RiLine Compact The smart power distribution system

Power distribution in a confined space Rittal are the leading suppliers of reliable power distribution and backup systems for controlgear. The new RiLine Compact is the tested system solution for compact power distribution in enclosures and small control cabinets. The 4.5 mm pitch pattern available throughout means that no valuable space is wasted on busbar supports etc. Different unit types are often used which would require conventional wiring. With the new RiLine Compact, a variety of different designs can be used safely and with no loss of space both standardised and standard-compliant. 3

Tool-free assembly made easy The RiLine Compact system is based on a board with integral circuit board conductors and a contact pitch pattern throughout. The board and all components are simply top-mounted; no tools required. Securing the components simultaneously ensures a secure electrical connection to the all-round shock-hazard-protected board. The contact pitch pattern of the RiLine Compact system allows the assemblies to be positioned wherever they are required. 5

Safe adaptor connection The RiLine Compact adaptor supports fast connection of cables and devices. The screw-free connection technology in the adaptor means that conductors are quickly connected, and the contact point itself is completely maintenance-free. The miniature connectors with preassembled connection cables satisfy the special requirements of standard IEC 61439, for safe, space-saving assembly of switchgear and protective gear. 7

Space-saving installation of function modules RiLine Compact function modules are used to control motor drives or to regulate thermal components. The motor controller has an exceptionally space-saving design and requires 50% less space than a conventionally wired motor control unit. It is suitable for use with direct and reversing starter combinations. The electronic power switch is used for switchedmode heating controls. The hybrid technology creates a low-loss electronic power switch which is particularly gentle on the switching contacts; this in turn helps to extend the service life. 9

Guaranteed global use Approvals to IEC and UL Fire protection corresponding to UL94 V0 Use of equipment from any manufacturer 10

RiLine Compact Board 225 mm and 405 mm versions With 5 or 9 horizontal pitches (HP) @ 45 mm All-round contact hazard protection Up to 125 A From page 12 Adaptor Busbar connection adaptor with spring terminal block Basic and Comfort adaptor New: Build width 22.5 mm with integral fuse holder From page 13 Function modules For motor and reversing starters up to 4 kw For heating control With electronic overload protection From page 14 11

RiLine Compact Board Adaptors Page13 Function modules Page 14 Function: Shock-hazard-protected board for the safe accommodation and contacting of components in the RiLine Compact system Material: PA & PC Fire protection corresponding to UL 94-V0 Colour: RAL 7035 Approvals: For the IEC and UL markets Board Width mm Packs of 225 405 Height mm 160 160 Depth mm 45.1 45.1 Rated max. current A 125 IEC / 96 UL 125 IEC / 96 UL Rated operating voltage V, AC 690 IEC / 600 UL 690 IEC / 600 UL Rated operating voltage V, DC 600 600 Number of poles 3-pole 3-pole Bar centre distance mm 60 60 No. of space units @ 45 mm 5 9 For DIN support rail attachment For screw attachment Model No. 1 pc(s). 9635.000 9635.010 12 Further technical information available on the internet.

