EarthLink Business SIP Trunking Panasnic KX-TDE/NCP IP PBX Custmer Cnfiguratin Guide
Publicatin Histry First Release: Versin 1.0 August 30, 2011 CHANGE HISTORY Versin Date Change Details Changed By 1.0 8/30/2011 Original Dcument Draft Dantley Thmpn 1.1 12/27/2013 Mdified fr Panasnic KX- TDE/NCP Mike Machnik AUTHOR: Dantley Thmpsn EarthLink Engineering 2
Table f Cntents Dcument Purpse 4 Prduct Summary 4 Netwrk Architecture and Design 5 Media Attributes and Cdec Negtiatin 7 Cdec Supprt 7 G.711u 7 G.729a 7 Packetizatin Time 7 DTMF Supprt 7 Fax and Mdem Supprt Requirements 8 Nrth American Numbering Plan Frmat 8 Quality f Service Plicy 8 EarthLink SIP Trunking t IP PBX Interperability 9 Adtran Sftware Versin Tested 9 IP PBX Sftware Versin Tested 9 EarthLink Open Issues & Nn-Supprted Features 9 Panasnic Open Issues & Nn-Supprted Features 9 IP PBX Cnfiguratin fr EarthLink SIP Trunking with Adtran CPE 10 Panasnic KX-TDE/NCP IP PBX Cnfiguratin with Adtran SIP Prxy 10 Panasnic KX-TDE/NCP IP PBX NAT Traversal Cnfiguratin withut Adtran SIP Prxy 24 Prduct Supprt and Cntact Infrmatin 37 EarthLink SIP Trunking Turn-up Testing Prcedure 38 3
Dcument Purpse The purpse f this dcument is t prvide a detailed technical descriptin and best practices fr successful implementatin f the EarthLink SIP Trunking Prduct fr the Panasnic KX-TDE/NCP with the Adtran CPE with and withut SIP Prxy. This dcument prvides infrmatin relative t the verall netwrk tplgy as well as definitin and cnfiguratin standards fr each device assciated with the prduct. Als described within this dcument are prduct guidelines and prduct limitatins. This dcument is t serve as prduct reference and guide t EarthLink Custmers. Prduct Summary The EarthLink Business SIP Trunking prduct is a cmplete VIP (Vice ver IP) slutin based n the SIP (Sessin Initiatin Prtcl) signaling prtcl. The SIP Prtcl is respnsible fr set-up and tear-dwn f vice calls and verall feature and functinality. The SIP Trunking prduct can be ffered as an verlay t several f EarthLink s existing prducts such as Internet and MPLS based prducts. EarthLink Business SIP Trunking slutin will be served ff a MetaSphere Call Feature Server (CFS) frnted by an Oracle/Acme Packet SBC (Sessin Brder Cntrller). The CFS acts as the centerpiece fr call cntrl and feature interactin. The EarthLink Business SIP Trunking Prduct will primarily use Adtran CPE (Custmer Premise Equipment) and will nt be cnfigured as a SIP Prxy. The Panasnic KX-TDE/NCP can be prvisined in tw mdes, NAT Traversal n the Panasnic KX-TDE/NCP r behind the SIP Prxy n the Adtran CPE. The MetaSphere CFS Platfrm is a ge-redundant, high availability slutin and serves as the primary element in EarthLink s Hsted Vice and SIP Trunking Prduct families. In additin t the basic call cntrl, advanced call ruting functinality is available with EarthLink s SIP Trunking prduct with MetaSphere Enhanced Applicatin Server (EAS) Platfrm which cnsists f multiple applicatins and servers integrated int high availability slutin. The Oracle/Acme Packet SBC masks private t public IP Address space t prvide a safe and secure means f cmmunicatin between the SIP Server and IP PBX. All SIP traffic destined t, r riginating frm the MetaSphere CFS, traverses thrugh the Oracle/Acme Packet SBC. The same plicy relates t the CPE device installed at the custmer premise. The Oracle/Acme Packet SBC will reslve NAT (Netwrk Address Translatin) related issues expsed when SIP traffic passes thrugh a firewall. 4
