Broadband system applications i.e. WCDMA, CATV, etc. General purpose Voltage Controlled Attenuators for high linearity applications

Similar documents
SiGe:C Low Noise High Linearity Amplifier

CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling.

PNP 500 ma, 50 V resistor-equipped transistor; R1 = 2.2 kω, R2 = open

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

DATA SHEET. BGA2031/1 MMIC variable gain amplifier DISCRETE SEMICONDUCTORS. Product specification Supersedes data of 2000 Mar 02.

NCR402T. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

74ABT General description. 2. Features and benefits. 3. Ordering information. Quad 2-input AND gate

General-purpose Zener diodes in a SOD323F (SC-90) very small and flat lead Surface-Mounted Device (SMD) plastic package.

1 GHz wideband low-noise amplifier with bypass. The LNA is housed in a 6-pin SOT363 plastic SMD package.

Bidirectional ESD protection diode

300 V, 100 ma PNP high-voltage transistor

MMBZ16VAL. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

NWP2081T. 1. General description. 2. Features and benefits. 3. Applications. 4. Ordering information. Half-bridge driver IC

IMPORTANT NOTICE. use

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESD24VF1BSF. Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit C d diode capacitance f = 1 MHz; V R = 0 V

PESD18VV1BBSF. Very symmetrical bidirectional ESD protection diode

PESD18VF1BL. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data. 5. Pinning information

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESD5V0X2UM. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

General-purpose Zener diodes in an SOD523 (SC-79) ultra small and flat lead Surface-Mounted Device (SMD) plastic package.

PESD5V0C1USF. in portable electronics, communication, consumer and computing devices.

GreenChip synchronous rectifier controller. The TEA1792TS is fabricated in a Silicon-On-Insulator (SOI) process.

45 V, 100 ma NPN general-purpose transistors

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PTVSxS1UR series. 1. Product profile. 400 W Transient Voltage Suppressor. 1.1 General description. 1.2 Features and benefits. 1.

Low forward voltage Ultra small SMD plastic package Low capacitance Flat leads: excellent coplanarity and improved thermal behavior

PESD12VV1BL. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Unidirectional ESD protection diode

ESD protection for ultra high-speed interfaces

Ultra low capacitance ESD protection for Ethernet ports. ESD protection high-frequency AC-coupled Ethernet ports

PTVSxP1UP series. 600 W Transient Voltage Suppressor

PESD3V6Z1BCSF. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

Dual back-to-back Zener diode

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PMEG2010EH; PMEG2010EJ; PMEG2010ET

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

IP4285CZ9-TBB. ESD protection for high-speed interfaces

PESD1IVN-U. 1. General description. 2. Features and benefits. 3. Applications. Quick reference data

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Total power dissipation: 500 mw Small plastic package suitable for surface-mounted design Wide working voltage range Low differential resistance

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Femtofarad bidirectional ESD protection diode

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Ultra low capacitance bidirectional ESD protection diode

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PMEG1030EH; PMEG1030EJ

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PMEG3015EH; PMEG3015EJ

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

IP4234CZ6. 1 Product profile. Single USB 2.0 ESD protection to IEC level General description. 1.2 Features. 1.

PESD5V0V1BA; PESD5V0V1BB; PESD5V0V1BL

550 MHz, 34 db gain push-pull amplifier

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESD4V0Z1BSF. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

PESDxUSB3S series. ESD protection for differential data lines

PESD5V0L1BSF. Ultra low profile bidirectional low capacitance ESD protection diode

2PB709ARL; 2PB709ASL

MF1 MOA4 S50. Contactless Chip Card Module Specification. This document gives specifications for the product MF1 MOA4 S50.

PUSB3AB4. 1. Product profile. ESD protection for ultra high-speed interfaces. 1.1 General description. 1.2 Features and benefits. 1.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESD5V0U2BT. 1. Product profile. Ultra low capacitance bidirectional double ESD protection diode. 1.1 General description. 1.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESD3V3L1UA; PESD3V3L1UB; PESD3V3L1UL

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PESD5V0U1BA; PESD5V0U1BB; PESD5V0U1BL

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

UM NVT2008PW and NVT2010PW demo boards. Document information

PESD3V3Y1BSF. Extremely low capacitance bidirectional ESD protection diode

UM NVT2001GM and NVT2002DP demo boards. Document information

PRTR5V0U2X Ultra low capacitance double rail-to-rail ESD protection diode Rev January 2008 Product data sheet

BD027-14E Low-Voltage Nanopower Digital Switch for Medical Devices

PESD2V0Y1BSF. Extremely low capacitance bidirectional ESD protection diode

Two-Wire Sensor Interfaces

AN BGA GHz 18 db gain wideband amplifier MMIC. Document information. Keywords. BGA3018, Evaluation board, CATV, Drop amplifier.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

AN BGA301x Wideband Variable Gain Amplifier Application. Document information. Keywords

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

MF1ICS General description. Functional specification. 1.1 Key applications. 1.2 Anticollision. Product data sheet PUBLIC

