Hinged safety switches, Palladio line Selection diagram CONTACT BLOCKS 0C 0F 0M C F M snap action snap action snap action C F M CABLE AND CONNECTORS S A P KSM KAM Cable output Cable output M connector from top from back from bottom Cable output from bottom (standard) M connector from top COLOURS COMPLEMENTARY HINGES Note: Special colouring only for high quantity request Contact our sales office. HC LL HC AA FIXING PLATES VF SFH-C VF SFH-C VF SFH-C VF SFH-C page /9 General Catalog 00-008
Hinged safety switches, Palladio line Application examples Switch without supports Rear fixing Cable output from back Switch with angular supports for profiles with slots Fixing through internal screws Connector output from bottom Switch with plane supports for profiles with slots Fixing through front screws Cable output from bottom Code structure Contact block 0C, snap action 0F, snap action 0M, snap action C, F, M, C, F, M, article option HP AA00C-SNG Contacts type silver contacts (standard) G silver contacts gold plated µm Type of cable or connector N cable EN 0- black (standard) G cable CEI 0- II grey ( contacts block only) H cable PUR halogen free grey ( contacts block only) M M connector Type of connection cable length m cable length m...... 0 cable length 0 m K with connector Connection output direction S from bottom P from back (cable versions only) A from top COMPLEMENTARY HINGES Code Hinge length HC LL mm HC AA 00, mm General Catalog 00-008 page /0
Hinged safety switches, Palladio line Technical data Housing Metal housing, coated with baked epoxy powder Version with cable integrated with x 0, mm, x 0, mm o 9 x 0, mm wires length m, other lengths on request. Versions with M or 8 poles integrated connector Protection degree: IP screws max driving torque:... Nm Main data New product 00 Metal housing, cable output from top, bottom or back integrated cable types available Versions with M connector Protection degree IP 9 contact blocks with positive opening Complementary hinges without contacts General data Ambient temperature: See table on page / Max operating frequency: 0 operations cycles /hour Mechanical endurance: million operations cycles Max actuating speed: 90 /s Min. actuating speed: /s Assembling position: any Max axial charge: 00 N (preliminary data) Max radial charge: 000 N (preliminary data) () One operation cycle means two movements, one to close and one to open contacts, as foreseen by IEC 09- - standard. In conformity with standards: IEC 09--, EN 09--, IEC 00-, EN 00-, EN 088, EN ISO 00-, EN ISO 00-, IEC 9, EN 09. Markings and quality marks: In conformity with requirements requested by: Low Voltage Directive 00/9/EC, Machinery Directive 00//EC and Electromagnetic Compatibility 00/08/EC. Positive contact opening in conformity with standards: IEC 09--, EN 09--, VDE 00-0. If not expressly indicated in this chapter, for the right installation and the correct utilization of all articles see requirements indicated from page / to page /8. Utilization temperatures Ambient temperature: min. max. Thermal current Ith Rated insulation voltage (Ui): Protection against short circuits (fuse) V Utilization category AC 0 V 0 V 00 V Utilization category DC V V 0 V Version with contacts, fixed laying cable (N, G, U cable) - C +0 C 0 A 00 VAC 0 A 00 V A A A A A 0, A 0, A Version with contacts, dynamic laying cable (H cable) -0 C +80 C 0 A 00 VAC 0 A 00 V A A A A A 0, A 0, A Version with contacts, fixed laying cable (N cable) - C +80 C A 00 VAC A 00 V A A A A A 0, A 0, A Version with contacts, fixed laying cable (N cable) - C +80 C A 00 VAC A 00 V A A A A A 0, A 0, A Version with contacts, poles M connector -0 C +80 C A 0 VAC 0 VDC A 00 V A A A / A 0, A 0, A Version with or contacts, 8 poles M connector -0 C +80 C A VAC VDC A 00V A / / / A / / page / General Catalog 00-008