FORWARD HEADSET SPEAKER MESSAGE OK CONTACTS MENU CALL LOG.,@ ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 * [ 0 # PHONE VOLUME MUTE FORWARD HEADSET SPEAKER MESSAGE OK CONTACTS MENU CALL LOG.,@ ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 * [ 0 # PHONE VOLUME MUTE Implementatin Guide Netwrk Architecture and Design The EarthLink Business SIP Trunking slutin cnsists f several key netwrk elements that are cnnected t the existing cre ruting infrastructure. The MetaSwitch Call Feature Server, IP/TDM Gateways, and Oracle/Acme Packet SBC s are gegraphically diverse with reach-ability at bth layer tw and layer three t prvide failver capability and redundancy. Split-Hrizn DNS servers are used t reslve the SIP dmain t the apprpriate reginal SBC. Adtran CPE will be cnnected t the EarthLink netwrk via the traditinal means such as Ethernet, PPP (Pint t Pint Prtcl), r MLPPP (Multilink Pint-t Pint Prtcl). T1, r bnded T1 services MUST be prvisined t either the Adtran TA5000 r directly t the Cisc 7609 (Edge Ruter) t allw fr prper QS (Quality f Service) behavir. The first diagram belw prvides a high level lk at the primary cmpnents that cmplete the SIP Trunking prduct. The secnd diagram prvides a detailed layut fr the cnnectins between the Adtran CPE and Custmers IP PBX. EarthLink Business Prduct Certificatin SIP Trunking Netwrk Tplgy Adtran CPE Cisc P.E. PSTN IP Statin SIP Custmer Ethernet Switch Eth 0/1 Eth 0/2 T1/Ethernet SIP Server EarthLink VIP Netwrk SIP SIP SIP Acme Packet SBC MetaSwitch Applicatin Server IP Statin Split-Hrizn DNS Server Analg Fax Adtran FXS 0/1 Panasnic KX-TDE/NCP Title: EarthLink Business SIP Trunking Test Bed Netwrk Tplgy Rev.01 Date: 8/30/2011 Drawing by: Dantley Thmpsn Figure 1-EarthLink SIP Trunking-Netwrk Tplgy 5
LINK / A C T S T A T PE 1 2 3 4 5 6 7 8 1 9 10 12 13 14 15 16 17 18 19 20 21 22 23 24 G1 G2 G3 G4 CONSOLE 1 3 5 7 9 1 1 1 3 1 5 1 7 1 9 2 1 23 G1 G3 2 4 6 8 1 0 1 2 1 4 1 6 1 8 2 0 2 2 24 Pwer ver Ethernet G2 G4 Implementatin Guide Adtran 900e/Rear-View EarthLink Netwrk 2 EarthLink T1 frm Netwrk t Adtran NET T1 0/1 Adtran ETH 0/1 t Custmers Ethernet Switch Panasnic KX-TDE/NCP Figure 2-EarthLink SIP Trunking-Cnnectins frm Adtran CPE t IP PBX 6
Media Attributes and Cdec Negtiatin Cdec Supprt A vice cdec (cder/decder) is a hardware/sftware mdule/algrithm that takes an analg r digital vice stream and encdes it int an IP packet. Fr the EarthLink Business SIP Trunking Prduct, we currently supprt tw (2) f the mst cmmn cdec s utilized in the cntinental United States, G.711u and G.729a. The preferred cdec ffered by EarthLink in the default cnfiguratin mdel is G.711u, then G.729a. Basically this means that the call will negtiate using the G.711u cdec first, as lng as the terminating end sends G.711u as the first r primary ffered cdec. The paragraphs belw prvide mre detailed infrmatin related t the cdec s and ther requirements assciated with prper negtiatin f the media/rtp. G.711u G.711u is the mst cmmn uncmpressed audi cdec deplyed in the US. Because it is uncmpressed, it supprts the highest level f quality fr the call. Typically the G.711u cnsumes 90Kbps-100Kbps per call. The standard sampling rate f 8kHz is used fr the G.711u cdec. G.729a G.729a is the mst cmmn cdec utilized t supprt cmpressed audi utilized in the US. Because it is cmpressed, it is perceived t have a lwer vice quality than that f G.711u, hwever mst peple wuld never be able t tell the difference. Typically the G.729 cnsumes 30Kbps-40Kbps per call. The standard sampling rate f 8kHz is used fr the G.729a cdec. Packetizatin Time Packetizatin Time determines hw ften the audi stream is sampled and hw ften an IP packet is created. The standard packetizatin times are 10ms, 20ms, 30ms, and 40ms. EarthLink Media Gateway s have been statically cnfigured t use a 20ms packetizatin time. IP Phnes and/r Vice Applicatins will need t cnfigure their equipment fr a 20ms packetizatin time befre audi traffic can be reliably passed acrss the EarthLink IP Vice netwrk. DTMF Supprt EarthLink supprts the transmissin f Dual-Tne Multi-frequency (DTMF) digits thrugh the implementatin f RFC2833. This RFC cvers the basis f including DTMF digits within the media/rtp path f the call. EarthLink recmmends fr Custmers t cnfigure their IP PBX s and/r Vice Applicatins t use RFC2833 t allw fr DTMF t be passed prperly and detected acrss the EarthLink IP Vice netwrk. 7
