HEVY DUTY FLOOR OXES >>> NEW High resistance for high requirement For highly frequented areas, requiring important mechanical resistance and/or washing down. heavy duty in-screed floor box s 896 83 896 85 NEW 896 83 896 86 896 87 896 83 896 88 For highly frequented areas, requiring important mechanical resistance and/or washing down Conform to standard EN 60-670 and EN 50 085-2-2 Cat.Nos Metal in-screed floor box Junction or connection point according to type of cover associated For junction of LV and ELV cabling and/or installation of floor boxes Height adjustable from 105 mm to 140 mm using 4 inserts located in the box corners and a tool adapting to electric drill or screwdriver endable side walls for assembling with different sizes of floor ducts Supplied with worksite protection cover to be replaced by blanking cover plate or mounting cover plate llowing floor covering infill between 6 and 24 mm 1 Universal metal in-screed backbox 774 Meets sturdiness requirements Perfect solution for shopping centres, car showrooms, exhibition halls, airports Heavy load support: 8 and 20 KN load resistance 3 types of cover: - IP 66 plain cover for all types of floors - IP 66 for marble and tiled floors - IP 30 for wooden floors Red catalogue numbers: New products ccessories for metal in-screed floor box 1 896 83 Normal load support Up to 8 KN load with deflection < 6 mm 1 896 84 Heavy load support Up to 20 KN load with deflection < 3 mm 6 896 39 Set of 2 conduit adaptors for metal cavity floor box Cat.No Plates for metal in-screed floor boxes For metal in-screed floor box Cat.No Use support Cat.No 896 83 or 896 84 ll types of floors IP 66 plain cover (cover closed) ccess trap for junction, no cable exit 1 896 85 IP 66 plain plate Marbled and tiled floors IP 66 plate (cover closed and plugs not connected) with central cable exit 1 896 86 IP 66 plate with central cable exit To receive 24 mosaic modules Supplied with all necessary wiring accessories supports ccessory for plate with central cable exit 1 896 87 IP 52 cable exit accessory for IP 66 cover plate Cat.No 896 86 Wooden floors 1 896 88 IP 30 plate with 2 lateral cable exits To receive 24 mosaic modules Supplied with all necessary wiring accessories supports
floor service outlet boxes and access units for raised or concrete floors 896 44 896 05 896 11 equipped with Mosaic sockets Conform to standard EN 60-670 and EN 50085-2-2 (p. 777) Workstation connection for raised floor or concrete floor, using plastic or metal backbox (p. 776) Supplied with reversible stainless steel cover or cover for carpet For technical space 75 mm Mounting boxes (for horizontal wiring device positioning): - height adjustable from 75 to 105 mm - ensure perfect cable separation - takes 2 flexible conduits Ø20 mm - shifted from one another for optimal connection for all sockets - take marking labels Easy opening cover with rings and holding in open position during connection 896 26 896 49 Cat.Nos djustable height from 75 to 105 mm to be equipped Cat.Nos Height reduced to 65 mm to be equipped (continued) Floor service outlet boxes equipped with empty mounting boxes To be equipped with Mosaic wiring accessories 12 modules 1 896 05 With stainless steel cover 1 896 06 With cover for carpet 1 896 07 With cover for carpet eige RL 1019 18 modules 1 896 10 With stainless steel cover 1 896 11 With cover for carpet 1 896 12 With cover for carpet eige RL 1019 24 modules 1 896 15 With stainless steel cover 1 896 16 With cover for carpet 1 896 17 With cover for carpet eige RL 1019 Height reduced to 65 mm to be equipped For technical space 65 mm For renovation with reduced height technical floor or Supplied with reversible stainless steel cover or cover for carpet