Hinged safety switches, Palladio line Application field Pizzato Elettrica widens the own range of products making a new series of safety switches hingeshaped named Palladio, where safety and style are melted in one single product. The switch is completely integrated in the mechanical hinge, to result practically invisible to an inexpert eye. This guarantees a higher safety because a switch hard to identify is consequently also more difficult to defeat. The assembly without visible screws and the pleasant line, make the switch perfectly integrated also with guards of modern design machinery. In order to complete the offer complementary hinges with purely mechanics functions are available. Operating point regulation The switches operating point can be regulated through a simple Phillips screwdriver. The operating point regulation allows the setting possibility (up to ) for large guards. After the setting, it s always necessary to close the hole through the suitable supplied safety seal plug. M integrated connector version Versions with connection from the top or the bottom are available with M integrated connector. The application of versions with connector allows a faster wiring when it s necessary to move guards from test line to final user. Opening angle up to 80 The mechanical design of the switch allows the application also onto protections up to 80 opening angle. INNOVATION & DESIGN AWARD 00 This product has been presented at the Innovation & Design award 00 which selects, among all industrial products, those that stand out for technological innovation and their particular design. The switch has been selected by the jury in category Innovation during the fair Enermotive 00. Internal connections With cable () With cable () With cable () With M connector with 8 poles () With M connector with 8 poles () With M connector with poles () black black-white red red-white brown blue violet violet-white black black-white red red-white brown blue yellow-green black grey brown blue yellow-green 8 8 8 8 yellow-green Attention! According to EN 00-, versions with 8 poles M connector can be used only in circuits PELV. General Catalog 00-008 page /
M Hinged safety switches, Palladio line Dimensional drawings Contacts type: R = snap action L = LO = version with m cable from bottom version with m cable from top version with m cable from back 8.9 Ø.. Contact blocks 9 9 9 0C R 0F R 0M R C L F L M L C LO F LO M LO Min. force Travel diagrams HP AA00C-SN HP AA00F-SN HP AA00M-SN HP AA0C-SN HP AA0F-SN HP AA0M-SN HP AA0C-SN HP AA0F-SN HP AA0M-SN page / - group HP AA00C-AN HP AA00F-AN HP AA00M-AN HP AA0C-AN HP AA0F-AN HP AA0M-AN HP AA0C-AN HP AA0F-AN HP AA0M-AN page / - group HP AA00C-PN HP AA00F-PN HP AA00M-PN HP AA0C-PN HP AA0F-PN HP AA0M-PN HP AA0C-PN HP AA0F-PN HP AA0M-PN page / - group Contacts type: R = snap action L = LO = version with M connector from bottom version with M connector from top Mx 0. Travel diagrams table Contact blocks Group M M 0C 0F 0 8 80. 0 8 80. 0. M x 0M 0. 8 80 Contact blocks 0C R 0F R 0M R C L F L M L C LO F LO M LO Min. force Travel diagrams HP AA00C-KSM HP AA00F-KSM HP AA00M-KSM HP AA0C-KSM HP AA0F-KSM HP AA0M-KSM HP AA0C-KSM HP AA0F-KSM HP AA0M-KSM page / - group 9 HP AA00C-KAM HP AA00F-KAM HP AA00M-KAM HP AA0C-KAM HP AA0F-KAM HP AA0M-KAM HP AA0C-KAM HP AA0F-KAM HP AA0M-KAM page / - group 9 C F M C F M 0 80 0 80 0 80 0 80 0 80 0 80 Attention! The hinged safety switch can be combined together exclusively with one or more Pizzato Elettrica hinges (series HP or HC). The use of whichever other hinge does not guarantee the right working of the safety device. page / General Catalog 00-008
Hinged safety switches, Palladio line Complementary hinges AC 0 Protection plug of regulation screw The plug is supplied with every hinge and must always be inserted after the operating point regulation. In case of loss or damage, the plug can be ordered separately. 9 HC AA. HC LL Fixing plates Fixing screw for profile not supplied on issue VF SFH-C Couple of angular supports for HP AA and HC AA supplied with fixing screws for switch VF SFH-C Couple of angular supports for HC LL supplied with fixing screws for switch.. 0 8. 8. 0 0. 8.. 8. 0. 0 9 max max 0 0..... 0.. M. M VF SFH-C Couple of plane supports for HP AA and HC AA supplied with fixing screws for switch VF SFH-C Couple of plane supports for HC LL supplied with fixing screws for switch 0 9 80 8.. 8 8.. 8 Accessories See page / Items with code on the green background are available in stock General Catalog 00-008 page /