Fax and Mdem Supprt Requirements Currently, analg devices such as faxes and mdems MUST be prvisined using the G.711u cdec nly. SIP t analg lines are supprted as SIP Lines ff the Adtran FXS Prts r a Cisc 2102 ATA (Analg Terminal Adapter). The custmer may als cnfigure the IP PBX t use analg extensins fr faxes and mdems. This methd can be supprted utilizing the G.711u cdec nly. T.38 is currently nt supprted. Nrth American Numbering Plan Frmat Currently, the EarthLink Business Hsted Vice prduct nly supprts the Nrth American Numbering Plan Frmat. A Glbal Numbering Plan Frmat, such as E.164, is currently nt supprted. Quality f Service Plicy T ensure the best pssible vice quality, EarthLink will mark and match all VIP traffic related t SIP (Sessin Initiatin Prtcl) and RTP (Real-Time Transprt Prtcl). EarthLink VIP and/r Real-Time based appliances and applicatins are cnfigured t use DSCP (Differentiated Services Cde Pint) 46 fr all signaling traffic (SIP) and DSCP 46 fr all Real-Time traffic (RTP) fr Layer three pririty. The Custmers IP PBX MUST als be cnfigured t use DSCP 46 t prvide priritizatin fr SIP and RTP. Marking the DSCP field in the IP packet header will allw fr packet classificatin t be matched and prvide pririty acrss EarthLink s netwrk. This als ensures QS specificatins utlined in SLA (Service Level Agreements) can be sufficiently met between EarthLink and the custmer. 8
EarthLink SIP Trunking t IP PBX Interperability SIP Trunking interperability testing was perfrmed between EarthLink and the IP PBX. All phases f the test plan were executed against the actual cnfiguratin used in a custmer deplyment. The infrmatin belw prvides the Adtran and IP PBX sftware versins tested as well as an issue summary and nn-supprted elements discvered during cmpliance testing in the EarthLink Lab. Adtran Sftware Versin Tested Adtran TA908e versin A4.09 IP PBX Sftware Versin Tested Panasnic KX-TDE/NCP 7.1105 EarthLink Open Issues & Nn-Supprted Features Registratin is currently nt supprted fr the EarthLink SIP Trunking Prduct. T38 faxing is nt currently supprted. Panasnic Open Issues & Nn-Supprted Features UPDATE message releases call. 9
IP PBX Cnfiguratin fr EarthLink SIP Trunking with Adtran CPE The steps belw prvide a step by step guide fr cnfiguratin f the Panasnic KX-TDE/NCP fr the EarthLink SIP Trunking Prduct. Basic cnfiguratin f the Panasnic KX-TDE/NCP shuld be cmplete and the Panasnic KX-TDE/NCP must be cnnected t the LAN prir t cnfiguring the system fr SIP Trunking. Panasnic KX-TDE/NCP IP PBX Cnfiguratin with Adtran SIP Prxy SIP trunk cnfiguratin fr Panasnic KX-TDE/NCPE prvided by Labib Labib f Panasnic. EarthLink SIP Trunks Cnfiguratin Guide (Prxy Slutin) PBX Platfrm: KX-TDE/NCP 10
Overview This dcument describes the cnfiguratin prcedures required fr the KX-TDE100/200/600 and NCP500/1000 t make full use f the capabilities f EarthLink SIP Trunks Services. The SIP trunks services f the TDE/NCP PBX are prvided thrugh virtual CO line cards (V-SIPGW16) which are designed t be easily integrated int an Internet Telephny Service prvided by an ITSP (Internet Telephny Service Prvider). This guide describes the specific cnfiguratin items fr the virtual SIP Gateway card in additin t the PBX basic cnfiguratin related t SIP trunks functinality. It als describes basic Netwrk cnfiguratin t familiarize dealers with the netwrk setup. It des nt describe the purpse and use f all cnfiguratin ptins n the virtual SIP Gateway card. Fr thse details, see the KX-NCP500/1000 and KX-TDE100/200/600 Prgramming Manual fr Virtual SIP CO Line Card and the KX-TDE100/200/600 and KX-NCP500/1000 Manuals available frm Panasnic reseller website. 11