or parquet Mounting boxes (for vertical wiring device positioning): - supplied with blanking plates requiring sufficient space between the sockets if angled plugs are used - to be equipped with 2 module Mosaic socket outlets - takes marking labels - ensures perfect cable separation Easy opening cover by rings and holding in open position during connection 10 modules For installing 4 x 2 modules Mosaic and 2 x 1 module Mosaic 1 896 20 With stainless steel cover, grey RL 7031 1 896 21 With cover for carpet, grey RL 7031 1 896 22 With cover for carpet, beige RL 1019 16 modules For installing 8 x 2 modules Mosaic 1 896 25 With stainless steel cover, grey RL 7031 1 896 26 With cover for carpet, grey RL 7031 1 896 27 With cover for carpet, beige RL 1019 ccess units ccess units for raised or concrete floor (minimum height 90 mm) Supplied with stainless steel cover or cover for carpet Small dimensions 1 896 90 With cover for carpet 1 896 91 With stainless steel cover Large dimensions 1 896 94 With cover for carpet 1 896 95 With stainless steel cover Floor service outlet boxes - 3 modules ccess units for raised or concrete floor (minimum height 80 mm) To be equipped with: 1 Mosaic socket outlet 2PE 2 modules and 1 Mosaic RJ 45-1 module or 1 rteor socket outlet 2PE and 1 rteor RJ 45 1 module 1 896 44 Floor service outlet box - 3 modules 1 896 49 Flush-mounting box for concrete for Cat.No 896 44 Plastic floor boxes s (p. 776) Red catalogue numbers: New products 775
metal and plastic backboxes PVC floor duct 896 60 896 61 896 69 896 30 Cat.Nos djustable metal backbox Universal backbox For junction of LV and ELV cabling and/or installation of floor boxes Height adjustable from 56 mm to 140 mm using 4 screws located in the box corners and a tool adapting to electric drill or screwdriver endable side walls for joining with different sizes of floor ducts Supplied with worksite protection cover to be replaced by blanking cover plate or mounting cover plate 1 Universal metal in-screed backbox Cover plates Thickness 3 mm 5 896 35 lanking cover plates for simple junction 5 896 36 daptor plate for floor boxes 12 modules, or floor boxes of reduced height 10 modules 5 896 37 daptor plate for floor boxes 18 modules 5 896 38 daptor plate for floor boxes 24 modules, or floor boxes of reduced height 16 modules uto-adjustable plastic backboxes for concrete floor For integration of floor boxes in in-screed floor installations Power supply by flexible conduits Ø16, 20 and 25 mm Supplied with polystyrene for easy installation 1 896 30 For integration of 12 modules floor boxes or 10 modules reduced height floor boxes 1 896 31 For integration of 18 modules floor boxes 1 896 32 For integration of 24 modules floor boxes or 16 modules reduced height floor boxes Snapfitting of sections Cat.No 896 61 with Cat.No 896 60 Cat.Nos PVC floor duct IP 40 - IK 08 For distributing LV and ELV cabling in concrete floor installations Combines with metal backbox for cable junction or floor box installation Length: 2 m Can be assembled to make the number of compartments required (for immediate use or standby) Height 28 mm 16 896 60 (1) 50 x 28 mm with 1 compartment 12 896 61 (1) 100 x 28 mm with 2 compartments 14 896 62 (1) 150 x 28 mm with 3 compartments 6 896 63 (1) 200 x 28 mm with 4 compartments Height 38 mm 12 896 67 (1) 50 x 38 mm with 1 compartment 16 896 68 (1) 100 x 38 mm with 2 compartments 10 896 69 (1) 150 x 38 mm with 3 compartments 8 896 70 (1) 200 x 38 mm with 4 compartments Fixing / coupling accessories 896 74 For fixing floor ducts on floor and junction between ducts 5 896 74 For duct width 100 mm 5 896 75 For duct width 150 mm 5 896 76 For duct width 200 mm 5 896 77 For duct width 250 mm 5 896 78 For duct width 300 mm Floor service outlet boxes (p. 775) (1) Number of metres contained in pack 776