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PCMFxUSB3S series. Common-mode EMI filter for differential channels with integrated ESD protection

1.8 V, wide bandwidth, 4 differential channel, 2 : 1 multiplexer/demultiplexer switch with single enable

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Transcription:

Rev. 2 6 March 2012 Product data sheet 1. Product profile 1.1 General description Quad PIN diode in a SOT753 package. 1.2 Features and benefits 4 PIN diodes in a SOT753 package 300 khz to 4 GHz High linearity Low insertion loss reduction in part count Low diode capacitance Low diode forward resistance 1.3 Applications 2. Pinning information Broadband system applications i.e. WCDMA, CATV, etc. General purpose Voltage Controlled Attenuators for high linearity applications Table 1. Discrete pinning Pin Description Simplified outline Graphic symbol 1 RF in 2 series bias 3 RF out 4 shunt 1 bias 5 shunt 2 bias 5 4 1 2 3 5 4 1 2 3 sym142 3. Ordering information Table 2. Ordering information Type number Package Name Description Version SC-74A plastic surface-mounted package; 5 leads SOT753

4. Marking Table 3. Marking Type number Marking code A2 5. Limiting values 6. Thermal characteristics Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit V R reverse voltage [1] - 50 V I F forward current [1] - 0 ma P tot total power dissipation T sp =90 C [1] - 125 mw T stg storage temperature 65 +150 C T j junction temperature 65 +150 C [1] single diode. 7. Characteristics Table 5. Thermal characteristics Symbol Parameter Conditions Typ Unit R th(j-sp) thermal resistance from junction to solder point 350 K/W Table 6. Characteristics T j = 25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit Per diode V F forward voltage I F = 50 ma - 0.95 1.1 V I R reverse current V R =50V - - 0 na C d diode capacitance see Figure 1; f = 1 MHz; V R = 0 V - 600 - ff V R = 1 V - 430 - ff V R = 20 V - 250 300 ff r D diode forward resistance see Figure 2; f = 0 MHz; I F =0.5mA - 77 0 I F =1mA - 40 50 I F =ma - 5.4 7 I F =0mA - 1.4 1.9 L charge carrier life time when switched from I F =matoi R =6mA; R L =0 ; measured at I R =3mA - 1.25 - s All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 2 6 March 2012 2 of 13

600 001aam719 3 001aam720 C d (ff) r D (Ω) 500 400 300 200 0 5 15 20 V R (V) 1 1 1 I F (ma) f=1mhz; T j =25 C. f = 0 MHz; T j =25 C. Fig 1. Diode capacitance as a function of reverse voltage; typical values. Fig 2. Diode forward resistance as a function of forward current; typical values. All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 2 6 March 2012 3 of 13

8. Application information 8.1 Application circuit R3 C1 V ctrl RF in/out C2 3 2 1 C3 RF in/out R1 4 5 R4 R5 R2 C4 R6 C5 V CC 001aam673 Fig 3. Wideband Quad PIN diode attentuator circuit Table 7. List of components used for the typical application Component Description Conditions Value C1, C2, C3, C4, C5 chip capacitor V CC = 3.7 V 47 nf V CC = 5 V 47 nf R1, R2 chip resistor V CC = 3.7 V 560 V CC = 5 V 9 R3 chip resistor V CC = 3.7 V 330 V CC = 5 V 00 R4, R5 chip resistor V CC = 3.7 V 1500 V CC = 5 V 2000 R6 chip resistor V CC = 3.7 V 680 V CC = 5 V 00 All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 2 6 March 2012 4 of 13

8.2 Quad PIN pi attentuator characteristics Table 8. Typical performance for quad PIN diode attenuator V CC = 3.7 V; T amb = 25 C unless otherwise specified. Symbol Parameter Test Conditions Typ Units L ins insertion loss V C =V; f=1ghz 3 db RL in input return loss V C = 0 V; f = 1 GHz 24 db attenuation V C = 0 V; f = 1 GHz 44 db IP3 i input third-order intercept point f = 0.1 GHz V ctrl =2V 38 dbm V ctrl = V 45 dbm f=0.9ghz V ctrl =2V 45 dbm V ctrl = V 45 dbm f=1.8ghz V ctrl =2V 45 dbm V ctrl = V 45 dbm f=2.1ghz V ctrl =2V 44 dbm V ctrl = V 44 dbm All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 2 6 March 2012 5 of 13

L ins 0 20 40 (8) (7) (6) (5) 001aam674 () (9) 60 80 3 4 f (MHz) V CC = 3.7 V; T amb =25 C. V ctrl = 0 V V ctrl = 1 V V ctrl = 1.1 V V ctrl = 1.2 V (5) V ctrl = 1.3 V (6) V ctrl = 1.5 V (7) V ctrl = 2 V (8) V ctrl = 4 V (9) V ctrl = 7.5 V () V ctrl = V Fig 4. Insertion loss as function of frequency; typical values All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 2 6 March 2012 6 of 13