DSP card and Activatin keys The PBX has t be equipped with a DSP card in rder t prvide cmmunicatin between the TDM side f the PBX and the SIP trunks. Activatin keys fr SIP-Trunks has t be installed in the PBX t prvide the SIP-trunks functinality Architecture Overview The fllwing diagram illustrates simple VOIP netwrks cnnecting the TDE/NCP PBX: The Case f EarthLink Setup: EarthLink will setup the prxy service using an IAD IAD/ default GW 192.168.0.1 MPR IP Address 192.168.0.101 12
Basic V-SIPGW16 Settings fr EarthLink Trunks 1-Install the PBX Maintenance cnsle int yur PC The maintenance cnsle shuld be available t certified dealers; Dealers can get the latest versin f the UPCMC frm www.psnareseller.cm (UPCMC versin 7.7.1.0 r higher) 2- Cnnect t the PBX Start the UPCMC Click Cnnect and chse the methd f cnnectin using either LAN, RS-232, r Mdem t Cnnect t yur PBX fr interactive cnfiguratin ** We will be using the LAN methd thrughut this guide** 13
Prvide the IP address f the MPR card and the passwrd f the INSTALLER Level G t 1-Cnfiguratin, 1-Slt, mve yur muse ver the MPR card and select the card prperty Make sure that the default gateway shuld be the end ruter LAN IP address 14
Make sure that yu have a valid DSP-VOIP LAN address 3- Installing V-SIP W16 card G t 1-Cnfiguratin, 1-Slt, mve yur muse twards the IPCMPR virtual shelf and click n select shelf 15
Highlight the V-SIPGW16 card frm the cards list in the left side Drag the VSIPGW16 card int the trunk prtin f the virtual shelf by using the PC muse lift buttn Release the Muse lift buttn and click Yes n the dialgue bx Take the V-SIPGW16 card OUS in rder t be able t enter the fllwing settings 16
4-Cnfiguring the VSIP-GW16 card a- Shelf Prperty settings: Mve the cmputer muse ver the VSIPGW16 card and chse Shelf prperty Change the SIP Client Prt Number t 5060. 17
Click Apply and then OK t exit the shelf prperty settings screen. G t Utility in the PCMC Menu, and chse Reset By Cmmand frm the drp dwn menu Chse SD Backup and Fllw the prmpts t reset the PBX and keep the present files in rder fr the abve changes t take effect. 18
b- Prt Prperty settings: Mve the cmputer muse ver the VSIPGW16 card and chse prt prperty Basic Channel setup: Please lcate the EarthLink SIP Trunks accunt details frm yur EarthLink accunt Welcme letter/email... Main tab: Accrding t the standard EarthLink SIP trunk accunt, we need t cnfigure the Basic Channel Prt as fllws: 1- Prt 1 channel attribute = Basic channel 2- Prvider name= EarthLink 3- SIP Server Name= 192.168.0.1 ( IAD IP address) 4- SIP server prt number =5060 5- SIP service Dmain = blank 6- Subscriber number = 1234567890 (EarthLink Accunt DID/BTN) Accunt tab: 1- user name == BTN 2- Authenticatin ID== same asusername 3- Passwrd == Blank Register Tab: 1- Register Ability= Disable NAT Tab: Same as default Optin Tab: 19
1- Diversin Header = Enable Calling Party tab: 1-P-Asserted Identity Header= Enable N.B..PBX CLIP is supprted as User Part f the FROM Header, Yu can use ONLY valid DID s as PBX CLIP ISDN CLIP Prgramming Hints: 20