Adaptors Board Page 12 Accessories Page 15 Function of busbar connection adaptor: For direct mounting on the board, for connecting conductors up to 16 mm² using spring terminal blocks Function of component adaptor: For direct mounting on the board, for simple assembly of switchgear and protective gear with support rail attachment plus electrical connection Material: PA Fire protection corresponding to UL 94-V0 Colour: RAL 7035 Approvals: For the IEC and UL markets Version Busbar connection adaptor Component adaptor 22.5 mm Component adaptor 45 mm, Basic Rated max. current A 80 16 16 32 Rated operating voltage V, AC 690 IEC / 600 UL 690 IEC / 600 UL 690 IEC / 600 UL 690 IEC / 600 UL Rated operating voltage V, DC 600 600 600 600 Number of poles 3-pole 3-pole 3-pole 3-pole Conductor outlet Top/bottom Connection clamp, conductor cross-section AWG 16-6 Connection of Cu round conductors, fine wire with/without wire end ferrule mm² 1.5 16 Connection of Cu round conductors, single-wire mm² 1.5 10 Max. connection of multiple round conductors Cu mm² 16 Connection cables, AWG version 14 14 10 Connection cables, length mm 125 120 100 Conditional rated short-circuit current Icc ka 50 For fuse 10 x 38 mm/class CC (max. 16 A) No. of fixed support rails/height mm 1/10 1/10 Height mm 160 160 160 160 Width mm 22.5 22.5 45 45 Depth mm 115.5 80.2 34.5 34.5 Model No. 9635.200 9635.300 9635.310 9635.320 Packs of 4 pc(s). 1 pc(s). 4 pc(s). 4 pc(s). Version Packs of Component adaptor 45 mm, Comfort Rated max. current A 16 25 32 45 Rated operating voltage V, AC 690 IEC / 600 UL 690 IEC / 600 UL 690 IEC / 600 UL 690 IEC / 600 UL Rated operating voltage V, DC 600 600 600 600 Number of poles 3-pole 3-pole 3-pole 3-pole Connection cables, AWG version 14 12 10 8 Connection cables, length mm 120 100 100 100 No. of adjustable support rails/height mm 1/10 1/10 1/10 1/10 Height mm 160 160 160 160 Width mm 45 45 45 45 Depth mm 34.5 34.5 34.5 34.5 Model No. 4 pc(s). 9635.330 9635.340 9635.350 9635.360 Further technical information available on the internet. 13

Function modules Board Page 12 Function: Motor controllers for controlling drives, for mounting on the board. May be used both as a direct starter and as a reversing starter. Function: Electronic power switch with hybrid technology for switchedmode heating control, for mounting on the board. The hybrid technology permits higher switching frequencies. Material: PA Fire protection corresponding to UL 94-V0 Colour: RAL 7035 Motor controllers Rated max. current A Packs of 0.6 2.4 9.0 Rated operating voltage V, AC 500 500 500 Rated frequency Hz 50/60 50/60 50/60 Heat loss W 2.8 5.5 12 Adjustable current monitoring A 0.075 0.6 0.18 2.4 1.5 9 Number of poles 3-pole 3-pole 3-pole Connection clamp, conductor cross-section mm² 0.14 2.5 0.14 2.5 0.14 2.5 Height mm 160 160 160 Width mm 22.5 22.5 22.5 Depth mm 114 114 114 For fuses 10 x 38 mm gr 20 A 10 x 38 mm gr 20 A 10 x 38 mm gr 20 A Conditional rated short-circuit current Icc ka 5 5 5 Application area IEC/UL IEC/UL IEC/UL Model No. 1 pc(s). 9635.400 9635.410 9635.420 Electronic power switch Rated max. current A Packs of 25 25 IEC / 20 UL Rated operating voltage V, AC 400 500 Rated frequency Hz 50/60 50/60 Heat loss W 20 20 Adjustable current monitoring A 16/20/25 16/20/25 Number of poles 3-pole 3-pole Connection clamp, conductor cross-section mm² 0.2 6 0.2 6 Height mm 160 160 Width mm 36 36 Depth mm 130 130 For fuses 10 x 38 mm 32 A Class CC 30 A Conditional rated short-circuit current Icc ka 30 30 Application area IEC IEC/UL Model No. 1 pc(s). 9635.500 9635.510 14 Further technical information available on the internet.

RiLine Compact Accessories Support rail/positioner For use in conjunction with the Comfort 45 mm component adaptor, for attaching equipment and reversing combinations. Material: PA Fire protection corresponding to UL 94-V0 Colour: RAL 9005 1 Version Width Assigned switchgear Packs of Model No. Support rail 45 mm 10 pc(s). 9635.600 Positioner 55 mm 45 mm Siemens S00, S0 10 pc(s). 9635.610 Positioner 35 mm 45 mm Eaton PKZ/PKE size 1 & 2 10 pc(s). 9635.620 2 3 Further technical information available on the internet. 15

Enclosures Power Distribution Climate Control IT Infrastructure Software & Services You can find the contact details of all Rittal companies throughout the world here. XWW00112EN1611 www.rittal.com/contact