PVC floor duct and backboxes floor service outlet boxes and access units PVC floor duct and backboxes installation principle Standard EN 50085-2-2 concerns systems for distributing currents in the floor (sunken or surface-mounted) It ensures consistent performance along the entire distribution length up to the user connection point Classification for distribution system by floor Underfloor box fixing Height adjustment Placing the floor ducts Placing the lateral sides Pouring the concrete Cover change Placing the floor box Dimensions 450 480 450 56-140 6.2 6.3 6.3 6.3 6.4 6.5 6.6 Resistance to impact for installation and application Minimum storage and transport temperature Minimum installation and application temperature Maximum application temperature Resistance to flame propagation Electrical continuity characteristics Electrical insulating characteristics Embedded in floor On floor 5 J 5 J 5 J - 25 C - 25 C - 25 C - 5 C - 5 C - 5 C 60 C 60 C 60 C Heavy duty floor system Non propagating Non propagating Non propagating Without continuity Without continuity Without continuity Without electrical insulating characteristic 6.7 Degree of protection provided by enclosure IP30 6.9 System access cover retention 6.101 Floor treatment Dry floor treatment Resistance to a vertical 6.102 load applied over a small surface area Optional classification according to resistance 6.103 to a vertical load applied over a large surface area Without electrical insulating characteristic IP20 Without electrical insulating characteristic IP66 () IP30 () With a tool With a tool With a tool Dry floor treatment Wet floor treatment 750 N 750 N 3000 N 3000 N 3000 N 15000 N Selection tables for mounting cover plate and floor box Cover For floor boxes plate djustable height Reduced height 75 to 105 mm 65 mm 896 36 896 37 896 38 12 modules 10 modules 896 05/06/07 896 20/21/22 18 modules 896 10/11/12 24 modules 16 modules 896 15/16/17 896 25/26/27 PVC floor boxes and underfloor boxes installation principle Choice of plastic underfloor box according to the floor box to be installed Composition and function with distribution systems embedded in floor Floor service outlet boxes and access units and heavy duty boxes 896 05 896 06 896 07 896 20 896 21 896 90 896 91 896 10 896 11 896 12 896 15 896 16 896 17 896 25 896 26 896 94 896 95 () 896 85 896 86 () 896 88 With metal flush-mounting boxes Metal boxes Plastic trunking Fixing 896 36 896 37 896 38 896 84 see (1) see (2) see (1) see (2) Width (mm) 100 150 200 250 300 Height (mm) 28 38 28 38 28 38 28 38 28 38 Plastic trunking (1) 896 61 896 68 896 62 896 69 896 63 896 70 896 63 896 60 896 70 896 67 896 63 896 61 Fixing (2) 896 74 896 75 896 76 896 77 896 78 896 70 896 68 H Composition and function with distribution sytem on floor 105 75 18-48 65 18-48 Dim. trunking 92 x 20 Cat.No 328 00 Nbr of compartments 4 Distribution box Cat.No 328 01 Cat.Nos (mm) (mm) 896 05/06/07/20/21/22 215 255 896 10/11/12 255 255 ccessories for over floor trunking Mini-column Flat angle Cat.No 328 02 Cover joint Cat.No 328 03 End cap Cat.No 328 07 White Cat.No 307 42 lu Cat.No 307 29 896 15/16/17/25/26/27 310 255 Column modules see p. 788-789 777