Called party Tab: Same as default Vice/Fax Tab: Changes frm Default settings: fr all channels 1-1 st Cdec Pririty = G.729 a 2-2 nd Cdec Pririty = G.711u 3-3 rd Cdec Priirty = Nne RTP/RTCP Tab: Same as default T.38, T.38 Optin Same as default DSP Same as default Supplementry services: Changes frm Default settings: 1- CNIP (Receive) = Yes ( All Channels, Basic and Additinal) 2- Attended Transfer (REFER)= Yes ( All Channels, Basic and Additinal) 3- Blind Transfer (REFER)= Yes ( All Channels, Basic and Additinal) Additinal DID s Please set the channel attribute fr number f prts depending n the number f active SIP lines as additinal channel fr channel 1 21
Fr example,if there are 3 Simultaneus calls can be received n this trunk, the number f V-SIPGW prts t be set as additinal channel fr channel 1 will be 2 prts Essential PBX Cnfiguratin: Please lcate yur DID infrmatin in the EarthLink Welcme letter/accunt Prtal T Assign the DID numbers destinatins, G t 10-3.CO & Incming Call DID table EarthLink 22
SIP trunks Activatin keys: 1- The DSP card installed nt the PBX MPR Card has preinstalled number f SIP trunks activatin keys (DSP4 and DSP16 have 4 IP trunks and DSP64 has 16 IP trunks) 2- T btain additinal activatin keys, yu need t purchase the apprpriate activatin key cdes (Fr IP Trunks) and access the Key Management System. Yu can dwnlad the activatin keys as an activatin key file frm the Key Management System. T dwnlad the activatin keys, enter the MPR ID number shwn n the IPCMPR Card in the PBX, and activatin key number and registratin ID prvided n each activatin key cde. 3- T check the Number f Activatin Keys Installed int yur system G t 1- Cnfiguratin, 1-Slt, click n Activatin Keys (Tp f the PBX image) Minimum System Sftware requirements: UPCMC NCP TDE 100/200 TDE600 V7.7.1.0 r higher V6.1105 r higher V7.1105 r higher V7.1105 r higher Useful Hints: 1- Update yur system sftware nce the update is available thrugh the Dealer website t make use f added features and imprved functinality 2- Update yur PCMC (Maintenance Tl) with the latest versin available n the BTS website and thrugh Panasnic Tech supprt department 3- Back up yur cnfiguratin file with the Gd knwn settings 4- Cnsult with yur netwrk administratr prir t installatin t guarantee a smth setup fr yur system ver the existing netwrk 23
Panasnic KX-TDE/NCP IP PBX NAT Traversal Cnfiguratin withut Adtran SIP Prxy EarthLink SIP Trunks Cnfiguratin Guide (NAT Traversal Slutin) Overview PBX Platfrm: KX-TDE/NCP This dcument describes the cnfiguratin prcedures required fr the KX-TDE100/200/600 and NCP500/1000 t make full use f the capabilities f EarthLink SIP Trunks Services. The SIP trunks services f the TDE/NCP PBX are prvided thrugh virtual CO line cards (V-SIPGW16) which are designed t be easily integrated int an Internet Telephny Service prvided by an ITSP (Internet Telephny Service Prvider). This guide describes the specific cnfiguratin items fr the virtual SIP Gateway card in additin t the PBX basic cnfiguratin related t SIP trunks functinality. It als describes basic Netwrk cnfiguratin t familiarize dealers with the netwrk setup. It des nt describe the purpse and use f all cnfiguratin ptins n the virtual SIP Gateway card. Fr thse details, see the KX-NCP500/1000 and KX-TDE100/200/600 Prgramming Manual fr Virtual SIP CO Line Card and the KX-TDE100/200/600 and KX-NCP500/1000 Manuals available frm Panasnic reseller website. DSP card and Activatin keys The PBX has t be equipped with a DSP card in rder t prvide cmmunicatin between the TDM side f the PBX and the SIP trunks. Activatin keys fr SIP-Trunks has t be installed in the PBX t prvide the SIP-trunks functinality 24
Architecture Overview The fllwing diagram illustrates simple VOIP netwrks cnnecting the TDE/NCP PBX: The Case f EarthLink Setup: EarthLink will prvide services directly thrugh its SBC. Public IP address will be prvided and prgrammed as WAN side IP address f the end ruter in the PBX site. EarthLink SBC: End Ruter IP address: 1.2.3.4 LAN Default GW: MPR IP Address 192.168.0.101 Prt Frwarding is required in the end ruter: Prt 5060 UDP t be FWD t MPR IP address (192.168.0.101) Prt range 16000~16063 UDP t be FWD t DSP VOIP IP address (192.168.0.102) 25
