Semi conductor fuses PSC 690 V DIN 4620
URD 690 VAC Semiconductor Fuses PSC - URD 690 VAC Ferraz Shawmut PSC-URD 690 VAC fuse-links provide maximum flexibility in equipment design and ultimate protection for today s power conversion equipment. This range is a fast acting, engineered to provide state of the art protection for power semiconductors such as diodes, thyristors. These square body fuse-links are available in various body sizes with a broad range of ampere ratings allowing the greatest flexibility in equipment design. They have pure silver fuse elements embedded in solidified sand which provides optimized I2t and high interrupting rating. All contact surfaces are plated and all hardware non-magnetic. All fuses are standard with a low voltage blown fuse indicator. This indicator can operate a microswitch which is easily mounted directly onto the fuse in service. Beige melted Red non melted FEATURES Ultra fast acting Highly current limiting. High breaking capacities Very low I 2 t Worldwide mounting acceptance. Superior cycling ability. High widstanding in rush current and overloads APPLICATIONS Protection of rectifiers, inverters, static switch, AC & DC drives and UPS systems. INOVATIONS Double indicator(visual and mechanical). Largest range of the market Connexion improvement between trip indicator - Micro switch Cd / Pb free Low voltage indicator - V Ratings AC: up to 0 A 690 VAC -70 ka IR DC: Consult Factory Approvals AC: Tested to IEC 269.4 Features/Benefits Broad range of ampere ratings in each body size for design flexibility IEC 269-4 compliance for fuses for worldwide semiconductor applications 2
Semiconductor Fuses German standard PSC - 690VAC URD - DIN 4 620 blades Voltage Size Type Rating Pre-Arcing Total I 2 t Pn: Power losses (W) Breaking In I 2 t @ ms @ 690 V PV 4620 capacities @ Un (A) ka 2 s ka 2 s 0,8In URD 6 8,0 URD 20 5 90,5 URD 25 22 0 2,0 URD 2 45 270 2,5 URD 69 4,0 URD 07 0 5,0 URD 220 00 6,0 690 V 000 URD 2 000 8,0 URD 720 4 00 9,5 URD 8 0,5 URD 2 2 5,0 URD 900 22 8,0 URD 7 600 44 22,0 URD 5 90 0,0 URD 20 5 90,5 URD 25 22 0 2,0 URD 2 45 270 2,5 URD 69 4,0 URD 0 0 5,0 URD 220 00 6,0 690 V 00 URD 2 000 8,0 70 URD 720 4 00 8,5 URD 90 8 0,0 URD 2 2 4,0 URD 900 22 7,0 URD 7 600 44 20,0 URD 5 90 29,0 URD 2 2 70 9,5 URD 5 2 0,0 URD 87 470 0,5 URD 0,5 URD 970 2,5 70 690 V 0 URD 90 2 0 5,0 URD 720 890 8,0 URD 5 8 20 22,0 URD 2 9 5 900 27,0 URD 5 560 29 900,0 URD 600 62 00,0 URD 690 VAC Time/current characteristics see page 7,8,9 Cut off characteristics see page 7,8,9 Total I 2 t and total operating time see page 7,8,9 Other curves see page 0 Fuse holder derating page 0