floor units surface or flush-mounting grommet flush-mounting 317 48 317 49 Equipped with sockets, to be ordered separately 893 07 6503 00 6503 49 Cat.Nos Small aluminium access grommet ody - cast aluminium Main jaw - injection mouled plastic Nylon 66 Inner jaws - closed cell Neoprene Recommended hole cut-out size: 127 mm diameter Will fit floor tile thickness range of 25 to 55 mm Can form the base of a cable management products such as power posts and poles Standard depth: 60 mm 1 893 07 ccess grommet IP 20 - IK 08 6503 90 Cat.Nos Surface-mounting floor sockets to be equipped Empty electrical wiring accessories to be equipped with Mosaic screw connection sockets (p. 798) Equipped with pivoting wiring supports for easy installation of sockets Can be combined with floor duct Cat.No 328 00 Can be illuminated with LED Cat.No 899 06 5 317 48 2 x 4 modules 5 317 49 3 x 4 modules 10 899 06 LED to be wired, 230 V High luminescence orange neon Flush-mounting floor sockets to be equipped Empty receptacles for floor sockets 1 6503 00 3 modules - luminium 1 6503 50 3 modules - rass 1 6503 49 2 x 3 modules - luminium Flush-mounting boxes for floor sockets 10 6503 90 3 modules - Plastic 10 6503 31 2 x 3 modules For floor box Cat.No 6503 49 - Plastic 1 6503 32 3 modules (can be assembled with another Cat.No 6053 32 to compose a 2 x 3 modules box) Metallic 778
over floor trunking 300 92 300 93 328 00 Conform to standard EN 50085-2-2 For creating a link between trunking, column, mini-column, floor units or protecting cables on passageways Supplied with cover Cat.Nos Over floor trunking 50 x 12 mm Cat.Nos Over floor trunking 92 x 20 mm Trunking 54 300 92 (1) Length 2 m, supplied with cover 3 compartments Capacity 1: max. Ø9 mm Capacity 2: max. Ø6 mm IP 40 - IK 07 RL 7030 ccessories 10 300 12 Cover joint 10 300 11 Flat angle 4 300 13 Junction box 2 50 1 12 Trunking 20 328 00 (1) Length 2 m, supplied with cover 4 compartments Equipped with 2 adhesive strips for better floor fixing Capacity 1: max. Ø14.5 mm Capacity 2: max. Ø9.5 mm IP 40 - IK 08 RL 7016 ccessories 10 328 07 End cap 10 328 03 Cover joint 2 92 20 1 1 : maxi Ø 14,5 m Over floor trunking 75 x 18 mm Trunking 36 300 93 (1) Length 2 m, supplied with cover 3 compartments Capacity 1: max. Ø14 mm Capacity 2: max. Ø11 mm IP 40 - IK 07 RL 7030 ccessories 10 300 19 Cover joint 10 300 18 Flat angle 4 300 13 Junction box 2 75 1 18 5 328 02 Flat angle 1 328 05 Connection for mini-trunking installed as 60 x 20 or 75 x 20 skirting trunking 5 328 01 Distribution box For spurs in 4 directions with separation of currents Junction for trunkings To be used with Cat.No 328 00 5 107 71 106 90 For cover 65 mm 5 107 72 106 90 For cover 85 mm (1) Number of metres in pack 779
desktop multi-outlet extensions without cord NEW desktop multi-outlet extensions to be equipped 6535 50 535 90 6535 51 535 91 6535 53 535 99 535 97 luminium extensions with reversible cable guide for grouping cords of connected devices High current connection on terminal blocks with cable grip For low current sockets, connection on RJ 45 sockets or area distribution box with specific cord RJ 45/stripped Cat.Nos 517 96/97/98 (see p. 879) 2PE sockets with 45 sloping screw recesses for easy insertion of angled plug 16-250 V - with shutters 3680 W at 230 V per circuit Supplied without cord Conform to IEC 60-884-1 Cat.Nos With high-current sockets 1 6535 50-6 x 2PE sockets - 1 illuminated switch 1 6535 51-2 x 2PE sockets - 2 x 2PE tamperproof sockets With high-current and low-current sockets 1 6535 52-4 x 2PE sockets - 3 x RJ 45 sockets Cat. 6 UTP 1 module 1 6535 53-2 x 2PE sockets - 2 x 2PE tamperproof sockets - 2 x RJ 45 sockets Cat. 6 UTP - 2 blanking plates 1 module for VDI Cat.Nos Empty aluminium extensions luminium extensions with cable guide (reversible) To be equipped with Mosaic sockets 1 535 90 8 modules 1 535 91 12 modules 1 535 92 16 modules ccessories Fixing accessory 5 535 99 Fixing accessory to clip on desktop Cable worm Very suitable solution for a safe and design protection of the cabling between desk and floor 1 535 97 2 compartments Length: 770 mm Ø70 mm Translucid 780 Red catalogue numbers: New products