Basic V-SIPGW16 Settings fr EarthLink Trunks 1-Install the PBX Maintenance cnsle int yur PC The maintenance cnsle shuld be available t certified dealers; Dealers can get the latest versin f the UPCMC frm www.psnareseller.cm (UPCMC versin 7.7.1.0 r higher) 2- Cnnect t the PBX Start the UPCMC Click Cnnect and chse the methd f cnnectin using either LAN, RS-232, r Mdem t Cnnect t yur PBX fr interactive cnfiguratin ** We will be using the LAN methd thrughut this guide** Prvide the IP address f the MPR card and the passwrd f the INSTALLER Level 26
G t 1-Cnfiguratin, 1-Slt, mve yur muse ver the MPR card and select the card prperty Make sure that the default gateway shuld be the end ruter LAN IP address Make sure that yu have a valid DSP-VOIP LAN address 27
3- Installing V-SIP W16 card G t 1-Cnfiguratin, 1-Slt, mve yur muse twards the IPCMPR virtual shelf and click n select shelf Highlight the V-SIPGW16 card frm the cards list in the left side Drag the VSIPGW16 card int the trunk prtin f the virtual shelf by using the PC muse lift buttn Release the Muse lift buttn and click Yes n the dialgue bx 28
Take the V-SIPGW16 card OUS in rder t be able t enter the fllwing settings 4-Cnfiguring the VSIP-GW16 card a- Shelf Prperty settings: Mve the cmputer muse ver the VSIPGW16 card and chse Shelf prperty 29
**Take the SIP-GW card Out f Service (OUS) in rder t change the default settings as belw: Change the SIP Client Prt Number t 5060. Change the NAT traversal methd t Fixed IP address Prvide the Public IP address f yur end ruter (i.e. 1.2.3.4) Click Apply and then OK t exit the shelf prperty settings screen. G t Utility in the PCMC Menu, and chse Reset By Cmmand frm the drp dwn menu Chse SD Backup and Fllw the prmpts t reset the PBX and keep the present files in rder fr the abve changes t take effect. 30
b- Card Prperty settings: G t the Virtual Shelf f the PBX Mve the cmputer muse ver the VSIPGW16 card and chse Card prperty Click n Cmmn settings DNS Server IP address methd is Manual Prvide yur ISP DNS serevers IP addresses. (Cntact yur ISP t btain DNS IP addresses if needed) Click Apply and then OK Click Cancel n the card prperty- Virtual SIP gateway screen t exit this screen 31
c- Prt Prperty settings: Mve the cmputer muse ver the VSIPGW16 card and chse prt prperty Basic Channel setup: Please lcate the EarthLink SIP Trunks accunt details frm yur EarthLink accunt Welcme letter/email... Main tab: Accrding t the standard EarthLink SIP trunk accunt, we need t cnfigure the Basic Channel Prt as fllws: 7- Prt 1 channel attribute = Basic channel 8- Prvider name= EarthLink 9- SIP Server Name= stat-msblt.viplab.elnk.us ( Earthlink SBC address) 10- SIP server prt number =5060 11- SIP service Dmain = blank 12- Subscriber number = 1234567890 (EarthLink Accunt DID/BTN) Accunt tab: 4- user name == BTN ( Example : 1234567890) 5- Authenticatin ID== same asusername 6- Passwrd == Blank Register Tab: 2- Register Ability= Disable NAT Tab: Same as default Optin Tab: 1- Diversin Header = Enable 32
Calling Party tab: 1-P-Asserted Identity Header= Enable N.B..PBX CLIP is supprted as User Part f the FROM Header, Yu can use ONLY valid DID s as PBX CLIP ISDN CLIP Prgramming Hints: Called party Tab: Same as default Vice/Fax Tab: Changes frm Default settings: Fr ALL channels 4-1 st Cdec Pririty = G.729 a 5-2 nd Cdec Pririty = G.711u 6-3 rd Cdec Priirty = Nne RTP/RTCP Tab: Same as default T.38, T.38 Optin Same as default 33