URD 690 VAC Semiconductor Fuses German standard PSC - 690VAC URD - DIN 4 620 blades Voltage Size Type Rating Pre-Arcing Total I 2 t Pn: Power losses (W) Breaking In I 2 t @ ms @ 690 V PV 4620 capacities @ Un (A) ka 2 s ka 2 s 0,8In URD 0 8 URD 220 70 2,5 URD 290 570 2,0 URD 620 20 26,0 690 V URD 70 6 270 29,0 URD 2 470 00,0 70 URD 4 670 25 7,0 URD 9 570 5 42,0 URD 72 00 44,0 URD 9 0 05 000 48,0 URD 960 5 8 URD 70 9 220 42 URD 4 8 46,5 URD 6 860 6 900 54,0 URD 9 570 5 58,0 690 V 2 URD 72 00 62,5 70 URD 4 2 000 000 69,0 URD 0 27 47 000 7,0 URD 560 8 00 206 000 78,0 URD 0 58 000 85,0 URD 78 420 000 87,0 URD 5 25 28 57,0 URD 7 562 600 58,0 URD 00 56 0 65,5 URD 4 5 84 00 70,0 URD 0 22 9 000 75,0 70 690 V URD 560 0 000,0 URD 0 42 000 226 000 89,0 URD 6 2 000,0 URD 0 88 900 478 000 2,0 URD 900 2 900 666 000,0 URD 0 78 959 000,0 4
Semiconductor Fuses German standard PSC - 690VAC URD - DIN 4 620 blades Size Catalog Number Reference Weight Packaging Number (g) 000 00 0 6,9 URD 000 PV 006 6,9 URD 000 PV 0020 6,9 URD 000 PV 0025 6,9 URD 000 PV 002 6,9 URD 000 PV 00 6,9 URD 000 PV 00 6,9 URD 000 PV 00 6,9 URD 000 PV 00 6,9 URD 000 PV 0 6,9 URD 000 PV 0 6,9 URD 000 PV 0 6,9 URD 000 PV 0 6,9 URD 000 PV 0 6,9 URD 000 PV 0 Neutral Extraction puller 6,9 URD 00 PV 0020 6,9 URD 00 PV 0025 6,9 URD 00 PV 002 6,9 URD 00 PV 00 6,9 URD 00 PV 00 6,9 URD 00 PV 00 6,9 URD 00 PV 00 6,9 URD 00 PV 0 6,9 URD 00 PV 0 6,9 URD 00 PV 0 6,9 URD 00 PV 0 6,9 URD 00 PV 0 6,9 URD 00 PV 0 Neutral Extraction puller 6,9 URD 0 PV 002 6,9 URD 0 PV 00 6,9 URD 0 PV 00 6,9 URD 0 PV 00 6,9 URD 0 PV 00 6,9 URD 0 PV 0 6,9 URD 0 PV 0 6,9 URD 0 PV 0 6,9 URD 0 PV 0 6,9 URD 0 PV 0 6,9 URD 0 PV 0 Neutral Extraction puller P5C R7C T9C Y4C C47C G5C L55C Q59C VC X65C B69C D7C H75C M79C Z28269J P25592A A207C C209C G204C L2047C Q205C V2055C Z2059C D20C F2065C K2069C M207C R2075C W2079C Z28269J P25592A Q2024C V20247C Z2025C D20255C H20259C M202C P20265C T20269C W2027C A20275C E20279C Z2904J P25592A 5 0 0 0 P URD 690 VAC Microswitches MS 4L 2-5 B6 + PRES F2056C (6,mm clips) MS 4L 2-5 B2 + PRES G2057C (2.8 mm clips) Automatically resetable, these microswitch systems indicate fuse presence (PRES) and proper mounting In case of improper mounting or fuse melting, this is indicated (terminal -4 closed) Size A B C H L M N P R T 000 20,8,5 52,5 5 79,5,5 4,4 49,5 5 0.82".59" 2.07" 0.59"." 0.5" 0.5".7".95".8" 00 29,5 47,5 59,5 5 79,, 4,4 5.6".87" 2.4" 0.59"." 0.52" 0.52".7".97".8" 0 29,5 47,5 59,5 5 29, 29, 4,4 66 5.6".87" 2.4" 0.59" 4.92".5".5".7" 2.60".8" Fuse holder solution, see p. Microswitches supplied seperately 5
