<<< HEVY DUTY FLOOR OXES NEW High resistance for high requirement For highly frequented areas, requiring important mechanical resistance and/or washing down. Heavy duty floor box For concrete floors 896 34 + 896 83 + 896 85 NEW 896 34 + 896 83 + 896 86+ 896 87 896 34 + 896 83 + 896 88 For highly frequented areas, requiring important mechanical resistance and/or washing down Conform to standard EN 60-670 and EN 50 085-2-2 Pack Cat.No. Metal in-screed floor box Junction or connection point for concrete floor according to type of cover associated For junction of LV and ELV cabling and/or installation of floor boxes Height adjustable from 05 mm to 40 mm using 4 inserts located in the box corners and a tool adapting to electric drill or screwdriver endable side walls for assembling with different sizes of floor ducts Supplied with worksite protection cover to be replaced by blanking cover plate or mounting cover plate llowing floor covering infill between 6 and 24 mm 896 34 Universal metal in-screed backbox ccessories for metal in-screed floor box 896 83 Normal load support Up to 8 KN load with deflection < 6 mm 896 84 Heavy load support Up to 20 KN load with deflection < 3 mm Meets sturdiness requirements Perfect solution for shopping centres, car showrooms, exhibition halls, airports Heavy load support: 8 and 20 KN load resistance 3 types of cover: - IP 66 plain cover for all types of floors - IP 66 for marble and tiled floors - IP 30 for wooden floors 6 896 39 Set of 2 conduit adaptors for metal cavity floor box Cat.No 896 34 Plates for metal in-screed floor boxes For metal in-screed floor box Cat.No 896 34 Use support Cat.No 896 83 or 896 84 ll types of floors IP 66 plain cover (cover closed) ccess trap for junction, no cable exit 896 85 IP 66 plain plate Marbled and tiled floors IP 66 plate (cover closed and plugs not connected) with central cable exit 896 86 IP 66 plate with central cable exit To receive 24 mosaic modules Supplied with all necessary wiring accessories supports ccessory for plate with central cable exit 896 87 IP 52 cable exit accessory for IP 66 cover plate Cat.No 896 86 Wooden floors 896 88 IP 30 plate with 2 lateral cable exits To receive 24 mosaic modules Supplied with all necessary wiring accessories supports 302
Metal in-sceed floor box Floor service outlet boxes and access units n PVC floor duct and backboxes installation principle Standard EN 50085-2-2 concerns systems for distributing currents in the floor (sunken or surface-mounted) It ensures consistent performance along the entire distribution length up to the user connection point n Classification for distribution system by floor Underfloor box fixing Height adjustment Placing the floor ducts Placing the lateral sides Pouring the concrete Cover change Placing the floor box n Dimensions cat. no. 896 34 450 480 450 56-40 6.2 6.4 6.5 6.6 Resistance to impact for installation and application Minimum storage and transport temperature Minimum installation and application temperature Maximum application temperature Resistance to flame propagation Electrical continuity s Electrical s Embedded in floor On floor 5 J 5 J 5 J - 25 C - 25 C - 25 C - 5 C - 5 C - 5 C + 60 C + 60 C + 60 C Heavy duty floor system Non propagating Non propagating Non propagating Without continuity Without continuity Without continuity 6.7 Degree of protection provided by enclosure IP30 6.9 System access cover retention 6.0 Floor Dry floor Resistance to a vertical 6.02 load applied over a small surface area Optional classification according to resistance 6.03 to a vertical load applied over a large surface area IP20 IP66 () IP30 () With a tool With a tool With a tool Dry floor Wet floor 750 N 750 N 3000 N 3000 N 3000 N 5000 N n Composition and function with distribution sytem on floor Dim. trunking 92 x 20 Cat.No 328 00 Nbr of compartments 4 Distribution box Cat.No 328 0 Flat angle Cat.No 328 02 ccessories for over floor trunking Cover joint Cat.No 328 03 End cap Cat.No 328 07 Cat.No 307 42 Mini-column lu Cat.No 307 29 Column modules see p. 308 303