DSP Same as default Supplementry services: Changes frm Default settings: 4- CNIP (Receive) = Yes ( All Channels, Basic and Additinal) 5- Attended Transfer (REFER)= Yes ( All Channels, Basic and Additinal) 6- Blind Transfer (REFER)= Yes ( All Channels, Basic and Additinal) Additinal DID s Please set the channel attribute fr number f prts depending n the number f active SIP lines as additinal channel fr channel 1 Fr example, if there are 3 Simultaneus calls can be received n this trunk, the number f V-SIPGW prts t be set as an additinal channel fr channel 1 will be 2 prts 34
Essential PBX Cnfiguratin: Please lcate yur DID infrmatin in the EarthLink Welcme letter/accunt Prtal T Assign the DID numbers destinatins, G t 10-3.CO & Incming Call DID table EarthLink SIP trunks Activatin keys: 4- The DSP card installed nt the PBX MPR Card has preinstalled number f SIP trunks activatin keys (DSP4 and DSP16 have 4 IP trunks and DSP64 has 16 IP trunks) 5- T btain additinal activatin keys, yu need t purchase the apprpriate activatin key cdes (Fr IP Trunks) and access the Key Management System. Yu can dwnlad the activatin keys as an activatin key file frm the Key Management System. T dwnlad the activatin keys, enter the MPR ID number shwn n the IPCMPR Card in the PBX, and activatin key number and registratin ID prvided n each activatin key cde. 6- T check the Number f Activatin Keys Installed int yur system G t 1- Cnfiguratin, 1-Slt, click n Activatin Keys (Tp f the PBX image) 35
Minimum System Sftware requirements: UPCMC NCP TDE 100/200 TDE600 V7.7.1.0 r higher V6.1105 r higher V7.1105 r higher V7.1105 r higher Useful Hints: 5- Update yur system sftware nce the update is available thrugh the Dealer website t make use f added features and imprved functinality 6- Update yur PCMC (Maintenance Tl) with the latest versin available n the BTS website and thrugh Panasnic Tech supprt department 7- Back up yur cnfiguratin file with the Gd knwn settings 8- Cnsult with yur netwrk administratr prir t installatin t guarantee a smth setup fr yur system ver the existing netwrk 36
Prduct Supprt and Cntact Infrmatin The infrmatin belw prvides cntact infrmatin fr assistance in cnfiguratin and trubleshting EarthLink s SIP Trunking service. EarthLink Supprt: (800)239-3000 24x7 Supprt Availability http://www.earthlinkbusiness.cm/supprt/supprt.xea Panasnic: Mn-Fri 9am 9pm EST 1-800-528-6747 Optin 1 http://www.panasnic.cm/business/unified-cmmunicatin/supprt.asp 37
EarthLink SIP Trunking Turn-up Testing Prcedure T ensure prper call negtiatin can be established between EarthLink and the IP PBX, the test steps belw MUST be executed during the initial turn-up prcess. SIP Trunking Test Steps: 1. Test an utbund call t a Lcal Number. Check fr Ring-back, 2-way Audi, and Call Quality. 2. Test an utbund call t a Lng Distance Number. Check fr Ring-back, 2-way Audi, and Call Quality. 3. Test an utbund call t an Internatinal Number. Check fr Ring-back, 2-way Audi, and Call Quality. 4. Test an utbund call t a Tll-Free Number. Check fr Ring-back, 2-way Audi, and Call Quality. 5. Test an inbund call that lasts greater than 10 minutes 6. Test an utbund call that lasts greater than 10 minutes 7. Test simultaneus inbund and utbund calls t PSTN 8. Test an utbund Call t Operatr 0 9. Test an utbund Call t Directry Assistance 411 10. Test a 911 Call (IDENTIFY TO THE 911 OPERATOR THAT THIS IS A TEST). Ask them t prvide phne number, address and secndary r alternate number if available. 11. Test an inbund call t an internal DID. Check fr Ring-back, 2-way Audi, and Call Quality. 12. Test an inbund call t Aut-Attendant. Check DTMF and Call Quality 13. Test an utbund call t an Aut-Attendant/IVR and verify DTMF 14. Test Call Transfer ff-site 15. Test Call Frward ff-site Ntes: 38