FAKULI KEJURUERAAN ELEKRIK UNIVERSII EKNIKAL MALAYSIA MELAKA (UeM) aklimat Semester Khas 18/04/2011 www.themegallery.com
FAKULI KEJURUERAAN ELEKRIK UNIVERSII EKNIKAL MALAYSIA MELAKA (UeM) 1. Pelajar ahun 2 bagi kursus Kejuruteraan Elektrik BEKM, BEKP, BEKE, BEKC Mengambil subjek Amalan Kejurteraan (Engineering Practice) BEKU 2422: ENGINEERING PRACICE BEKU 2432: ENGINEERING PRACICE REPOR empoh 10 minggu (7 minggu di FKE, 3 minggu di lain Fakulti) Yuran penginapan pelajar perlu bayar RM4.00 - HEPA www.themegallery.com
FAKULI KEJURUERAAN ELEKRIK UNIVERSII EKNIKAL MALAYSIA MELAKA (UeM) 2. Pelajar ahun 3 bagi kursus Kejuruteraan Elektrik BEKM, BEKP, BEKE, BEKC Menjalani Latihan Industri di Industri BEKU 3695 Industrial raining empoh 12 minggu (3 bulan) Penginapan diurus oleh pelajar Yuran Pengajian iada telah dimasukkan dalam program www.themegallery.com
FAKULI KEJURUERAAN ELEKRIK UNIVERSII EKNIKAL MALAYSIA MELAKA (UeM) 3. Pelajar ahun 4 bagi kursus Kejuruteraan Elektrik BEKP, BEKE, BEKC, atau tahun 3 DEK Menngambil satu(1) atau dua(2) subjek dengan tujuan untuk bergraduat bagi status subjek UM atau UG dilaksanakan 8 minggu bagi status subjek baru daftar dilaksanakan 14 minggu Penginapan dibayar oleh pelajar Yuran Pengajian dibayar oleh pelajar keputusan akan dimasukkan dalam semester 2, sesi 2010/2011 untuk dapat KBA www.themegallery.com
FAKULI KEJURUERAAN ELEKRIK UNIVERSII EKNIKAL MALAYSIA MELAKA (UeM) 4. Pelajar ahun 4 BEKM Mengambil 2 subjek top-up Yuran penginapan tiada Yuran pengajian tiada atau/dan Menngambil satu(1) atau dua(2) subjek dengan tujuan untuk bergraduat bagi status subjek UM atau UG dilaksanakan 8 minggu bagi status subjek baru daftar dilaksanakan 14 minggu keputusan akan dimasukkan dalam semester 2, sesi 2010/2011 untuk dapat KBA www.themegallery.com
FAKULI KEJURUERAAN ELEKRIK UNIVERSII EKNIKAL MALAYSIA MELAKA (UeM) 4. Pelajar ahun 4 BEKM Mengambil 2 subjek top-up sahaja 14 minggu Yuran penginapan tiada Yuran pengajian tiada atau/dan Menngambil satu(1) atau dua(2) subjek dengan tujuan untuk bergraduat bagi status subjek UM atau UG dilaksanakan 8 minggu bagi status subjek baru daftar dilaksanakan 14 minggu Yuran pengajian ditanggung oleh Pelajar keputusan akan dimasukkan dalam semester 2, sesi 2010/2011 untuk dapat KBA www.themegallery.com
FAKULI KEJURUERAAN ELEKRIK UNIVERSII EKNIKAL MALAYSIA MELAKA (UeM) 5. Pelajar ahun 4 Yang belum mengambil Latihan Industri dan bercadang untuk mengambil bagi tujuan bergraduat tempoh latihan 20 minggu INDUSRIAL RAINING REPOR BEKU 3946 INDUSRIAL RAINING BEKU 3926 keputusan akan dimasukkan dalam semester 2, sesi 2010/2011 untuk dapat KBA www.themegallery.com
FAKULI KEJURUERAAN ELEKRIK UNIVERSII EKNIKAL MALAYSIA MELAKA (UeM) 6. Pelajar ahun 1,2,3 Yang mangulang subjek berstatus UM/UG tempoh pengajian 7 minggu keputusan akan dimasukkan dalam semester 1, sesi 2011/2012 untuk status KB Yuran pengajian dikenakan mengikut bilangan kredit subjek RM20.00 per kredit (Diploma) RM60.00 per kredit (Ijazah) RM50.00 (Yuran Perkhidmatan) www.themegallery.com
LOGO UNIVERSII EKNIKAL MALAYSIA MELAKA (UeM) FAKULI KEJURUERAAN ELEKRIK BEKU 2422: ENGINEERING PRACICE BEKU 2432: ENGINEERING PRACICE REPOR
BEKU 2422: ENGINEERING PRACICE Learning Outcomes Upon completion of this subject, student should be able to: 1. Use appropiate common engineering and technology tools. 2. Obey to safety instruction and practices (KI Ethic and Morale) 3. Describe and interpret symbols, schematic and diagram typically used in wiring, installation and assembly works. 4. Configure and operate winding machine correctly according to the task requirement. 5. Perform electrical wiring and installation, basic troubleshooting and fault finding to rectify problem encountered. 6. Exhibit soft skill such as communication skills and team work spirit.