URD 690 VAC Semiconductor Fuses German standard PSC - 690VAC URD - DIN 4 620 blades Size Catalog Number Reference Weight Packaging Number (g) 2 6,9 URD PV 00 6,9 URD PV 00 6,9 URD PV 0 6,9 URD PV 0 6,9 URD PV 0 6,9 URD PV 0 6,9 URD PV 0 6,9 URD PV 0 6,9 URD PV 0 6,9 URD PV 0 Neutral Extraction puller 6,9 URD 2 PV 0 6,9 URD 2 PV 0 6,9 URD 2 PV 0 6,9 URD 2 PV 0 6,9 URD 2 PV 0 6,9 URD 2 PV 0 6,9 URD 2 PV 04 6,9 URD 2 PV 00 6,9 URD 2 PV 05 6,9 URD 2 PV 00 6,9 URD 2 PV 0 Neutral Extraction puller 6,9 URD PV 0 6,9 URD PV 0 6,9 URD PV 0 6,9 URD PV 04 6,9 URD PV 00 6,9 URD PV 05 6,9 URD PV 00 6,9 URD PV 0 6,9 URD PV 00 6,9 URD PV 0900 6,9 URD PV 0 Neutral Extraction puller M2055C K2099C W20C Y2065C C2069C E207C J2075C N2079C P20C S208C A2984E P25592A L20469C N2047C S20475C X20479C Y204C B2048C D20485C F20487C G20488C H20489C J20490C N22254E P25592A F20579A G205A K2058A M20585A P20587A Q20588A R20589A S20590A T2059A V20592A W2059A E2205E P25592A 600 7 5 5 5 P Microswitches MS 4L 2-5 B6 + PRES F2056C (6,mm clips) MS 4L 2-5 B2 + PRES G2057C (2.8 mm clips) Automatically resetable, these microswitch systems indicate fuse presence (PRES) and proper mounting In case of improper mounting or fuse melting, this is indicated (terminal -4 closed) Size A B C H L M N P R T 9,5 52,5 64,5 20 5 2, 2, 4,4 68.56" 2.07" 2.54" 0.79" 5.2".26".26".7" 2.68".57" 2 5 60 72 26 8,85 8,85 4,4 68 48 2.0" 2.6" 2.85".02" 5.9".5".5".7" 2.68".89" 70 74 86 8,85 8,85 4,4 68 60 2.76" 2.9".9".0" 5.9".5".5".7" 2.68" 2.6" Fuse holder solution, see p. Microswitches supplied seperately 6
Semiconductor Fuses German standard PSC - 690VAC URD - DIN 4 620 blades Times/Current Characteristics t (s) 0 0 0 6 20 25 C 2 Size 000 a = 0 B =,25 A2 = 0,6 B2 = 0,6 Cf = 0,8 C' t (s) 0 0 0 20 C 25 2 Size 00 a = 0 B =,25 A2 = 0,6 B2 = 0,6 Cf = 0,8 C' URD 690 VAC 0-0 - 0-2 0-2 0-0 - 0-4 0-4 Cut off characteristics - Peak let thru current Ic(kA) Ic = 2.5 Ip Ic = 2 Ip c(ka) Size 000 Size 00 2 25 20 6 Ic = 2.5 Ip Ic = 2 Ip 2 25 20 0 6 Total I 2 t and total operating time @ 690 V Size 000 I 2t(A 2s) 0.0 ms (.00 ms) 6.0 ms (0. ms) 0 6 0.0 ms (5.00 ms) 8.0 ms (.60 ms) 4.0 ms (0. ms) Ip (ka) 0 6 I 2t(A 2s) Size 00 0.0 ms (.00 ms) 6.0 ms (0. ms) 0.0 ms (5.00 ms) 8.0 ms (.60 ms) 4.0 ms (0. ms) Ip (ka) 2 25 20 6 Value between parentheses pertain to prearcing I 2 t 2 25 20 0 0 7
URD 690 VAC Semiconductor Fuses German standard PSC - 690VAC URD - DIN 4 620 blades Times/Current Characteristics t (s) 0 2 C Size 0 a = 0 B =,25 A2 = 0,6 B2 = 0,6 Cf = 0,8 C' t (s) 0 C C' Size a = 0 B =,25 A2 = 0,6 B2 = 0,6 Cf = 0,8 0 0 0 0 0-0 - 0-2 0-2 0-0 - 0-4 0-4 Cut off characteristics - Peak let thru current Ic(kA) Ic = 2.5 Ip Ic = 2 Ip Size 0 c(ka) Size 2 Ic = 2.5 Ip Ic = 2 Ip 0 6 Ip (ka) 0 6 Ip (ka) Total I 2 t and total operating time @ 690 V I 2t(A 2s) Size 0 0.0 ms (.00 ms) 6.0 ms (0. ms) 2 I t(a 2 0.0 ms (5.00 ms) 8.0 ms (.60 ms) 4.0 ms (0. ms) s) Size 0.0 ms (.00 ms) 6.0 ms (0. ms) 0.0 ms (5.00 ms) 8.0 ms (.60 ms) 4.0 ms (0. ms) 2 Value between parentheses pertain to prearcing I 2 t 8
