NetSense Core Node EX datasheet Externally mounted NEMA Connector The Sensity Systems Core Node EX is an integral part of our NetSense platform - an open architecture-based light sensory network that can be deployed along with LED luminaires. We designed the NetSense Core Node EX to instantly convert LED fixtures into IP-enabled sensory nodes. As part of the light sensory network they provide both the lighting control and cloud-based IoT services via a standard NEMA socket. The Core Node EX converts any 3 rd party LED fixture with a NEMA socket into an advanced sensor node Communication and Security The core node connects via standard 802.11 a/b/g/n (Wi-Fi version) wireless communication protocols. It is highly secure with certification based authentication for every device and TLS 128-bit encryption. Sensors Onboard sensors include power and accelerometer sensors. Sensor module include ambient light, PIR motion, and temperature sensors (sold separately). Main Features Multi-sensor wireless communication and control Directly mounts to the luminaire via existing NEMA photocontrol socket (In accordance with ANSI C136.41) Onboard GPS Controls power and light output of LED luminaire Measurement and reporting on electrical and sensor data Utility grade power metering Provides auxiliary power to additional devices Monitors status of LED luminaire and network Embedded antenna Measurement and Control The Core Node EX is connected to incoming AC mains and the LED driver. This direct connection provides on/off control and performance monitoring of the luminaire. Luminaire dimming control follows 0-10VDC dimming standard. Power monitoring and measurement is achieved by an onboard Energy Management IC. Onboard microcontroller manages data communication, sensor control, fault management and status reporting. 1237 E. Arques Avenue, Sunnyvale, CA 94085 940-0015-00_r02 1 1
Core Node Specifications Product Attribute 120-277V Config. 480V Config. AC Input Voltage 120-277V 480V AC Output Voltage (Load and Aux) 120-277V 480V Max Power Consumption (no Aux. load) 2W (typ is 80%) 2.2W (typ 80%) Total AC Current Input (Load and Aux) 5A 2A Max AC Current to LED Luminaire 3A 1A Max AC Current to Aux. Output 2A 1A AC Load Current Switching Yes Yes AC Aux Current Switching Yes Yes Dimming Control Output 0-10VDC 0-10VDC Weight 1.0lb 1.5lbs Color (In accordance with ANSI C136.41 specification) Blue Yellow Utility Grade Metering Accuracy <0.5% when operating with load PF of 0.9 Dimensions Water Ingress Operating Temperature GPS Accuracy On board sensor 5.5 height x 5 diameter IP65 when installed in vertical mounting orientation in NEMA twist-lock -30C to 55C 2.5m (clear open sky) Accelerometer, power sensor Sensor Pod Specifications Product Attribute On Board Sensor Motion Sensor Max. Mounting Height Motion Sensor Beam Spread Temperature Sensor Accuracy Operating Voltage Sensor Pod Specification Motion(PIR), ambient light, temperature 40ft 1x mounting height +/- 2C 5v Avg. Power Consumption 0.3W Operating Temperature Dimension Mounting Method Power Connection -30C to 55C 2 7/8 diameter External, horizontal or vertical pole mount Sensity approved components and configurations Note: Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice. 1237 E. Arques Avenue, Sunnyvale, CA 94085 940-0015-00_r02 22
Mechanical Dimensions for Core Node EX (in mm) Mechanical Dimensions for External Sensor Pod (in mm) *Sensor Pod shown with horizontal mounting bracket 1237 E. Arques Avenue, Sunnyvale, CA 94085 940-0015-00_r02 33
Core Node Ordering Guide Core Node EX S90-000062 Core Node EX, NEMA, WiFi, 120-277V S90-000063 Core Node EX, NEMA, WiFi, 480V Core Node EX and Sensor Kit Power cables sold separately (see Accessories below) S80-000079 Core Node EX, NEMA, WiFi, 120-277V with Sensor Pod and Sensor Mounting Bracket S80-000080 Core Node EX, NEMA, WiFi, 480V with Sensor Pod and Sensor Mounting Bracket Core Node Accessories S95-000083 Power Cable (North America), Core Node to External Sensor Pod, 4ft, 120-277V S95-000096 Power Cable (North America), Core Node to External Sensor Pod, 4ft, 480V S95-000085 Power Cable (ROW), Core Node to External Sensor Pod, 1.2m S95-000102 Power Cable (North America), Core Node to External Sensor Pod, 2ft, 120-277V S95-000103 Power Cable (North America), Core Node to External Sensor Pod, 2ft, 480V S95-000104 Power Cable (ROW), Core Node to External Sensor Pod, 0.6m S90-000064 External Sensor Pod, Core Node EX S95-000080 T-Splitter for Power Cable, 120-277V (NA and ROW) S95-000090 T-Splitter for Power Cable, 480V 1237 E. Arques Avenue, Sunnyvale, CA 94085 940-0015-00_r02 4 4
Regulatory/Compliance The Core Node EX complies to the following regulatory standards Category EMC Standards FCC CFR 47 Part 15, Subpart B (2015), Class A ICES-003 (Issue 5, August 2012), Class A EN 61000-3-2:2014 EN 61000-3-3:2013 EN 301 489-1:2008 EN 301 489-17:2012 AS/NZS CISPR 22:2009 AS/NZS CISPR 24:2013 ANSI C63.4:2014 CISPR 22:2010 + AC:2011 CISPR 24:2010 Radio FCC CFR 47 Part 15, Subpart C FCC CFR 47 Part 15, Subpart E FCC CFR 47 Part 2 FCC 06-96 FCC KDB 789033; FCC KDB 905462 D02 and D03 ANSI C63.10:2009 (FCC); ANSI C63.10-2013 (IC) Industry Canada RSS-247 (Issue 1) RSS-GEN Issue 4 EN 300 328 v1.8.1 EN 301 893 v1.7.1; EN 301 893 v1.8.1 Health & Safety UL 773A UL 244A CAN/CSA-C22.2 No. 182.2-M1987 CAN/CSA-C22.2 No. 205-12 (1983) EN 61347-2-11:2001 EN 61347-1:2008+A1:2011+A2:2013 IEC 61347-2-11(First Edition):2001 and IEC 61347-1(Second Edition):2007+A1:2010+A2:2012 EN 60730-1:2011 IEC 60730-1(ed.4) FCC 47 CFR Part 1, Subpart I; FCC 47 CFR Part 2, Subpart J Industry Canada RSS 102 issue 3 EN 50385:2002 1237 E. Arques Avenue, Sunnyvale, CA 94085 940-0015-00_r02 55