BEKU 2422: ENGINEERING PRACICE Synopsis Modules to be conducted in this subject are essential in an electrical engineering fields and have not been covered in the normal laboratory subjects. Among the practical works that will be included are relay control, motor starter, auto CAD, domestic wiring, PLC, pneumatic, electrical winding works and troubleshooting. Besides that, student will be also exposed to the basic industrial works and technologies related to field of mechanical, manufacturing and computer engineering tools.
BEKU 2422: ENGINEERING PRACICE ypes of evaluation Course Evaluations Percentage Knowledge (cognitive) 30% Skills (psychomotor) 60% Behaviour (affective) 10% otal 100% Method of assessment 1. Performance assessment will be rubric based (consists of set of criteria and standard performance/rating to be achieved by a student and will cover on the aspect of skills, knowledge and attitude) 2. Knowledge assessment might be varies; calculation, fill in the blanks, record observation and make conclusion or others; depending on the modules requirements Example Rubric
BEKU 2422: ENGINEERING PRACICE DAE: 9 MAY -15 JULY 2011 9 MAY - 27 MAY 2011 Multi-discipline (3 weeks) 30 MAY - 15 JULY 2011 Core (7 weeks) IME: 8 00 AM - 5 00 PM
IME ABLE A FKEKK, FMK, FP, FKM AND FKP Faculty FKEKK FMK MAY WEEK 1 WEEK 2 WEEK 3 9 10 11 12 13 16 18 19 20 21 23 24 25 26 27 MON UE WED HU FRI MON WED HU FRI SA MON UE WED HU FRI Equipment & component Introduction to IPC Simulation tools PSPICE Simulation tools Multi SIM PCB design and fabrication Component assembly and solder Website development using Dreamweaver FP FKM FKP Project management using Microsoft Project Fitting Measurement and Calibration CES EduPack Basic drawing and CAD Fabrication
IME ABLE A FKE Group MEI JUN JULAI Week 4 Week 5 Week 6 Week 7 Week 8 Week 9 Week 10 30 31 1 2 3 6 7 8 9 10 13 14 15 16 17 20 21 22 23 24 27 28 29 30 1 4 5 6 7 8 11 12 13 14 15 M W e F M W F M W F M W F M W h F M W F M W F G1 Module 1 Module 7 Module 6 Module 5 Module 4 Module 3 Module 2 G2 Module 2 Module 1 Module 7 Module 6 Module 5 Module 4 Module 3 G3 Module 3 Module 2 Module 1 Module 7 Module 6 Module 5 Module 4 G4 Module 4 Module 3 Module 2 Module 1 Module 7 Module 6 Module 5 G5 Module 5 Module 4 Module 3 Module 2 Module 1 Module 7 Module 6 G6 Module 6 Module 5 Module 4 Module 3 Module 2 Module 1 Module 7 G7 Module 7 Module 6 Module 5 Module 4 Module 3 Module 2 Module 1 Module 1: Auto CAD Module 2: Domestic Wiring Module 3: Relay Control Module 4: Motor Starter Module 5: PLC Module 6: Pneumatic Module 7: Electrical Winding works & roubleshooting
BEKU 2432: ENGINEERING PRACICE REPOR BEKU 2432 ENGINEERING PRACICE REPOR Learning Outcomes Upon completion of this subject, student should be able to: 1. Explain theory about the modules that have been done. 2. Describe process flow/work procedures that related to the task that been carried out. 3. Record the result that has been acquired from the practical works. 4. Conclude the findings based on the engineering practice works. Synopsis For this subject, student has to prepare and submit technical report regarding on the practical tasks that they have undergone throughout 10 weeks duration of implemetation. he report has to comply format and criterias that will be outlined by the respective faculties.
BEKU 2432: ENGINEERING PRACICE REPOR ypes of evaluation (Individual) Course Evaluations Percentage echnical Report 100% otal 100% SUBMISSION DEADLINE: 22 JULY 2011 Example Rubric
BEKU 2422: ENGINEERING PRACICE COORDINAORS: SUBJEC COORDINAOR 1: EN. ABDUL RAHIM BIN ABDULLAH SUBJEC COORDINAOR 2: EN. KHALIL AZHA B. MOHD ANNUAR MODULE COORDINAORS: MODULE 1 (AUO CAD): PN. NURDIANA BINI NORDIN @ MUSA MODULE 2 (DOMESIC WIRING): EN. AIMIE NAZMIN BIN AZMI MODULE 3 (RELAY CONROL): EN. ABDUL RAHIM BIN ABDULLAH MODULE 4 (MOOR SARER): EN. MOHD KHAIRI BIN MOHD ZAMBRI MODULE 5 (PLC): EN. MOHD RUZAINI BIN HASHIM MODULE 6 (PNEUMAIC): PN. FADILAH BINI ABDUL AZIS MODULE 7 (ELECRICAL WINDING WORKS & ROUBLESHOOING): EN. FAIRUL AZHAR BIN ABDUL SHUKOR
LOGO Please visit: http://www.utem.edu.my/fke/