Semiconductor Fuses German standard PSC - 690VAC URD - DIN 4 620 blades Times/Current Characteristics t (s) 0 C 4 560 0 0 Size 2 a = 0 B =,25 A2 = 0,6 B2 = 0,6 Cf = 0,8 C' t (s) 0 C 4 560 900 0 0 0 0 Size a = 0 B =,25 A2 = 0,6 B2 = 0,6 Cf = 0,8 C' URD 690 VAC 0 0 0 0 0-0 - 0-2 0-2 0-0 - 0-4 0-4 Cut off characteristics - Peak let thru current Ic(kA) Ic = 2.5 Ip Ic = 2 Ip Size 2 Size 0 560 0 4 Ic(kA) Ic = 2.5 Ip Ic = 2 Ip 0 900 0 0 560 0 4 0 6 Ip (ka) 0 6 Ip (ka) Total I 2 t and total operating time @ 690 V Size 2 0.0 ms (.00 ms) 6.0 ms (0. ms) 2 2 I t(a s) 0.0 ms (5.00 ms) 8.0 ms (.60 ms) 4.0 ms (0. ms) 0 6 Size 2 2 I t(a s) 0.0 ms (5.00 ms) 0 7 0.0 ms (.00 ms) 8.0 ms (.60 ms) 6.0 ms (0. ms) 0 560 0 4 Value between parentheses pertain to prearcing I 2 t 0 6 0 900 0 0 560 0 4 9
00 0 600 URD 690 VAC Semiconductor Fuses German standard PSC - 690VAC URD - DIN 4 620 blades k=f(u) Multiplier coefficient to calculate total I 2 t and total operating time K.4 P/PN Multiplier coefficient to calculate the power losses at various currents P/PN 2,0 Peak arc voltage Um(V).2,8,6,4 0 0 00 0.8,2,0 0.6 0,8 0 0.4 0,6 900 0 0.2 0,4 0,2 600 0 U(V) 0 0,5 0,6 0,7 0,8 0,9 I/IN 0 00 0 600 U(V) Derating in fuse holders - Derating for plastic bases (see page, picture ) 2- Derating for switch-disconnectors BS and Multivert (see page, picture 2) - Derating for fused switch-disconnectors ITC (see page, picture ) 4- Derating for fused switch-disconnectors ITC with finger safe protection (see page, picture 4) Size 000 Size 00 Size 0 In 2 4 In 2 4 6,00,00,00,00 20,00,00,00,00 25,00,00,00,00 2,00,00,00,00,00,00,00,00,00,00 0,90 0,90,00,00 0,90 0,90,00 0,90 0,75 0,75,00 0,90 0,75 0,75,00 0,85 0,70 0,70 0,90 0,75 0,60 0,60 0,85 0,70 0,55 0,55 0,75 0,60 0, 0, 0,70 0,55 0,45 0,45 20,00,00,00,00 25,00,00,00,00 2,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 0,95 0,95 0,95,00 0,90 0,90 0,90,00 0,85 0,85 0,85 0,90 0,75 0,75 0,75 0,85 0,70 0,70 0,70 0, 0,65 0,65 0,65 0,70 0,55 0,55 0,55 2,00,00,00,00 0,95 0,95 0,85 0,85 0, 0,75 0,65 Size Size 2 Size,00 0,95,00,00 0,95 0,85 0,95 0,90 0,85 0,75 0,85 0, 0,85 0,75 0,85 0, 0, 0,70 0, 0,75 0, 0,70 0, 0,70 0,75 0,70 0,75 0,70 0,75 0,65 0,75 0,70 0,70 0,65 0,70 0,65 0,65 0,60 0,65 0,60 0,90 0, 0,90 0,85 0,85 0,75 0,85 0, 0,85 0,70 0, 0,75 0,75 0,65 0,70 0,65 0,70 0,65 0,70 0,65 0,70 0,60 0,70 0,60 4 0,70 0,60 0,65 0,60 0 0,70 0,60 0,65 0,60 5 0,65 0,60 0,65 0,60 0 0,65 0,55 0,65 0,60 0,60 0,55 0,60 0,55 0,85 0,75 0, 0,75 0,85 0,75 0, 0,75 0, 0,70 0,75 0,70 4 0, 0,70 0,75 0,70 0 0,75 0,65 0,75 0,70 5 0,75 0,65 0,75 0,70 0 0,70 0,60 0,70 0,65 0,70 0,60 0,65 0,60 0 0,65 0,55 0,60 0,55 900 0,60 0, 0,60 0,55 0 0,60 0, 0,55 0, 0