RL in 0 001aam675 80 α 001aam676 60 20 40 30 20 Fig 5. 40 3 4 f (MHz) V CC = 3.7 V; T amb =25 C. V ctrl = 0 V V ctrl = 15 V Return loss as function of frequency; typical values 0 1 1 V ctrl (V) V CC = 3.7 V; T amb = 25 C. f = MHz f = 0 MHz f = 00 MHz f = 3000 MHz Fig 6. Attentuation as function of control voltage; typical values 001aam677 001aam678 α α (5) (5) (6) (6) 1 40 0 40 80 T amb ( C) V CC = 3.7 V; f = 0 MHz. V ctrl = 0 V V ctrl = 1 V V ctrl = 1.5 V V ctrl = 2 V (5) V ctrl = 7.5 V (6) V ctrl = V Fig 7. Attentuation as function of temperature; typical values 1 40 0 40 80 T amb ( C) V CC = 3.7 V; f = 00 MHz. V ctrl = 0 V V ctrl = 1 V V ctrl = 1.5 V V ctrl = 2 V (5) V ctrl = 7.5 V (6) V ctrl = V Fig 8. Attentuation as function of temperature; typical values All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 2 6 March 2012 7 of 13

001aam679 001aam680 α α (5) (5) (6) (6) Fig 9. 1 40 0 40 80 T amb ( C) V CC = 3.7 V; f = 2000 MHz. V ctrl = 0 V V ctrl = 1 V V ctrl = 1.5 V V ctrl = 2 V (5) V ctrl = 7.5 V (6) V ctrl = V Attentuation as function of temperature; typical values Fig. 1 40 0 40 80 T amb ( C) V CC = 3.7 V; f = 3000 MHz. V ctrl = 0 V V ctrl = 1 V V ctrl = 1.5 V V ctrl = 2 V (5) V ctrl = 7.5 V (6) V ctrl = V Attentuation as function of temperature; typical values 50 001aam681 IP3 i (dbm) 40 30 20 0 0 4 8 12 16 20 V ctrl (V) V CC = 3.7 V; T amb =25 C. f = 0 MHz f = 900 MHz f = 1800 MHz f = 20 MHz Fig 11. Input third-order intercept point as control voltage; typical values All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 2 6 March 2012 8 of 13

9. Package outline Plastic surface-mounted package; 5 leads SOT753 D B E A X y H E v M A 5 4 Q A A 1 c 1 2 3 L p e b p w M B detail X 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 bp c D E e H E Lp Q v w y mm 1.1 0.9 0.0 0.013 0.40 0.25 0.26 0. 3.1 2.7 1.7 1.3 0.95 3.0 2.5 0.6 0.2 0.33 0.23 0.2 0.2 0.1 OUTLINE VERSION REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE SOT753 SC-74A 02-04-16 06-03-16 Fig 12. Package outline SOT753 All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 2 6 March 2012 9 of 13

. Abbreviations Table 9. Acronym PIN RF Abbreviations Description P-type, Intrinsic, N-type Radio Frequency 11. Revision history Table. Revision history Document ID Release date Data sheet status Change notice Supersedes v.2 20120306 Product data sheet - v.1 Modifications: Table 8: updated the tittle v.1 2006 Product data sheet - - All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 2 6 March 2012 of 13

12. Legal information 12.1 Data sheet status Document status [1][2] Product status [3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term short data sheet is explained in section Definitions. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 12.2 Definitions Draft The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 12.3 Disclaimers Limited warranty and liability Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer s own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer s applications and products planned, as well as for the planned application and use of customer s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer s applications or products, or the application or use by customer s third party customer(s). Customer is responsible for doing all necessary testing for the customer s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer s third party customer(s). NXP does not accept any liability in this respect. Limiting values Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 2 6 March 2012 11 of 13

Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors specifications such use shall be solely at customer s own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors standard warranty and NXP Semiconductors product specifications. Translations A non-english (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 12.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 13. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com All information provided in this document is subject to legal disclaimers. NXP B.V. 2012. All rights reserved. Product data sheet Rev. 2 6 March 2012 12 of 13

14. Contents 1 Product profile.......................... 1 1.1 General description..................... 1 1.2 Features and benefits.................... 1 1.3 Applications........................... 1 2 Pinning information...................... 1 3 Ordering information..................... 1 4 Marking................................ 2 5 Limiting values.......................... 2 6 Thermal characteristics.................. 2 7 Characteristics.......................... 2 8 Application information................... 4 8.1 Application circuit....................... 4 8.2 Quad PIN pi attentuator characteristics...... 5 9 Package outline......................... 9 Abbreviations.......................... 11 Revision history........................ 12 Legal information....................... 11 12.1 Data sheet status...................... 11 12.2 Definitions............................ 11 12.3 Disclaimers........................... 11 12.4 Trademarks........................... 12 13 Contact information..................... 12 14 Contents.............................. 13 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section Legal information. NXP B.V. 2012. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 6 March 2012 Document identifier:

2024 © technodocbox.com Privacy Policy | Terms of Service | Feedback