbps; 14±1dBm @ 48 Mbps; 15±1dBm @ 6 ~ 36 Mbps 802.11n: 13±1dBm @ 54 Mbps; 14±1dBm @ 48 Mbps; 15±1dBm @ 6 ~ 36 Mbps 802.11i Security: WEP-64/128, TKIP(WPA-PSK) and AES(WPA2-PSK) Typical Application Network Access VOD(video on demand service) IPTV / Video Surveillance
Network Construction default IP for management: http://192.168.10.1 For the software, there is no difference between the old and new slave. Upon different usage, the new version has two login information. The end-user user name and password both are "admin", while for super admin, the user name is "administrator", and the password is "cd16857lkv19". The full access and complete setting in Web could be realized via the super admin. The new version Wi-Fi slave is more flexible in the application than before. On the hardware revision, we add the 8306E switch chipset in the modem. It can controls the STB1 and STB2 ports which used as the Ethernet ports to setting the VLAN, rate-limiting, configuration, etc. The LAN1 and LAN2 have the router feature which supports the PPPoE. Moreover, the two modes can work at the same time.