Semiconductor Fuses German standard PSC - 690VAC URD - DIN 4 620 blades Bases and fuse holders 2 Ref. R2992C Ref. V29277A Ref. J22679A Ref. E725A Type Characteristics Poles Size 000/00 Size 0 Size Size 2 Size Fuse holder Unprotected (4) R2692C T2824C A22008C E2075C X2644C screw connection 2 F28758B G28759B G796B V2595B B2454B for hole and bar terminals V29277A W29278A Y20A D2209A F24664A for 5mm Din rail 4 Z22007C H222486A H20855A R22627A K2574A Unprotected (4) F2570C N26695C E28757C F2085C W264C screw connection 2 A2722B B272B F222484B S259B D24662B for holes or bar terminals F2772A G27724A Y22006A B2207A H2572A for panels 4 S29275A R2829A X209A C24A L2568A Finger Safe Protected S282C G22677C P226724C R226726C T226728C screw connection for hole and bar terminals for DIN rail G222485A J22679A Q226725A S226727A V226729A Horizontal Class AC22 4 2 Ref. Y2205C S22292A -4 Ref. R20729A W220A Y2070A T278A Bases and fuse holders Switchdisconnector Fused switchdisconnector front handle N26626A N222882A Horizontal 2 B28685A Linocur AC2 C2078A Y2205A W2574A Vertical Multivert E725A T20267A Q20759A Z2206A ITC III K227824A M22886A Q2082A P208A ITCP III F209A ITC III complete () G20824A ITC III complete () K227824A ITC III complete (2) ITC III complete ITC 0 III complete ITC 0 III complete () Impossible to use microswitch (2) The axis of operation must be fragmented if the heighten (Y20770A) is not used - Internal or external control. () Necessary heighten for the use of microswitch (F2056C or G2057C) (4) Unprotected against accidental contact-not finger safe Warning : for all holders, please check maximum fuse and fuse holder operating limit. N2080A + Y20770A () Q2082A + Y20770A () P208A + Y20770A () W229674A + Y20770A ()
, rue Jean Novel 69626 VILLEURBANNE Cedex - FRANCE Tél. (0)4 72 22 66 - Fax (0)4 72 22 67 www.ferrazshawmut.com Your contact 74 Merrimac Street Newburyport, MA 09 - USA Tél. (978) 462-6662 - Fax (978) 462-08 www.ferrazshawmut.com Edition 07/2 Ref.: G60042A Data herein contained are provided for general information purpose only and are not binding. FERRAZ SHAWMUT shall have no liability whatsoever with respect to information contained herein. Duplication, reproduction or translation of any information contained herein, in whole or in part, is strictly prohibited without prior written consent of FERRAZ SHAWMUT.