<<< FLOOR OXES Floor boxes Perfect integration! Legrand provides equipment for your raised floors and concrete floor slabs. The floor boxes blend in with the decor and their ergonomic design is tailored to users requirements. 896 06 equipped with rteor sockets 896 6 equipped with rteor sockets 896 equipped with rteor sockets Grey floor box with cover for carpet Conform to standard NF EN 60-670 IP30 IK07 Workstation connection for raised floor or concrete floor (using plastic underfloor box, see oppposite page) Supplied with reversible cover for carpet For technical space 75 mm Mounting boxes (for horizontal wiring device positioning): - height adjustable from 75 to 05 mm - ensures perfect cable separation - takes 2 flexible conduits Ø20 mm - offset one from another for optimal connection for all sockets - takes marking labels - to be equipped with rteor sockets (see p. 307) Easy opening cover by rings and holding in open position during connection Pack Cat.No. With adjustable height from 75 to 05 mm to be equipped Floor boxes equipped with empty mounting boxes To be equipped with rteor wiring accessories (p. 307) 2 modules 2 ranges: djustable height (75 to 05 mm) and reduced height (65 mm) for low service spaces R eversible cover: That can be covered (carpet, vinyl, parquet, etc.) and is easy to open (no tool required) F loor boxes: vailable in custom-made solutions for all specific requirements, please consult us 304 896 06 With cover for carpet Grey RL 703 8 modules 896 With cover for carpet Grey RL 703 24 modules 896 6 With cover for carpet Grey RL 703
Floor boxes and underfloor boxes Floor boxes and underfloor boxes n Installation principles Installation n Positioning wiring accessories In floor boxes with adjustable In floor boxes height 65 mm height 75 to 05 mm 896 2 896 26 896 30 896 25 Pack Cat.No. Floor boxes with height reduced to 65 mm Conform to standard NF EN 60 670 IP30 - IK07 For technical space 65 mm For renovation with reduced height technical floor or for concrete floor Supplied with reversible cover Mounting boxes (for vertical wiring device positioning): - supplied with blanking plates requiring sufficient space between the sockets if angled plugs are used - to be equipped with rteor sockets - takes marking labels - ensures perfect cable separation Easy opening cover by rings and holding in open position during connection 0 modules For installing 4x2 modules rteor and 2x module rteor 896 20 With stainless steel cover grey RL 703 896 2 With cover for carpet, grey RL 703 6 modules For installing 8x2 modules rteor 896 25 With stainless steel cover, grey RL 703 896 26 With cover for carpet, grey RL 703 n Choice of plastic underfloor box according to the floor box to be installed Plastic underfloor boxes 05 75 8-48 65 8-48 For integration of floor boxes in concrete floor installations Power supply by flexible conduits Ø6, 20 and 25mm Supplied with polystyrene for easy installation (see opposite) 896 30 For integration of floor boxes 2 modules, or floor boxes with reduced height 0 modules 896 3 For integration of floor boxes 8 modules 896 32 For integration of floor boxes 24 modules, or floor boxes with reduced height 6 modules Cat. No. (mm) (mm) 896 06/20/2 22 252 896 252 252 896 6/25/26 306 252 rteor GPO s, /V and Data Sockets (p. 307) 305
rteor TM Outlets, television and telephone sockets rteor TM udio and video sockets, Cat. 6/Cat. 5e data sockets and adaptors for data sockets 579 07 5723 00 5728 3 R787MWE 5722 72 5722 74 5722 82 5722 8 Pack Cat. No. Socket Outlet 240 V 0 R787MWE 0 single autoswitched socket outlet 2 module, 22.5 x 45 mm 0 R787/5MWE 5 single autoswitched socket outlet 2 module, 22.5 x 45 mm lank modules 0 5723 4 0 5723 42 Television sockets TV sockets 0 579 07 75 ohm F connector for cable and pay TV 0-2.4 GHz (Foxtel recognised) TV sockets International series 0 572 63 TV single shielded "F" type with screws 0-2400 MHz attenuation 2 db 0 572 7 TV single shielded male 9.5 mm 0-2400 MHz RJ and RJ 2 sockets RJ 0 5723 00 4 contacts module 22.5 x 45mm 0 5723 3 4 contacts 2 modules 22.5 x 45mm RJ 2 0 5723 2 6 contacts 2 modules 22.5 x 45mm 5723 5 Pack Cat. No. udio and video sockets 3 x female RC 5722 73 Female 3.5 mm jack 5722 74 YUV 5722 7 module 22.5 x 45 m HDMI 5722 8 Female HD 5* 5722 82 US female sockets 5722 75 * For VG, XG or VES Pack Cat. No. RJ 45 - tool-less system 5723 06 Rapid connection sockets, no tool required Cat. 6 0 5723 02 UTP - 8 contacts 0 5723 4 UTP - 8 contacts Square version Cat. 5e 0 5723 03 UTP - 8 contacts 0 5723 5 UTP - 8 contacts daptors for data sockets Equipped with transparent label-holder Keystone 0 5723 37 daptor for single connector Systimax 0 5723 38 daptor for single connector More rteor wiring devices see rteor catalogue 307